/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include "i915_drv.h"
#include "intel_drv.h"
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
* automatically adapt to HDMI connections as well
*/
static const u32 hsw_ddi_translations_dp[] = {
0x00FFFFFF, 0x0006000E, /* DP parameters */
0x00D75FFF, 0x0005000A,
0x00C30FFF, 0x00040006,
0x80AAAFFF, 0x000B0000,
0x00FFFFFF, 0x0005000A,
0x00D75FFF, 0x000C0004,
0x80C30FFF, 0x000B0000,
0x00FFFFFF, 0x00040006,
0x80D75FFF, 0x000B0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
static const u32 hsw_ddi_translations_fdi[] = {
0x00FFFFFF, 0x0007000E, /* FDI parameters */
0x00D75FFF, 0x000F000A,
0x00C30FFF, 0x00060006,
0x00AAAFFF, 0x001E0000,
0x00FFFFFF, 0x000F000A,
0x00D75FFF, 0x00160004,
0x00C30FFF, 0x001E0000,
0x00FFFFFF, 0x00060006,
0x00D75FFF, 0x001E0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
/* On Haswell, DDI port buffers must be programmed with correct values
* in advance. The buffer values are different for FDI and DP modes,
* but the HDMI/DVI fields are shared among those. So we program the DDI
* in either FDI or DP modes only, as HDMI connections will work with both
* of those
*/
void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, bool use_fdi_mode)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
int i;
const u32 *ddi_translations = ((use_fdi_mode) ?
hsw_ddi_translations_fdi :
hsw_ddi_translations_dp);
DRM_DEBUG_DRIVER("Initializing DDI buffers for port %c in %s mode\n",
port_name(port),
use_fdi_mode ? "FDI" : "DP");
WARN((use_fdi_mode && (port != PORT_E)),
"Programming port %c in FDI mode, this probably will not work.\n",
port_name(port));
for (i=0, reg=DDI_BUF_TRANS(port); i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) {
I915_WRITE(reg, ddi_translations[i]);
reg += 4;
}
}
/* Program DDI buffers translations for DP. By default, program ports A-D in DP
* mode and port E for FDI.
*/
void intel_prepare_ddi(struct drm_device *dev)
{
int port;
if (IS_HASWELL(dev)) {
for (port = PORT_A; port < PORT_E; port++)
intel_prepare_ddi_buffers(dev, port, false);
/* DDI E is the suggested one to work in FDI mode, so program is as such by
* default. It will have to be re-programmed in case a digital DP output
* will be detected on it
*/
intel_prepare_ddi_buffers(dev, PORT_E, true);
}
}
static const long hsw_ddi_buf_ctl_values[] = {
DDI_BUF_EMP_400MV_0DB_HSW,
DDI_BUF_EMP_400MV_3_5DB_HSW,
DDI_BUF_EMP_400MV_6DB_HSW,
DDI_BUF_EMP_400MV_9_5DB_HSW,
DDI_BUF_EMP_600MV_0DB_HSW,
DDI_BUF_EMP_600MV_3_5DB_HSW,
DDI_BUF_EMP_600MV_6DB_HSW,
DDI_BUF_EMP_800MV_0DB_HSW,
DDI_BUF_EMP_800MV_3_5DB_HSW
};
/* Starting with Haswell, different DDI ports can work in FDI mode for
* connection to the PCH-located connectors. For this, it is necessary to train
* both the DDI port and PCH receiver for the desired DDI buffer settings.
*
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
u32 reg, temp, i;
/* Configure CPU PLL, wait for warmup */
I915_WRITE(SPLL_CTL,
SPLL_PLL_ENABLE |
SPLL_PLL_FREQ_1350MHz |
SPLL_PLL_SCC);
/* Use SPLL to drive the output when in FDI mode */
I915_WRITE(PORT_CLK_SEL(PORT_E),
PORT_CLK_SEL_SPLL);
I915_WRITE(PIPE_CLK_SEL(pipe),
PIPE_CLK_SEL_PORT(PORT_E));
udelay(20);
/* Start the training iterating through available voltages and emphasis */
for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp = (temp & ~DDI_BUF_EMP_MASK);
I915_WRITE(DDI_BUF_CTL(PORT_E),
temp |
DDI_BUF_CTL_ENABLE |
DDI_PORT_WIDTH_X2 |
hsw_ddi_buf_ctl_values[i]);
udelay(600);
/* Enable CPU FDI Receiver with auto-training */
reg = FDI_RX_CTL(pipe);
I915_WRITE(reg,
I915_READ(reg) |
FDI_LINK_TRAIN_AUTO |
FDI_RX_ENABLE |
FDI_LINK_TRAIN_PATTERN_1_CPT |
FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_PORT_WIDTH_2X_LPT |
FDI_RX_PLL_ENABLE);
POSTING_READ(reg);
udelay(100);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
temp = I915_READ(DDI_FUNC_CTL(pipe));
temp &= ~PIPE_DDI_PORT_MASK;
temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
PIPE_DDI_MODE_SELECT_FDI |
PIPE_DDI_FUNC_ENABLE |
PIPE_DDI_PORT_WIDTH_X2;
I915_WRITE(DDI_FUNC_CTL(pipe),
temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
/* Disable DP_TP_CTL and FDI_RX_CTL) and retry */
I915_WRITE(DP_TP_CTL(PORT_E),
I915_READ(DP_TP_CTL(PORT_E)) &
~DP_TP_CTL_ENABLE);
I915_WRITE(FDI_RX_CTL(pipe),
I915_READ(FDI_RX_CTL(pipe)) &
~FDI_RX_PLL_ENABLE);
continue;
}
}
DRM_DEBUG_KMS("FDI train done.\n");
}
/* For DDI connections, it is possible to support different outputs over the
* same DDI port, such as HDMI or DP or even VGA via FDI. So we don't know by
* the time the output is detected what exactly is on the other end of it. This
* function aims at providing support for this detection and proper output
* configuration.
*/
void intel_ddi_init(struct drm_device *dev, enum port port)
{
/* For now, we don't do any proper output detection and assume that we
* handle HDMI only */
switch(port){
case PORT_A:
/* We don't handle eDP and DP yet */
DRM_DEBUG_DRIVER("Found digital output on DDI port A\n");
break;
/* Assume that the ports B, C and D are working in HDMI mode for now */
case PORT_B:
case PORT_C:
case PORT_D:
intel_hdmi_init(dev, DDI_BUF_CTL(port));
break;
default:
DRM_DEBUG_DRIVER("No handlers defined for port %d, skipping DDI initialization\n",
port);
break;
}
}
