/*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rv1108-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "rockchip,rv1108";
interrupt-parent = <&gic>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@f00 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
clocks = <&cru ARMCLK>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <75>;
operating-points-v2 = <&cpu_opp_table>;
};
};
cpu_opp_table: opp_table {
compatible = "operating-points-v2";
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <975000>;
clock-latency-ns = <40000>;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <40000>;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <40000>;
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1150000>;
clock-latency-ns = <40000>;
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
};
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdma: pdma@102a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x102a0000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC>;
clock-names = "apb_pclk";
};
};
bus_intmem@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x10080000 0x2000>;
};
uart2: serial@10210000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10210000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "disabled";
};
uart1: serial@10220000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10220000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
};
uart0: serial@10230000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10230000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "disabled";
};
i2c1: i2c@10240000 {
compatible = "rockchip,rv1108-i2c";
reg = <0x10240000 0x1000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
clock-names = "i2c", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
rockchip,grf = <&grf>;
status = "disabled";
};
i2c2: i2c@10250000 {
compatible = "rockchip,rv1108-i2c";
reg = <0x10250000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
clock-names = "i2c", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c2m1_xfer>;
rockchip,grf = <&grf>;
status = "disabled";
};
i2c3: i2c@10260000 {
compatible = "rockchip,rv1108-i2c";
reg = <0x10260000 0x1000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
clock-names = "i2c", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
rockchip,grf = <&grf>;
status = "disabled";
};
spi: spi@10270000 {
compatible = "rockchip,rv1108-spi";
reg = <0x10270000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
clock-names = "spiclk", "apb_pclk";
dmas = <&pdma 8>, <&pdma 9>;
#dma-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm4: pwm@10280000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280000 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm4_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm5: pwm@10280010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280010 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm5_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm6: pwm@10280020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280020 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm6_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm7: pwm@10280030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280030 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pin>;
#pwm-cells = <3>;
status = "disabled";
};
grf: syscon@10300000 {
compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
reg = <0x10300000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
u2phy: usb2-phy@100 {
compatible = "rockchip,rv1108-usb2phy";
reg = <0x100 0x0c>;
clocks = <&cru SCLK_USBPHY>;
clock-names = "phyclk";
#clock-cells = <0>;
clock-output-names = "usbphy";
rockchip,usbgrf = <&usbgrf>;
status = "disabled";
u2phy_otg: otg-port {
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "otg-mux";
#phy-cells = <0>;
status = "disabled";
};
u2phy_host: host-port {
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
#phy-cells = <0>;
status = "disabled";
};
};
};
watchdog: wdt@10360000 {
compatible = "snps,dw-wdt";
reg = <0x10360000 0x100>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_WDT>;
clock-names = "pclk_wdt";
status = "disabled";
};
thermal-zones {
soc_thermal: soc-thermal {
polling-delay-passive = <20>;
polling-delay = <1000>;
sustainable-power = <50>;
thermal-sensors = <&tsadc 0>;
trips {
threshold: trip-point0 {
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
target: trip-point1 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
soc_crit: soc-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&target>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
};
};
};
tsadc: tsadc@10370000 {
compatible = "rockchip,rv1108-tsadc";
reg = <0x10370000 0x100>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <750000>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
pinctrl-names = "init", "default", "sleep";
pinctrl-0 = <&otp_gpio>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
rockchip,hw-tshut-temp = <120000>;
#thermal-sensor-cells = <1>;
status = "disabled";
};
adc: adc@1038c000 {
compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
reg = <0x1038c000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
clock-frequency = <1000000>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
status = "disabled";
};
i2c0: i2c@20000000 {
compatible = "rockchip,rv1108-i2c";
reg = <0x20000000 0x1000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>;
clock-names = "i2c", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
rockchip,grf = <&grf>;
status = "disabled";
};
pwm0: pwm@20040000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040000 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm1: pwm@20040010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040010 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm2: pwm@20040020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040020 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm3: pwm@20040030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040030 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pmugrf: syscon@20060000 {
compatible = "rockchip,rv1108-pmugrf", "syscon";
reg = <0x20060000 0x1000>;
};
usbgrf: syscon@202a0000 {
compatible = "rockchip,rv1108-usbgrf", "syscon";
reg = <0x202a0000 0x1000>;
};
cru: clock-controller@20200000 {
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
emmc: dwmmc@30110000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30110000 0x4000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
status = "disabled";
};
sdio: dwmmc@30120000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30120000 0x4000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
status = "disabled";
};
sdmmc: dwmmc@30130000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30130000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <100000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "disabled";
};
usb_host_ehci: usb@30140000 {
compatible = "generic-ehci";
reg = <0x30140000 0x20000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
};
usb_host_ohci: usb@30160000 {
compatible = "generic-ohci";
reg = <0x30160000 0x20000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
};
usb_otg: usb@30180000 {
compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x30180000 0x40000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
phys = <&u2phy_otg>;
phy-names = "usb2-phy";
status = "disabled";
};
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x32011000 0x1000>,
<0x32012000 0x2000>,
<0x32014000 0x2000>,
<0x32016000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
pinctrl: pinctrl {
compatible = "rockchip,rv1108-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20030000 {
compatible = "rockchip,gpio-bank";
reg = <0x20030000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@10310000 {
compatible = "rockchip,gpio-bank";
reg = <0x10310000 0x100>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@10320000 {
compatible = "rockchip,gpio-bank";
reg = <0x10320000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@10330000 {
compatible = "rockchip,gpio-bank";
reg = <0x10330000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
drive-strength = <8>;
};
pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
drive-strength = <12>;
};
pcfg_pull_none_smt: pcfg-pull-none-smt {
bias-disable;
input-schmitt-enable;
};
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
bias-pull-up;
drive-strength = <8>;
};
pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
drive-strength = <4>;
};
pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
bias-pull-up;
drive-strength = <4>;
};
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_input_high: pcfg-input-high {
bias-pull-up;
input-enable;
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>,
<0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
};
};
i2c2m1 {
i2c2m1_xfer: i2c2m1-xfer {
rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
};
i2c2m1_gpio: i2c2m1-gpio {
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c2m05v {
i2c2m05v_xfer: i2c2m05v-xfer {
rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
};
i2c2m05v_gpio: i2c2m05v-gpio {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm4 {
pwm4_pin: pwm4-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>;
};
};
pwm5 {
pwm5_pin: pwm5-pin {
rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm6 {
pwm6_pin: pwm6-pin {
rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm7 {
pwm7_pin: pwm7-pin {
rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_cd: sdmmc-cd {
rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
};
tsadc {
otp_out: otp-out {
rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
};
otp_gpio: otp-gpio {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_rts_gpio: uart0-rts-gpio {
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart2m0 {
uart2m0_xfer: uart2m0-xfer {
rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart2m1 {
uart2m1_xfer: uart2m1-xfer {
rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
};
};
uart2_5v {
uart2_5v_cts: uart2_5v-cts {
rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
};
uart2_5v_rts: uart2_5v-rts {
rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
};
