#include <linux/init.h>
#include <linux/pci.h>
#include <linux/topology.h>
#include "pci.h"
#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
#include <asm/mpspec.h>
#include <linux/cpumask.h>
#endif
/*
* This discovers the pcibus <-> node mapping on AMD K8.
* also get peer root bus resource for io,mmio
*/
#ifdef CONFIG_NUMA
#define BUS_NR 256
#ifdef CONFIG_X86_64
static int mp_bus_to_node[BUS_NR];
void set_mp_bus_to_node(int busnum, int node)
{
if (busnum >= 0 && busnum < BUS_NR)
mp_bus_to_node[busnum] = node;
}
int get_mp_bus_to_node(int busnum)
{
int node = -1;
if (busnum < 0 || busnum > (BUS_NR - 1))
return node;
node = mp_bus_to_node[busnum];
/*
* let numa_node_id to decide it later in dma_alloc_pages
* if there is no ram on that node
*/
if (node != -1 && !node_online(node))
node = -1;
return node;
}
#else /* CONFIG_X86_32 */
static unsigned char mp_bus_to_node[BUS_NR];
void set_mp_bus_to_node(int busnum, int node)
{
if (busnum >= 0 && busnum < BUS_NR)
mp_bus_to_node[busnum] = (unsigned char) node;
}
int get_mp_bus_to_node(int busnum)
{
int node;
if (busnum < 0 || busnum > (BUS_NR - 1))
return 0;
node = mp_bus_to_node[busnum];
return node;
}
#endif /* CONFIG_X86_32 */
#endif /* CONFIG_NUMA */
#ifdef CONFIG_X86_64
/*
* sub bus (transparent) will use entres from 3 to store extra from root,
* so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
*/
#define RES_NUM 16
struct pci_root_info {
char name[12];
unsigned int res_num;
struct resource res[RES_NUM];
int bus_min;
int bus_max;
int node;
int link;
};
/* 4 at this time, it may become to 32 */
#define PCI_ROOT_NR 4
static int pci_root_num;
static struct pci_root_info pci_root_info[PCI_ROOT_NR];
void set_pci_bus_resources_arch_default(struct pci_bus *b)
{
int i;
int j;
struct pci_root_info *info;
/* if only one root bus, don't need to anything */
if (pci_root_num < 2)
return;
for (i = 0; i < pci_root_num; i++) {
if (pci_root_info[i].bus_min == b->number)
break;
}
if (i == pci_root_num)
return;
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
struct resource *root;
res = &info->res[j];
b->resource[j] = res;
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
root = &iomem_resource;
insert_resource(root, res);
}
}
#define RANGE_NUM 16
struct res_range {
size_t start;
size_t end;
};
static void __init update_range(struct res_range *range, size_t start,
size_t end)
{
int i;
int j;
for (j = 0; j < RANGE_NUM; j++) {
if (!range[j].end)
continue;
if (start <= range[j].start && end >= range[j].end) {
range[j].start = 0;
range[j].end = 0;
continue;
}
if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) {
range[j].start = end + 1;
continue;
}
if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) {
range[j].end = start - 1;
continue;
}
if (start > range[j].start && end < range[j].end) {
/* find the new spare */
for (i = 0; i < RANGE_NUM; i++) {
if (range[i].end == 0)
break;
}
if (i < RANGE_NUM) {
range[i].end = range[j].end;
range[i].start = end + 1;
} else {
printk(KERN_ERR "run of slot in ranges\n");
}
range[j].end = start - 1;
continue;
}
}
}
static void __init update_res(struct pci_root_info *info, size_t start,
size_t end, unsigned long flags, int merge)
{
int i;
struct resource *res;
if (!merge)
goto addit;
/* try to merge it with old one */
for (i = 0; i < info->res_num; i++) {
size_t final_start, final_end;
size_t common_start, common_end;
res = &info->res[i];
if (res->flags != flags)
continue;
common_start = max((size_t)res->start, start);
common_end = min((size_t)res->end, end);
if (common_start > common_end + 1)
continue;
final_start = min((size_t)res->start, start);
final_end = max((size_t)res->end, end);
res->start = final_start;
res->end = final_end;
return;
}
addit:
/* need to add that */
if (info->res_num >= RES_NUM)
return;
res = &info->res[info->res_num];
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
res->child = NULL;
info->res_num++;
}
struct pci_hostbridge_probe {
u32 bus;
u32 slot;
u32 vendor;
u32 device;
};
static struct pci_hostbridge_probe pci_probes[] __initdata = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
};
static u64 __initdata fam10h_mmconf_start;
static u64 __initdata fam10h_mmconf_end;
static void __init get_pci_mmcfg_amd_fam10h_range(void)
{
u32 address;
u64 base, msr;
unsigned segn_busn_bits;
/* assume all cpus from fam10h have mmconf */
if (boot_cpu_data.x86 < 0x10)
return;
address = MSR_FAM10H_MMIO_CONF_BASE;
rdmsrl(address, msr);
/* mmconfig is not enable */
if (!(msr & FAM10H_MMIO_CONF_ENABLE))
return;
base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
FAM10H_MMIO_CONF_BUSRANGE_MASK;
fam10h_mmconf_start = base;
fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
}
/**
* early_fill_mp_bus_to_node()
* called before pcibios_scan_root and pci_scan_bus
* fills the mp_bus_to_cpumask array based according to the LDT Bus Number
* Registers found in the K8 northbridge
*/
static int __init early_fill_mp_bus_info(void)
{
int i;
int j;
unsigned bus;
unsigned slot;
int found;
int node;
int link;
int def_node;
int def_link;
struct pci_root_info *info;
u32 reg;
struct resource *res;
size_t start;
size_t end;
struct res_range range[RANGE_NUM];
u64 val;
u32 address;
#ifdef CONFIG_NUMA
for (i = 0; i < BUS_NR; i++)
mp_bus_to_node[i] = -1;
#endif
if (!early_pci_allowed())
return -1;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
u16 vendor;
bus = pci_probes[i].bus;
slot = pci_probes[i].slot;
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
found = 1;
break;
}
}
if (!found)
return 0;
pci_root_num = 0;
for (i = 0; i < 4; i++) {
int min_bus;
int max_bus;
reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
/* Check if that register is enabled for bus range */
if ((reg & 7) != 3)
continue;
min_bus = (reg >> 16) & 0xff;
max_bus = (reg >> 24) & 0xff;
node = (reg >> 4) & 0x07;
#ifdef CONFIG_NUMA
for (j = min_bus; j <= max_bus; j++)
mp_bus_to_node[j] = (unsigned char) node;
#endif
link = (reg >> 8) & 0x03;
info = &pci_root_info[pci_root_num];
info->bus_min = min_bus;
info->bus_max = max_bus;
info->node = node;
info->link = link;
sprintf(info->name, "PCI Bus #%02x", min_bus);
pci_root_num++;
}
/* get the default node and link for left over res */
reg = read_pci_config(bus, slot, 0, 0x60);
def_node = (reg >> 8) & 0x07;
reg = read_pci_config(bus, slot, 0, 0x64);
def_link = (reg >> 8) & 0x03;
memset(range, 0, sizeof(range));
range[0].end = 0xffff;
/* io port resource */
for (i = 0; i < 4; i++) {
reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
if (!(reg & 3))
continue;
start = reg & 0xfff000;
reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3));
node = reg & 0x07;
link = (reg >> 4) & 0x03;
end = (reg & 0xfff000) | 0xfff;
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == node && info->link == link)
break;
}
if (j == pci_root_num)
continue; /* not found */
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
node, link, (u64)start, (u64)end);
/* kernel only handle 16 bit only */
if (end > 0xffff)
end = 0xffff;
update_res(info, start, end, IORESOURCE_IO, 1);
update_range(range, start, end);
}
/* add left over io port range to def node/link, [0, 0xffff] */
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == def_node && info->link == def_link)
break;
}
if (j < pci_root_num) {
info = &pci_root_info[j];
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
update_res(info, range[i].start, range[i].end,
IORESOURCE_IO, 1);
}
}
memset(range, 0, sizeof(range));
/* 0xfd00000000-0xffffffffff for HT */
range[0].end = (0xfdULL<<32) - 1;
/* need to take out [0, TOM) for RAM*/
address = MSR_K8_TOP_MEM1;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
if (end < (1ULL<<32))
update_range(range, 0, end - 1);
/* get mmconfig */
get_pci_mmcfg_amd_fam10h_range();
/* need to take out mmconf range */
if (fam10h_mmconf_end) {
printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
update_range(range, fam10h_mmconf_start, fam10h_mmconf_end);
}
/* mmio resource */
for (i = 0; i < 8; i++) {
reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
if (!(reg & 3))
continue;
start = reg & 0xffffff00; /* 39:16 on 31:8*/
start <<= 8;
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
node = reg & 0x07;
link = (reg >> 4) & 0x03;
end = (reg & 0xffffff00);
end <<= 8;
end |= 0xffff;
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == node && info->link == link)
break;
}
if (j == pci_root_num)
continue; /* not found */
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
node, link, (u64)start, (u64)end);
/*
* some sick allocation would have range overlap with fam10h
* mmconf range, so need to update start and end.
*/
if (fam10h_mmconf_end) {
int changed = 0;
u64 endx = 0;
if (start >= fam10h_mmconf_start &&
start <= fam10h_mmconf_end) {
start = fam10h_mmconf_end + 1;
changed = 1;
}
if (end >= fam10h_mmconf_start &&
end <= fam10h_mmconf_end) {
end = fam10h_mmconf_start - 1;
changed = 1;
}
if (start < fam10h_mmconf_start &&
end > fam10h_mmconf_end) {
/* we got a hole */
endx = fam10h_mmconf_start - 1;
update_res(info, start, endx, IORESOURCE_MEM, 0);
update_range(range, start, endx);
printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
start = fam10h_mmconf_end + 1;
changed = 1;
}
if (changed) {
if (start <= end) {
printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
} else {
printk(KERN_CONT "%s\n", endx?"":" ==> none");
continue;
}
}
}
update_res(info, start, end, IORESOURCE_MEM, 1);
update_range(range, start, end);
printk(KERN_CONT "\n");
}
/* need to take out [4G, TOM2) for RAM*/
/* SYS_CFG */
address = MSR_K8_SYSCFG;
rdmsrl(address, val);
/* TOP_MEM2 is enabled? */
if (val & (1<<21)) {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
update_range(range, 1ULL<<32, end - 1);
}
/*
* add left over mmio range to def node/link ?
* that is tricky, just record range in from start_min to 4G
*/
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == def_node && info->link == def_link)
break;
}
if (j < pci_root_num) {
info = &pci_root_info[j];
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
update_res(info, range[i].start, range[i].end,
IORESOURCE_MEM, 1);
}
}
for (i = 0; i < pci_root_num; i++) {
int res_num;
int busnum;
info = &pci_root_info[i];
res_num = info->res_num;
busnum = info->bus_min;
printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
info->bus_min, info->bus_max, info->node, info->link);
for (j = 0; j < res_num; j++) {
res = &info->res[j];
printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
busnum, j,
(res->flags & IORESOURCE_IO)?"io port":"mmio",
res->start, res->end);
}
}
return 0;
}
postcore_initcall(early_fill_mp_bus_info);
#endif
/* common 32/64 bit code */
#define ENABLE_CF8_EXT_CFG (1ULL << 46)
static void enable_pci_io_ecs_per_cpu(void *unused)
{
u64 reg;
rdmsrl(MSR_AMD64_NB_CFG, reg);
if (!(reg & ENABLE_CF8_EXT_CFG)) {
reg |= ENABLE_CF8_EXT_CFG;
wrmsrl(MSR_AMD64_NB_CFG, reg);
}
}
static int __init enable_pci_io_ecs(void)
{
/* assume all cpus from fam10h have IO ECS */
if (boot_cpu_data.x86 < 0x10)
return 0;
on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
pci_probe |= PCI_HAS_IO_ECS;
return 0;
}
postcore_initcall(enable_pci_io_ecs);
