/*
* Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*
* Create static mapping between physical to virtual memory.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
#include <linux/of_address.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
#include "hardware.h"
#include "iomux-v3.h"
/*
* Define the MX51 memory map.
*/
static struct map_desc mx51_io_desc[] __initdata = {
imx_map_entry(MX51, TZIC, MT_DEVICE),
imx_map_entry(MX51, IRAM, MT_DEVICE),
imx_map_entry(MX51, AIPS1, MT_DEVICE),
imx_map_entry(MX51, SPBA0, MT_DEVICE),
imx_map_entry(MX51, AIPS2, MT_DEVICE),
};
/*
* Define the MX53 memory map.
*/
static struct map_desc mx53_io_desc[] __initdata = {
imx_map_entry(MX53, TZIC, MT_DEVICE),
imx_map_entry(MX53, AIPS1, MT_DEVICE),
imx_map_entry(MX53, SPBA0, MT_DEVICE),
imx_map_entry(MX53, AIPS2, MT_DEVICE),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx51_map_io(void)
{
iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
}
void __init mx53_map_io(void)
{
iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}
/*
* The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
* the Freescale marketing division. However this did not remove the
* hardware from the chip which still needs to be configured for proper
* IPU support.
*/
static void __init imx51_ipu_mipi_setup(void)
{
void __iomem *hsc_addr;
hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR);
/* setup MIPI module to legacy mode */
__raw_writel(0xf00, hsc_addr);
/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
hsc_addr + 0x800);
}
void __init imx51_init_early(void)
{
imx51_ipu_mipi_setup();
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
imx_src_init();
}
void __init imx53_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX53);
imx_src_init();
}
void __init mx51_init_irq(void)
{
tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
}
void __init mx53_init_irq(void)
{
struct device_node *np;
void __iomem *base;
np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
base = of_iomap(np, 0);
WARN_ON(!base);
tzic_init_irq(base);
}
static struct sdma_platform_data imx51_sdma_pdata __initdata = {
.fw_name = "sdma-imx51.bin",
};
static const struct resource imx51_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx51_soc_init(void)
{
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
mxc_device_init();
/* i.mx51 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
pinctrl_provide_dummies();
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
/* Setup AIPS registers */
imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
/* i.mx51 has the i.mx31 type audmux */
platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
ARRAY_SIZE(imx51_audmux_res));
}
void __init imx51_init_late(void)
{
mx51_neon_fixup();
imx5_pm_init();
}
void __init imx53_init_late(void)
{
imx5_pm_init();
}
