|
|
/*
* Copyright (c) 2004-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef HIF_H
#define HIF_H
#include "common.h"
#include "core.h"
#include <linux/scatterlist.h>
#define BUS_REQUEST_MAX_NUM 64
#define HIF_MBOX_BLOCK_SIZE 128
#define HIF_MBOX0_BLOCK_SIZE 1
#define HIF_DMA_BUFFER_SIZE (32 * 1024)
#define CMD53_FIXED_ADDRESS 1
#define CMD53_INCR_ADDRESS 2
#define MAX_SCATTER_REQUESTS 4
#define MAX_SCATTER_ENTRIES_PER_REQ 16
#define MAX_SCATTER_REQ_TRANSFER_SIZE (32 * 1024)
#define MANUFACTURER_ID_AR6003_BASE 0x300
/* SDIO manufacturer ID and Codes */
#define MANUFACTURER_ID_ATH6KL_BASE_MASK 0xFF00
#define MANUFACTURER_CODE 0x271 /* Atheros */
/* Mailbox address in SDIO address space */
#define HIF_MBOX_BASE_ADDR 0x800
#define HIF_MBOX_WIDTH 0x800
#define HIF_MBOX_END_ADDR (HTC_MAILBOX_NUM_MAX * HIF_MBOX_WIDTH - 1)
/* version 1 of the chip has only a 12K extended mbox range */
#define HIF_MBOX0_EXT_BASE_ADDR 0x4000
#define HIF_MBOX0_EXT_WIDTH (12*1024)
/* GMBOX addresses */
#define HIF_GMBOX_BASE_ADDR 0x7000
#define HIF_GMBOX_WIDTH 0x4000
/* interrupt mode register */
#define CCCR_SDIO_IRQ_MODE_REG 0xF0
/* mode to enable special 4-bit interrupt assertion without clock */
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ (1 << 0)
struct bus_request {
struct list_head list;
/* request data */
u32 address;
u8 *buffer;
u32 length;
u32 request;
struct htc_packet *packet;
int status;
/* this is a scatter request */
struct hif_scatter_req *scat_req;
};
/* direction of transfer (read/write) */
#define HIF_READ 0x00000001
#define HIF_WRITE 0x00000002
#define HIF_DIR_MASK (HIF_READ | HIF_WRITE)
/*
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
* implemented using the asynchronous mode allowing the the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
* transmit context or the ISR context in case of receive).
* Support for both of these modes is essential.
*/
#define HIF_SYNCHRONOUS 0x00000010
#define HIF_ASYNCHRONOUS 0x00000020
#define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
/*
* dmode - An interface may support different kinds of commands based on
* the tradeoff between the amount of data it can carry and the
* setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
* HIF_BLOCK_BASIS). In case of latter, the data is rounded off
* to the nearest block size by padding. The size of the block is
* configurable at compile time using the HIF_BLOCK_SIZE and is
* negotiated with the target during initialization after the
* ATH6KL interrupts are enabled.
*/
#define HIF_BYTE_BASIS 0x00000040
#define HIF_BLOCK_BASIS 0x00000080
#define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
/*
* amode - This indicates if the address has to be incremented on ATH6KL
* after every read/write operation (HIF?FIXED_ADDRESS/
* HIF_INCREMENTAL_ADDRESS).
*/
#define HIF_FIXED_ADDRESS 0x00000100
#define HIF_INCREMENTAL_ADDRESS 0x00000200
#define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_ASYNC_BYTE_INC \
(HIF_WRITE | HIF_ASYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_ASYNC_BLOCK_INC \
(HIF_WRITE | HIF_ASYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_SYNC_BYTE_FIX \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
#define HIF_WR_SYNC_BYTE_INC \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_SYNC_BLOCK_INC \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_RD_SYNC_BYTE_INC \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_RD_SYNC_BYTE_FIX \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
#define HIF_RD_ASYNC_BLOCK_FIX \
(HIF_READ | HIF_ASYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
#define HIF_RD_SYNC_BLOCK_FIX \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
struct hif_scatter_item {
u8 *buf;
int len;
struct htc_packet *packet;
};
struct hif_scatter_req {
struct list_head list;
/* address for the read/write operation */
u32 addr;
/* request flags */
u32 req;
/* total length of entire transfer */
u32 len;
bool virt_scat;
void (*complete) (struct htc_target *, struct hif_scatter_req *);
int status;
int scat_entries;
struct bus_request *busrequest;
struct scatterlist *sgentries;
/* bounce buffer for upper layers to copy to/from */
u8 *virt_dma_buf;
struct hif_scatter_item scat_list[1];
};
struct ath6kl_hif_ops {
int (*read_write_sync)(struct ath6kl *ar, u32 addr, u8 *buf,
u32 len, u32 request);
int (*write_async)(struct ath6kl *ar, u32 address, u8 *buffer,
u32 length, u32 request, struct htc_packet *packet);
void (*irq_enable)(struct ath6kl *ar);
void (*irq_disable)(struct ath6kl *ar);
struct hif_scatter_req *(*scatter_req_get)(struct ath6kl *ar);
void (*scatter_req_add)(struct ath6kl *ar,
struct hif_scatter_req *s_req);
int (*enable_scatter)(struct ath6kl *ar);
int (*scat_req_rw) (struct ath6kl *ar,
struct hif_scatter_req *scat_req);
void (*cleanup_scatter)(struct ath6kl *ar);
int (*suspend)(struct ath6kl *ar);
};
#endif
|
