/******************************************************************************
*
* Module Name: evgpe - General Purpose Event handling and dispatch
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acevents.h>
#include <acpi/acnamesp.h>
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpe")
/* Local prototypes */
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
/*******************************************************************************
*
* FUNCTION: acpi_ev_set_gpe_type
*
* PARAMETERS: gpe_event_info - GPE to set
* Type - New type
*
* RETURN: Status
*
* DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
*
******************************************************************************/
acpi_status
acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_set_gpe_type);
/* Validate type and update register enable masks */
switch (type) {
case ACPI_GPE_TYPE_WAKE:
case ACPI_GPE_TYPE_RUNTIME:
case ACPI_GPE_TYPE_WAKE_RUN:
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Disable the GPE if currently enabled */
status = acpi_ev_disable_gpe(gpe_event_info);
/* Type was validated above */
gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; /* Clear type bits */
gpe_event_info->flags |= type; /* Insert type */
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_update_gpe_enable_masks
*
* PARAMETERS: gpe_event_info - GPE to update
* Type - What to do: ACPI_GPE_DISABLE or
* ACPI_GPE_ENABLE
*
* RETURN: Status
*
* DESCRIPTION: Updates GPE register enable masks based on the GPE type
*
******************************************************************************/
acpi_status
acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
u8 type)
{
struct acpi_gpe_register_info *gpe_register_info;
u8 register_bit;
ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
register_bit = gpe_event_info->register_bit;
/* 1) Disable case. Simply clear all enable bits */
if (type == ACPI_GPE_DISABLE) {
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
register_bit);
ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
return_ACPI_STATUS(AE_OK);
}
/* 2) Enable case. Set/Clear the appropriate enable bits */
switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
case ACPI_GPE_TYPE_WAKE:
ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
break;
case ACPI_GPE_TYPE_RUNTIME:
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
register_bit);
ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
break;
case ACPI_GPE_TYPE_WAKE_RUN:
ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_enable_gpe
*
* PARAMETERS: gpe_event_info - GPE to enable
* write_to_hardware - Enable now, or just mark data structs
* (WAKE GPEs should be deferred)
*
* RETURN: Status
*
* DESCRIPTION: Enable a GPE based on the GPE type
*
******************************************************************************/
acpi_status
acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
u8 write_to_hardware)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_enable_gpe);
/* Make sure HW enable masks are updated */
status =
acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Mark wake-enabled or HW enable, or both */
switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
case ACPI_GPE_TYPE_WAKE:
ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
break;
case ACPI_GPE_TYPE_WAKE_RUN:
ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
/*lint -fallthrough */
case ACPI_GPE_TYPE_RUNTIME:
ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
if (write_to_hardware) {
/* Clear the GPE (of stale events), then enable it */
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Enable the requested runtime GPE */
status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
}
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_disable_gpe
*
* PARAMETERS: gpe_event_info - GPE to disable
*
* RETURN: Status
*
* DESCRIPTION: Disable a GPE based on the GPE type
*
******************************************************************************/
acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_disable_gpe);
if (!(gpe_event_info->flags & ACPI_GPE_ENABLE_MASK)) {
return_ACPI_STATUS(AE_OK);
}
/* Make sure HW enable masks are updated */
status =
acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Mark wake-disabled or HW disable, or both */
switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
case ACPI_GPE_TYPE_WAKE:
ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
break;
case ACPI_GPE_TYPE_WAKE_RUN:
ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
/*lint -fallthrough */
case ACPI_GPE_TYPE_RUNTIME:
/* Disable the requested runtime GPE */
ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_get_gpe_event_info
*
* PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
* gpe_number - Raw GPE number
*
* RETURN: A GPE event_info struct. NULL if not a valid GPE
*
* DESCRIPTION: Returns the event_info struct associated with this GPE.
* Validates the gpe_block and the gpe_number
*
* Should be called only when the GPE lists are semaphore locked
* and not subject to change.
*
******************************************************************************/
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number)
{
union acpi_operand_object *obj_desc;
struct acpi_gpe_block_info *gpe_block;
acpi_native_uint i;
ACPI_FUNCTION_ENTRY();
/* A NULL gpe_block means use the FADT-defined GPE block(s) */
if (!gpe_device) {
/* Examine GPE Block 0 and 1 (These blocks are permanent) */
for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
gpe_block = acpi_gbl_gpe_fadt_blocks[i];
if (gpe_block) {
if ((gpe_number >= gpe_block->block_base_number)
&& (gpe_number <
gpe_block->block_base_number +
(gpe_block->register_count * 8))) {
return (&gpe_block->
event_info[gpe_number -
gpe_block->
block_base_number]);
}
}
}
/* The gpe_number was not in the range of either FADT GPE block */
return (NULL);
}
/* A Non-NULL gpe_device means this is a GPE Block Device */
obj_desc =
acpi_ns_get_attached_object((struct acpi_namespace_node *)
gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
}
gpe_block = obj_desc->device.gpe_block;
if ((gpe_number >= gpe_block->block_base_number) &&
(gpe_number <
gpe_block->block_base_number + (gpe_block->register_count * 8))) {
return (&gpe_block->
event_info[gpe_number - gpe_block->block_base_number]);
}
return (NULL);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_detect
*
* PARAMETERS: gpe_xrupt_list - Interrupt block for this interrupt.
* Can have multiple GPE blocks attached.
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
* DESCRIPTION: Detect if any GP events have occurred. This function is
* executed at interrupt level.
*
******************************************************************************/
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
{
acpi_status status;
struct acpi_gpe_block_info *gpe_block;
struct acpi_gpe_register_info *gpe_register_info;
u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
u8 enabled_status_byte;
u32 status_reg;
u32 enable_reg;
acpi_cpu_flags flags;
acpi_native_uint i;
acpi_native_uint j;
ACPI_FUNCTION_NAME(ev_gpe_detect);
/* Check for the case where there are no GPEs */
if (!gpe_xrupt_list) {
return (int_status);
}
/* Examine all GPE blocks attached to this interrupt level */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
gpe_block = gpe_xrupt_list->gpe_block_list_head;
while (gpe_block) {
/*
* Read all of the 8-bit GPE status and enable registers
* in this GPE block, saving all of them.
* Find all currently active GP events.
*/
for (i = 0; i < gpe_block->register_count; i++) {
/* Get the next status/enable pair */
gpe_register_info = &gpe_block->register_info[i];
/* Read the Status Register */
status =
acpi_hw_low_level_read(ACPI_GPE_REGISTER_WIDTH,
&status_reg,
&gpe_register_info->
status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Read the Enable Register */
status =
acpi_hw_low_level_read(ACPI_GPE_REGISTER_WIDTH,
&enable_reg,
&gpe_register_info->
enable_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
"Read GPE Register at GPE%X: Status=%02X, Enable=%02X\n",
gpe_register_info->base_gpe_number,
status_reg, enable_reg));
/* Check if there is anything active at all in this register */
enabled_status_byte = (u8) (status_reg & enable_reg);
if (!enabled_status_byte) {
/* No active GPEs in this register, move on */
continue;
}
/* Now look at the individual GPEs in this byte register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
/* Examine one GPE bit */
if (enabled_status_byte &
acpi_gbl_decode_to8bit[j]) {
/*
* Found an active GPE. Dispatch the event to a handler
* or method.
*/
int_status |=
acpi_ev_gpe_dispatch(&gpe_block->
event_info[(i *
ACPI_GPE_REGISTER_WIDTH)
+
j],
(u32) j +
gpe_register_info->
base_gpe_number);
}
}
}
gpe_block = gpe_block->next;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return (int_status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_asynch_execute_gpe_method
*
* PARAMETERS: Context (gpe_event_info) - Info for this GPE
*
* RETURN: None
*
* DESCRIPTION: Perform the actual execution of a GPE control method. This
* function is called from an invocation of acpi_os_queue_for_execution
* (and therefore does NOT execute at interrupt level) so that
* the control method itself is not executed in the context of
* an interrupt handler.
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = (void *)context;
u32 gpe_number = 0;
acpi_status status;
struct acpi_gpe_event_info local_gpe_event_info;
struct acpi_parameter_info info;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_VOID;
}
/* Must revalidate the gpe_number/gpe_block */
if (!acpi_ev_valid_gpe_event(gpe_event_info)) {
status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_VOID;
}
/* Set the GPE flags for return to enabled state */
(void)acpi_ev_enable_gpe(gpe_event_info, FALSE);
/*
* Take a snapshot of the GPE info for this level - we copy the
* info to prevent a race condition with remove_handler/remove_block.
*/
ACPI_MEMCPY(&local_gpe_event_info, gpe_event_info,
sizeof(struct acpi_gpe_event_info));
status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_VOID;
}
/*
* Must check for control method type dispatch one more
* time to avoid race with ev_gpe_install_handler
*/
if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_METHOD) {
/*
* Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
* control method that corresponds to this GPE
*/
info.node = local_gpe_event_info.dispatch.method_node;
info.parameters =
ACPI_CAST_PTR(union acpi_operand_object *, gpe_event_info);
info.parameter_type = ACPI_PARAM_GPE;
status = acpi_ns_evaluate_by_handle(&info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"While evaluating method [%4.4s] for GPE[%2X]",
acpi_ut_get_node_name
(local_gpe_event_info.dispatch.
method_node), gpe_number));
}
}
if ((local_gpe_event_info.flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_LEVEL_TRIGGERED) {
/*
* GPE is level-triggered, we clear the GPE status bit after
* handling the event.
*/
status = acpi_hw_clear_gpe(&local_gpe_event_info);
if (ACPI_FAILURE(status)) {
return_VOID;
}
}
/* Enable this GPE */
(void)acpi_hw_write_gpe_enable_reg(&local_gpe_event_info);
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_dispatch
*
* PARAMETERS: gpe_event_info - Info for this GPE
* gpe_number - Number relative to the parent GPE block
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
* DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
* or method (e.g. _Lxx/_Exx) handler.
*
* This function executes at interrupt level.
*
******************************************************************************/
u32
acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
/*
* If edge-triggered, clear the GPE status bit now. Note that
* level-triggered events are cleared after the GPE is serviced.
*/
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_EDGE_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to clear GPE[%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
/* Save current system state */
if (acpi_gbl_system_awake_and_running) {
ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
} else {
ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
}
/*
* Dispatch the GPE to either an installed handler, or the control
* method associated with this GPE (_Lxx or _Exx).
* If a handler exists, we invoke it and do not attempt to run the method.
* If there is neither a handler nor a method, we disable the level to
* prevent further events from coming in here.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
/*
* Invoke the installed handler (at interrupt level)
* Ignore return status for now. TBD: leave GPE disabled on error?
*/
(void)gpe_event_info->dispatch.handler->address(gpe_event_info->
dispatch.
handler->
context);
/* It is now safe to clear level-triggered events. */
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_LEVEL_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to clear GPE[%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
break;
case ACPI_GPE_DISPATCH_METHOD:
/*
* Disable GPE, so it doesn't keep firing before the method has a
* chance to run.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE[%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
/*
* Execute the method associated with the GPE
* NOTE: Level-triggered GPEs are cleared after the method completes.
*/
status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
acpi_ev_asynch_execute_gpe_method,
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to queue handler for GPE[%2X] - event disabled",
gpe_number));
}
break;
default:
/* No handler or method to run! */
ACPI_ERROR((AE_INFO,
"No handler or method for GPE[%2X], disabling event",
gpe_number));
/*
* Disable the GPE. The GPE will remain disabled until the ACPI
* Core Subsystem is restarted, or a handler is installed.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to disable GPE[%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
break;
}
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
#ifdef ACPI_GPE_NOTIFY_CHECK
/*******************************************************************************
* TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
*
* FUNCTION: acpi_ev_check_for_wake_only_gpe
*
* PARAMETERS: gpe_event_info - info for this GPE
*
* RETURN: Status
*
* DESCRIPTION: Determine if a a GPE is "wake-only".
*
* Called from Notify() code in interpreter when a "DeviceWake"
* Notify comes in.
*
******************************************************************************/
acpi_status
acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ev_check_for_wake_only_gpe);
if ((gpe_event_info) && /* Only >0 for _Lxx/_Exx */
((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) { /* System state at GPE time */
/* This must be a wake-only GPE, disable it */
status = acpi_ev_disable_gpe(gpe_event_info);
/* Set GPE to wake-only. Do not change wake disabled/enabled status */
acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
ACPI_INFO((AE_INFO,
"GPE %p was updated from wake/run to wake-only",
gpe_event_info));
/* This was a wake-only GPE */
return_ACPI_STATUS(AE_WAKE_ONLY_GPE);
}
return_ACPI_STATUS(AE_OK);
}
#endif
