path: root/arch/arm/boot/dts/imx27-phytec-phycore-som.dts

/*
 * Copyright 2012 Sascha Hauer, Pengutronix
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx27.dtsi"

/ {
	model = "Phytec pcm038";
	compatible = "phytec,imx27-pcm038", "fsl,imx27";

	memory {
		reg = <0x0 0x0>;
	};

	soc {
		aipi@10000000 { /* aipi1 */
			serial@1000a000 {
				status = "okay";
			};

			i2c@1001d000 {
				clock-frequency = <400000>;
				status = "okay";
				at24@52 {
					compatible = "at,24c32";
					pagesize = <32>;
					reg = <0x52>;
				};
				pcf8563@51 {
					compatible = "nxp,pcf8563";
					reg = <0x51>;
				};
				lm75@4a {
					compatible = "national,lm75";
					reg = <0x4a>;
				};
			};
		};

		aipi@10020000 { /* aipi2 */
			ethernet@1002b000 {
				phy-reset-gpios = <&gpio3 30 0>;
				status = "okay";
			};
		};
	};

	nor_flash@c0000000 {
		compatible = "cfi-flash";
		bank-width = <2>;
		reg = <0xc0000000 0x02000000>;
		linux,mtd-name = "physmap-flash.0";
		#address-cells = <1>;
		#size-cells = <1>;
	};
};

&cspi1 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio4 28 0>;
	status = "okay";

	pmic: mc13783@0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mc13783";
		spi-max-frequency = <20000000>;
		reg = <0>;
		interrupt-parent = <&gpio2>;
		interrupts = <23 0x4>;
		fsl,mc13xxx-uses-adc;
		fsl,mc13xxx-uses-rtc;

		regulators {
			sw1a_reg: sw1a {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
				regulator-boot-on;
			};

			sw1b_reg: sw1b {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1200000>;
				regulator-always-on;
				regulator-boot-on;
			};

			sw2a_reg: sw2a {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			sw2b_reg: sw2b {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			sw3_reg: sw3 {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5000000>;
				regulator-always-on;
				regulator-boot-on;
			};

			vaudio_reg: vaudio {
				regulator-always-on;
				regulator-boot-on;
			};

			violo_reg: violo {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			viohi_reg: viohi {
				regulator-always-on;
				regulator-boot-on;
			};

			vgen_reg: vgen {
				regulator-min-microvolt = <1500000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			vcam_reg: vcam {
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
			};

			vrf1_reg: vrf1 {
				regulator-min-microvolt = <2775000>;
				regulator-max-microvolt = <2775000>;
				regulator-always-on;
				regulator-boot-on;
			};

			vrf2_reg: vrf2 {
				regulator-min-microvolt = <2775000>;
				regulator-max-microvolt = <2775000>;
				regulator-always-on;
				regulator-boot-on;
			};

			vmmc1_reg: vmmc1 {
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3000000>;
			};

			gpo1_reg: gpo1 { };

			pwgt1spi_reg: pwgt1spi {
				regulator-always-on;
			};
		};
	};
};

&nfc {
	nand-bus-width = <8>;
	nand-ecc-mode = "hw";
	status = "okay";
};