/* SPDX-License-Identifier: GPL-2.0
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
* Copyright (C) 2003 - 2008 Paul Mundt
*/
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
! to be jumped is too far, but it causes illegal slot exception.
/*
* entry.S contains the system-call and fault low-level handling routines.
* This also contains the timer-interrupt handler, as well as all interrupts
* and faults that can result in a task-switch.
*
* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*
* NOTE: This code uses a convention that instructions in the delay slot
* of a transfer-control instruction are indented by an extra space, thus:
*
* jmp @k0 ! control-transfer instruction
* ldc k1, ssr ! delay slot
*
* Stack layout in 'ret_from_syscall':
* ptrace needs to have all regs on the stack.
* if the order here is changed, it needs to be
* updated in ptrace.c and ptrace.h
*
* r0
* ...
* r15 = stack pointer
* spc
* pr
* ssr
* gbr
* mach
* macl
* syscall #
*
*/
#include <asm/dwarf.h>
#if defined(CONFIG_PREEMPT)
# define preempt_stop() cli ; TRACE_IRQS_OFF
#else
# define preempt_stop()
# define resume_kernel __restore_all
#endif
.align 2
ENTRY(exception_error)
!
TRACE_IRQS_ON
sti
mov.l 1f, r0
jmp @r0
nop
.align 2
1: .long do_exception_error
.align 2
ret_from_exception:
CFI_STARTPROC simple
CFI_DEF_CFA r14, 0
CFI_REL_OFFSET 17, 64
CFI_REL_OFFSET 15, 60
CFI_REL_OFFSET 14, 56
CFI_REL_OFFSET 13, 52
CFI_REL_OFFSET 12, 48
CFI_REL_OFFSET 11, 44
CFI_REL_OFFSET 10, 40
CFI_REL_OFFSET 9, 36
CFI_REL_OFFSET 8, 32
preempt_stop()
ENTRY(ret_from_irq)
!
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shll r0
shll r0 ! kernel space?
get_current_thread_info r8, r0
bt resume_kernel ! Yes, it's from kernel, go back soon
#ifdef CONFIG_PREEMPT
bra resume_userspace
nop
ENTRY(resume_kernel)
cli
TRACE_IRQS_OFF
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
need_resched:
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
bt noresched
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shlr r0
and #(0xf0>>1), r0 ! interrupts off (exception path)?
cmp/eq #(0xf0>>1), r0
bt noresched
mov.l 1f, r0
jsr @r0 ! call preempt_schedule_irq
nop
bra need_resched
nop
noresched:
bra __restore_all
nop
.align 2
1: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
! r8: current_thread_info
cli
TRACE_IRQS_OFF
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #(_TIF_WORK_MASK & 0xff), r0
bt/s __restore_all
tst #_TIF_NEED_RESCHED, r0
.align 2
work_pending:
! r0: current_thread_info->flags
! r8: current_thread_info
! t: result of "tst #_TIF_NEED_RESCHED, r0"
bf/s work_resched
tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0
work_notifysig:
bt/s __restore_all
mov r15, r4
mov r12, r5 ! set arg1(save_r0)
mov r0, r6
sti
mov.l 2f, r1
mov.l 3f, r0
jmp @r1
lds r0, pr
work_resched:
mov.l 1f, r1
jsr @r1 ! schedule
nop
cli
TRACE_IRQS_OFF
!
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #(_TIF_WORK_MASK & 0xff), r0
bt __restore_all
bra work_pending
tst #_TIF_NEED_RESCHED, r0
.align 2
1: .long schedule
2: .long do_notify_resume
3: .long resume_userspace
.align 2
syscall_exit_work:
! r0: current_thread_info->flags
! r8: current_thread_info
tst #(_TIF_WORK_SYSCALL_MASK & 0xff), r0
bt/s work_pending
tst #_TIF_NEED_RESCHED, r0
TRACE_IRQS_ON
sti
mov r15, r4
mov.l 8f, r0 ! do_syscall_trace_leave
jsr @r0
nop
bra resume_userspace
nop
.align 2
syscall_trace_entry:
! Yes it is traced.
mov r15, r4
mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies
jsr @r11 ! superior (will chomp R[0-7])
nop
mov.l r0, @(OFF_R0,r15) ! Save return value
! Reload R0-R4 from kernel stack, where the
! parent may have modified them using
! ptrace(POKEUSR). (Note that R0-R2 are
! reloaded from the kernel stack by syscall_call
! below, so don't need to be reloaded here.)
! This allows the parent to rewrite system calls
! and args on the fly.
mov.l @(OFF_R4,r15), r4 ! arg0
mov.l @(OFF_R5,r15), r5
mov.l @(OFF_R6,r15), r6
mov.l @(OFF_R7,r15), r7 ! arg3
mov.l @(OFF_R3,r15), r3 ! syscall_nr
!
mov.l 2f, r10 ! Number of syscalls
cmp/hs r10, r3
bf syscall_call
mov #-ENOSYS, r0
bra syscall_exit
mov.l r0, @(OFF_R0,r15) ! Return value
__restore_all:
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shlr2 r0
and #0x3c, r0
cmp/eq #0x3c, r0
bt 1f
TRACE_IRQS_ON
bra 2f
nop
1:
TRACE_IRQS_OFF
2:
mov.l 3f, r0
jmp @r0
nop
.align 2
3: .long restore_all
.align 2
syscall_badsys: ! Bad syscall number
get_current_thread_info r8, r0
mov #-ENOSYS, r0
bra resume_userspace
mov.l r0, @(OFF_R0,r15) ! Return value
/*
* The main debug trap handler.
*
* r8=TRA (not the trap number!)
*
* Note: This assumes that the trapa value is left in its original
* form (without the shlr2 shift) so the calculation for the jump
* call table offset remains a simple in place mask.
*/
debug_trap:
mov r8, r0
and #(0xf << 2), r0
mov.l 1f, r8
add r0, r8
mov.l @r8, r8
jsr @r8
nop
bra ret_from_exception
nop
CFI_ENDPROC
.align 2
1: .long debug_trap_table
/*
* Syscall interface:
*
* Syscall #: R3
* Arguments #0 to #3: R4--R7
* Arguments #4 to #6: R0, R1, R2
* TRA: See following table.
*
* (TRA>>2) Purpose
* -------- -------
* 0x00-0x0f original SH-3/4 syscall ABI (not in general use).
* 0x10-0x1f general SH-3/4 syscall ABI.
* 0x1f unified SH-2/3/4 syscall ABI (preferred).
* 0x20-0x2f original SH-2 syscall ABI.
* 0x30-0x3f debug traps used by the kernel.
* 0x40-0xff Not supported by all parts, so left unhandled.
*
* For making system calls, any trap number in the range for the
* given cpu model may be used, but the unified trap number 0x1f is
* preferred for compatibility with all models.
*
* The low bits of the trap number were once documented as matching
* the number of arguments, but they were never actually used as such
* by the kernel. SH-2 originally used its own separate trap range
* because several hardware exceptions fell in the range used for the
* SH-3/4 syscall ABI.
*
* This code also handles delegating other traps to the BIOS/gdb stub.
*
* Note: When we're first called, the TRA value must be shifted
* right 2 bits in order to get the value that was used as the "trapa"
* argument.
*/
.align 2
.globl ret_from_fork
ret_from_fork:
mov.l 1f, r8
jsr @r8
mov r0, r4
bra syscall_exit
nop
.align 2
.globl ret_from_kernel_thread
ret_from_kernel_thread:
mov.l 1f, r8
jsr @r8
mov r0, r4
mov.l @(OFF_R5,r15), r5 ! fn
jsr @r5
mov.l @(OFF_R4,r15), r4 ! arg
bra syscall_exit
nop
.align 2
1: .long schedule_tail
/*
* The poorly named main trapa decode and dispatch routine, for
* system calls and debug traps through their respective jump tables.
*/
ENTRY(system_call)
setup_frame_reg
#if !defined(CONFIG_CPU_SH2)
mov.l 1f, r9
mov.l @r9, r8 ! Read from TRA (Trap Address) Register
#endif
mov #OFF_TRA, r10
add r15, r10
mov.l r8, @r10 ! set TRA value to tra
/*
* Check the trap type
*/
mov #((0x20 << 2) - 1), r9
cmp/hi r9, r8
bt/s debug_trap ! it's a debug trap..
nop
TRACE_IRQS_ON
sti
!
get_current_thread_info r8, r10
mov.l @(TI_FLAGS,r8), r8
mov #(_TIF_WORK_SYSCALL_MASK & 0xff), r10
mov #(_TIF_WORK_SYSCALL_MASK >> 8), r9
tst r10, r8
shll8 r9
bf syscall_trace_entry
tst r9, r8
bf syscall_trace_entry
!
mov.l 2f, r8 ! Number of syscalls
cmp/hs r8, r3
bt syscall_badsys
!
syscall_call:
shll2 r3 ! x4
mov.l 3f, r8 ! Load the address of sys_call_table
add r8, r3
mov.l @r3, r8
mov.l @(OFF_R2,r15), r2
mov.l @(OFF_R1,r15), r1
mov.l @(OFF_R0,r15), r0
mov.l r2, @-r15
mov.l r1, @-r15
mov.l r0, @-r15
jsr @r8 ! jump to specific syscall handler
nop
add #12, r15
mov.l @(OFF_R0,r15), r12 ! save r0
mov.l r0, @(OFF_R0,r15) ! save the return value
!
syscall_exit:
cli
TRACE_IRQS_OFF
!
get_current_thread_info r8, r0
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #(_TIF_ALLWORK_MASK & 0xff), r0
mov #(_TIF_ALLWORK_MASK >> 8), r1
bf syscall_exit_work
shlr8 r0
tst r0, r1
bf syscall_exit_work
bra __restore_all
nop
.align 2
#if !defined(CONFIG_CPU_SH2)
1: .long TRA
#endif
2: .long NR_syscalls
3: .long sys_call_table
7: .long do_syscall_trace_enter
8: .long do_syscall_trace_leave
