/*
* demux.h
*
* Copyright (c) 2002 Convergence GmbH
*
* based on code:
* Copyright (c) 2000 Nokia Research Center
* Tampere, FINLAND
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#ifndef __DEMUX_H
#define __DEMUX_H
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/time.h>
#include <linux/dvb/dmx.h>
/*--------------------------------------------------------------------------*/
/* Common definitions */
/*--------------------------------------------------------------------------*/
/*
* DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter.
*/
#ifndef DMX_MAX_FILTER_SIZE
#define DMX_MAX_FILTER_SIZE 18
#endif
/*
* DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed filter.
*/
#ifndef DMX_MAX_SECTION_SIZE
#define DMX_MAX_SECTION_SIZE 4096
#endif
#ifndef DMX_MAX_SECFEED_SIZE
#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188)
#endif
/*--------------------------------------------------------------------------*/
/* TS packet reception */
/*--------------------------------------------------------------------------*/
/* TS filter type for set() */
#define TS_PACKET 1 /* send TS packets (188 bytes) to callback (default) */
#define TS_PAYLOAD_ONLY 2 /* in case TS_PACKET is set, only send the TS
payload (<=184 bytes per packet) to callback */
#define TS_DECODER 4 /* send stream to built-in decoder (if present) */
#define TS_DEMUX 8 /* in case TS_PACKET is set, send the TS to
the demux device, not to the dvr device */
struct dmx_ts_feed {
int is_filtering; /* Set to non-zero when filtering in progress */
struct dmx_demux *parent; /* Back-pointer */
void *priv; /* Pointer to private data of the API client */
int (*set) (struct dmx_ts_feed *feed,
u16 pid,
int type,
enum dmx_ts_pes pes_type,
size_t circular_buffer_size,
struct timespec timeout);
int (*start_filtering) (struct dmx_ts_feed* feed);
int (*stop_filtering) (struct dmx_ts_feed* feed);
};
/*--------------------------------------------------------------------------*/
/* Section reception */
/*--------------------------------------------------------------------------*/
struct dmx_section_filter {
u8 filter_value [DMX_MAX_FILTER_SIZE];
u8 filter_mask [DMX_MAX_FILTER_SIZE];
u8 filter_mode [DMX_MAX_FILTER_SIZE];
struct dmx_section_feed* parent; /* Back-pointer */
void* priv; /* Pointer to private data of the API client */
};
struct dmx_section_feed {
int is_filtering; /* Set to non-zero when filtering in progress */
struct dmx_demux* parent; /* Back-pointer */
void* priv; /* Pointer to private data of the API client */
int check_crc;
u32 crc_val;
u8 *secbuf;
u8 secbuf_base[DMX_MAX_SECFEED_SIZE];
u16 secbufp, seclen, tsfeedp;
int (*set) (struct dmx_section_feed* feed,
u16 pid,
size_t circular_buffer_size,
int check_crc);
int (*allocate_filter) (struct dmx_section_feed* feed,
struct dmx_section_filter** filter);
int (*release_filter) (struct dmx_section_feed* feed,
struct dmx_section_filter* filter);
int (*start_filtering) (struct dmx_section_feed* feed);
int (*stop_filtering) (struct dmx_section_feed* feed);
};
/*--------------------------------------------------------------------------*/
/* Callback functions */
/*--------------------------------------------------------------------------*/
typedef int (*dmx_ts_cb) ( const u8 * buffer1,
size_t buffer1_length,
const u8 * buffer2,
size_t buffer2_length,
struct dmx_ts_feed* source);
typedef int (*dmx_section_cb) ( const u8 * buffer1,
size_t buffer1_len,
const u8 * buffer2,
size_t buffer2_len,
struct dmx_section_filter * source);
/*--------------------------------------------------------------------------*/
/* DVB Front-End */
/*--------------------------------------------------------------------------*/
enum dmx_frontend_source {
DMX_MEMORY_FE,
DMX_FRONTEND_0,
};
struct dmx_frontend {
struct list_head connectivity_list; /* List of front-ends that can
be connected to a particular
demux */
enum dmx_frontend_source source;
};
/*--------------------------------------------------------------------------*/
/* MPEG-2 TS Demux */
/*--------------------------------------------------------------------------*/
/*
* Flags OR'ed in the capabilities field of struct dmx_demux.
*/
#define DMX_TS_FILTERING 1
#define DMX_PES_FILTERING 2
#define DMX_SECTION_FILTERING 4
#define DMX_MEMORY_BASED_FILTERING 8 /* write() available */
#define DMX_CRC_CHECKING 16
#define DMX_TS_DESCRAMBLING 32
/*
* Demux resource type identifier.
*/
/*
* DMX_FE_ENTRY(): Casts elements in the list of registered
* front-ends from the generic type struct list_head
* to the type * struct dmx_frontend
*.
*/
#define DMX_FE_ENTRY(list) list_entry(list, struct dmx_frontend, connectivity_list)
/**
* struct dmx_demux - Structure that contains the demux capabilities and
* callbacks.
*
* @capabilities: Bitfield of capability flags
*
* @frontend: Front-end connected to the demux
*
* @priv: Pointer to private data of the API client
*
* @open: This function reserves the demux for use by the caller and, if
* necessary, initializes the demux. When the demux is no longer needed,
* the function @close should be called. It should be possible for
* multiple clients to access the demux at the same time. Thus, the
* function implementation should increment the demux usage count when
* @open is called and decrement it when @close is called.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* It returns
* 0 on success;
* -EUSERS, if maximum usage count was reached;
* -EINVAL, on bad parameter.
*
* @close: This function reserves the demux for use by the caller and, if
* necessary, initializes the demux. When the demux is no longer needed,
* the function @close should be called. It should be possible for
* multiple clients to access the demux at the same time. Thus, the
* function implementation should increment the demux usage count when
* @open is called and decrement it when @close is called.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* It returns
* 0 on success;
* -ENODEV, if demux was not in use (e. g. no users);
* -EINVAL, on bad parameter.
*
* @write: This function provides the demux driver with a memory buffer
* containing TS packets. Instead of receiving TS packets from the DVB
* front-end, the demux driver software will read packets from memory.
* Any clients of this demux with active TS, PES or Section filters will
* receive filtered data via the Demux callback API (see 0). The function
* returns when all the data in the buffer has been consumed by the demux.
* Demux hardware typically cannot read TS from memory. If this is the
* case, memory-based filtering has to be implemented entirely in software.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @buf function parameter contains a pointer to the TS data in
* kernel-space memory.
* The @count function parameter contains the length of the TS data.
* It returns
* 0 on success;
* -ERESTARTSYS, if mutex lock was interrupted;
* -EINTR, if a signal handling is pending;
* -ENODEV, if demux was removed;
* -EINVAL, on bad parameter.
*
* @allocate_ts_feed: Allocates a new TS feed, which is used to filter the TS
* packets carrying a certain PID. The TS feed normally corresponds to a
* hardware PID filter on the demux chip.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @feed function parameter contains a pointer to the TS feed API and
* instance data.
* The @callback function parameter contains a pointer to the callback
* function for passing received TS packet.
* It returns
* 0 on success;
* -ERESTARTSYS, if mutex lock was interrupted;
* -EBUSY, if no more TS feeds is available;
* -EINVAL, on bad parameter.
*
* @release_ts_feed: Releases the resources allocated with @allocate_ts_feed.
* Any filtering in progress on the TS feed should be stopped before
* calling this function.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @feed function parameter contains a pointer to the TS feed API and
* instance data.
* It returns
* 0 on success;
* -EINVAL on bad parameter.
*
* @allocate_section_feed: Allocates a new section feed, i.e. a demux resource
* for filtering and receiving sections. On platforms with hardware
* support for section filtering, a section feed is directly mapped to
* the demux HW. On other platforms, TS packets are first PID filtered in
* hardware and a hardware section filter then emulated in software. The
* caller obtains an API pointer of type dmx_section_feed_t as an out
* parameter. Using this API the caller can set filtering parameters and
* start receiving sections.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @feed function parameter contains a pointer to the TS feed API and
* instance data.
* The @callback function parameter contains a pointer to the callback
* function for passing received TS packet.
* It returns
* 0 on success;
* -EBUSY, if no more TS feeds is available;
* -EINVAL, on bad parameter.
*
* @release_section_feed: Releases the resources allocated with
* @allocate_section_feed, including allocated filters. Any filtering in
* progress on the section feed should be stopped before calling this
* function.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @feed function parameter contains a pointer to the TS feed API and
* instance data.
* It returns
* 0 on success;
* -EINVAL, on bad parameter.
*
* @add_frontend: Registers a connectivity between a demux and a front-end,
* i.e., indicates that the demux can be connected via a call to
* @connect_frontend to use the given front-end as a TS source. The
* client of this function has to allocate dynamic or static memory for
* the frontend structure and initialize its fields before calling this
* function. This function is normally called during the driver
* initialization. The caller must not free the memory of the frontend
* struct before successfully calling @remove_frontend.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @frontend function parameter contains a pointer to the front-end
* instance data.
* It returns
* 0 on success;
* -EINVAL, on bad parameter.
*
* @remove_frontend: Indicates that the given front-end, registered by a call
* to @add_frontend, can no longer be connected as a TS source by this
* demux. The function should be called when a front-end driver or a demux
* driver is removed from the system. If the front-end is in use, the
* function fails with the return value of -EBUSY. After successfully
* calling this function, the caller can free the memory of the frontend
* struct if it was dynamically allocated before the @add_frontend
* operation.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @frontend function parameter contains a pointer to the front-end
* instance data.
* It returns
* 0 on success;
* -ENODEV, if the front-end was not found,
* -EINVAL, on bad parameter.
*
* @get_frontends: Provides the APIs of the front-ends that have been
* registered for this demux. Any of the front-ends obtained with this
* call can be used as a parameter for @connect_frontend. The include
* file demux.h contains the macro DMX_FE_ENTRY() for converting an
* element of the generic type struct &list_head * to the type
* struct &dmx_frontend *. The caller must not free the memory of any of
* the elements obtained via this function call.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* It returns a struct list_head pointer to the list of front-end
* interfaces, or NULL in the case of an empty list.
*
* @connect_frontend: Connects the TS output of the front-end to the input of
* the demux. A demux can only be connected to a front-end registered to
* the demux with the function @add_frontend. It may or may not be
* possible to connect multiple demuxes to the same front-end, depending
* on the capabilities of the HW platform. When not used, the front-end
* should be released by calling @disconnect_frontend.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @frontend function parameter contains a pointer to the front-end
* instance data.
* It returns
* 0 on success;
* -EINVAL, on bad parameter.
*
* @disconnect_frontend: Disconnects the demux and a front-end previously
* connected by a @connect_frontend call.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* It returns
* 0 on success;
* -EINVAL on bad parameter.
*
* @get_pes_pids: Get the PIDs for DMX_PES_AUDIO0, DMX_PES_VIDEO0,
* DMX_PES_TELETEXT0, DMX_PES_SUBTITLE0 and DMX_PES_PCR0.
* The @demux function parameter contains a pointer to the demux API and
* instance data.
* The @pids function parameter contains an array with five u16 elements
* where the PIDs will be stored.
* It returns
* 0 on success;
* -EINVAL on bad parameter.
*/
struct dmx_demux {
u32 capabilities;
struct dmx_frontend* frontend;
void* priv;
int (*open) (struct dmx_demux* demux);
int (*close) (struct dmx_demux* demux);
int (*write) (struct dmx_demux* demux, const char __user *buf, size_t count);
int (*allocate_ts_feed) (struct dmx_demux* demux,
struct dmx_ts_feed** feed,
dmx_ts_cb callback);
int (*release_ts_feed) (struct dmx_demux* demux,
struct dmx_ts_feed* feed);
int (*allocate_section_feed) (struct dmx_demux* demux,
struct dmx_section_feed** feed,
dmx_section_cb callback);
int (*release_section_feed) (struct dmx_demux* demux,
struct dmx_section_feed* feed);
int (*add_frontend) (struct dmx_demux* demux,
struct dmx_frontend* frontend);
int (*remove_frontend) (struct dmx_demux* demux,
struct dmx_frontend* frontend);
struct list_head* (*get_frontends) (struct dmx_demux* demux);
int (*connect_frontend) (struct dmx_demux* demux,
struct dmx_frontend* frontend);
int (*disconnect_frontend) (struct dmx_demux* demux);
int (*get_pes_pids) (struct dmx_demux* demux, u16 *pids);
/* private: Not used upstream and never documented */
#if 0
int (*get_caps) (struct dmx_demux* demux, struct dmx_caps *caps);
int (*set_source) (struct dmx_demux* demux, const dmx_source_t *src);
#endif
/*
* private: Only used at av7110, to read some data from firmware.
* As this was never documented, we have no clue about what's
* there, and its usage on other drivers aren't encouraged.
*/
int (*get_stc) (struct dmx_demux* demux, unsigned int num,
u64 *stc, unsigned int *base);
};
#endif /* #ifndef __DEMUX_H */
