/*
* Support for Sharp SL-C7xx PDAs
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/corgi.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include <video/w100fb.h>
#include "generic.h"
/*
* Corgi SCOOP Device
*/
static struct resource corgi_scoop_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
};
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &corgi_scoop_setup,
},
.num_resources = ARRAY_SIZE(corgi_scoop_resources),
.resource = corgi_scoop_resources,
};
/*
* Corgi SSP Device
*
* Set the parent as the scoop device because a lot of SSP devices
* also use scoop functions and this makes the power up/down order
* work correctly.
*/
static struct platform_device corgissp_device = {
.name = "corgi-ssp",
.dev = {
.parent = &corgiscoop_device.dev,
},
.id = -1,
};
/*
* Corgi w100 Frame Buffer Device
*/
static struct w100fb_mach_info corgi_fb_info = {
.w100fb_ssp_send = corgi_ssp_lcdtg_send,
.comadj = -1,
.phadadj = -1,
};
static struct resource corgi_fb_resources[] = {
[0] = {
.start = 0x08000000,
.end = 0x08ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device corgifb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &corgi_fb_info,
.parent = &corgissp_device.dev,
},
.num_resources = ARRAY_SIZE(corgi_fb_resources),
.resource = corgi_fb_resources,
};
/*
* Corgi Backlight Device
*/
static struct platform_device corgibl_device = {
.name = "corgi-bl",
.dev = {
.parent = &corgifb_device.dev,
},
.id = -1,
};
/*
* MMC/SD Device
*
* The card detect interrupt isn't debounced so we delay it by HZ/4
* to give the card a chance to fully insert/eject.
*/
static struct mmc_detect {
struct timer_list detect_timer;
void *devid;
} mmc_detect;
static void mmc_detect_callback(unsigned long data)
{
mmc_detect_change(mmc_detect.devid);
}
static irqreturn_t corgi_mmc_detect_int(int irq, void *devid, struct pt_regs *regs)
{
mmc_detect.devid=devid;
mod_timer(&mmc_detect.detect_timer, jiffies + HZ/4);
return IRQ_HANDLED;
}
static int corgi_mci_init(struct device *dev, irqreturn_t (*unused_detect_int)(int, void *, struct pt_regs *), void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
init_timer(&mmc_detect.detect_timer);
mmc_detect.detect_timer.function = mmc_detect_callback;
mmc_detect.detect_timer.data = (unsigned long) &mmc_detect;
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_mmc_detect_int, SA_INTERRUPT,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
return 0;
}
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
} else {
printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
}
}
static void corgi_mci_exit(struct device *dev, void *data)
{
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
del_timer(&mmc_detect.detect_timer);
}
static struct pxamci_platform_data corgi_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = corgi_mci_init,
.setpower = corgi_mci_setpower,
.exit = corgi_mci_exit,
};
/*
* USB Device Controller
*/
static void corgi_udc_command(int cmd)
{
switch(cmd) {
case PXA2XX_UDC_CMD_CONNECT:
GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
break;
}
}
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; corgi can't tell connection status */
.udc_command = corgi_udc_command,
};
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgissp_device,
&corgifb_device,
&corgibl_device,
};
static void __init corgi_init(void)
{
corgi_fb_info.comadj=sharpsl_param.comadj;
corgi_fb_info.phadadj=sharpsl_param.phadadj;
pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_corgi(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
if (machine_is_corgi())
mi->bank[0].size = (32*1024*1024);
else
mi->bank[0].size = (64*1024*1024);
}
static void __init corgi_init_irq(void)
{
pxa_init_irq();
}
static struct map_desc corgi_io_desc[] __initdata = {
/* virtual physical length */
/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */
/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */
{ 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
};
static void __init corgi_map_io(void)
{
pxa_map_io();
iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x0158C000;
PGSR1 = 0x00FF0080;
PGSR2 = 0x0001C004;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
}
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,)
.fixup = fixup_corgi,
.map_io = corgi_map_io,
.init_irq = corgi_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,)
.fixup = fixup_corgi,
.map_io = corgi_map_io,
.init_irq = corgi_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,)
.fixup = fixup_corgi,
.map_io = corgi_map_io,
.init_irq = corgi_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
