/*
* Copyright (C) 2010 Linaro Limited
*
* based on code from the following
* Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
* Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
#include <mach/i2c.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
#include "devices.h"
#define MX51_USB_PLL_DIV_24_MHZ 0x01
#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
/* board 1.1 doesn't have same reset gpio */
#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
/* the pci ids pin have pull up. they're driven low according to board id */
#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
static iomux_v3_cfg_t mx51efikamx_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
/* board id */
MX51_PAD_PCBID0,
MX51_PAD_PCBID1,
MX51_PAD_PCBID2,
/* SD 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
MX51_PAD_SD1_CLK__SD1_CLK,
MX51_PAD_SD1_DATA0__SD1_DATA0,
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
/* SD 2 */
MX51_PAD_SD2_CMD__SD2_CMD,
MX51_PAD_SD2_CLK__SD2_CLK,
MX51_PAD_SD2_DATA0__SD2_DATA0,
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
/* SD/MMC WP/CD */
MX51_PAD_GPIO_1_0__ESDHC1_CD,
MX51_PAD_GPIO_1_1__ESDHC1_WP,
MX51_PAD_GPIO_1_7__ESDHC2_WP,
MX51_PAD_GPIO_1_8__ESDHC2_CD,
/* leds */
MX51_PAD_CSI1_D9__GPIO_3_13,
MX51_PAD_CSI1_VSYNC__GPIO_3_14,
MX51_PAD_CSI1_HSYNC__GPIO_3_15,
/* power key */
MX51_PAD_PWRKEY,
/* spi */
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SS0__GPIO_4_24,
MX51_PAD_CSPI1_SS1__GPIO_4_25,
MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
/* reset */
MX51_PAD_DI1_PIN13__GPIO_3_2,
MX51_PAD_GPIO_1_4__GPIO_1_4,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
static const struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, &uart_pdata);
imx51_add_imx_uart(2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
{
}
#endif /* SERIAL_IMX */
/* This function is board specific as the bit mask for the plldiv will also
* be different for other Freescale SoCs, thus a common bitmask is not
* possible and cannot get place in /plat-mxc/ehci.c.
*/
static int initialize_otg_port(struct platform_device *pdev)
{
u32 v;
void __iomem *usb_base;
void __iomem *usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* Set the PHY clock to 19.2MHz */
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
v |= MX51_USB_PLL_DIV_24_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
/* PCBID2 PCBID1 PCBID0 STATE
1 1 1 ER1:rev1.1
1 1 0 ER2:rev1.2
1 0 1 ER3:rev1.3
1 0 0 ER4:rev1.4
*/
static void __init mx51_efikamx_board_id(void)
{
int id;
/* things are taking time to settle */
msleep(150);
gpio_request(EFIKAMX_PCBID0, "pcbid0");
gpio_direction_input(EFIKAMX_PCBID0);
gpio_request(EFIKAMX_PCBID1, "pcbid1");
gpio_direction_input(EFIKAMX_PCBID1);
gpio_request(EFIKAMX_PCBID2, "pcbid2");
gpio_direction_input(EFIKAMX_PCBID2);
id = gpio_get_value(EFIKAMX_PCBID0);
id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
switch (id) {
case 7:
system_rev = 0x11;
break;
case 6:
system_rev = 0x12;
break;
case 5:
system_rev = 0x13;
break;
case 4:
system_rev = 0x14;
break;
default:
system_rev = 0x10;
break;
}
if ((system_rev == 0x10)
|| (system_rev == 0x12)
|| (system_rev == 0x14)) {
printk(KERN_WARNING
"EfikaMX: Unsupported board revision 1.%u!\n",
system_rev & 0xf);
}
}
static struct gpio_led mx51_efikamx_leds[] = {
{
.name = "efikamx:green",
.default_trigger = "default-on",
.gpio = EFIKAMX_GREEN_LED,
},
{
.name = "efikamx:red",
.default_trigger = "ide-disk",
.gpio = EFIKAMX_RED_LED,
},
{
.name = "efikamx:blue",
.default_trigger = "mmc0",
.gpio = EFIKAMX_BLUE_LED,
},
};
static struct gpio_led_platform_data mx51_efikamx_leds_data = {
.leds = mx51_efikamx_leds,
.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
};
static struct platform_device mx51_efikamx_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mx51_efikamx_leds_data,
},
};
static struct gpio_keys_button mx51_efikamx_powerkey[] = {
{
.code = KEY_POWER,
.gpio = EFIKAMX_POWER_KEY,
.type = EV_PWR,
.desc = "Power Button (CM)",
.wakeup = 1,
.debounce_interval = 10, /* ms */
},
};
static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
.buttons = mx51_efikamx_powerkey,
.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
};
static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_256K,
},
{
.name = "config",
.offset = MTDPART_OFS_APPEND,
.size = SZ_64K,
},
};
static struct flash_platform_data mx51_efikamx_spi_flash_data = {
.name = "spi_flash",
.parts = mx51_efikamx_spi_nor_partitions,
.nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
.type = "sst25vf032b",
};
static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 25000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = &mx51_efikamx_spi_flash_data,
.irq = -1,
},
};
static int mx51_efikamx_spi_cs[] = {
EFIKAMX_SPI_CS0,
EFIKAMX_SPI_CS1,
};
static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
.chipselect = mx51_efikamx_spi_cs,
.num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
};
void mx51_efikamx_reset(void)
{
if (system_rev == 0x11)
gpio_direction_output(EFIKAMX_RESET1_1, 0);
else
gpio_direction_output(EFIKAMX_RESET, 0);
}
static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
mx51_efikamx_board_id();
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_init_imx_uart();
imx51_add_sdhci_esdhc_imx(0, NULL);
/* on < 1.2 boards both SD controllers are used */
if (system_rev < 0x12) {
imx51_add_sdhci_esdhc_imx(1, NULL);
mx51_efikamx_leds[2].default_trigger = "mmc1";
}
platform_device_register(&mx51_efikamx_leds_device);
imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
spi_register_board_info(mx51_efikamx_spi_board_info,
ARRAY_SIZE(mx51_efikamx_spi_board_info));
imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
if (system_rev == 0x11) {
gpio_request(EFIKAMX_RESET1_1, "reset");
gpio_direction_output(EFIKAMX_RESET1_1, 1);
} else {
gpio_request(EFIKAMX_RESET, "reset");
gpio_direction_output(EFIKAMX_RESET, 1);
}
}
static void __init mx51_efikamx_timer_init(void)
{
mx51_clocks_init(32768, 24000000, 22579200, 24576000);
}
static struct sys_timer mxc_timer = {
.init = mx51_efikamx_timer_init,
};
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
.boot_params = MX51_PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = mxc_board_init,
.timer = &mxc_timer,
MACHINE_END
