/*
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
*
* Copyright (C) 2013 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/act8865.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
/*
* ACT8865 Global Register Map.
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
/*
* Field Definitions.
*/
#define ACT8865_ENA 0x80 /* ON - [7] */
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
/*
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
struct act8865 {
struct regulator_dev *rdev[ACT8865_REG_NUM];
struct regmap *regmap;
};
static const struct regmap_config act8865_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static const struct regulator_linear_range act8865_volatge_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
static struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc act8865_reg[] = {
{
.name = "DCDC_REG1",
.id = ACT8865_ID_DCDC1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC1_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG2",
.id = ACT8865_ID_DCDC2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC2_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG3",
.id = ACT8865_ID_DCDC3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC3_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG1",
.id = ACT8865_ID_LDO1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO1_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG2",
.id = ACT8865_ID_LDO2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO2_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG3",
.id = ACT8865_ID_LDO3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO3_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG4",
.id = ACT8865_ID_LDO4,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO4_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO4_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8865" },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
static struct of_regulator_match act8865_matches[] = {
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
[ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
[ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
[ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
[ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
};
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
int matched, i;
struct device_node *np;
struct act8865_regulator_data *regulator;
np = of_find_node_by_name(dev->of_node, "regulators");
if (!np) {
dev_err(dev, "missing 'regulators' subnode in DT\n");
return -EINVAL;
}
matched = of_regulator_match(dev, np,
act8865_matches, ARRAY_SIZE(act8865_matches));
if (matched <= 0)
return matched;
pdata->regulators = devm_kzalloc(dev,
sizeof(struct act8865_regulator_data) *
ARRAY_SIZE(act8865_matches), GFP_KERNEL);
if (!pdata->regulators) {
dev_err(dev, "%s: failed to allocate act8865 registor\n",
__func__);
return -ENOMEM;
}
pdata->num_regulators = matched;
regulator = pdata->regulators;
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
regulator->id = i;
regulator->name = act8865_matches[i].name;
regulator->platform_data = act8865_matches[i].init_data;
of_node[i] = act8865_matches[i].of_node;
regulator++;
}
return 0;
}
#else
static inline int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
return 0;
}
#endif
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct regulator_dev **rdev;
struct device *dev = &client->dev;
struct act8865_platform_data *pdata = dev_get_platdata(dev);
struct regulator_config config = { };
struct act8865 *act8865;
struct device_node *of_node[ACT8865_REG_NUM];
int i, id;
int ret = -EINVAL;
int error;
if (dev->of_node && !pdata) {
const struct of_device_id *id;
struct act8865_platform_data pdata_of;
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
if (!id)
return -ENODEV;
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
if (pdata->num_regulators > ACT8865_REG_NUM) {
dev_err(dev, "Too many regulators found!\n");
return -EINVAL;
}
act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
if (!act8865)
return -ENOMEM;
rdev = act8865->rdev;
act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
if (IS_ERR(act8865->regmap)) {
error = PTR_ERR(act8865->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
/* Finally register devices */
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
id = pdata->regulators[i].id;
config.dev = dev;
config.init_data = pdata->regulators[i].platform_data;
config.of_node = of_node[i];
config.driver_data = act8865;
config.regmap = act8865->regmap;
rdev[i] = devm_regulator_register(&client->dev,
&act8865_reg[i], &config);
if (IS_ERR(rdev[i])) {
dev_err(dev, "failed to register %s\n",
act8865_reg[id].name);
return PTR_ERR(rdev[i]);
}
}
i2c_set_clientdata(client, act8865);
return 0;
}
static const struct i2c_device_id act8865_ids[] = {
{ "act8865", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, act8865_ids);
static struct i2c_driver act8865_pmic_driver = {
.driver = {
.name = "act8865",
.owner = THIS_MODULE,
},
.probe = act8865_pmic_probe,
.id_table = act8865_ids,
};
module_i2c_driver(act8865_pmic_driver);
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
MODULE_LICENSE("GPL v2");
