/*
* Rafael Micro R820T driver
*
* Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com>
*
* This driver was written from scratch, based on an existing driver
* that it is part of rtl-sdr git tree, released under GPLv2:
* https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug
* https://github.com/n1gp/gr-baz
*
* From what I understood from the threads, the original driver was converted
* to userspace from a Realtek tree. I couldn't find the original tree.
* However, the original driver look awkward on my eyes. So, I decided to
* write a new version from it from the scratch, while trying to reproduce
* everything found there.
*
* TODO:
* After locking, the original driver seems to have some routines to
* improve reception. This was not implemented here yet.
*
* RF Gain set/get is not implemented.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/videodev2.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/bitrev.h>
#include <asm/div64.h>
#include "tuner-i2c.h"
#include "r820t.h"
/*
* FIXME: I think that there are only 32 registers, but better safe than
* sorry. After finishing the driver, we may review it.
*/
#define REG_SHADOW_START 5
#define NUM_REGS 27
#define VER_NUM 49
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
/*
* enums and structures
*/
enum xtal_cap_value {
XTAL_LOW_CAP_30P = 0,
XTAL_LOW_CAP_20P,
XTAL_LOW_CAP_10P,
XTAL_LOW_CAP_0P,
XTAL_HIGH_CAP_0P
};
struct r820t_priv {
struct list_head hybrid_tuner_instance_list;
const struct r820t_config *cfg;
struct tuner_i2c_props i2c_props;
struct mutex lock;
u8 regs[NUM_REGS];
u8 buf[NUM_REGS + 1];
enum xtal_cap_value xtal_cap_sel;
u16 pll; /* kHz */
u32 int_freq;
u8 fil_cal_code;
bool imr_done;
/* Store current mode */
u32 delsys;
enum v4l2_tuner_type type;
v4l2_std_id std;
u32 bw; /* in MHz */
bool has_lock;
};
struct r820t_freq_range {
u32 freq;
u8 open_d;
u8 rf_mux_ploy;
u8 tf_c;
u8 xtal_cap20p;
u8 xtal_cap10p;
u8 xtal_cap0p;
u8 imr_mem; /* Not used, currently */
};
#define VCO_POWER_REF 0x02
#define DIP_FREQ 32000000
/*
* Static constants
*/
static LIST_HEAD(hybrid_tuner_instance_list);
static DEFINE_MUTEX(r820t_list_mutex);
/* Those initial values start from REG_SHADOW_START */
static const u8 r820t_init_array[NUM_REGS] = {
0x83, 0x32, 0x75, /* 05 to 07 */
0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */
0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */
0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */
0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */
0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */
0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */
};
/* Tuner frequency ranges */
static const struct r820t_freq_range freq_ranges[] = {
{
.freq = 0,
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0xdf, /* R27[7:0] band2,band0 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 50, /* Start freq, in MHz */
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0xbe, /* R27[7:0] band4,band1 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 55, /* Start freq, in MHz */
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x8b, /* R27[7:0] band7,band4 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 60, /* Start freq, in MHz */
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x7b, /* R27[7:0] band8,band4 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 65, /* Start freq, in MHz */
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x69, /* R27[7:0] band9,band6 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 70, /* Start freq, in MHz */
.open_d = 0x08, /* low */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x58, /* R27[7:0] band10,band7 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 75, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x44, /* R27[7:0] band11,band11 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 80, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x44, /* R27[7:0] band11,band11 */
.xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 90, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x34, /* R27[7:0] band12,band11 */
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 100, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x34, /* R27[7:0] band12,band11 */
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 0,
}, {
.freq = 110, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x24, /* R27[7:0] band13,band11 */
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 1,
}, {
.freq = 120, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x24, /* R27[7:0] band13,band11 */
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 1,
}, {
.freq = 140, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x14, /* R27[7:0] band14,band11 */
.xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */
.xtal_cap10p = 0x01,
.xtal_cap0p = 0x00,
.imr_mem = 1,
}, {
.freq = 180, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x13, /* R27[7:0] band14,band12 */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 1,
}, {
.freq = 220, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x13, /* R27[7:0] band14,band12 */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 2,
}, {
.freq = 250, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x11, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 2,
}, {
.freq = 280, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */
.tf_c = 0x00, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 2,
}, {
.freq = 310, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */
.tf_c = 0x00, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 2,
}, {
.freq = 450, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */
.tf_c = 0x00, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 3,
}, {
.freq = 588, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */
.tf_c = 0x00, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 3,
}, {
.freq = 650, /* Start freq, in MHz */
.open_d = 0x00, /* high */
.rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */
.tf_c = 0x00, /* R27[7:0] highest,highest */
.xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */
.xtal_cap10p = 0x00,
.xtal_cap0p = 0x00,
.imr_mem = 4,
}
};
static int r820t_xtal_capacitor[][2] = {
{ 0x0b, XTAL_LOW_CAP_30P },
{ 0x02, XTAL_LOW_CAP_20P },
{ 0x01, XTAL_LOW_CAP_10P },
{ 0x00, XTAL_LOW_CAP_0P },
{ 0x10, XTAL_HIGH_CAP_0P },
};
/*
* measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm
* input power, for raw results see:
* http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/
*/
static const int r820t_lna_gain_steps[] = {
0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13
};
static const int r820t_mixer_gain_steps[] = {
0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8
};
/*
* I2C read/write code and shadow registers logic
*/
static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val,
int len)
{
int r = reg - REG_SHADOW_START;
if (r < 0) {
len += r;
r = 0;
}
if (len <= 0)
return;
if (len > NUM_REGS)
len = NUM_REGS;
tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n",
__func__, r + REG_SHADOW_START, len, len, val);
memcpy(&priv->regs[r], val, len);
}
static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val,
int len)
{
int rc, size, pos = 0;
/* Store the shadow registers */
shadow_store(priv, reg, val, len);
do {
if (len > priv->cfg->max_i2c_msg_len - 1)
size = priv->cfg->max_i2c_msg_len - 1;
else
size = len;
/* Fill I2C buffer */
priv->buf[0] = reg;
memcpy(&priv->buf[1], &val[pos], size);
rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1);
if (rc != size + 1) {
tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n",
__func__, rc, reg, size, size, &priv->buf[1]);
if (rc < 0)
return rc;
return -EREMOTEIO;
}
tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n",
__func__, reg, size, size, &priv->buf[1]);
reg += size;
len -= size;
pos += size;
} while (len > 0);
return 0;
}
static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
return r820t_write(priv, reg, &val, 1);
}
static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
int r = reg - REG_SHADOW_START;
if (r >= 0 && r < NUM_REGS)
val = (priv->regs[r] & ~bit_mask) | (val & bit_mask);
else
return -EINVAL;
return r820t_write(priv, reg, &val, 1);
}
static int r820_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
{
int rc, i;
u8 *p = &priv->buf[1];
priv->buf[0] = reg;
rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len);
if (rc != len) {
tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n",
__func__, rc, reg, len, len, p);
if (rc < 0)
return rc;
return -EREMOTEIO;
}
/* Copy data to the output buffer */
for (i = 0; i < len; i++)
val[i] = bitrev8(p[i]);
tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n",
__func__, reg, len, len, val);
return 0;
}
/*
* r820t tuning logic
*/
static int r820t_set_mux(struct r820t_priv *priv, u32 freq)
{
const struct r820t_freq_range *range;
int i, rc;
u8 val;
/* Get the proper frequency range */
freq = freq / 1000000;
for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) {
if (freq < freq_ranges[i + 1].freq)
break;
}
range = &freq_ranges[i];
tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq);
/* Open Drain */
rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08);
if (rc < 0)
return rc;
/* RF_MUX,Polymux */
rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3);
if (rc < 0)
return rc;
/* TF BAND */
rc = r820t_write_reg(priv, 0x1b, range->tf_c);
if (rc < 0)
return rc;
/* XTAL CAP & Drive */
switch (priv->xtal_cap_sel) {
case XTAL_LOW_CAP_30P:
case XTAL_LOW_CAP_20P:
val = range->xtal_cap20p | 0x08;
break;
case XTAL_LOW_CAP_10P:
val = range->xtal_cap10p | 0x08;
break;
case XTAL_HIGH_CAP_0P:
val = range->xtal_cap0p | 0x00;
break;
default:
case XTAL_LOW_CAP_0P:
val = range->xtal_cap0p | 0x08;
break;
}
rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b);
if (rc < 0)
return rc;
/*
* FIXME: the original driver has a logic there with preserves
* gain/phase from registers 8 and 9 reading the data from the
* registers before writing, if "IMF done". That code was sort of
* commented there, as the flag is always false.
*/
rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f);
return rc;
}
static int r820t_set_pll(struct r820t_priv *priv, u32 freq)
{
u64 tmp64, vco_freq;
int rc, i;
u32 vco_fra; /* VCO contribution by SDM (kHz) */
u32 vco_min = 1770000;
u32 vco_max = vco_min * 2;
u32 pll_ref;
u16 n_sdm = 2;
u16 sdm = 0;
u8 mix_div = 2;
u8 div_buf = 0;
u8 div_num = 0;
u8 ni, si, nint, vco_fine_tune, val;
u8 data[5];
freq = freq / 1000; /* Frequency in kHz */
pll_ref = priv->cfg->xtal / 1000;
tuner_dbg("set r820t pll for frequency %d kHz = %d\n", freq, pll_ref);
/* FIXME: this seems to be a hack - probably it can be removed */
rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x00);
if (rc < 0)
return rc;
/* set pll autotune = 128kHz */
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
if (rc < 0)
return rc;
/* set VCO current = 100 */
rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0);
if (rc < 0)
return rc;
/* Calculate divider */
while (mix_div <= 64) {
if (((freq * mix_div) >= vco_min) &&
((freq * mix_div) < vco_max)) {
div_buf = mix_div;
while (div_buf > 2) {
div_buf = div_buf >> 1;
div_num++;
}
break;
}
mix_div = mix_div << 1;
}
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
return rc;
vco_fine_tune = (data[4] & 0x30) >> 4;
if (vco_fine_tune > VCO_POWER_REF)
div_num = div_num - 1;
else if (vco_fine_tune < VCO_POWER_REF)
div_num = div_num + 1;
rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0);
if (rc < 0)
return rc;
vco_freq = (u64)(freq * (u64)mix_div);
tmp64 = vco_freq;
do_div(tmp64, 2 * pll_ref);
nint = (u8)tmp64;
tmp64 = vco_freq - ((u64)2) * pll_ref * nint;
do_div(tmp64, 1000);
vco_fra = (u16)(tmp64);
pll_ref /= 1000;
/* boundary spur prevention */
if (vco_fra < pll_ref / 64) {
vco_fra = 0;
} else if (vco_fra > pll_ref * 127 / 64) {
vco_fra = 0;
nint++;
} else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) {
vco_fra = pll_ref * 127 / 128;
} else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) {
vco_fra = pll_ref * 129 / 128;
}
if (nint > 63) {
tuner_info("No valid PLL values for %u kHz!\n", freq);
return -EINVAL;
}
ni = (nint - 13) / 4;
si = nint - 4 * ni - 13;
rc = r820t_write_reg(priv, 0x14, ni + (si << 6));
if (rc < 0)
return rc;
/* pw_sdm */
if (!vco_fra)
val = 0x08;
else
val = 0x00;
rc = r820t_write_reg_mask(priv, 0x12, val, 0x08);
if (rc < 0)
return rc;
/* sdm calculator */
while (vco_fra > 1) {
if (vco_fra > (2 * pll_ref / n_sdm)) {
sdm = sdm + 32768 / (n_sdm / 2);
vco_fra = vco_fra - 2 * pll_ref / n_sdm;
if (n_sdm >= 0x8000)
break;
}
n_sdm = n_sdm << 1;
}
rc = r820t_write_reg_mask(priv, 0x16, sdm >> 8, 0x08);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x15, sdm & 0xff, 0x08);
if (rc < 0)
return rc;
for (i = 0; i < 2; i++) {
/*
* FIXME: Rafael chips R620D, R828D and R828 seems to
* need 20 ms for analog TV
*/
msleep(10);
/* Check if PLL has locked */
rc = r820_read(priv, 0x00, data, 3);
if (rc < 0)
return rc;
if (data[2] & 0x40)
break;
if (!i) {
/* Didn't lock. Increase VCO current */
rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0);
if (rc < 0)
return rc;
}
}
if (!(data[2] & 0x40)) {
priv->has_lock = false;
return 0;
}
priv->has_lock = true;
tuner_dbg("tuner has lock at frequency %d kHz\n", freq);
/* set pll autotune = 8kHz */
rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08);
return rc;
}
static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq,
enum v4l2_tuner_type type,
v4l2_std_id std,
u32 delsys)
{
int rc;
u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l;
u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur;
tuner_dbg("adjusting tuner parameters for the standard\n");
switch (delsys) {
case SYS_DVBT:
if ((freq == 506000000) || (freq == 666000000) ||
(freq == 818000000)) {
mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
cp_cur = 0x28; /* 101, 0.2 */
div_buf_cur = 0x20; /* 10, 200u */
} else {
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
cp_cur = 0x38; /* 111, auto */
div_buf_cur = 0x30; /* 11, 150u */
}
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
air_cable1_in = 0x00;
cable2_in = 0x00;
pre_dect = 0x40;
lna_discharge = 14;
filter_cur = 0x40; /* 10, low */
break;
case SYS_DVBT2:
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
air_cable1_in = 0x00;
cable2_in = 0x00;
pre_dect = 0x40;
lna_discharge = 14;
cp_cur = 0x38; /* 111, auto */
div_buf_cur = 0x30; /* 11, 150u */
filter_cur = 0x40; /* 10, low */
break;
case SYS_ISDBT:
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
air_cable1_in = 0x00;
cable2_in = 0x00;
pre_dect = 0x40;
lna_discharge = 14;
cp_cur = 0x38; /* 111, auto */
div_buf_cur = 0x30; /* 11, 150u */
filter_cur = 0x40; /* 10, low */
break;
default: /* DVB-T 8M */
mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */
lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */
lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */
mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */
air_cable1_in = 0x00;
cable2_in = 0x00;
pre_dect = 0x40;
lna_discharge = 14;
cp_cur = 0x38; /* 111, auto */
div_buf_cur = 0x30; /* 11, 150u */
filter_cur = 0x40; /* 10, low */
break;
}
if (priv->cfg->use_diplexer &&
((priv->cfg->rafael_chip == CHIP_R820T) ||
(priv->cfg->rafael_chip == CHIP_R828S) ||
(priv->cfg->rafael_chip == CHIP_R820C))) {
if (freq > DIP_FREQ)
air_cable1_in = 0x00;
else
air_cable1_in = 0x60;
cable2_in = 0x00;
}
rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x0d, lna_vth_l);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x0e, mixer_vth_l);
if (rc < 0)
return rc;
/* Air-IN only for Astrometa */
rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60);
if (rc < 0)
return rc;
/*
* Original driver initializes regs 0x05 and 0x06 with the
* same value again on this point. Probably, it is just an
* error there
*/
/*
* Set LNA
*/
tuner_dbg("adjusting LNA parameters\n");
if (type != V4L2_TUNER_ANALOG_TV) {
/* LNA TOP: lowest */
rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38);
if (rc < 0)
return rc;
/* 0: normal mode */
rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04);
if (rc < 0)
return rc;
/* 0: PRE_DECT off */
rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40);
if (rc < 0)
return rc;
/* agc clk 250hz */
rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30);
if (rc < 0)
return rc;
msleep(250);
/* write LNA TOP = 3 */
rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38);
if (rc < 0)
return rc;
/*
* write discharge mode
* FIXME: IMHO, the mask here is wrong, but it matches
* what's there at the original driver
*/
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
if (rc < 0)
return rc;
/* LNA discharge current */
rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
if (rc < 0)
return rc;
/* agc clk 60hz */
rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30);
if (rc < 0)
return rc;
} else {
/* PRE_DECT off */
rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40);
if (rc < 0)
return rc;
/* write LNA TOP */
rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38);
if (rc < 0)
return rc;
/*
* write discharge mode
* FIXME: IMHO, the mask here is wrong, but it matches
* what's there at the original driver
*/
rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04);
if (rc < 0)
return rc;
/* LNA discharge current */
rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f);
if (rc < 0)
return rc;
/* agc clk 1Khz, external det1 cap 1u */
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30);
if (rc < 0)
return rc;
rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04);
if (rc < 0)
return rc;
}
return 0;
}
static int r820t_set_tv_standard(struct r820t_priv *priv,
unsigned bw,
enum v4l2_tuner_type type,
v4l2_std_id std, u32 delsys)
{
int rc, i;
u32 if_khz, filt_cal_lo;
u8 data[5], val;
u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through;
u8 lt_att, flt_ext_widest, polyfil_cur;
bool need_calibration;
tuner_dbg("selecting the delivery system\n");
if (delsys == SYS_ISDBT) {
if_khz = 4063;
filt_cal_lo = 59000;
filt_gain = 0x10; /* +3db, 6mhz on */
img_r = 0x00; /* image negative */
filt_q = 0x10; /* r10[4]:low q(1'b1) */
hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */
ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */
loop_through = 0x00; /* r5[7], lt on */
lt_att = 0x00; /* r31[7], lt att enable */
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
polyfil_cur = 0x60; /* r25[6:5]:min */
} else {
if (bw <= 6) {
if_khz = 3570;
filt_cal_lo = 56000; /* 52000->56000 */
filt_gain = 0x10; /* +3db, 6mhz on */
img_r = 0x00; /* image negative */
filt_q = 0x10; /* r10[4]:low q(1'b1) */
hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
loop_through = 0x00; /* r5[7], lt on */
lt_att = 0x00; /* r31[7], lt att enable */
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
polyfil_cur = 0x60; /* r25[6:5]:min */
} else if (bw == 7) {
#if 0
/*
* There are two 7 MHz tables defined on the original
* driver, but just the second one seems to be visible
* by rtl2832. Keep this one here commented, as it
* might be needed in the future
*/
if_khz = 4070;
filt_cal_lo = 60000;
filt_gain = 0x10; /* +3db, 6mhz on */
img_r = 0x00; /* image negative */
filt_q = 0x10; /* r10[4]:low q(1'b1) */
hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
loop_through = 0x00; /* r5[7], lt on */
lt_att = 0x00; /* r31[7], lt att enable */
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
polyfil_cur = 0x60; /* r25[6:5]:min */
#endif
/* 7 MHz, second table */
if_khz = 4570;
filt_cal_lo = 63000;
filt_gain = 0x10; /* +3db, 6mhz on */
img_r = 0x00; /* image negative */
filt_q = 0x10; /* r10[4]:low q(1'b1) */
hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
loop_through = 0x00; /* r5[7], lt on */
lt_att = 0x00; /* r31[7], lt att enable */
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
polyfil_cur = 0x60; /* r25[6:5]:min */
} else {
if_khz = 4570;
filt_cal_lo = 68500;
filt_gain = 0x10; /* +3db, 6mhz on */
img_r = 0x00; /* image negative */
filt_q = 0x10; /* r10[4]:low q(1'b1) */
hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */
ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */
loop_through = 0x00; /* r5[7], lt on */
lt_att = 0x00; /* r31[7], lt att enable */
flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */
polyfil_cur = 0x60; /* r25[6:5]:min */
}
}
/* Initialize the shadow registers */
memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
/* Init Flag & Xtal_check Result */
if (priv->imr_done)
val = 1 | priv->xtal_cap_sel << 1;
else
val = 0;
rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f);
if (rc < 0)
return rc;
/* version */
rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f);
if (rc < 0)
return rc;
/* for LT Gain test */
if (type != V4L2_TUNER_ANALOG_TV) {
rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38);
if (rc < 0)
return rc;
msleep(1);
}
priv->int_freq = if_khz * 1000;
/* Check if standard changed. If so, filter calibration is needed */
if (type != priv->type)
need_calibration = true;
else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std))
need_calibration = true;
else if ((type == V4L2_TUNER_DIGITAL_TV) &&
((delsys != priv->delsys) || bw != priv->bw))
need_calibration = true;
else
need_calibration = false;
if (need_calibration) {
tuner_dbg("calibrating the tuner\n");
for (i = 0; i < 2; i++) {
/* Set filt_cap */
rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60);
if (rc < 0)
return rc;
/* set cali clk =on */
rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04);
if (rc < 0)
return rc;
/* X'tal cap 0pF for PLL */
rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03);
if (rc < 0)
return rc;
rc = r820t_set_pll(priv, filt_cal_lo);
if (rc < 0 || !priv->has_lock)
return rc;
/* Start Trigger */
rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10);
if (rc < 0)
return rc;
msleep(1);
/* Stop Trigger */
rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10);
if (rc < 0)
return rc;
/* set cali clk =off */
rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04);
if (rc < 0)
return rc;
/* Check if calibration worked */
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
return rc;
priv->fil_cal_code = data[4] & 0x0f;
if (priv->fil_cal_code && priv->fil_cal_code != 0x0f)
break;
}
/* narrowest */
if (priv->fil_cal_code == 0x0f)
priv->fil_cal_code = 0;
}
rc = r820t_write_reg_mask(priv, 0x0a,
filt_q | priv->fil_cal_code, 0x1f);
if (rc < 0)
return rc;
/* Set BW, Filter_gain, & HP corner */
rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x10);
if (rc < 0)
return rc;
/* Set Img_R */
rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80);
if (rc < 0)
return rc;
/* Set filt_3dB, V6MHz */
rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30);
if (rc < 0)
return rc;
/* channel filter extension */
rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60);
if (rc < 0)
return rc;
/* Loop through */
rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80);
if (rc < 0)
return rc;
/* Loop through attenuation */
rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80);
if (rc < 0)
return rc;
/* filter extension widest */
rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80);
if (rc < 0)
return rc;
/* RF poly filter current */
rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60);
if (rc < 0)
return rc;
/* Store current standard. If it changes, re-calibrate the tuner */
priv->delsys = delsys;
priv->type = type;
priv->std = std;
priv->bw = bw;
return 0;
}
static int r820t_read_gain(struct r820t_priv *priv)
{
u8 data[4];
int rc;
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
return rc;
return ((data[3] & 0x0f) << 1) + ((data[3] & 0xf0) >> 4);
}
static int r820t_set_gain_mode(struct r820t_priv *priv,
bool set_manual_gain,
int gain)
{
int rc;
if (set_manual_gain) {
int i, total_gain = 0;
uint8_t mix_index = 0, lna_index = 0;
u8 data[4];
/* LNA auto off */
rc = r820t_write_reg_mask(priv, 0x05, 0x10, 0x10);
if (rc < 0)
return rc;
/* Mixer auto off */
rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10);
if (rc < 0)
return rc;
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
return rc;
/* set fixed VGA gain for now (16.3 dB) */
rc = r820t_write_reg_mask(priv, 0x0c, 0x08, 0x9f);
if (rc < 0)
return rc;
for (i = 0; i < 15; i++) {
if (total_gain >= gain)
break;
total_gain += r820t_lna_gain_steps[++lna_index];
if (total_gain >= gain)
break;
total_gain += r820t_mixer_gain_steps[++mix_index];
}
/* set LNA gain */
rc = r820t_write_reg_mask(priv, 0x05, lna_index, 0x0f);
if (rc < 0)
return rc;
/* set Mixer gain */
rc = r820t_write_reg_mask(priv, 0x07, mix_index, 0x0f);
if (rc < 0)
return rc;
} else {
/* LNA */
rc = r820t_write_reg_mask(priv, 0x05, 0, 0xef);
if (rc < 0)
return rc;
/* Mixer */
rc = r820t_write_reg_mask(priv, 0x07, 0x10, 0xef);
if (rc < 0)
return rc;
/* set fixed VGA gain for now (26.5 dB) */
rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f);
if (rc < 0)
return rc;
}
return 0;
}
static int generic_set_freq(struct dvb_frontend *fe,
u32 freq /* in HZ */,
unsigned bw,
enum v4l2_tuner_type type,
v4l2_std_id std, u32 delsys)
{
struct r820t_priv *priv = fe->tuner_priv;
int rc = -EINVAL;
u32 lo_freq;
tuner_dbg("should set frequency to %d kHz, bw %d MHz\n",
freq / 1000, bw);
rc = r820t_set_tv_standard(priv, bw, type, std, delsys);
if (rc < 0)
goto err;
if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC))
lo_freq = freq - priv->int_freq;
else
lo_freq = freq + priv->int_freq;
rc = r820t_set_mux(priv, lo_freq);
if (rc < 0)
goto err;
rc = r820t_set_gain_mode(priv, true, 0);
if (rc < 0)
goto err;
rc = r820t_set_pll(priv, lo_freq);
if (rc < 0 || !priv->has_lock)
goto err;
rc = r820t_sysfreq_sel(priv, freq, type, std, delsys);
if (rc < 0)
goto err;
tuner_dbg("%s: PLL locked on frequency %d Hz, gain=%d\n",
__func__, freq, r820t_read_gain(priv));
err:
if (rc < 0)
tuner_dbg("%s: failed=%d\n", __func__, rc);
return rc;
}
/*
* r820t standby logic
*/
static int r820t_standby(struct r820t_priv *priv)
{
int rc;
rc = r820t_write_reg(priv, 0x06, 0xb1);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x05, 0x03);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x07, 0x3a);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x08, 0x40);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x09, 0xc0);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x0a, 0x36);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x0c, 0x35);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x0f, 0x68);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x11, 0x03);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x17, 0xf4);
if (rc < 0)
return rc;
rc = r820t_write_reg(priv, 0x19, 0x0c);
/* Force initial calibration */
priv->type = -1;
return rc;
}
/*
* r820t device init logic
*/
static int r820t_xtal_check(struct r820t_priv *priv)
{
int rc, i;
u8 data[3], val;
/* Initialize the shadow registers */
memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
/* cap 30pF & Drive Low */
rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b);
if (rc < 0)
return rc;
/* set pll autotune = 128kHz */
rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c);
if (rc < 0)
return rc;
/* set manual initial reg = 111111; */
rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f);
if (rc < 0)
return rc;
/* set auto */
rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40);
if (rc < 0)
return rc;
/* Try several xtal capacitor alternatives */
for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) {
rc = r820t_write_reg_mask(priv, 0x10,
r820t_xtal_capacitor[i][0], 0x1b);
if (rc < 0)
return rc;
msleep(5);
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
return rc;
if ((!data[2]) & 0x40)
continue;
val = data[2] & 0x3f;
if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23))
break;
if (val != 0x3f)
break;
}
if (i == ARRAY_SIZE(r820t_xtal_capacitor))
return -EINVAL;
return r820t_xtal_capacitor[i][1];
}
/*
* r820t frontend operations and tuner attach code
*
* All driver locks and i2c control are only in this part of the code
*/
static int r820t_init(struct dvb_frontend *fe)
{
struct r820t_priv *priv = fe->tuner_priv;
int rc, i;
int xtal_cap = 0;
tuner_dbg("%s:\n", __func__);
mutex_lock(&priv->lock);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((priv->cfg->rafael_chip == CHIP_R820T) ||
(priv->cfg->rafael_chip == CHIP_R828S) ||
(priv->cfg->rafael_chip == CHIP_R820C)) {
priv->xtal_cap_sel = XTAL_HIGH_CAP_0P;
} else {
for (i = 0; i < 3; i++) {
rc = r820t_xtal_check(priv);
if (rc < 0)
goto err;
if (!i || rc > xtal_cap)
xtal_cap = rc;
}
priv->xtal_cap_sel = xtal_cap;
}
/* Initialize registers */
rc = r820t_write(priv, 0x05,
r820t_init_array, sizeof(r820t_init_array));
err:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&priv->lock);
if (rc < 0)
tuner_dbg("%s: failed=%d\n", __func__, rc);
return rc;
}
static int r820t_sleep(struct dvb_frontend *fe)
{
struct r820t_priv *priv = fe->tuner_priv;
int rc;
tuner_dbg("%s:\n", __func__);
mutex_lock(&priv->lock);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
rc = r820t_standby(priv);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&priv->lock);
tuner_dbg("%s: failed=%d\n", __func__, rc);
return rc;
}
static int r820t_set_analog_freq(struct dvb_frontend *fe,
struct analog_parameters *p)
{
struct r820t_priv *priv = fe->tuner_priv;
unsigned bw;
int rc;
tuner_dbg("%s called\n", __func__);
/* if std is not defined, choose one */
if (!p->std)
p->std = V4L2_STD_MN;
if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC))
bw = 6;
else
bw = 8;
mutex_lock(&priv->lock);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
rc = generic_set_freq(fe, 62500l * p->frequency, bw,
V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&priv->lock);
return rc;
}
static int r820t_set_params(struct dvb_frontend *fe)
{
struct r820t_priv *priv = fe->tuner_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int rc;
unsigned bw;
tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
__func__, c->delivery_system, c->frequency, c->bandwidth_hz);
mutex_lock(&priv->lock);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
bw = (c->bandwidth_hz + 500000) / 1000000;
if (!bw)
bw = 8;
rc = generic_set_freq(fe, c->frequency, bw,
V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&priv->lock);
if (rc)
tuner_dbg("%s: failed=%d\n", __func__, rc);
return rc;
}
static int r820t_signal(struct dvb_frontend *fe, u16 *strength)
{
struct r820t_priv *priv = fe->tuner_priv;
int rc = 0;
mutex_lock(&priv->lock);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (priv->has_lock) {
rc = r820t_read_gain(priv);
if (rc < 0)
goto err;
/* A higher gain at LNA means a lower signal strength */
*strength = (45 - rc) << 4 | 0xff;
} else {
*strength = 0;
}
err:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&priv->lock);
tuner_dbg("%s: %s, gain=%d strength=%d\n",
__func__,
priv->has_lock ? "PLL locked" : "no signal",
rc, *strength);
return 0;
}
static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct r820t_priv *priv = fe->tuner_priv;
tuner_dbg("%s:\n", __func__);
*frequency = priv->int_freq;
return 0;
}
static int r820t_release(struct dvb_frontend *fe)
{
struct r820t_priv *priv = fe->tuner_priv;
tuner_dbg("%s:\n", __func__);
mutex_lock(&r820t_list_mutex);
if (priv)
hybrid_tuner_release_state(priv);
mutex_unlock(&r820t_list_mutex);
fe->tuner_priv = NULL;
kfree(fe->tuner_priv);
return 0;
}
static const struct dvb_tuner_ops r820t_tuner_ops = {
.info = {
.name = "Rafael Micro R820T",
.frequency_min = 42000000,
.frequency_max = 1002000000,
},
.init = r820t_init,
.release = r820t_release,
.sleep = r820t_sleep,
.set_params = r820t_set_params,
.set_analog_params = r820t_set_analog_freq,
.get_if_frequency = r820t_get_if_frequency,
.get_rf_strength = r820t_signal,
};
struct dvb_frontend *r820t_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
const struct r820t_config *cfg)
{
struct r820t_priv *priv;
int rc = -ENODEV;
u8 data[5];
int instance;
mutex_lock(&r820t_list_mutex);
instance = hybrid_tuner_request_state(struct r820t_priv, priv,
hybrid_tuner_instance_list,
i2c, cfg->i2c_addr,
"r820t");
switch (instance) {
case 0:
/* memory allocation failure */
goto err_no_gate;
break;
case 1:
/* new tuner instance */
priv->cfg = cfg;
mutex_init(&priv->lock);
fe->tuner_priv = priv;
break;
case 2:
/* existing tuner instance */
fe->tuner_priv = priv;
break;
}
memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, sizeof(r820t_tuner_ops));
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
/* check if the tuner is there */
rc = r820_read(priv, 0x00, data, sizeof(data));
if (rc < 0)
goto err;
rc = r820t_sleep(fe);
if (rc < 0)
goto err;
tuner_info("Rafael Micro r820t successfully identified\n");
fe->tuner_priv = priv;
memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops,
sizeof(struct dvb_tuner_ops));
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
mutex_unlock(&r820t_list_mutex);
return fe;
err:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
err_no_gate:
mutex_unlock(&r820t_list_mutex);
tuner_info("%s: failed=%d\n", __func__, rc);
r820t_release(fe);
return NULL;
}
EXPORT_SYMBOL_GPL(r820t_attach);
MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");
