/*
* Copyright © 2006-2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include "framebuffer.h"
#include "psb_intel_display.h"
#include "mdfld_dsi_dbi.h"
#include "mdfld_dsi_dpi.h"
//#include "mdfld_dsi_output.h"
#ifdef CONFIG_MDFLD_DSI_DPU
#include "mdfld_dsi_dbi_dpu.h"
#endif
#include <linux/pm_runtime.h>
#ifdef MIN
#undef MIN
#endif
#define MIN(x, y) (((x) < (y)) ? (x) : (y))
/* Hardcoded currently */
static int ksel = KSEL_CRYSTAL_19;
extern void mdfld_save_display(struct drm_device *dev);
extern bool gbgfxsuspended;
struct psb_intel_range_t {
int min, max;
};
struct mdfld_limit_t {
struct psb_intel_range_t dot, m, p1;
};
struct mdfld_intel_clock_t {
/* given values */
int n;
int m1, m2;
int p1, p2;
/* derived values */
int dot;
int vco;
int m;
int p;
};
#define COUNT_MAX 0x10000000
void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
{
int count, temp;
u32 pipeconf_reg = PIPEACONF;
switch (pipe) {
case 0:
break;
case 1:
pipeconf_reg = PIPEBCONF;
break;
case 2:
pipeconf_reg = PIPECCONF;
break;
default:
DRM_ERROR("Illegal Pipe Number. \n");
return;
}
/* FIXME JLIU7_PO */
psb_intel_wait_for_vblank(dev);
return;
/* Wait for for the pipe disable to take effect. */
for (count = 0; count < COUNT_MAX; count++) {
temp = REG_READ(pipeconf_reg);
if ((temp & PIPEACONF_PIPE_STATE) == 0)
break;
}
}
void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
{
int count, temp;
u32 pipeconf_reg = PIPEACONF;
switch (pipe) {
case 0:
break;
case 1:
pipeconf_reg = PIPEBCONF;
break;
case 2:
pipeconf_reg = PIPECCONF;
break;
default:
dev_err(dev->dev, "Illegal Pipe Number.\n");
return;
}
/* FIXME JLIU7_PO */
psb_intel_wait_for_vblank(dev);
return;
/* Wait for for the pipe enable to take effect. */
for (count = 0; count < COUNT_MAX; count++) {
temp = REG_READ(pipeconf_reg);
if ((temp & PIPEACONF_PIPE_STATE) == 1)
break;
}
}
static int mdfld_intel_crtc_cursor_set(struct drm_crtc *crtc,
struct drm_file *file_priv,
uint32_t handle,
uint32_t width, uint32_t height)
{
struct drm_device *dev = crtc->dev;
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
int pipe = psb_intel_crtc->pipe;
uint32_t control = CURACNTR;
uint32_t base = CURABASE;
uint32_t temp;
size_t addr = 0;
struct gtt_range *gt;
struct drm_gem_object *obj;
int ret;
switch (pipe) {
case 0:
break;
case 1:
control = CURBCNTR;
base = CURBBASE;
break;
case 2:
control = CURCCNTR;
base = CURCBASE;
break;
default:
dev_err(dev->dev, "Illegal Pipe Number. \n");
return -EINVAL;
}
#if 1 /* FIXME_JLIU7 can't enalbe cursorB/C HW issue. need to remove after HW fix */
if (pipe != 0)
return 0;
#endif
/* if we want to turn of the cursor ignore width and height */
if (!handle) {
dev_dbg(dev->dev, "cursor off\n");
/* turn off the cursor */
temp = 0;
temp |= CURSOR_MODE_DISABLE;
if (gma_power_begin(dev, true)) {
REG_WRITE(control, temp);
REG_WRITE(base, 0);
gma_power_end(dev);
}
/* Unpin the old GEM object */
if (psb_intel_crtc->cursor_obj) {
gt = container_of(psb_intel_crtc->cursor_obj,
struct gtt_range, gem);
psb_gtt_unpin(gt);
drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
psb_intel_crtc->cursor_obj = NULL;
}
return 0;
}
/* Currently we only support 64x64 cursors */
if (width != 64 || height != 64) {
DRM_ERROR("we currently only support 64x64 cursors\n");
return -EINVAL;
}
obj = drm_gem_object_lookup(dev, file_priv, handle);
if (!obj)
return -ENOENT;
if (obj->size < width * height * 4) {
dev_dbg(dev->dev, "buffer is to small\n");
return -ENOMEM;
}
gt = container_of(obj, struct gtt_range, gem);
/* Pin the memory into the GTT */
ret = psb_gtt_pin(gt);
if (ret) {
dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
return ret;
}
addr = gt->offset; /* Or resource.start ??? */
psb_intel_crtc->cursor_addr = addr;
temp = 0;
/* set the pipe for the cursor */
temp |= (pipe << 28);
temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
if (gma_power_begin(dev, true)) {
REG_WRITE(control, temp);
REG_WRITE(base, addr);
gma_power_end(dev);
}
#if 0
/* FIXME: COnvert to GEM */
/* unpin the old bo */
if (psb_intel_crtc->cursor_bo && psb_intel_crtc->cursor_bo != bo) {
mode_dev->bo_unpin_for_scanout(dev, psb_intel_crtc->cursor_bo);
psb_intel_crtc->cursor_bo = bo;
}
#endif
return 0;
}
static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
{
struct drm_device *dev = crtc->dev;
#ifndef CONFIG_MDFLD_DSI_DPU
struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private;
#else
struct psb_drm_dpu_rect rect;
#endif
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
int pipe = psb_intel_crtc->pipe;
uint32_t pos = CURAPOS;
uint32_t base = CURABASE;
uint32_t temp = 0;
uint32_t addr;
switch (pipe) {
case 0:
#ifndef CONFIG_MDFLD_DSI_DPU
if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_0))
mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_0);
#else /*CONFIG_MDFLD_DSI_DPU*/
rect.x = x;
rect.y = y;
mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORA, &rect);
mdfld_dpu_exit_dsr(dev);
#endif
break;
case 1:
pos = CURBPOS;
base = CURBBASE;
break;
case 2:
#ifndef CONFIG_MDFLD_DSI_DPU
if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_2))
mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_2);
#else /*CONFIG_MDFLD_DSI_DPU*/
mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORC, &rect);
mdfld_dpu_exit_dsr(dev);
#endif
pos = CURCPOS;
base = CURCBASE;
break;
default:
DRM_ERROR("Illegal Pipe Number. \n");
return -EINVAL;
}
#if 1 /* FIXME_JLIU7 can't enalbe cursorB/C HW issue. need to remove after HW fix */
if (pipe != 0)
return 0;
#endif
if (x < 0) {
temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
x = -x;
}
if (y < 0) {
temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
y = -y;
}
temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
addr = psb_intel_crtc->cursor_addr;
if (gma_power_begin(dev, true)) {
REG_WRITE(pos, temp);
REG_WRITE(base, addr);
gma_power_end(dev);
}
return 0;
}
const struct drm_crtc_funcs mdfld_intel_crtc_funcs = {
.cursor_set = mdfld_intel_crtc_cursor_set,
.cursor_move = mdfld_intel_crtc_cursor_move,
.gamma_set = psb_intel_crtc_gamma_set,
.set_config = drm_crtc_helper_set_config,
.destroy = psb_intel_crtc_destroy,
};
static struct drm_device globle_dev;
void mdfld__intel_plane_set_alpha(int enable)
{
struct drm_device *dev = &globle_dev;
int dspcntr_reg = DSPACNTR;
u32 dspcntr;
dspcntr = REG_READ(dspcntr_reg);
if (enable) {
dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA;
dspcntr |= DISPPLANE_32BPP;
} else {
dspcntr &= ~DISPPLANE_32BPP;
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
}
REG_WRITE(dspcntr_reg, dspcntr);
}
int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
/* struct drm_i915_master_private *master_priv; */
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
int pipe = psb_intel_crtc->pipe;
unsigned long start, offset;
int dsplinoff = DSPALINOFF;
int dspsurf = DSPASURF;
int dspstride = DSPASTRIDE;
int dspcntr_reg = DSPACNTR;
u32 dspcntr;
int ret = 0;
memcpy(&globle_dev, dev, sizeof(struct drm_device));
if (!gma_power_begin(dev, true))
return 0;
/* no fb bound */
if (!crtc->fb) {
dev_err(dev->dev, "No FB bound\n");
goto psb_intel_pipe_cleaner;
}
switch (pipe) {
case 0:
dsplinoff = DSPALINOFF;
break;
case 1:
dsplinoff = DSPBLINOFF;
dspsurf = DSPBSURF;
dspstride = DSPBSTRIDE;
dspcntr_reg = DSPBCNTR;
break;
case 2:
dsplinoff = DSPCLINOFF;
dspsurf = DSPCSURF;
dspstride = DSPCSTRIDE;
dspcntr_reg = DSPCCNTR;
break;
default:
dev_err(dev->dev, "Illegal Pipe Number.\n");
return -EINVAL;
}
ret = psb_gtt_pin(psbfb->gtt);
if (ret < 0)
goto psb_intel_pipe_set_base_exit;
start = psbfb->gtt->offset;
offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
REG_WRITE(dspstride, crtc->fb->pitch);
dspcntr = REG_READ(dspcntr_reg);
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
switch (crtc->fb->bits_per_pixel) {
case 8:
dspcntr |= DISPPLANE_8BPP;
break;
case 16:
if (crtc->fb->depth == 15)
dspcntr |= DISPPLANE_15_16BPP;
else
dspcntr |= DISPPLANE_16BPP;
break;
case 24:
case 32:
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
break;
default:
dev_err(dev->dev, "Unknown color depth\n");
ret = -EINVAL;
goto psb_intel_pipe_set_base_exit;
}
REG_WRITE(dspcntr_reg, dspcntr);
dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n",
start, offset, x, y);
REG_WRITE(dsplinoff, offset);
REG_READ(dsplinoff);
REG_WRITE(dspsurf, start);
REG_READ(dspsurf);
psb_intel_pipe_cleaner:
/* If there was a previous display we can now unpin it */
if (old_fb)
psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
psb_intel_pipe_set_base_exit:
gma_power_end(dev);
return ret;
}
/**
* Disable the pipe, plane and pll.
*
*/
void mdfld_disable_crtc (struct drm_device *dev, int pipe)
{
int dpll_reg = MRST_DPLL_A;
int dspcntr_reg = DSPACNTR;
int dspbase_reg = MRST_DSPABASE;
int pipeconf_reg = PIPEACONF;
u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
u32 temp;
switch (pipe) {
case 0:
break;
case 1:
dpll_reg = MDFLD_DPLL_B;
dspcntr_reg = DSPBCNTR;
dspbase_reg = DSPBSURF;
pipeconf_reg = PIPEBCONF;
break;
case 2:
dpll_reg = MRST_DPLL_A;
dspcntr_reg = DSPCCNTR;
dspbase_reg = MDFLD_DSPCBASE;
pipeconf_reg = PIPECCONF;
gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET;
break;
default:
dev_err(dev->dev, "Illegal Pipe Number. \n");
return;
}
if (pipe != 1)
mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
/* Disable display plane */
temp = REG_READ(dspcntr_reg);
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
REG_WRITE(dspcntr_reg,
temp & ~DISPLAY_PLANE_ENABLE);
/* Flush the plane changes */
REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
REG_READ(dspbase_reg);
}
/* FIXME_JLIU7 MDFLD_PO revisit */
/* Wait for vblank for the disable to take effect */
// MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev);
/* Next, disable display pipes */
temp = REG_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
temp &= ~PIPEACONF_ENABLE;
temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
REG_WRITE(pipeconf_reg, temp);
REG_READ(pipeconf_reg);
/* Wait for for the pipe disable to take effect. */
mdfldWaitForPipeDisable(dev, pipe);
}
temp = REG_READ(dpll_reg);
if (temp & DPLL_VCO_ENABLE) {
if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
|| (pipe == 1)){
temp &= ~(DPLL_VCO_ENABLE);
REG_WRITE(dpll_reg, temp);
REG_READ(dpll_reg);
/* Wait for the clocks to turn off. */
/* FIXME_MDFLD PO may need more delay */
udelay(500);
if (!(temp & MDFLD_PWR_GATE_EN)) {
/* gating power of DPLL */
REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(5000);
}
}
}
}
/**
* Sets the power management mode of the pipe and plane.
*
* This code should probably grow support for turning the cursor off and back
* on appropriately at the same time as we're turning the pipe off/on.
*/
static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
int pipe = psb_intel_crtc->pipe;
int dpll_reg = MRST_DPLL_A;
int dspcntr_reg = DSPACNTR;
int dspbase_reg = MRST_DSPABASE;
int pipeconf_reg = PIPEACONF;
u32 pipestat_reg = PIPEASTAT;
u32 gen_fifo_stat_reg = GEN_FIFO_STAT_REG;
u32 pipeconf = dev_priv->pipeconf;
u32 dspcntr = dev_priv->dspcntr;
u32 mipi_enable_reg = MIPIA_DEVICE_READY_REG;
u32 temp;
bool enabled;
int timeout = 0;
if (!gma_power_begin(dev, true))
return;
/* Ignore if system is already in DSR and in suspended state. */
if(/*gbgfxsuspended */0 && dev_priv->dispstatus == false && mode == 3){
if(dev_priv->rpm_enabled && pipe == 1){
// dev_priv->is_mipi_on = false;
pm_request_idle(&dev->pdev->dev);
}
return;
}else if(mode == 0) {
//do not need to set gbdispstatus=true in crtc.
//this will be set in encoder such as mdfld_dsi_dbi_dpms
//gbdispstatus = true;
}
/* FIXME_JLIU7 MDFLD_PO replaced w/ the following function */
/* mdfld_dbi_dpms (struct drm_device *dev, int pipe, bool enabled) */
switch (pipe) {
case 0:
break;
case 1:
dpll_reg = DPLL_B;
dspcntr_reg = DSPBCNTR;
dspbase_reg = MRST_DSPBBASE;
pipeconf_reg = PIPEBCONF;
pipeconf = dev_priv->pipeconf1;
dspcntr = dev_priv->dspcntr1;
dpll_reg = MDFLD_DPLL_B;
break;
case 2:
dpll_reg = MRST_DPLL_A;
dspcntr_reg = DSPCCNTR;
dspbase_reg = MDFLD_DSPCBASE;
pipeconf_reg = PIPECCONF;
pipestat_reg = PIPECSTAT;
pipeconf = dev_priv->pipeconf2;
dspcntr = dev_priv->dspcntr2;
gen_fifo_stat_reg = GEN_FIFO_STAT_REG + MIPIC_REG_OFFSET;
mipi_enable_reg = MIPIA_DEVICE_READY_REG + MIPIC_REG_OFFSET;
break;
default:
dev_err(dev->dev, "Illegal Pipe Number.\n");
return;
}
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
*/
switch (mode) {
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
/* Enable the DPLL */
temp = REG_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
/* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
if (temp & MDFLD_PWR_GATE_EN) {
temp &= ~MDFLD_PWR_GATE_EN;
REG_WRITE(dpll_reg, temp);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
}
REG_WRITE(dpll_reg, temp);
REG_READ(dpll_reg);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
REG_READ(dpll_reg);
/**
* wait for DSI PLL to lock
* NOTE: only need to poll status of pipe 0 and pipe 1,
* since both MIPI pipes share the same PLL.
*/
while ((pipe != 2) && (timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
udelay(150);
timeout ++;
}
}
/* Enable the plane */
temp = REG_READ(dspcntr_reg);
if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
REG_WRITE(dspcntr_reg,
temp | DISPLAY_PLANE_ENABLE);
/* Flush the plane changes */
REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
}
/* Enable the pipe */
temp = REG_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) == 0) {
REG_WRITE(pipeconf_reg, pipeconf);
/* Wait for for the pipe enable to take effect. */
mdfldWaitForPipeEnable(dev, pipe);
}
/*workaround for sighting 3741701 Random X blank display*/
/*perform w/a in video mode only on pipe A or C*/
if ((pipe == 0 || pipe == 2) &&
(mdfld_panel_dpi(dev) == true)) {
REG_WRITE(pipestat_reg, REG_READ(pipestat_reg));
msleep(100);
if(PIPE_VBLANK_STATUS & REG_READ(pipestat_reg)) {
printk(KERN_ALERT "OK");
} else {
printk(KERN_ALERT "STUCK!!!!");
/*shutdown controller*/
temp = REG_READ(dspcntr_reg);
REG_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
/*mdfld_dsi_dpi_shut_down(dev, pipe);*/
REG_WRITE(0xb048, 1);
msleep(100);
temp = REG_READ(pipeconf_reg);
temp &= ~PIPEACONF_ENABLE;
REG_WRITE(pipeconf_reg, temp);
msleep(100); /*wait for pipe disable*/
/*printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008));
printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074));*/
REG_WRITE(mipi_enable_reg, 0);
msleep(100);
printk(KERN_ALERT "70008 is %x\n", REG_READ(0x70008));
printk(KERN_ALERT "b074 is %x\n", REG_READ(0xb074));
REG_WRITE(0xb004, REG_READ(0xb004));
/* try to bring the controller back up again*/
REG_WRITE(mipi_enable_reg, 1);
temp = REG_READ(dspcntr_reg);
REG_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
/*mdfld_dsi_dpi_turn_on(dev, pipe);*/
REG_WRITE(0xb048, 2);
msleep(100);
temp = REG_READ(pipeconf_reg);
temp |= PIPEACONF_ENABLE;
REG_WRITE(pipeconf_reg, temp);
}
}
psb_intel_crtc_load_lut(crtc);
/* Give the overlay scaler a chance to enable
if it's on this pipe */
/* psb_intel_crtc_dpms_video(crtc, true); TODO */
break;
case DRM_MODE_DPMS_OFF:
/* Give the overlay scaler a chance to disable
* if it's on this pipe */
/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
if (pipe != 1)
mdfld_dsi_gen_fifo_ready (dev, gen_fifo_stat_reg, HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
/* Disable the VGA plane that we never use */
REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
/* Disable display plane */
temp = REG_READ(dspcntr_reg);
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
REG_WRITE(dspcntr_reg,
temp & ~DISPLAY_PLANE_ENABLE);
/* Flush the plane changes */
REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
REG_READ(dspbase_reg);
}
/* FIXME_JLIU7 MDFLD_PO revisit */
/* Wait for vblank for the disable to take effect */
// MDFLD_PO_JLIU7 psb_intel_wait_for_vblank(dev);
/* Next, disable display pipes */
temp = REG_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
temp &= ~PIPEACONF_ENABLE;
temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
REG_WRITE(pipeconf_reg, temp);
// REG_WRITE(pipeconf_reg, 0);
REG_READ(pipeconf_reg);
/* Wait for for the pipe disable to take effect. */
mdfldWaitForPipeDisable(dev, pipe);
}
temp = REG_READ(dpll_reg);
if (temp & DPLL_VCO_ENABLE) {
if (((pipe != 1) && !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
|| (pipe == 1)){
temp &= ~(DPLL_VCO_ENABLE);
REG_WRITE(dpll_reg, temp);
REG_READ(dpll_reg);
/* Wait for the clocks to turn off. */
/* FIXME_MDFLD PO may need more delay */
udelay(500);
#if 0 /* MDFLD_PO_JLIU7 */
if (!(temp & MDFLD_PWR_GATE_EN)) {
/* gating power of DPLL */
REG_WRITE(dpll_reg, temp | MDFLD_PWR_GATE_EN);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(5000);
}
#endif /* MDFLD_PO_JLIU7 */
}
}
break;
}
enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
#if 0 /* JB: Add vblank support later */
if (enabled)
dev_priv->vblank_pipe |= (1 << pipe);
else
dev_priv->vblank_pipe &= ~(1 << pipe);
#endif
gma_power_end(dev);
}
#define MDFLD_LIMT_DPLL_19 0
#define MDFLD_LIMT_DPLL_25 1
#define MDFLD_LIMT_DPLL_83 2
#define MDFLD_LIMT_DPLL_100 3
#define MDFLD_LIMT_DSIPLL_19 4
#define MDFLD_LIMT_DSIPLL_25 5
#define MDFLD_LIMT_DSIPLL_83 6
#define MDFLD_LIMT_DSIPLL_100 7
#define MDFLD_DOT_MIN 19750 /* FIXME_MDFLD JLIU7 need to find out min & max for MDFLD */
#define MDFLD_DOT_MAX 120000
#define MDFLD_DPLL_M_MIN_19 113
#define MDFLD_DPLL_M_MAX_19 155
#define MDFLD_DPLL_P1_MIN_19 2
#define MDFLD_DPLL_P1_MAX_19 10
#define MDFLD_DPLL_M_MIN_25 101
#define MDFLD_DPLL_M_MAX_25 130
#define MDFLD_DPLL_P1_MIN_25 2
#define MDFLD_DPLL_P1_MAX_25 10
#define MDFLD_DPLL_M_MIN_83 64
#define MDFLD_DPLL_M_MAX_83 64
#define MDFLD_DPLL_P1_MIN_83 2
#define MDFLD_DPLL_P1_MAX_83 2
#define MDFLD_DPLL_M_MIN_100 64
#define MDFLD_DPLL_M_MAX_100 64
#define MDFLD_DPLL_P1_MIN_100 2
#define MDFLD_DPLL_P1_MAX_100 2
#define MDFLD_DSIPLL_M_MIN_19 131
#define MDFLD_DSIPLL_M_MAX_19 175
#define MDFLD_DSIPLL_P1_MIN_19 3
#define MDFLD_DSIPLL_P1_MAX_19 8
#define MDFLD_DSIPLL_M_MIN_25 97
#define MDFLD_DSIPLL_M_MAX_25 140
#define MDFLD_DSIPLL_P1_MIN_25 3
#define MDFLD_DSIPLL_P1_MAX_25 9
#define MDFLD_DSIPLL_M_MIN_83 33
#define MDFLD_DSIPLL_M_MAX_83 92
#define MDFLD_DSIPLL_P1_MIN_83 2
#define MDFLD_DSIPLL_P1_MAX_83 3
#define MDFLD_DSIPLL_M_MIN_100 97
#define MDFLD_DSIPLL_M_MAX_100 140
#define MDFLD_DSIPLL_P1_MIN_100 3
#define MDFLD_DSIPLL_P1_MAX_100 9
static const struct mdfld_limit_t mdfld_limits[] = {
{ /* MDFLD_LIMT_DPLL_19 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19},
.p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19},
},
{ /* MDFLD_LIMT_DPLL_25 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25},
.p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25},
},
{ /* MDFLD_LIMT_DPLL_83 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83},
.p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83},
},
{ /* MDFLD_LIMT_DPLL_100 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100},
.p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100},
},
{ /* MDFLD_LIMT_DSIPLL_19 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19},
.p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19},
},
{ /* MDFLD_LIMT_DSIPLL_25 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25},
.p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25},
},
{ /* MDFLD_LIMT_DSIPLL_83 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83},
.p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83},
},
{ /* MDFLD_LIMT_DSIPLL_100 */
.dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
.m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100},
.p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100},
},
};
#define MDFLD_M_MIN 21
#define MDFLD_M_MAX 180
static const u32 mdfld_m_converts[] = {
/* M configuration table from 9-bit LFSR table */
224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */
173, 342, 171, 85, 298, 149, 74, 37, 18, 265, /* 31 - 40 */
388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */
83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */
341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */
461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */
253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */
478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */
477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */
210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */
145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */
380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */
103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */
396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */
};
static const struct mdfld_limit_t *mdfld_limit(struct drm_crtc *crtc)
{
const struct mdfld_limit_t *limit = NULL;
struct drm_device *dev = crtc->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)
|| psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) {
if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19];
else if (ksel == KSEL_BYPASS_25)
limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25];
else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166))
limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83];
else if ((ksel == KSEL_BYPASS_83_100) &&
(dev_priv->core_freq == 100 || dev_priv->core_freq == 200))
limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100];
} else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
limit = &mdfld_limits[MDFLD_LIMT_DPLL_19];
else if (ksel == KSEL_BYPASS_25)
limit = &mdfld_limits[MDFLD_LIMT_DPLL_25];
else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166))
limit = &mdfld_limits[MDFLD_LIMT_DPLL_83];
else if ((ksel == KSEL_BYPASS_83_100) &&
(dev_priv->core_freq == 100 || dev_priv->core_freq == 200))
limit = &mdfld_limits[MDFLD_LIMT_DPLL_100];
} else {
limit = NULL;
dev_err(dev->dev, "mdfld_limit Wrong display type.\n");
}
return limit;
}
/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
static void mdfld_clock(int refclk, struct mdfld_intel_clock_t *clock)
{
clock->dot = (refclk * clock->m) / clock->p1;
}
/**
* Returns a set of divisors for the desired target clock with the given refclk,
* or FALSE. Divisor values are the actual divisors for
*/
static bool
mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
struct mdfld_intel_clock_t *best_clock)
{
struct mdfld_intel_clock_t clock;
const struct mdfld_limit_t *limit = mdfld_limit(crtc);
int err = target;
memset(best_clock, 0, sizeof(*best_clock));
for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
clock.p1++) {
int this_err;
mdfld_clock(refclk, &clock);
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
err = this_err;
}
}
}
return err != target;
}
/**
* Return the pipe currently connected to the panel fitter,
* or -1 if the panel fitter is not present or not in use
*/
static int mdfld_panel_fitter_pipe(struct drm_device *dev)
{
u32 pfit_control;
pfit_control = REG_READ(PFIT_CONTROL);
/* See if the panel fitter is in use */
if ((pfit_control & PFIT_ENABLE) == 0)
return -1;
return (pfit_control >> 29) & 3;
}
static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
struct drm_psb_private *dev_priv = dev->dev_private;
int pipe = psb_intel_crtc->pipe;
int fp_reg = MRST_FPA0;
int dpll_reg = MRST_DPLL_A;
int dspcntr_reg = DSPACNTR;
int pipeconf_reg = PIPEACONF;
int htot_reg = HTOTAL_A;
int hblank_reg = HBLANK_A;
int hsync_reg = HSYNC_A;
int vtot_reg = VTOTAL_A;
int vblank_reg = VBLANK_A;
int vsync_reg = VSYNC_A;
int dspsize_reg = DSPASIZE;
int dsppos_reg = DSPAPOS;
int pipesrc_reg = PIPEASRC;
u32 *pipeconf = &dev_priv->pipeconf;
u32 *dspcntr = &dev_priv->dspcntr;
int refclk = 0;
int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0, clk_tmp = 0;
struct mdfld_intel_clock_t clock;
bool ok;
u32 dpll = 0, fp = 0;
bool is_crt = false, is_lvds = false, is_tv = false;
bool is_mipi = false, is_mipi2 = false, is_hdmi = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct psb_intel_output *psb_intel_output = NULL;
uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
struct drm_encoder *encoder;
struct drm_connector *connector;
int timeout = 0;
dev_dbg(dev->dev, "pipe = 0x%x \n", pipe);
switch (pipe) {
case 0:
break;
case 1:
fp_reg = FPB0;
dpll_reg = DPLL_B;
dspcntr_reg = DSPBCNTR;
pipeconf_reg = PIPEBCONF;
htot_reg = HTOTAL_B;
hblank_reg = HBLANK_B;
hsync_reg = HSYNC_B;
vtot_reg = VTOTAL_B;
vblank_reg = VBLANK_B;
vsync_reg = VSYNC_B;
dspsize_reg = DSPBSIZE;
dsppos_reg = DSPBPOS;
pipesrc_reg = PIPEBSRC;
pipeconf = &dev_priv->pipeconf1;
dspcntr = &dev_priv->dspcntr1;
fp_reg = MDFLD_DPLL_DIV0;
dpll_reg = MDFLD_DPLL_B;
break;
case 2:
dpll_reg = MRST_DPLL_A;
dspcntr_reg = DSPCCNTR;
pipeconf_reg = PIPECCONF;
htot_reg = HTOTAL_C;
hblank_reg = HBLANK_C;
hsync_reg = HSYNC_C;
vtot_reg = VTOTAL_C;
vblank_reg = VBLANK_C;
vsync_reg = VSYNC_C;
dspsize_reg = DSPCSIZE;
dsppos_reg = DSPCPOS;
pipesrc_reg = PIPECSRC;
pipeconf = &dev_priv->pipeconf2;
dspcntr = &dev_priv->dspcntr2;
break;
default:
DRM_ERROR("Illegal Pipe Number. \n");
return 0;
}
dev_dbg(dev->dev, "adjusted_hdisplay = %d\n",
adjusted_mode->hdisplay);
dev_dbg(dev->dev, "adjusted_vdisplay = %d\n",
adjusted_mode->vdisplay);
dev_dbg(dev->dev, "adjusted_hsync_start = %d\n",
adjusted_mode->hsync_start);
dev_dbg(dev->dev, "adjusted_hsync_end = %d\n",
adjusted_mode->hsync_end);
dev_dbg(dev->dev, "adjusted_htotal = %d\n",
adjusted_mode->htotal);
dev_dbg(dev->dev, "adjusted_vsync_start = %d\n",
adjusted_mode->vsync_start);
dev_dbg(dev->dev, "adjusted_vsync_end = %d\n",
adjusted_mode->vsync_end);
dev_dbg(dev->dev, "adjusted_vtotal = %d\n",
adjusted_mode->vtotal);
dev_dbg(dev->dev, "adjusted_clock = %d\n",
adjusted_mode->clock);
dev_dbg(dev->dev, "hdisplay = %d\n",
mode->hdisplay);
dev_dbg(dev->dev, "vdisplay = %d\n",
mode->vdisplay);
if (!gma_power_begin(dev, true))
return 0;
memcpy(&psb_intel_crtc->saved_mode, mode, sizeof(struct drm_display_mode));
memcpy(&psb_intel_crtc->saved_adjusted_mode, adjusted_mode, sizeof(struct drm_display_mode));
list_for_each_entry(connector, &mode_config->connector_list, head) {
encoder = connector->encoder;
if(!encoder)
continue;
if (encoder->crtc != crtc)
continue;
psb_intel_output = to_psb_intel_output(connector);
dev_dbg(dev->dev, "output->type = 0x%x \n", psb_intel_output->type);
switch (psb_intel_output->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
case INTEL_OUTPUT_ANALOG:
is_crt = true;
break;
case INTEL_OUTPUT_MIPI:
is_mipi = true;
break;
case INTEL_OUTPUT_MIPI2:
is_mipi2 = true;
break;
case INTEL_OUTPUT_HDMI:
is_hdmi = true;
break;
}
}
/* Disable the VGA plane that we never use */
REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
/* Disable the panel fitter if it was on our pipe */
if (mdfld_panel_fitter_pipe(dev) == pipe)
REG_WRITE(PFIT_CONTROL, 0);
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
*/
if (pipe == 1) {
/* FIXME: To make HDMI display with 864x480 (TPO), 480x864 (PYR) or 480x854 (TMD), set the sprite
* width/height and souce image size registers with the adjusted mode for pipe B. */
/* The defined sprite rectangle must always be completely contained within the displayable
* area of the screen image (frame buffer). */
REG_WRITE(dspsize_reg, ((MIN(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16)
| (MIN(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1));
/* Set the CRTC with encoder mode. */
REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16)
| (mode->crtc_vdisplay - 1));
} else {
REG_WRITE(dspsize_reg, ((mode->crtc_vdisplay - 1) << 16) | (mode->crtc_hdisplay - 1));
REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
}
REG_WRITE(dsppos_reg, 0);
if (psb_intel_output)
drm_connector_property_get_value(&psb_intel_output->base,
dev->mode_config.scaling_mode_property, &scalingType);
if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
/*Moorestown doesn't have register support for centering so we need to
mess with the h/vblank and h/vsync start and ends to get centering*/
int offsetX = 0, offsetY = 0;
offsetX = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
offsetY = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
((adjusted_mode->crtc_vtotal - 1) << 16));
REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - offsetX - 1) |
((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - offsetX - 1) |
((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - offsetY - 1) |
((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - offsetY - 1) |
((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
} else {
REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
((adjusted_mode->crtc_vtotal - 1) << 16));
REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
((adjusted_mode->crtc_hblank_end - 1) << 16));
REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
((adjusted_mode->crtc_hsync_end - 1) << 16));
REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
((adjusted_mode->crtc_vblank_end - 1) << 16));
REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
((adjusted_mode->crtc_vsync_end - 1) << 16));
}
/* Flush the plane changes */
{
struct drm_crtc_helper_funcs *crtc_funcs =
crtc->helper_private;
crtc_funcs->mode_set_base(crtc, x, y, old_fb);
}
/* setup pipeconf */
*pipeconf = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */
/* Set up the display plane register */
*dspcntr = REG_READ(dspcntr_reg);
*dspcntr |= pipe << DISPPLANE_SEL_PIPE_POS;
*dspcntr |= DISPLAY_PLANE_ENABLE;
/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_BOTTOM; */
/* MDFLD_PO_JLIU7 dspcntr |= DISPPLANE_GAMMA_ENABLE; */
if (is_mipi2)
{
goto mrst_crtc_mode_set_exit;
}
/* FIXME JLIU7 Add MDFLD HDMI supports */
/* FIXME_MDFLD JLIU7 DSIPLL clock *= 8? */
/* FIXME_MDFLD JLIU7 need to revist for dual MIPI supports */
clk = adjusted_mode->clock;
if (is_hdmi) {
if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
{
refclk = 19200;
if (is_mipi || is_mipi2)
{
clk_n = 1, clk_p2 = 8;
} else if (is_hdmi) {
clk_n = 1, clk_p2 = 10;
}
} else if (ksel == KSEL_BYPASS_25) {
refclk = 25000;
if (is_mipi || is_mipi2)
{
clk_n = 1, clk_p2 = 8;
} else if (is_hdmi) {
clk_n = 1, clk_p2 = 10;
}
} else if ((ksel == KSEL_BYPASS_83_100) && (dev_priv->core_freq == 166)) {
refclk = 83000;
if (is_mipi || is_mipi2)
{
clk_n = 4, clk_p2 = 8;
} else if (is_hdmi) {
clk_n = 4, clk_p2 = 10;
}
} else if ((ksel == KSEL_BYPASS_83_100) &&
(dev_priv->core_freq == 100 || dev_priv->core_freq == 200)) {
refclk = 100000;
if (is_mipi || is_mipi2)
{
clk_n = 4, clk_p2 = 8;
} else if (is_hdmi) {
clk_n = 4, clk_p2 = 10;
}
}
if (is_mipi)
clk_byte = dev_priv->bpp / 8;
else if (is_mipi2)
clk_byte = dev_priv->bpp2 / 8;
clk_tmp = clk * clk_n * clk_p2 * clk_byte;
dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d. \n", clk, clk_n, clk_p2);
dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d. \n", adjusted_mode->clock, clk_tmp);
ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock);
if (!ok) {
dev_err(dev->dev,
"mdfldFindBestPLL fail in mdfld_crtc_mode_set. \n");
} else {
m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)];
dev_dbg(dev->dev, "dot clock = %d,"
"m = %d, p1 = %d, m_conv = %d. \n", clock.dot, clock.m,
clock.p1, m_conv);
}
dpll = REG_READ(dpll_reg);
if (dpll & DPLL_VCO_ENABLE) {
dpll &= ~DPLL_VCO_ENABLE;
REG_WRITE(dpll_reg, dpll);
REG_READ(dpll_reg);
/* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
/* reset M1, N1 & P1 */
REG_WRITE(fp_reg, 0);
dpll &= ~MDFLD_P1_MASK;
REG_WRITE(dpll_reg, dpll);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
}
/* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
if (dpll & MDFLD_PWR_GATE_EN) {
dpll &= ~MDFLD_PWR_GATE_EN;
REG_WRITE(dpll_reg, dpll);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
}
dpll = 0;
#if 0 /* FIXME revisit later */
if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19) || (ksel == KSEL_BYPASS_25)) {
dpll &= ~MDFLD_INPUT_REF_SEL;
} else if (ksel == KSEL_BYPASS_83_100) {
dpll |= MDFLD_INPUT_REF_SEL;
}
#endif /* FIXME revisit later */
if (is_hdmi)
dpll |= MDFLD_VCO_SEL;
fp = (clk_n / 2) << 16;
fp |= m_conv;
/* compute bitmask from p1 value */
dpll |= (1 << (clock.p1 - 2)) << 17;
#if 0 /* 1080p30 & 720p */
dpll = 0x00050000;
fp = 0x000001be;
#endif
#if 0 /* 480p */
dpll = 0x02010000;
fp = 0x000000d2;
#endif
} else {
#if 0 /*DBI_TPO_480x864*/
dpll = 0x00020000;
fp = 0x00000156;
#endif /* DBI_TPO_480x864 */ /* get from spec. */
dpll = 0x00800000;
fp = 0x000000c1;
}
REG_WRITE(fp_reg, fp);
REG_WRITE(dpll_reg, dpll);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
dpll |= DPLL_VCO_ENABLE;
REG_WRITE(dpll_reg, dpll);
REG_READ(dpll_reg);
/* wait for DSI PLL to lock */
while ((timeout < 20000) && !(REG_READ(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
udelay(150);
timeout ++;
}
if (is_mipi)
goto mrst_crtc_mode_set_exit;
dev_dbg(dev->dev, "is_mipi = 0x%x \n", is_mipi);
REG_WRITE(pipeconf_reg, *pipeconf);
REG_READ(pipeconf_reg);
/* Wait for for the pipe enable to take effect. */
//FIXME_JLIU7 HDMI mrstWaitForPipeEnable(dev);
REG_WRITE(dspcntr_reg, *dspcntr);
psb_intel_wait_for_vblank(dev);
mrst_crtc_mode_set_exit:
gma_power_end(dev);
return 0;
}
static void mdfld_crtc_prepare(struct drm_crtc *crtc)
{
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void mdfld_crtc_commit(struct drm_crtc *crtc)
{
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
}
static bool mdfld_crtc_mode_fixup(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
const struct drm_crtc_helper_funcs mdfld_helper_funcs = {
.dpms = mdfld_crtc_dpms,
.mode_fixup = mdfld_crtc_mode_fixup,
.mode_set = mdfld_crtc_mode_set,
.mode_set_base = mdfld__intel_pipe_set_base,
.prepare = mdfld_crtc_prepare,
.commit = mdfld_crtc_commit,
};
