if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA27X_DT
bool "Support PXA27x platforms from device tree"
select PINCTRL
select POWER_SUPPLY
select PXA27x
select USE_OF
help
Include support for Marvell PXA27x based platforms using
the device tree. Needn't select any other machine while
MACH_PXA27X_DT is enabled.
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
select PINCTRL
select POWER_SUPPLY
select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
the device tree. Needn't select any other machine while
MACH_PXA3XX_DT is enabled.
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
select SA1111
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
config MACH_ZYLONITE
bool
select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select CPU_PXA320
select MACH_ZYLONITE
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select CPU_PXA930
select CPU_PXA935
select PXA3xx
select FB
select FB_PXA
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select CPU_PXA930
select CPU_PXA935
select PXA3xx
select FB
select FB_PXA
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select ARCOM_PCMCIA
select I2C_GPIO if I2C=y
select ISA
select PXA25x
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select ARCOM_PCMCIA
select ISA
select PXA27x
config MACH_BALLOON3
bool "Balloon 3 board"
select IWMMXT
select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
depends on MACH_CSB726
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
choice
prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select IWMMXT
select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select IWMMXT
select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select MTD
select MTD_CFI
select MTD_CFI_INTELEXT
select MTD_PHYSMAP
select PXA25x
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select PXA27x
select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select MACH_TRIZEPS4
select PXA27x
select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config ARCOM_PCMCIA
bool
help
Generic option for Arcom Viper/Zeus PCMCIA
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select IWMMXT
select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select CPU_PXA320
select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
config MACH_VPAC270
bool "Voipac PXA270"
select HAVE_PATA_PLATFORM
select PXA27x
help
PXA270 based Single Board Computer.
comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
select IWMMXT
select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config PXA_EZX
bool "Motorola EZX Platform"
select IWMMXT
select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
config MACH_PALM27X
bool
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config PALM_TREO
bool
depends on ARCH_PXA_PALM
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_PARAM
select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config PXA_SHARPSL_DETECT_MACH_ID
bool "Detect machine ID at run-time in the decompressor"
depends on PXA_SHARPSL
help
Say Y here if you want the zImage decompressor to detect
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select I2C
select I2C_PXA
select MACH_SPITZ
select PXA27x
select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA && NET
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select FB_W100
select PXA25x
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E350
bool "Toshiba e350"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
select PXA27x
endmenu
config PXA25x
bool
select CPU_XSCALE
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
select CPU_XSCALE
help
Select code specific to PXA27x variants
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
config PXA3xx
bool
select CPU_XSC3
help
Select code specific to PXA3xx variants
config CPU_PXA300
bool
select PXA3xx
help
PXA300 (codename Monahans-L)
config CPU_PXA310
bool
select CPU_PXA300
select PXA310_ULPI if USB_ULPI
help
PXA310 (codename Monahans-LV)
config CPU_PXA320
bool
select PXA3xx
help
PXA320 (codename Monahans-P)
config CPU_PXA930
bool
select PXA3xx
help
PXA930 (codename Tavor-P)
config CPU_PXA935
bool
select CPU_PXA930
help
PXA935 (codename Tavor-P65)
config PXA_SHARP_C7xx
bool
select SHARPSL_PM
help
Enable support for all Sharp C7xx models
config PXA_SHARP_Cxx00
bool
select SHARPSL_PM
help
Enable common support for Sharp Cxx00 models
config SHARPSL_PM
bool
select APM_EMULATION
select SHARPSL_PM_MAX1111
config SHARPSL_PM_MAX1111
bool
select HWMON
select SENSORS_MAX1111
select SPI
select SPI_MASTER
config PXA310_ULPI
bool
config PXA_SYSTEMS_CPLDS
tristate "Motherboard cplds"
default ARCH_LUBBOCK || MACH_MAINSTONE
help
This driver supports the Lubbock and Mainstone multifunction chip
found on the pxa25x development platform system (Lubbock) and pxa27x
development platform system (Mainstone). This IO board supports the
interrupts handling, ethernet controller, flash chips, etc ...
endif
