/*
* Greybus operations
*
* Copyright 2014 Google Inc.
*
* Released under the GPLv2 only.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/workqueue.h>
#include "greybus.h"
/*
* The top bit of the type in an operation message header indicates
* whether the message is a request (bit clear) or response (bit set)
*/
#define GB_OPERATION_TYPE_RESPONSE 0x80
#define OPERATION_TIMEOUT_DEFAULT 1000 /* milliseconds */
/*
* XXX This needs to be coordinated with host driver parameters
* XXX May need to reduce to allow for message header within a page
*/
#define GB_OPERATION_MESSAGE_SIZE_MAX 4096
static struct kmem_cache *gb_operation_cache;
/* Workqueue to handle Greybus operation completions. */
static struct workqueue_struct *gb_operation_recv_workqueue;
/*
* All operation messages (both requests and responses) begin with
* a common header that encodes the size of the data (header
* included). This header also contains a unique identifier, which
* is used to keep track of in-flight operations. Finally, the
* header contains a operation type field, whose interpretation is
* dependent on what type of device lies on the other end of the
* connection. Response messages are distinguished from request
* messages by setting the high bit (0x80) in the operation type
* value.
*
* The wire format for all numeric fields in the header is little
* endian. Any operation-specific data begins immediately after the
* header, and is 64-bit aligned.
*/
struct gb_operation_msg_hdr {
__le16 size; /* Size in bytes of header + payload */
__le16 id; /* Operation unique id */
__u8 type; /* E.g GB_I2C_TYPE_* or GB_GPIO_TYPE_* */
/* 3 bytes pad, must be zero (ignore when read) */
} __aligned(sizeof(u64));
/* XXX Could be per-host device, per-module, or even per-connection */
static DEFINE_SPINLOCK(gb_operations_lock);
static void gb_pending_operation_insert(struct gb_operation *operation)
{
struct gb_connection *connection = operation->connection;
struct gb_operation_msg_hdr *header;
/*
* Assign the operation's id and move it into its
* connection's pending list.
*/
spin_lock_irq(&gb_operations_lock);
operation->id = ++connection->op_cycle;
list_move_tail(&operation->links, &connection->pending);
spin_unlock_irq(&gb_operations_lock);
/* Store the operation id in the request header */
header = operation->request.gbuf.transfer_buffer;
header->id = cpu_to_le16(operation->id);
}
static void gb_pending_operation_remove(struct gb_operation *operation)
{
struct gb_connection *connection = operation->connection;
/* Take us off of the list of pending operations */
spin_lock_irq(&gb_operations_lock);
list_move_tail(&operation->links, &connection->operations);
spin_unlock_irq(&gb_operations_lock);
}
static struct gb_operation *
gb_pending_operation_find(struct gb_connection *connection, u16 id)
{
struct gb_operation *operation;
bool found = false;
spin_lock_irq(&gb_operations_lock);
list_for_each_entry(operation, &connection->pending, links)
if (operation->id == id) {
found = true;
break;
}
spin_unlock_irq(&gb_operations_lock);
return found ? operation : NULL;
}
static int gb_message_send(struct gb_message *message, gfp_t gfp_mask)
{
struct greybus_host_device *hd = message->gbuf.hd;
message->gbuf.status = -EINPROGRESS;
message->gbuf.hcd_data = hd->driver->buffer_send(hd,
message->gbuf.dest_cport_id,
message->gbuf.transfer_buffer,
message->gbuf.transfer_buffer_length,
gfp_mask);
if (IS_ERR(message->gbuf.hcd_data)) {
message->gbuf.status = PTR_ERR(message->gbuf.hcd_data);
message->gbuf.hcd_data = NULL;
return message->gbuf.status;
}
return 0;
}
static void greybus_kill_gbuf(struct gbuf *gbuf)
{
if (gbuf->status != -EINPROGRESS)
return;
gbuf->hd->driver->buffer_cancel(gbuf->hcd_data);
}
/*
* An operations's response message has arrived. If no callback was
* supplied it was submitted for asynchronous completion, so we notify
* any waiters. Otherwise we assume calling the completion is enough
* and nobody else will be waiting.
*/
static void gb_operation_complete(struct gb_operation *operation)
{
if (operation->callback)
operation->callback(operation);
else
complete_all(&operation->completion);
}
/* Wait for a submitted operation to complete */
int gb_operation_wait(struct gb_operation *operation)
{
int ret;
ret = wait_for_completion_interruptible(&operation->completion);
/* If interrupted, cancel the in-flight buffer */
if (ret < 0)
greybus_kill_gbuf(&operation->request.gbuf);
return ret;
}
static void gb_operation_request_handle(struct gb_operation *operation)
{
struct gb_protocol *protocol = operation->connection->protocol;
struct gb_operation_msg_hdr *header;
header = operation->request.gbuf.transfer_buffer;
/*
* If the protocol has no incoming request handler, report
* an error and mark the request bad.
*/
if (protocol->request_recv) {
protocol->request_recv(header->type, operation);
goto out;
}
gb_connection_err(operation->connection,
"unexpected incoming request type 0x%02hhx\n", header->type);
operation->result = GB_OP_PROTOCOL_BAD;
out:
gb_operation_complete(operation);
}
/*
* Either this operation contains an incoming request, or its
* response has arrived. An incoming request will have a null
* response buffer pointer (it is the responsibility of the request
* handler to allocate and fill in the response buffer).
*/
static void gb_operation_recv_work(struct work_struct *recv_work)
{
struct gb_operation *operation;
bool incoming_request;
operation = container_of(recv_work, struct gb_operation, recv_work);
incoming_request = operation->response.gbuf.transfer_buffer == NULL;
if (incoming_request)
gb_operation_request_handle(operation);
gb_operation_complete(operation);
}
/*
* Timeout call for the operation.
*
* If this fires, something went wrong, so mark the result as timed out, and
* run the completion handler, which (hopefully) should clean up the operation
* properly.
*/
static void operation_timeout(struct work_struct *work)
{
struct gb_operation *operation;
operation = container_of(work, struct gb_operation, timeout_work.work);
pr_debug("%s: timeout!\n", __func__);
operation->result = GB_OP_TIMEOUT;
gb_operation_complete(operation);
}
/*
* Allocate a buffer to be used for an operation request or response
* message. For outgoing messages, both types of message contain a
* common header, which is filled in here. Incoming requests or
* responses also contain the same header, but there's no need to
* initialize it here (it'll be overwritten by the incoming
* message).
*/
static int gb_operation_message_init(struct gb_operation *operation,
u8 type, size_t size,
bool request, bool outbound)
{
struct gb_connection *connection = operation->connection;
struct greybus_host_device *hd = connection->hd;
struct gb_message *message;
struct gb_operation_msg_hdr *header;
gfp_t gfp_flags = request && !outbound ? GFP_ATOMIC : GFP_KERNEL;
u16 dest_cport_id;
if (size > GB_OPERATION_MESSAGE_SIZE_MAX)
return -E2BIG;
size += sizeof(*header);
if (request) {
message = &operation->request;
} else {
message = &operation->response;
type |= GB_OPERATION_TYPE_RESPONSE;
}
if (outbound)
dest_cport_id = connection->interface_cport_id;
else
dest_cport_id = CPORT_ID_BAD;
message->gbuf.transfer_buffer = hd->driver->buffer_alloc(size, gfp_flags);
if (!message->gbuf.transfer_buffer)
return -ENOMEM;
message->gbuf.transfer_buffer_length = size;
message->gbuf.hd = hd;
message->gbuf.dest_cport_id = dest_cport_id;
message->gbuf.status = -EBADR; /* Initial value--means "never set" */
/* Fill in the header structure */
header = message->gbuf.transfer_buffer;
header->size = cpu_to_le16(size);
header->id = 0; /* Filled in when submitted */
header->type = type;
message->payload = header + 1;
message->operation = operation;
return 0;
}
static void gb_operation_message_exit(struct gb_message *message)
{
message->operation = NULL;
message->payload = NULL;
message->gbuf.hd->driver->buffer_free(message->gbuf.transfer_buffer);
message->gbuf.transfer_buffer = NULL;
message->gbuf.transfer_buffer_length = 0;
}
/*
* Create a Greybus operation to be sent over the given connection.
* The request buffer will big enough for a payload of the given
* size. Outgoing requests must specify the size of the response
* buffer size, which must be sufficient to hold all expected
* response data.
*
* Incoming requests will supply a response size of 0, and in that
* case no response buffer is allocated. (A response always
* includes a status byte, so 0 is not a valid size.) Whatever
* handles the operation request is responsible for allocating the
* response buffer.
*
* Returns a pointer to the new operation or a null pointer if an
* error occurs.
*/
struct gb_operation *gb_operation_create(struct gb_connection *connection,
u8 type, size_t request_size,
size_t response_size)
{
struct gb_operation *operation;
gfp_t gfp_flags = response_size ? GFP_KERNEL : GFP_ATOMIC;
bool outgoing = response_size != 0;
int ret;
operation = kmem_cache_zalloc(gb_operation_cache, gfp_flags);
if (!operation)
return NULL;
operation->connection = connection;
ret = gb_operation_message_init(operation, type, request_size,
true, outgoing);
if (ret)
goto err_cache;
if (outgoing) {
ret = gb_operation_message_init(operation, type, response_size,
false, false);
if (ret)
goto err_request;
}
INIT_WORK(&operation->recv_work, gb_operation_recv_work);
operation->callback = NULL; /* set at submit time */
init_completion(&operation->completion);
INIT_DELAYED_WORK(&operation->timeout_work, operation_timeout);
kref_init(&operation->kref);
spin_lock_irq(&gb_operations_lock);
list_add_tail(&operation->links, &connection->operations);
spin_unlock_irq(&gb_operations_lock);
return operation;
err_request:
gb_operation_message_exit(&operation->request);
err_cache:
kmem_cache_free(gb_operation_cache, operation);
return NULL;
}
/*
* Destroy a previously created operation.
*/
static void _gb_operation_destroy(struct kref *kref)
{
struct gb_operation *operation;
operation = container_of(kref, struct gb_operation, kref);
/* XXX Make sure it's not in flight */
spin_lock_irq(&gb_operations_lock);
list_del(&operation->links);
spin_unlock_irq(&gb_operations_lock);
gb_operation_message_exit(&operation->response);
gb_operation_message_exit(&operation->request);
kmem_cache_free(gb_operation_cache, operation);
}
void gb_operation_put(struct gb_operation *operation)
{
if (!WARN_ON(!operation))
kref_put(&operation->kref, _gb_operation_destroy);
}
/*
* Send an operation request message. The caller has filled in
* any payload so the request message is ready to go. If non-null,
* the callback function supplied will be called when the response
* message has arrived indicating the operation is complete. A null
* callback function is used for a synchronous request; return from
* this function won't occur until the operation is complete (or an
* interrupt occurs).
*/
int gb_operation_request_send(struct gb_operation *operation,
gb_operation_callback callback)
{
unsigned long timeout;
int ret;
if (operation->connection->state != GB_CONNECTION_STATE_ENABLED)
return -ENOTCONN;
/*
* XXX
* I think the order of operations is going to be
* significant, and if so, we may need a mutex to surround
* setting the operation id and submitting the gbuf.
*/
operation->callback = callback;
gb_pending_operation_insert(operation);
ret = gb_message_send(&operation->request, GFP_KERNEL);
if (ret)
return ret;
/* We impose a time limit for requests to complete. */
timeout = msecs_to_jiffies(OPERATION_TIMEOUT_DEFAULT);
schedule_delayed_work(&operation->timeout_work, timeout);
if (!callback)
ret = gb_operation_wait(operation);
return ret;
}
/*
* Send a response for an incoming operation request.
*/
int gb_operation_response_send(struct gb_operation *operation)
{
gb_operation_destroy(operation);
return 0;
}
/*
* Handle data arriving on a connection. As soon as we return, the
* incoming data buffer will be reused, so we need to copy the data
* into one of our own operation message buffers.
*
* If the incoming data is an operation response message, look up
* the operation and copy the incoming data into its response
* buffer. Otherwise allocate a new operation and copy the incoming
* data into its request buffer.
*
* This is called in interrupt context, so just copy the incoming
* data into the buffer and do remaining handling via a work queue.
*
*/
void gb_connection_operation_recv(struct gb_connection *connection,
void *data, size_t size)
{
struct gb_operation_msg_hdr *header;
struct gb_operation *operation;
struct gbuf *gbuf;
u16 msg_size;
if (connection->state != GB_CONNECTION_STATE_ENABLED)
return;
if (size < sizeof(*header)) {
gb_connection_err(connection, "message too small");
return;
}
header = data;
msg_size = le16_to_cpu(header->size);
if (header->type & GB_OPERATION_TYPE_RESPONSE) {
u16 id = le16_to_cpu(header->id);
operation = gb_pending_operation_find(connection, id);
if (!operation) {
gb_connection_err(connection, "operation not found");
return;
}
cancel_delayed_work(&operation->timeout_work);
gb_pending_operation_remove(operation);
gbuf = &operation->response.gbuf;
if (size > gbuf->transfer_buffer_length) {
operation->result = GB_OP_OVERFLOW;
gb_connection_err(connection, "recv buffer too small");
return;
}
operation->result = GB_OP_SUCCESS;
} else {
WARN_ON(msg_size != size);
operation = gb_operation_create(connection, header->type,
msg_size, 0);
if (!operation) {
gb_connection_err(connection, "can't create operation");
return;
}
gbuf = &operation->request.gbuf;
}
memcpy(gbuf->transfer_buffer, data, msg_size);
/* The rest will be handled in work queue context */
queue_work(gb_operation_recv_workqueue, &operation->recv_work);
}
/*
* Cancel an operation.
*/
void gb_operation_cancel(struct gb_operation *operation)
{
operation->canceled = true;
greybus_kill_gbuf(&operation->request.gbuf);
if (operation->response.gbuf.transfer_buffer)
greybus_kill_gbuf(&operation->response.gbuf);
}
int gb_operation_init(void)
{
gb_operation_cache = kmem_cache_create("gb_operation_cache",
sizeof(struct gb_operation), 0, 0, NULL);
if (!gb_operation_cache)
return -ENOMEM;
gb_operation_recv_workqueue = alloc_workqueue("greybus_recv", 0, 1);
if (!gb_operation_recv_workqueue) {
kmem_cache_destroy(gb_operation_cache);
gb_operation_cache = NULL;
return -ENOMEM;
}
return 0;
}
void gb_operation_exit(void)
{
destroy_workqueue(gb_operation_recv_workqueue);
gb_operation_recv_workqueue = NULL;
kmem_cache_destroy(gb_operation_cache);
gb_operation_cache = NULL;
}
