// SPDX-License-Identifier: GPL-2.0+
/*
* FB driver for the ST7735R LCD Controller
*
* Copyright (C) 2013 Noralf Tronnes
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <video/mipi_display.h>
#include "fbtft.h"
#define DRVNAME "fb_st7735r"
#define DEFAULT_GAMMA "0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10\n" \
"0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10"
static const s16 default_init_sequence[] = {
-1, MIPI_DCS_SOFT_RESET,
-2, 150, /* delay */
-1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 500, /* delay */
/* FRMCTR1 - frame rate control: normal mode
* frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D)
*/
-1, 0xB1, 0x01, 0x2C, 0x2D,
/* FRMCTR2 - frame rate control: idle mode
* frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D)
*/
-1, 0xB2, 0x01, 0x2C, 0x2D,
/* FRMCTR3 - frame rate control - partial mode
* dot inversion mode, line inversion mode
*/
-1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
/* INVCTR - display inversion control
* no inversion
*/
-1, 0xB4, 0x07,
/* PWCTR1 - Power Control
* -4.6V, AUTO mode
*/
-1, 0xC0, 0xA2, 0x02, 0x84,
/* PWCTR2 - Power Control
* VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
*/
-1, 0xC1, 0xC5,
/* PWCTR3 - Power Control
* Opamp current small, Boost frequency
*/
-1, 0xC2, 0x0A, 0x00,
/* PWCTR4 - Power Control
* BCLK/2, Opamp current small & Medium low
*/
-1, 0xC3, 0x8A, 0x2A,
/* PWCTR5 - Power Control */
-1, 0xC4, 0x8A, 0xEE,
/* VMCTR1 - Power Control */
-1, 0xC5, 0x0E,
-1, MIPI_DCS_EXIT_INVERT_MODE,
-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
-1, MIPI_DCS_SET_DISPLAY_ON,
-2, 100, /* delay */
-1, MIPI_DCS_ENTER_NORMAL_MODE,
-2, 10, /* delay */
/* end marker */
-3
};
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
#define MY BIT(7)
#define MX BIT(6)
#define MV BIT(5)
static int set_var(struct fbtft_par *par)
{
/* MADCTL - Memory data access control
* RGB/BGR:
* 1. Mode selection pin SRGB
* RGB H/W pin for color filter setting: 0=RGB, 1=BGR
* 2. MADCTL RGB bit
* RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR
*/
switch (par->info->var.rotate) {
case 0:
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
MX | MY | (par->bgr << 3));
break;
case 270:
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
MY | MV | (par->bgr << 3));
break;
case 180:
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
par->bgr << 3);
break;
case 90:
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
MX | MV | (par->bgr << 3));
break;
}
return 0;
}
/*
* Gamma string format:
* VRF0P VOS0P PK0P PK1P PK2P PK3P PK4P PK5P PK6P PK7P PK8P PK9P SELV0P SELV1P SELV62P SELV63P
* VRF0N VOS0N PK0N PK1N PK2N PK3N PK4N PK5N PK6N PK7N PK8N PK9N SELV0N SELV1N SELV62N SELV63N
*/
#define CURVE(num, idx) curves[num * par->gamma.num_values + idx]
static int set_gamma(struct fbtft_par *par, u32 *curves)
{
int i, j;
/* apply mask */
for (i = 0; i < par->gamma.num_curves; i++)
for (j = 0; j < par->gamma.num_values; j++)
CURVE(i, j) &= 0x3f;
for (i = 0; i < par->gamma.num_curves; i++)
write_reg(par, 0xE0 + i,
CURVE(i, 0), CURVE(i, 1), CURVE(i, 2), CURVE(i, 3),
CURVE(i, 4), CURVE(i, 5), CURVE(i, 6), CURVE(i, 7),
CURVE(i, 8), CURVE(i, 9), CURVE(i, 10), CURVE(i, 11),
CURVE(i, 12), CURVE(i, 13), CURVE(i, 14), CURVE(i, 15));
return 0;
}
#undef CURVE
static struct fbtft_display display = {
.regwidth = 8,
.width = 128,
.height = 160,
.init_sequence = default_init_sequence,
.gamma_num = 2,
.gamma_len = 16,
.gamma = DEFAULT_GAMMA,
.fbtftops = {
.set_addr_win = set_addr_win,
.set_var = set_var,
.set_gamma = set_gamma,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "sitronix,st7735r", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:st7735r");
MODULE_ALIAS("platform:st7735r");
MODULE_DESCRIPTION("FB driver for the ST7735R LCD Controller");
MODULE_AUTHOR("Noralf Tronnes");
MODULE_LICENSE("GPL");