/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <lantiq_soc.h>
/*
* By attaching hardware latches to the EBU it is possible to create output
* only gpios. This driver configures a special memory address, which when
* written to outputs 16 bit to the latches.
*/
#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */
#define LTQ_EBU_WP 0x80000000 /* write protect bit */
struct ltq_mm {
struct of_mm_gpio_chip mmchip;
u16 shadow; /* shadow the latches state */
};
/**
* ltq_mm_apply() - write the shadow value to the ebu address.
* @chip: Pointer to our private data structure.
*
* Write the shadow value to the EBU to set the gpios. We need to set the
* global EBU lock to make sure that PCI/MTD dont break.
*/
static void ltq_mm_apply(struct ltq_mm *chip)
{
unsigned long flags;
spin_lock_irqsave(&ebu_lock, flags);
ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
__raw_writew(chip->shadow, chip->mmchip.regs);
ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
spin_unlock_irqrestore(&ebu_lock, flags);
}
/**
* ltq_mm_set() - gpio_chip->set - set gpios.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* Set the shadow value and call ltq_mm_apply.
*/
static void ltq_mm_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct ltq_mm *chip =
container_of(mm_gc, struct ltq_mm, mmchip);
if (value)
chip->shadow |= (1 << offset);
else
chip->shadow &= ~(1 << offset);
ltq_mm_apply(chip);
}
/**
* ltq_mm_dir_out() - gpio_chip->dir_out - set gpio direction.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* Same as ltq_mm_set, always returns 0.
*/
static int ltq_mm_dir_out(struct gpio_chip *gc, unsigned offset, int value)
{
ltq_mm_set(gc, offset, value);
return 0;
}
/**
* ltq_mm_save_regs() - Set initial values of GPIO pins
* @mm_gc: pointer to memory mapped GPIO chip structure
*/
static void ltq_mm_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct ltq_mm *chip =
container_of(mm_gc, struct ltq_mm, mmchip);
/* tell the ebu controller which memory address we will be using */
ltq_ebu_w32(CPHYSADDR(chip->mmchip.regs) | 0x1, LTQ_EBU_ADDRSEL1);
ltq_mm_apply(chip);
}
static int ltq_mm_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct ltq_mm *chip;
const __be32 *shadow;
int ret = 0;
if (!res) {
dev_err(&pdev->dev, "failed to get memory resource\n");
return -ENOENT;
}
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->mmchip.gc.ngpio = 16;
chip->mmchip.gc.label = "gpio-mm-ltq";
chip->mmchip.gc.direction_output = ltq_mm_dir_out;
chip->mmchip.gc.set = ltq_mm_set;
chip->mmchip.save_regs = ltq_mm_save_regs;
/* store the shadow value if one was passed by the devicetree */
shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
if (shadow)
chip->shadow = be32_to_cpu(*shadow);
ret = of_mm_gpiochip_add(pdev->dev.of_node, &chip->mmchip);
if (ret)
kfree(chip);
return ret;
}
static const struct of_device_id ltq_mm_match[] = {
{ .compatible = "lantiq,gpio-mm" },
{},
};
MODULE_DEVICE_TABLE(of, ltq_mm_match);
static struct platform_driver ltq_mm_driver = {
.probe = ltq_mm_probe,
.driver = {
.name = "gpio-mm-ltq",
.owner = THIS_MODULE,
.of_match_table = ltq_mm_match,
},
};
static int __init ltq_mm_init(void)
{
return platform_driver_register(<q_mm_driver);
}
subsys_initcall(ltq_mm_init);
