/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include <mach/common.h>
#include <mach/hardware.h>
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
void __iomem *wdog_base;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
wdog_base = of_iomap(np, 0);
if (!wdog_base)
goto soft;
imx_src_prepare_restart();
/* enable wdog */
writew_relaxed(1 << 2, wdog_base);
/* write twice to ensure the request will not get ignored */
writew_relaxed(1 << 2, wdog_base);
/* wait for reset to assert ... */
mdelay(500);
pr_err("Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);
soft:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
if (IS_ENABLED(CONFIG_PHYLIB)) {
/* min rx data delay */
phy_write(phydev, 0x0b, 0x8105);
phy_write(phydev, 0x0c, 0x0000);
/* max rx/tx clock delay, min rx/tx control delay */
phy_write(phydev, 0x0b, 0x8104);
phy_write(phydev, 0x0c, 0xf0f0);
phy_write(phydev, 0x0b, 0x104);
}
return 0;
}
static void __init imx6q_sabrelite_cko1_setup(void)
{
struct clk *cko1_sel, *ahb, *cko1;
unsigned long rate;
cko1_sel = clk_get_sys(NULL, "cko1_sel");
ahb = clk_get_sys(NULL, "ahb");
cko1 = clk_get_sys(NULL, "cko1");
if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
pr_err("cko1 setup failed!\n");
goto put_clk;
}
clk_set_parent(cko1_sel, ahb);
rate = clk_round_rate(cko1, 16000000);
clk_set_rate(cko1, rate);
clk_register_clkdev(cko1, NULL, "0-000a");
put_clk:
if (!IS_ERR(cko1_sel))
clk_put(cko1_sel);
if (!IS_ERR(ahb))
clk_put(ahb);
if (!IS_ERR(cko1))
clk_put(cko1);
}
static void __init imx6q_sabrelite_init(void)
{
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
imx6q_sabrelite_cko1_setup();
}
static void __init imx6q_init_machine(void)
{
/*
* This should be removed when all imx6q boards have pinctrl
* states for devices defined in device tree.
*/
pinctrl_provide_dummies();
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
imx6q_sabrelite_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
}
static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
imx_scu_map_io();
imx6q_clock_map_io();
}
static const struct of_device_id imx6q_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
{ /* sentinel */ }
};
static void __init imx6q_init_irq(void)
{
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
of_irq_init(imx6q_irq_match);
}
static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
twd_local_timer_of_register();
}
static struct sys_timer imx6q_timer = {
.init = imx6q_timer_init,
};
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
"fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
.dt_compat = imx6q_dt_compat,
.restart = imx6q_restart,
MACHINE_END
