/* exynos_drm_drv.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* Authors:
* Inki Dae <inki.dae@samsung.com>
* Joonyoung Shim <jy0922.shim@samsung.com>
* Seung-Woo Kim <sw0312.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _EXYNOS_DRM_DRV_H_
#define _EXYNOS_DRM_DRV_H_
#include <drm/drmP.h>
#include <linux/module.h>
#define MAX_CRTC 3
#define MAX_PLANE 5
#define MAX_FB_BUFFER 4
#define to_exynos_crtc(x) container_of(x, struct exynos_drm_crtc, base)
#define to_exynos_plane(x) container_of(x, struct exynos_drm_plane, base)
/* this enumerates display type. */
enum exynos_drm_output_type {
EXYNOS_DISPLAY_TYPE_NONE,
/* RGB or CPU Interface. */
EXYNOS_DISPLAY_TYPE_LCD,
/* HDMI Interface. */
EXYNOS_DISPLAY_TYPE_HDMI,
/* Virtual Display Interface. */
EXYNOS_DISPLAY_TYPE_VIDI,
};
/*
* Exynos drm common overlay structure.
*
* @base: plane object
* @src_x: offset x on a framebuffer to be displayed.
* - the unit is screen coordinates.
* @src_y: offset y on a framebuffer to be displayed.
* - the unit is screen coordinates.
* @src_width: width of a partial image to be displayed from framebuffer.
* @src_height: height of a partial image to be displayed from framebuffer.
* @fb_width: width of a framebuffer.
* @fb_height: height of a framebuffer.
* @crtc_x: offset x on hardware screen.
* @crtc_y: offset y on hardware screen.
* @crtc_width: window width to be displayed (hardware screen).
* @crtc_height: window height to be displayed (hardware screen).
* @mode_width: width of screen mode.
* @mode_height: height of screen mode.
* @h_ratio: horizontal scaling ratio, 16.16 fixed point
* @v_ratio: vertical scaling ratio, 16.16 fixed point
* @refresh: refresh rate.
* @scan_flag: interlace or progressive way.
* (it could be DRM_MODE_FLAG_*)
* @bpp: pixel size.(in bit)
* @pixel_format: fourcc pixel format of this overlay
* @dma_addr: array of bus(accessed by dma) address to the memory region
* allocated for a overlay.
* @zpos: order of overlay layer(z position).
* @enabled: enabled or not.
* @resume: to resume or not.
*
* this structure is common to exynos SoC and its contents would be copied
* to hardware specific overlay info.
*/
struct exynos_drm_plane {
struct drm_plane base;
unsigned int src_x;
unsigned int src_y;
unsigned int src_width;
unsigned int src_height;
unsigned int fb_width;
unsigned int fb_height;
unsigned int crtc_x;
unsigned int crtc_y;
unsigned int crtc_width;
unsigned int crtc_height;
unsigned int mode_width;
unsigned int mode_height;
unsigned int h_ratio;
unsigned int v_ratio;
unsigned int refresh;
unsigned int scan_flag;
unsigned int bpp;
unsigned int pitch;
uint32_t pixel_format;
dma_addr_t dma_addr[MAX_FB_BUFFER];
unsigned int zpos;
bool enabled:1;
bool resume:1;
};
/*
* Exynos DRM Display Structure.
* - this structure is common to analog tv, digital tv and lcd panel.
*
* @create_connector: initialize and register a new connector
* @remove: cleans up the display for removal
* @mode_fixup: fix mode data comparing to hw specific display mode.
* @mode_set: convert drm_display_mode to hw specific display mode and
* would be called by encoder->mode_set().
* @check_mode: check if mode is valid or not.
* @dpms: display device on or off.
* @commit: apply changes to hw
*/
struct exynos_drm_display;
struct exynos_drm_display_ops {
int (*create_connector)(struct exynos_drm_display *display,
struct drm_encoder *encoder);
void (*remove)(struct exynos_drm_display *display);
void (*mode_fixup)(struct exynos_drm_display *display,
struct drm_connector *connector,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*mode_set)(struct exynos_drm_display *display,
struct drm_display_mode *mode);
int (*check_mode)(struct exynos_drm_display *display,
struct drm_display_mode *mode);
void (*dpms)(struct exynos_drm_display *display, int mode);
void (*commit)(struct exynos_drm_display *display);
};
/*
* Exynos drm display structure, maps 1:1 with an encoder/connector
*
* @list: the list entry for this manager
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @encoder: encoder object this display maps to
* @connector: connector object this display maps to
* @ops: pointer to callbacks for exynos drm specific functionality
* @ctx: A pointer to the display's implementation specific context
*/
struct exynos_drm_display {
struct list_head list;
enum exynos_drm_output_type type;
struct drm_encoder *encoder;
struct drm_connector *connector;
struct exynos_drm_display_ops *ops;
};
/*
* Exynos drm crtc ops
*
* @enable: enable the device
* @disable: disable the device
* @mode_fixup: fix mode data before applying it
* @commit: set current hw specific display mode to hw.
* @enable_vblank: specific driver callback for enabling vblank interrupt.
* @disable_vblank: specific driver callback for disabling vblank interrupt.
* @wait_for_vblank: wait for vblank interrupt to make sure that
* hardware overlay is updated.
* @win_commit: apply hardware specific overlay data to registers.
* @win_disable: disable hardware specific overlay.
* @te_handler: trigger to transfer video image at the tearing effect
* synchronization signal if there is a page flip request.
* @clock_enable: optional function enabling/disabling display domain clock,
* called from exynos-dp driver before powering up (with
* 'enable' argument as true) and after powering down (with
* 'enable' as false).
*/
struct exynos_drm_crtc;
struct exynos_drm_crtc_ops {
void (*enable)(struct exynos_drm_crtc *crtc);
void (*disable)(struct exynos_drm_crtc *crtc);
bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*commit)(struct exynos_drm_crtc *crtc);
int (*enable_vblank)(struct exynos_drm_crtc *crtc);
void (*disable_vblank)(struct exynos_drm_crtc *crtc);
void (*wait_for_vblank)(struct exynos_drm_crtc *crtc);
void (*win_commit)(struct exynos_drm_crtc *crtc, unsigned int zpos);
void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos);
void (*te_handler)(struct exynos_drm_crtc *crtc);
void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable);
};
/*
* Exynos specific crtc structure.
*
* @base: crtc object.
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @pipe: a crtc index created at load() with a new crtc object creation
* and the crtc object would be set to private->crtc array
* to get a crtc object corresponding to this pipe from private->crtc
* array when irq interrupt occurred. the reason of using this pipe is that
* drm framework doesn't support multiple irq yet.
* we can refer to the crtc to current hardware interrupt occurred through
* this pipe value.
* @enabled: if the crtc is enabled or not
* @event: vblank event that is currently queued for flip
* @ops: pointer to callbacks for exynos drm specific functionality
* @ctx: A pointer to the crtc's implementation specific context
*/
struct exynos_drm_crtc {
struct drm_crtc base;
enum exynos_drm_output_type type;
unsigned int pipe;
bool enabled;
wait_queue_head_t pending_flip_queue;
struct drm_pending_vblank_event *event;
const struct exynos_drm_crtc_ops *ops;
void *ctx;
};
struct exynos_drm_g2d_private {
struct device *dev;
struct list_head inuse_cmdlist;
struct list_head event_list;
struct list_head userptr_list;
};
struct drm_exynos_file_private {
struct exynos_drm_g2d_private *g2d_priv;
struct device *ipp_dev;
};
/*
* Exynos drm private structure.
*
* @da_start: start address to device address space.
* with iommu, device address space starts from this address
* otherwise default one.
* @da_space_size: size of device address space.
* if 0 then default value is used for it.
* @pipe: the pipe number for this crtc/manager.
*/
struct exynos_drm_private {
struct drm_fb_helper *fb_helper;
/*
* created crtc object would be contained at this array and
* this array is used to be aware of which crtc did it request vblank.
*/
struct drm_crtc *crtc[MAX_CRTC];
struct drm_property *plane_zpos_property;
unsigned long da_start;
unsigned long da_space_size;
unsigned int pipe;
};
/*
* Exynos drm sub driver structure.
*
* @list: sub driver has its own list object to register to exynos drm driver.
* @dev: pointer to device object for subdrv device driver.
* @drm_dev: pointer to drm_device and this pointer would be set
* when sub driver calls exynos_drm_subdrv_register().
* @probe: this callback would be called by exynos drm driver after
* subdrv is registered to it.
* @remove: this callback is used to release resources created
* by probe callback.
* @open: this would be called with drm device file open.
* @close: this would be called with drm device file close.
*/
struct exynos_drm_subdrv {
struct list_head list;
struct device *dev;
struct drm_device *drm_dev;
int (*probe)(struct drm_device *drm_dev, struct device *dev);
void (*remove)(struct drm_device *drm_dev, struct device *dev);
int (*open)(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file);
void (*close)(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file);
};
/* This function would be called by non kms drivers such as g2d and ipp. */
int exynos_drm_subdrv_register(struct exynos_drm_subdrv *drm_subdrv);
/* this function removes subdrv list from exynos drm driver */
int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *drm_subdrv);
int exynos_drm_device_subdrv_probe(struct drm_device *dev);
int exynos_drm_device_subdrv_remove(struct drm_device *dev);
int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file);
void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file);
#ifdef CONFIG_DRM_EXYNOS_DPI
struct exynos_drm_display * exynos_dpi_probe(struct device *dev);
int exynos_dpi_remove(struct exynos_drm_display *display);
#else
static inline struct exynos_drm_display *
exynos_dpi_probe(struct device *dev) { return NULL; }
static inline int exynos_dpi_remove(struct exynos_drm_display *display)
{
return 0;
}
#endif
/* This function creates a encoder and a connector, and initializes them. */
int exynos_drm_create_enc_conn(struct drm_device *dev,
struct exynos_drm_display *display);
extern struct platform_driver fimd_driver;
extern struct platform_driver decon_driver;
extern struct platform_driver dp_driver;
extern struct platform_driver dsi_driver;
extern struct platform_driver mixer_driver;
extern struct platform_driver hdmi_driver;
extern struct platform_driver exynos_drm_common_hdmi_driver;
extern struct platform_driver vidi_driver;
extern struct platform_driver g2d_driver;
extern struct platform_driver fimc_driver;
extern struct platform_driver rotator_driver;
extern struct platform_driver gsc_driver;
extern struct platform_driver ipp_driver;
#endif
