/*
* Intel specific MCE features.
* Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
* Copyright (C) 2008, 2009 Intel Corporation
* Author: Andi Kleen
*/
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <asm/apic.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/mce.h>
#include "mce-internal.h"
/*
* Support for Intel Correct Machine Check Interrupts. This allows
* the CPU to raise an interrupt when a corrected machine check happened.
* Normally we pick those up using a regular polling timer.
* Also supports reliable discovery of shared banks.
*/
/*
* CMCI can be delivered to multiple cpus that share a machine check bank
* so we need to designate a single cpu to process errors logged in each bank
* in the interrupt handler (otherwise we would have many races and potential
* double reporting of the same error).
* Note that this can change when a cpu is offlined or brought online since
* some MCA banks are shared across cpus. When a cpu is offlined, cmci_clear()
* disables CMCI on all banks owned by the cpu and clears this bitfield. At
* this point, cmci_rediscover() kicks in and a different cpu may end up
* taking ownership of some of the shared MCA banks that were previously
* owned by the offlined cpu.
*/
static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
/*
* cmci_discover_lock protects against parallel discovery attempts
* which could race against each other.
*/
static DEFINE_RAW_SPINLOCK(cmci_discover_lock);
#define CMCI_THRESHOLD 1
#define CMCI_POLL_INTERVAL (30 * HZ)
#define CMCI_STORM_INTERVAL (1 * HZ)
#define CMCI_STORM_THRESHOLD 15
static DEFINE_PER_CPU(unsigned long, cmci_time_stamp);
static DEFINE_PER_CPU(unsigned int, cmci_storm_cnt);
static DEFINE_PER_CPU(unsigned int, cmci_storm_state);
enum {
CMCI_STORM_NONE,
CMCI_STORM_ACTIVE,
CMCI_STORM_SUBSIDED,
};
static atomic_t cmci_storm_on_cpus;
static int cmci_supported(int *banks)
{
u64 cap;
if (mca_cfg.cmci_disabled || mca_cfg.ignore_ce)
return 0;
/*
* Vendor check is not strictly needed, but the initial
* initialization is vendor keyed and this
* makes sure none of the backdoors are entered otherwise.
*/
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
return 0;
if (!cpu_has_apic || lapic_get_maxlvt() < 6)
return 0;
rdmsrl(MSR_IA32_MCG_CAP, cap);
*banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff);
return !!(cap & MCG_CMCI_P);
}
void mce_intel_cmci_poll(void)
{
if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
return;
machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
}
void mce_intel_hcpu_update(unsigned long cpu)
{
if (per_cpu(cmci_storm_state, cpu) == CMCI_STORM_ACTIVE)
atomic_dec(&cmci_storm_on_cpus);
per_cpu(cmci_storm_state, cpu) = CMCI_STORM_NONE;
}
unsigned long mce_intel_adjust_timer(unsigned long interval)
{
int r;
if (interval < CMCI_POLL_INTERVAL)
return interval;
switch (__this_cpu_read(cmci_storm_state)) {
case CMCI_STORM_ACTIVE:
/*
* We switch back to interrupt mode once the poll timer has
* silenced itself. That means no events recorded and the
* timer interval is back to our poll interval.
*/
__this_cpu_write(cmci_storm_state, CMCI_STORM_SUBSIDED);
r = atomic_sub_return(1, &cmci_storm_on_cpus);
if (r == 0)
pr_notice("CMCI storm subsided: switching to interrupt mode\n");
/* FALLTHROUGH */
case CMCI_STORM_SUBSIDED:
/*
* We wait for all cpus to go back to SUBSIDED
* state. When that happens we switch back to
* interrupt mode.
*/
if (!atomic_read(&cmci_storm_on_cpus)) {
__this_cpu_write(cmci_storm_state, CMCI_STORM_NONE);
cmci_reenable();
cmci_recheck();
}
return CMCI_POLL_INTERVAL;
default:
/*
* We have shiny weather. Let the poll do whatever it
* thinks.
*/
return interval;
}
}
static void cmci_storm_disable_banks(void)
{
unsigned long flags, *owned;
int bank;
u64 val;
raw_spin_lock_irqsave(&cmci_discover_lock, flags);
owned = __get_cpu_var(mce_banks_owned);
for_each_set_bit(bank, owned, MAX_NR_BANKS) {
rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
val &= ~MCI_CTL2_CMCI_EN;
wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
}
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
static bool cmci_storm_detect(void)
{
unsigned int cnt = __this_cpu_read(cmci_storm_cnt);
unsigned long ts = __this_cpu_read(cmci_time_stamp);
unsigned long now = jiffies;
int r;
if (__this_cpu_read(cmci_storm_state) != CMCI_STORM_NONE)
return true;
if (time_before_eq(now, ts + CMCI_STORM_INTERVAL)) {
cnt++;
} else {
cnt = 1;
__this_cpu_write(cmci_time_stamp, now);
}
__this_cpu_write(cmci_storm_cnt, cnt);
if (cnt <= CMCI_STORM_THRESHOLD)
return false;
cmci_storm_disable_banks();
__this_cpu_write(cmci_storm_state, CMCI_STORM_ACTIVE);
r = atomic_add_return(1, &cmci_storm_on_cpus);
mce_timer_kick(CMCI_POLL_INTERVAL);
if (r == 1)
pr_notice("CMCI storm detected: switching to poll mode\n");
return true;
}
/*
* The interrupt handler. This is called on every event.
* Just call the poller directly to log any events.
* This could in theory increase the threshold under high load,
* but doesn't for now.
*/
static void intel_threshold_interrupt(void)
{
if (cmci_storm_detect())
return;
machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
mce_notify_irq();
}
/*
* Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks
* on this CPU. Use the algorithm recommended in the SDM to discover shared
* banks.
*/
static void cmci_discover(int banks)
{
unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
unsigned long flags;
int i;
int bios_wrong_thresh = 0;
raw_spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
u64 val;
int bios_zero_thresh = 0;
if (test_bit(i, owned))
continue;
/* Skip banks in firmware first mode */
if (test_bit(i, mce_banks_ce_disabled))
continue;
rdmsrl(MSR_IA32_MCx_CTL2(i), val);
/* Already owned by someone else? */
if (val & MCI_CTL2_CMCI_EN) {
clear_bit(i, owned);
__clear_bit(i, __get_cpu_var(mce_poll_banks));
continue;
}
if (!mca_cfg.bios_cmci_threshold) {
val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
val |= CMCI_THRESHOLD;
} else if (!(val & MCI_CTL2_CMCI_THRESHOLD_MASK)) {
/*
* If bios_cmci_threshold boot option was specified
* but the threshold is zero, we'll try to initialize
* it to 1.
*/
bios_zero_thresh = 1;
val |= CMCI_THRESHOLD;
}
val |= MCI_CTL2_CMCI_EN;
wrmsrl(MSR_IA32_MCx_CTL2(i), val);
rdmsrl(MSR_IA32_MCx_CTL2(i), val);
/* Did the enable bit stick? -- the bank supports CMCI */
if (val & MCI_CTL2_CMCI_EN) {
set_bit(i, owned);
__clear_bit(i, __get_cpu_var(mce_poll_banks));
/*
* We are able to set thresholds for some banks that
* had a threshold of 0. This means the BIOS has not
* set the thresholds properly or does not work with
* this boot option. Note down now and report later.
*/
if (mca_cfg.bios_cmci_threshold && bios_zero_thresh &&
(val & MCI_CTL2_CMCI_THRESHOLD_MASK))
bios_wrong_thresh = 1;
} else {
WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
}
}
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
if (mca_cfg.bios_cmci_threshold && bios_wrong_thresh) {
pr_info_once(
"bios_cmci_threshold: Some banks do not have valid thresholds set\n");
pr_info_once(
"bios_cmci_threshold: Make sure your BIOS supports this boot option\n");
}
}
/*
* Just in case we missed an event during initialization check
* all the CMCI owned banks.
*/
void cmci_recheck(void)
{
unsigned long flags;
int banks;
if (!mce_available(__this_cpu_ptr(&cpu_info)) || !cmci_supported(&banks))
return;
local_irq_save(flags);
machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
local_irq_restore(flags);
}
/* Caller must hold the lock on cmci_discover_lock */
static void __cmci_disable_bank(int bank)
{
u64 val;
if (!test_bit(bank, __get_cpu_var(mce_banks_owned)))
return;
rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
val &= ~MCI_CTL2_CMCI_EN;
wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
__clear_bit(bank, __get_cpu_var(mce_banks_owned));
}
/*
* Disable CMCI on this CPU for all banks it owns when it goes down.
* This allows other CPUs to claim the banks on rediscovery.
*/
void cmci_clear(void)
{
unsigned long flags;
int i;
int banks;
if (!cmci_supported(&banks))
return;
raw_spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++)
__cmci_disable_bank(i);
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
static void cmci_rediscover_work_func(void *arg)
{
int banks;
/* Recheck banks in case CPUs don't all have the same */
if (cmci_supported(&banks))
cmci_discover(banks);
}
/* After a CPU went down cycle through all the others and rediscover */
void cmci_rediscover(void)
{
int banks;
if (!cmci_supported(&banks))
return;
on_each_cpu(cmci_rediscover_work_func, NULL, 1);
}
/*
* Reenable CMCI on this CPU in case a CPU down failed.
*/
void cmci_reenable(void)
{
int banks;
if (cmci_supported(&banks))
cmci_discover(banks);
}
void cmci_disable_bank(int bank)
{
int banks;
unsigned long flags;
if (!cmci_supported(&banks))
return;
raw_spin_lock_irqsave(&cmci_discover_lock, flags);
__cmci_disable_bank(bank);
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
static void intel_init_cmci(void)
{
int banks;
if (!cmci_supported(&banks))
return;
mce_threshold_vector = intel_threshold_interrupt;
cmci_discover(banks);
/*
* For CPU #0 this runs with still disabled APIC, but that's
* ok because only the vector is set up. We still do another
* check for the banks later for CPU #0 just to make sure
* to not miss any events.
*/
apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED);
cmci_recheck();
}
void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
intel_init_thermal(c);
intel_init_cmci();
}