/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* Device Tree file for Marvell Armada 8040 Development board platform
*/
#include <dt-bindings/gpio/gpio.h>
#include "armada-8040.dtsi"
/ {
model = "Marvell Armada 8040 DB board";
compatible = "marvell,armada8040-db", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cpm-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "cpm-usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
cpm_usb3_0_phy: cpm-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_0_vbus>;
};
cpm_usb3_1_phy: cpm-usb3-1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cpm_reg_usb3_1_vbus>;
};
cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "cps-usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
};
cps_usb3_0_phy: cps-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cps_reg_usb3_0_vbus>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xce0000>;
};
};
};
};
/* Accessible over the mini-USB CON9 connector on the main board */
&uart0 {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
/* CON5 on CP0 expansion */
&cpm_pcie2 {
status = "okay";
};
&cpm_i2c0 {
status = "okay";
clock-frequency = <100000>;
/* U31 */
expander0: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
};
/* U25 */
expander1: pca9555@25 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x25>;
};
};
/* CON4 on CP0 expansion */
&cpm_sata0 {
status = "okay";
};
/* CON9 on CP0 expansion */
&cpm_usb3_0 {
usb-phy = <&cpm_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP0 expansion */
&cpm_usb3_1 {
usb-phy = <&cpm_usb3_1_phy>;
status = "okay";
};
&cpm_mdio {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&cpm_ethernet {
status = "okay";
};
&cpm_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
&cpm_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
};
&cps_i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&cps_spi1 {
status = "okay";
spi-flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Boot";
reg = <0x0 0x200000>;
};
partition@200000 {
label = "Filesystem";
reg = <0x200000 0xd00000>;
};
partition@f00000 {
label = "Boot_2nd";
reg = <0xf00000 0x100000>;
};
};
};
};
/* CON4 on CP1 expansion */
&cps_sata0 {
status = "okay";
};
/* CON9 on CP1 expansion */
&cps_usb3_0 {
usb-phy = <&cps_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP1 expansion */
&cps_usb3_1 {
status = "okay";
};
&cps_mdio {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&cps_ethernet {
status = "okay";
};
&cps_eth0 {
status = "okay";
phy-mode = "10gbase-kr";
};
&cps_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
non-removable;
};
&cpm_sdhci0 {
status = "okay";
bus-width = <8>;
non-removable;
};
