/*
* Intel D82875P Memory Controller kernel module
* (C) 2003 Linux Networx (http://lnxi.com)
* This file may be distributed under the terms of the
* GNU General Public License.
*
* Written by Thayne Harbaugh
* Contributors:
* Wang Zhenyu at intel.com
*
* $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
*
* Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include "edac_mc.h"
#define i82875p_printk(level, fmt, arg...) \
edac_printk(level, "i82875p", fmt, ##arg)
#define i82875p_mc_printk(mci, level, fmt, arg...) \
edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
#ifndef PCI_DEVICE_ID_INTEL_82875_0
#define PCI_DEVICE_ID_INTEL_82875_0 0x2578
#endif /* PCI_DEVICE_ID_INTEL_82875_0 */
#ifndef PCI_DEVICE_ID_INTEL_82875_6
#define PCI_DEVICE_ID_INTEL_82875_6 0x257e
#endif /* PCI_DEVICE_ID_INTEL_82875_6 */
/* four csrows in dual channel, eight in single channel */
#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans))
/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
#define I82875P_EAP 0x58 /* Error Address Pointer (32b)
*
* 31:12 block address
* 11:0 reserved
*/
#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
*
* 7:0 DRAM ECC Syndrome
*/
#define I82875P_DES 0x5d /* DRAM Error Status (8b)
*
* 7:1 reserved
* 0 Error channel 0/1
*/
#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b)
*
* 15:10 reserved
* 9 non-DRAM lock error (ndlock)
* 8 Sftwr Generated SMI
* 7 ECC UE
* 6 reserved
* 5 MCH detects unimplemented cycle
* 4 AGP access outside GA
* 3 Invalid AGP access
* 2 Invalid GA translation table
* 1 Unsupported AGP command
* 0 ECC CE
*/
#define I82875P_ERRCMD 0xca /* Error Command (16b)
*
* 15:10 reserved
* 9 SERR on non-DRAM lock
* 8 SERR on ECC UE
* 7 SERR on ECC CE
* 6 target abort on high exception
* 5 detect unimplemented cyc
* 4 AGP access outside of GA
* 3 SERR on invalid AGP access
* 2 invalid translation table
* 1 SERR on unsupported AGP command
* 0 reserved
*/
/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b)
*
* 15:10 reserved
* 9 fast back-to-back - ro 0
* 8 SERR enable - ro 0
* 7 addr/data stepping - ro 0
* 6 parity err enable - ro 0
* 5 VGA palette snoop - ro 0
* 4 mem wr & invalidate - ro 0
* 3 special cycle - ro 0
* 2 bus master - ro 0
* 1 mem access dev6 - 0(dis),1(en)
* 0 IO access dev3 - 0(dis),1(en)
*/
#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b)
*
* 31:12 mem base addr [31:12]
* 11:4 address mask - ro 0
* 3 prefetchable - ro 0(non),1(pre)
* 2:1 mem type - ro 0
* 0 mem space - ro 0
*/
/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */
#define I82875P_DRB_SHIFT 26 /* 64MiB grain */
#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8)
*
* 7 reserved
* 6:0 64MiB row boundary addr
*/
#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8)
*
* 7 reserved
* 6:4 row attr row 1
* 3 reserved
* 2:0 row attr row 0
*
* 000 = 4KiB
* 001 = 8KiB
* 010 = 16KiB
* 011 = 32KiB
*/
#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b)
*
* 31:30 reserved
* 29 init complete
* 28:23 reserved
* 22:21 nr chan 00=1,01=2
* 20 reserved
* 19:18 Data Integ Mode 00=none,01=ecc
* 17:11 reserved
* 10:8 refresh mode
* 7 reserved
* 6:4 mode select
* 3:2 reserved
* 1:0 DRAM type 01=DDR
*/
enum i82875p_chips {
I82875P = 0,
};
struct i82875p_pvt {
struct pci_dev *ovrfl_pdev;
void __iomem *ovrfl_window;
};
struct i82875p_dev_info {
const char *ctl_name;
};
struct i82875p_error_info {
u16 errsts;
u32 eap;
u8 des;
u8 derrsyn;
u16 errsts2;
};
static const struct i82875p_dev_info i82875p_devs[] = {
[I82875P] = {
.ctl_name = "i82875p"},
};
static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code
has already registered driver */
static int i82875p_registered = 1;
static void i82875p_get_error_info (struct mem_ctl_info *mci,
struct i82875p_error_info *info)
{
/*
* This is a mess because there is no atomic way to read all the
* registers at once and the registers can transition from CE being
* overwritten by UE.
*/
pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts);
pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn);
pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2);
pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
/*
* If the error is the same then we can for both reads then
* the first set of reads is valid. If there is a change then
* there is a CE no info and the second set of reads is valid
* and should be UE info.
*/
if (!(info->errsts2 & 0x0081))
return;
if ((info->errsts ^ info->errsts2) & 0x0081) {
pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
pci_read_config_byte(mci->pdev, I82875P_DERRSYN,
&info->derrsyn);
}
}
static int i82875p_process_error_info (struct mem_ctl_info *mci,
struct i82875p_error_info *info, int handle_errors)
{
int row, multi_chan;
multi_chan = mci->csrows[0].nr_channels - 1;
if (!(info->errsts2 & 0x0081))
return 0;
if (!handle_errors)
return 1;
if ((info->errsts ^ info->errsts2) & 0x0081) {
edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
info->errsts = info->errsts2;
}
info->eap >>= PAGE_SHIFT;
row = edac_mc_find_csrow_by_page(mci, info->eap);
if (info->errsts & 0x0080)
edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE");
else
edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
multi_chan ? (info->des & 0x1) : 0,
"i82875p CE");
return 1;
}
static void i82875p_check(struct mem_ctl_info *mci)
{
struct i82875p_error_info info;
debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
i82875p_get_error_info(mci, &info);
i82875p_process_error_info(mci, &info, 1);
}
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *);
#endif
static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
{
int rc = -ENODEV;
int index;
struct mem_ctl_info *mci = NULL;
struct i82875p_pvt *pvt = NULL;
unsigned long last_cumul_size;
struct pci_dev *ovrfl_pdev;
void __iomem *ovrfl_window = NULL;
u32 drc;
u32 drc_chan; /* Number of channels 0=1chan,1=2chan */
u32 nr_chans;
u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
debugf0("%s()\n", __func__);
ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
if (!ovrfl_pdev) {
/*
* Intel tells BIOS developers to hide device 6 which
* configures the overflow device access containing
* the DRBs - this is where we expose device 6.
* http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
*/
pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
ovrfl_pdev =
pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
if (!ovrfl_pdev)
goto fail;
}
#ifdef CONFIG_PROC_FS
if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
i82875p_printk(KERN_ERR,
"%s(): Failed to attach overflow device\n",
__func__);
goto fail;
}
#endif /* CONFIG_PROC_FS */
if (pci_enable_device(ovrfl_pdev)) {
i82875p_printk(KERN_ERR,
"%s(): Failed to enable overflow device\n",
__func__);
goto fail;
}
if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
#ifdef CORRECT_BIOS
goto fail;
#endif
}
/* cache is irrelevant for PCI bus reads/writes */
ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0),
pci_resource_len(ovrfl_pdev, 0));
if (!ovrfl_window) {
i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
__func__);
goto fail;
}
/* need to find out the number of channels */
drc = readl(ovrfl_window + I82875P_DRC);
drc_chan = ((drc >> 21) & 0x1);
nr_chans = drc_chan + 1;
drc_ddim = (drc >> 18) & 0x1;
mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
nr_chans);
if (!mci) {
rc = -ENOMEM;
goto fail;
}
debugf3("%s(): init mci\n", __func__);
mci->pdev = pdev;
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_UNKNOWN;
/* adjust FLAGS */
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
mci->edac_check = i82875p_check;
mci->ctl_page_to_phys = NULL;
debugf3("%s(): init pvt\n", __func__);
pvt = (struct i82875p_pvt *) mci->pvt_info;
pvt->ovrfl_pdev = ovrfl_pdev;
pvt->ovrfl_window = ovrfl_window;
/*
* The dram row boundary (DRB) reg values are boundary address
* for each DRAM row with a granularity of 32 or 64MB (single/dual
* channel operation). DRB regs are cumulative; therefore DRB7 will
* contain the total memory contained in all eight rows.
*/
for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
u8 value;
u32 cumul_size;
struct csrow_info *csrow = &mci->csrows[index];
value = readb(ovrfl_window + I82875P_DRB + index);
cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
cumul_size);
if (cumul_size == last_cumul_size)
continue; /* not populated */
csrow->first_page = last_cumul_size;
csrow->last_page = cumul_size - 1;
csrow->nr_pages = cumul_size - last_cumul_size;
last_cumul_size = cumul_size;
csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
csrow->mtype = MEM_DDR;
csrow->dtype = DEV_UNKNOWN;
csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
}
/* clear counters */
pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
if (edac_mc_add_mc(mci)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
/* get this far and it's successful */
debugf3("%s(): success\n", __func__);
return 0;
fail:
if (mci)
edac_mc_free(mci);
if (ovrfl_window)
iounmap(ovrfl_window);
if (ovrfl_pdev) {
pci_release_regions(ovrfl_pdev);
pci_disable_device(ovrfl_pdev);
}
/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
return rc;
}
/* returns count (>= 0), or negative on error */
static int __devinit i82875p_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int rc;
debugf0("%s()\n", __func__);
i82875p_printk(KERN_INFO, "i82875p init one\n");
if(pci_enable_device(pdev) < 0)
return -EIO;
rc = i82875p_probe1(pdev, ent->driver_data);
if (mci_pdev == NULL)
mci_pdev = pci_dev_get(pdev);
return rc;
}
static void __devexit i82875p_remove_one(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
struct i82875p_pvt *pvt = NULL;
debugf0("%s()\n", __func__);
if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL)
return;
pvt = (struct i82875p_pvt *) mci->pvt_info;
if (pvt->ovrfl_window)
iounmap(pvt->ovrfl_window);
if (pvt->ovrfl_pdev) {
#ifdef CORRECT_BIOS
pci_release_regions(pvt->ovrfl_pdev);
#endif /*CORRECT_BIOS */
pci_disable_device(pvt->ovrfl_pdev);
pci_dev_put(pvt->ovrfl_pdev);
}
if (edac_mc_del_mc(mci))
return;
edac_mc_free(mci);
}
static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = {
{PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
I82875P},
{0,} /* 0 terminated list. */
};
MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
static struct pci_driver i82875p_driver = {
.name = EDAC_MOD_STR,
.probe = i82875p_init_one,
.remove = __devexit_p(i82875p_remove_one),
.id_table = i82875p_pci_tbl,
};
static int __init i82875p_init(void)
{
int pci_rc;
debugf3("%s()\n", __func__);
pci_rc = pci_register_driver(&i82875p_driver);
if (pci_rc < 0)
return pci_rc;
if (mci_pdev == NULL) {
i82875p_registered = 0;
mci_pdev =
pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82875_0, NULL);
if (!mci_pdev) {
debugf0("875p pci_get_device fail\n");
return -ENODEV;
}
pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
if (pci_rc < 0) {
debugf0("875p init fail\n");
pci_dev_put(mci_pdev);
return -ENODEV;
}
}
return 0;
}
static void __exit i82875p_exit(void)
{
debugf3("%s()\n", __func__);
pci_unregister_driver(&i82875p_driver);
if (!i82875p_registered) {
i82875p_remove_one(mci_pdev);
pci_dev_put(mci_pdev);
}
}
module_init(i82875p_init);
module_exit(i82875p_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");
