|
|
/* SPDX-License-Identifier: GPL-2.0 */
/*****************************************************************************
* Copyright(c) 2008, RealTEK Technology Inc. All Right Reserved.
*
* Module: __INC_HAL8192SPHYREG_H
*
*
* Note: 1. Define PMAC/BB register map
* 2. Define RF register map
* 3. PMAC/BB register bit mask.
* 4. RF reg bit mask.
* 5. Other BB/RF relative definition.
*
*
* Export: Constants, macro, functions(API), global variables(None).
*
* Abbrev:
*
* History:
* Data Who Remark
* 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
* 2. Reorganize code architecture.
* 09/25/2008 MH 1. Add RL6052 register definition
*
*****************************************************************************/
#ifndef __RTL871X_MP_PHY_REGDEF_H
#define __RTL871X_MP_PHY_REGDEF_H
/*--------------------------Define Parameters-------------------------------*/
/*============================================================
* 8192S Regsiter offset definition
*============================================================
*
*
* BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
* 3. RF register 0x00-2E
* 4. Bit Mask for BB/RF register
* 5. Other definition for BB/RF R/W
*
* 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
* 1. Page1(0x100)
*/
#define rPMAC_Reset 0x100
#define rPMAC_TxStart 0x104
#define rPMAC_TxLegacySIG 0x108
#define rPMAC_TxHTSIG1 0x10c
#define rPMAC_TxHTSIG2 0x110
#define rPMAC_PHYDebug 0x114
#define rPMAC_TxPacketNum 0x118
#define rPMAC_TxIdle 0x11c
#define rPMAC_TxMACHeader0 0x120
#define rPMAC_TxMACHeader1 0x124
#define rPMAC_TxMACHeader2 0x128
#define rPMAC_TxMACHeader3 0x12c
#define rPMAC_TxMACHeader4 0x130
#define rPMAC_TxMACHeader5 0x134
#define rPMAC_TxDataType 0x138
#define rPMAC_TxRandomSeed 0x13c
#define rPMAC_CCKPLCPPreamble 0x140
#define rPMAC_CCKPLCPHeader 0x144
#define rPMAC_CCKCRC16 0x148
#define rPMAC_OFDMRxCRC32OK 0x170
#define rPMAC_OFDMRxCRC32Er 0x174
#define rPMAC_OFDMRxParityEr 0x178
#define rPMAC_OFDMRxCRC8Er 0x17c
#define rPMAC_CCKCRxRC16Er 0x180
#define rPMAC_CCKCRxRC32Er 0x184
#define rPMAC_CCKCRxRC32OK 0x188
#define rPMAC_TxStatus 0x18c
/*
* 2. Page2(0x200)
*
* The following two definition are only used for USB interface.
*#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address.
*#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data.
*
*
* 3. Page8(0x800)
*/
#define rFPGA0_RFMOD 0x800 /*RF mode & CCK TxSC RF
* BW Setting??
*/
#define rFPGA0_TxInfo 0x804 /* Status report?? */
#define rFPGA0_PSDFunction 0x808
#define rFPGA0_TxGainStage 0x80c /* Set TX PWR init gain? */
#define rFPGA0_RFTiming1 0x810 /* Useless now */
#define rFPGA0_RFTiming2 0x814
#define rFPGA0_XA_HSSIParameter1 0x820 /* RF 3 wire register */
#define rFPGA0_XA_HSSIParameter2 0x824
#define rFPGA0_XB_HSSIParameter1 0x828
#define rFPGA0_XB_HSSIParameter2 0x82c
#define rFPGA0_XC_HSSIParameter1 0x830
#define rFPGA0_XC_HSSIParameter2 0x834
#define rFPGA0_XD_HSSIParameter1 0x838
#define rFPGA0_XD_HSSIParameter2 0x83c
#define rFPGA0_XA_LSSIParameter 0x840
#define rFPGA0_XB_LSSIParameter 0x844
#define rFPGA0_XC_LSSIParameter 0x848
#define rFPGA0_XD_LSSIParameter 0x84c
#define rFPGA0_RFWakeUpParameter 0x850 /* Useless now */
#define rFPGA0_RFSleepUpParameter 0x854
#define rFPGA0_XAB_SwitchControl 0x858 /* RF Channel switch */
#define rFPGA0_XCD_SwitchControl 0x85c
#define rFPGA0_XA_RFInterfaceOE 0x860 /* RF Channel switch */
#define rFPGA0_XB_RFInterfaceOE 0x864
#define rFPGA0_XC_RFInterfaceOE 0x868
#define rFPGA0_XD_RFInterfaceOE 0x86c
#define rFPGA0_XAB_RFInterfaceSW 0x870 /* RF Interface Software Ctrl */
#define rFPGA0_XCD_RFInterfaceSW 0x874
#define rFPGA0_XAB_RFParameter 0x878 /* RF Parameter */
#define rFPGA0_XCD_RFParameter 0x87c
#define rFPGA0_AnalogParameter1 0x880 /* Crystal cap setting
* RF-R/W protection
* for parameter4??
*/
#define rFPGA0_AnalogParameter2 0x884
#define rFPGA0_AnalogParameter3 0x888 /* Useless now */
#define rFPGA0_AnalogParameter4 0x88c
#define rFPGA0_XA_LSSIReadBack 0x8a0 /* Tranceiver LSSI Readback */
#define rFPGA0_XB_LSSIReadBack 0x8a4
#define rFPGA0_XC_LSSIReadBack 0x8a8
#define rFPGA0_XD_LSSIReadBack 0x8ac
#define rFPGA0_PSDReport 0x8b4 /* Useless now */
#define rFPGA0_XAB_RFInterfaceRB 0x8e0 /* Useless now */
#define rFPGA0_XCD_RFInterfaceRB 0x8e4 /* Useless now */
/*
* 4. Page9(0x900)
*/
#define rFPGA1_RFMOD 0x900 /* RF mode & OFDM TxSC */
#define rFPGA1_TxBlock 0x904 /* Useless now */
#define rFPGA1_DebugSelect 0x908 /* Useless now */
#define rFPGA1_TxInfo 0x90c /* Useless now */
/*
* 5. PageA(0xA00)
*
* Set Control channel to upper or lower.
* These settings are required only for 40MHz
*/
#define rCCK0_System 0xa00
#define rCCK0_AFESetting 0xa04 /* Disable init gain now */
#define rCCK0_CCA 0xa08 /* Disable init gain now */
#define rCCK0_RxAGC1 0xa0c
/* AGC default value, saturation level
* Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now.
* Not the same as 90 series
*/
#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
#define rCCK0_RxHP 0xa14
#define rCCK0_DSPParameter1 0xa18 /* Timing recovery & Channel
* estimation threshold
*/
#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
#define rCCK0_TxFilter1 0xa20
#define rCCK0_TxFilter2 0xa24
#define rCCK0_DebugPort 0xa28 /* debug port and Tx filter3 */
#define rCCK0_FalseAlarmReport 0xa2c /* 0xa2d useless now 0xa30-a4f
* channel report
*/
#define rCCK0_TRSSIReport 0xa50
#define rCCK0_RxReport 0xa54 /* 0xa57 */
#define rCCK0_FACounterLower 0xa5c /* 0xa5b */
#define rCCK0_FACounterUpper 0xa58 /* 0xa5c */
/*
* 6. PageC(0xC00)
*/
#define rOFDM0_LSTF 0xc00
#define rOFDM0_TRxPathEnable 0xc04
#define rOFDM0_TRMuxPar 0xc08
#define rOFDM0_TRSWIsolation 0xc0c
/*RxIQ DC offset, Rx digital filter, DC notch filter */
#define rOFDM0_XARxAFE 0xc10
#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */
#define rOFDM0_XBRxAFE 0xc18
#define rOFDM0_XBRxIQImbalance 0xc1c
#define rOFDM0_XCRxAFE 0xc20
#define rOFDM0_XCRxIQImbalance 0xc24
#define rOFDM0_XDRxAFE 0xc28
#define rOFDM0_XDRxIQImbalance 0xc2c
#define rOFDM0_RxDetector1 0xc30 /* PD,BW & SBD DM tune
* init gain
*/
#define rOFDM0_RxDetector2 0xc34 /* SBD & Fame Sync. */
#define rOFDM0_RxDetector3 0xc38 /* Frame Sync. */
#define rOFDM0_RxDetector4 0xc3c /* PD, SBD, Frame Sync &
* Short-GI
*/
#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
#define rOFDM0_CCADropThreshold 0xc48 /* CCA Drop threshold */
#define rOFDM0_ECCAThreshold 0xc4c /* energy CCA */
#define rOFDM0_XAAGCCore1 0xc50 /* DIG */
#define rOFDM0_XAAGCCore2 0xc54
#define rOFDM0_XBAGCCore1 0xc58
#define rOFDM0_XBAGCCore2 0xc5c
#define rOFDM0_XCAGCCore1 0xc60
#define rOFDM0_XCAGCCore2 0xc64
#define rOFDM0_XDAGCCore1 0xc68
#define rOFDM0_XDAGCCore2 0xc6c
#define rOFDM0_AGCParameter1 0xc70
#define rOFDM0_AGCParameter2 0xc74
#define rOFDM0_AGCRSSITable 0xc78
#define rOFDM0_HTSTFAGC 0xc7c
#define rOFDM0_XATxIQImbalance 0xc80 /* TX PWR TRACK and DIG */
#define rOFDM0_XATxAFE 0xc84
#define rOFDM0_XBTxIQImbalance 0xc88
#define rOFDM0_XBTxAFE 0xc8c
#define rOFDM0_XCTxIQImbalance 0xc90
#define rOFDM0_XCTxAFE 0xc94
#define rOFDM0_XDTxIQImbalance 0xc98
#define rOFDM0_XDTxAFE 0xc9c
#define rOFDM0_RxHPParameter 0xce0
#define rOFDM0_TxPseudoNoiseWgt 0xce4
#define rOFDM0_FrameSync 0xcf0
#define rOFDM0_DFSReport 0xcf4
#define rOFDM0_TxCoeff1 0xca4
#define rOFDM0_TxCoeff2 0xca8
#define rOFDM0_TxCoeff3 0xcac
#define rOFDM0_TxCoeff4 0xcb0
#define rOFDM0_TxCoeff5 0xcb4
#define rOFDM0_TxCoeff6 0xcb8
/*
* 7. PageD(0xD00)
*/
#define rOFDM1_LSTF 0xd00
#define rOFDM1_TRxPathEnable 0xd04
#define rOFDM1_CFO 0xd08 /* No setting now */
#define rOFDM1_CSI1 0xd10
#define rOFDM1_SBD 0xd14
#define rOFDM1_CSI2 0xd18
#define rOFDM1_CFOTracking 0xd2c
#define rOFDM1_TRxMesaure1 0xd34
#define rOFDM1_IntfDet 0xd3c
#define rOFDM1_PseudoNoiseStateAB 0xd50
#define rOFDM1_PseudoNoiseStateCD 0xd54
#define rOFDM1_RxPseudoNoiseWgt 0xd58
#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
#define rOFDM_PHYCounter3 0xda8 /* MCS not support */
#define rOFDM_ShortCFOAB 0xdac /* No setting now */
#define rOFDM_ShortCFOCD 0xdb0
#define rOFDM_LongCFOAB 0xdb4
#define rOFDM_LongCFOCD 0xdb8
#define rOFDM_TailCFOAB 0xdbc
#define rOFDM_TailCFOCD 0xdc0
#define rOFDM_PWMeasure1 0xdc4
#define rOFDM_PWMeasure2 0xdc8
#define rOFDM_BWReport 0xdcc
#define rOFDM_AGCReport 0xdd0
#define rOFDM_RxSNR 0xdd4
#define rOFDM_RxEVMCSI 0xdd8
#define rOFDM_SIGReport 0xddc
/*
* 8. PageE(0xE00)
*/
#define rTxAGC_Rate18_06 0xe00
#define rTxAGC_Rate54_24 0xe04
#define rTxAGC_CCK_Mcs32 0xe08
#define rTxAGC_Mcs03_Mcs00 0xe10
#define rTxAGC_Mcs07_Mcs04 0xe14
#define rTxAGC_Mcs11_Mcs08 0xe18
#define rTxAGC_Mcs15_Mcs12 0xe1c
/* Analog- control in RX_WAIT_CCA : REG: EE0
* [Analog- Power & Control Register]
*/
#define rRx_Wait_CCCA 0xe70
#define rAnapar_Ctrl_BB 0xee0
/*
* 7. RF Register 0x00-0x2E (RF 8256)
* RF-0222D 0x00-3F
*
* Zebra1
*/
#define rZebra1_HSSIEnable 0x0 /* Useless now */
#define rZebra1_TRxEnable1 0x1
#define rZebra1_TRxEnable2 0x2
#define rZebra1_AGC 0x4
#define rZebra1_ChargePump 0x5
#define rZebra1_Channel 0x7 /* RF channel switch */
#define rZebra1_TxGain 0x8 /* Useless now */
#define rZebra1_TxLPF 0x9
#define rZebra1_RxLPF 0xb
#define rZebra1_RxHPFCorner 0xc
/* Zebra4 */
#define rGlobalCtrl 0 /* Useless now */
#define rRTL8256_TxLPF 19
#define rRTL8256_RxLPF 11
/* RTL8258 */
#define rRTL8258_TxLPF 0x11 /* Useless now */
#define rRTL8258_RxLPF 0x13
#define rRTL8258_RSSILPF 0xa
/* RL6052 Register definition */
#define RF_AC 0x00
#define RF_IQADJ_G1 0x01
#define RF_IQADJ_G2 0x02
#define RF_POW_TRSW 0x05
#define RF_GAIN_RX 0x06
#define RF_GAIN_TX 0x07
#define RF_TXM_IDAC 0x08
#define RF_BS_IQGEN 0x0F
#define RF_MODE1 0x10
#define RF_MODE2 0x11
#define RF_RX_AGC_HP 0x12
#define RF_TX_AGC 0x13
#define RF_BIAS 0x14
#define RF_IPA 0x15
#define RF_POW_ABILITY 0x17
#define RF_MODE_AG 0x18
#define rRfChannel 0x18 /* RF channel and BW switch */
#define RF_CHNLBW 0x18 /* RF channel and BW switch */
#define RF_TOP 0x19
#define RF_RX_G1 0x1A
#define RF_RX_G2 0x1B
#define RF_RX_BB2 0x1C
#define RF_RX_BB1 0x1D
#define RF_RCK1 0x1E
#define RF_RCK2 0x1F
#define RF_TX_G1 0x20
#define RF_TX_G2 0x21
#define RF_TX_G3 0x22
#define RF_TX_BB1 0x23
#define RF_T_METER 0x24
#define RF_SYN_G1 0x25 /* RF TX Power control */
#define RF_SYN_G2 0x26 /* RF TX Power control */
#define RF_SYN_G3 0x27 /* RF TX Power control */
#define RF_SYN_G4 0x28 /* RF TX Power control */
#define RF_SYN_G5 0x29 /* RF TX Power control */
#define RF_SYN_G6 0x2A /* RF TX Power control */
#define RF_SYN_G7 0x2B /* RF TX Power control */
#define RF_SYN_G8 0x2C /* RF TX Power control */
#define RF_RCK_OS 0x30 /* RF TX PA control */
#define RF_TXPA_G1 0x31 /* RF TX PA control */
#define RF_TXPA_G2 0x32 /* RF TX PA control */
#define RF_TXPA_G3 0x33 /* RF TX PA control */
/*
* Bit Mask
*
* 1. Page1(0x100)
*/
#define bBBResetB 0x100 /* Useless now? */
#define bGlobalResetB 0x200
#define bOFDMTxStart 0x4
#define bCCKTxStart 0x8
#define bCRC32Debug 0x100
#define bPMACLoopback 0x10
#define bTxLSIG 0xffffff
#define bOFDMTxRate 0xf
#define bOFDMTxReserved 0x10
#define bOFDMTxLength 0x1ffe0
#define bOFDMTxParity 0x20000
#define bTxHTSIG1 0xffffff
#define bTxHTMCSRate 0x7f
#define bTxHTBW 0x80
#define bTxHTLength 0xffff00
#define bTxHTSIG2 0xffffff
#define bTxHTSmoothing 0x1
#define bTxHTSounding 0x2
#define bTxHTReserved 0x4
#define bTxHTAggreation 0x8
#define bTxHTSTBC 0x30
#define bTxHTAdvanceCoding 0x40
#define bTxHTShortGI 0x80
#define bTxHTNumberHT_LTF 0x300
#define bTxHTCRC8 0x3fc00
#define bCounterReset 0x10000
#define bNumOfOFDMTx 0xffff
#define bNumOfCCKTx 0xffff0000
#define bTxIdleInterval 0xffff
#define bOFDMService 0xffff0000
#define bTxMACHeader 0xffffffff
#define bTxDataInit 0xff
#define bTxHTMode 0x100
#define bTxDataType 0x30000
#define bTxRandomSeed 0xffffffff
#define bCCKTxPreamble 0x1
#define bCCKTxSFD 0xffff0000
#define bCCKTxSIG 0xff
#define bCCKTxService 0xff00
#define bCCKLengthExt 0x8000
#define bCCKTxLength 0xffff0000
#define bCCKTxCRC16 0xffff
#define bCCKTxStatus 0x1
#define bOFDMTxStatus 0x2
#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && \
(_Offset <= 0xfff))
/* 2. Page8(0x800) */
#define bRFMOD 0x1 /* Reg 0x800 rFPGA0_RFMOD */
#define bJapanMode 0x2
#define bCCKTxSC 0x30
#define bCCKEn 0x1000000
#define bOFDMEn 0x2000000
#define bOFDMRxADCPhase 0x10000 /* Useless now */
#define bOFDMTxDACPhase 0x40000
#define bXATxAGC 0x3f
#define bXBTxAGC 0xf00 /* Reg 80c rFPGA0_TxGainStage */
#define bXCTxAGC 0xf000
#define bXDTxAGC 0xf0000
#define bPAStart 0xf0000000 /* Useless now */
#define bTRStart 0x00f00000
#define bRFStart 0x0000f000
#define bBBStart 0x000000f0
#define bBBCCKStart 0x0000000f
#define bPAEnd 0xf /* Reg0x814 */
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
#define bCCAMask 0x000000f0 /* T2R */
#define bR2RCCAMask 0x00000f00
#define bHSSI_R2TDelay 0xf8000000
#define bHSSI_T2RDelay 0xf80000
#define bContTxHSSI 0x400 /* change gain at continue Tx */
#define bIGFromCCK 0x200
#define bAGCAddress 0x3f
#define bRxHPTx 0x7000
#define bRxHPT2R 0x38000
#define bRxHPCCKIni 0xc0000
#define bAGCTxCode 0xc00000
#define bAGCRxCode 0x300000
#define b3WireDataLength 0x800 /* Reg 0x820~84f rFPGA0_XA_HSSIParm1 */
#define b3WireAddressLength 0x400
#define b3WireRFPowerDown 0x1 /* Useless now */
#define b5GPAPEPolarity 0x40000000
#define b2GPAPEPolarity 0x80000000
#define bRFSW_TxDefaultAnt 0x3
#define bRFSW_TxOptionAnt 0x30
#define bRFSW_RxDefaultAnt 0x300
#define bRFSW_RxOptionAnt 0x3000
#define bRFSI_3WireData 0x1
#define bRFSI_3WireClock 0x2
#define bRFSI_3WireLoad 0x4
#define bRFSI_3WireRW 0x8
#define bRFSI_3Wire 0xf
#define bRFSI_RFENV 0x10 /* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
#define bRFSI_TRSW 0x20 /* Useless now */
#define bRFSI_TRSWB 0x40
#define bRFSI_ANTSW 0x100
#define bRFSI_ANTSWB 0x200
#define bRFSI_PAPE 0x400
#define bRFSI_PAPE5G 0x800
#define bBandSelect 0x1
#define bHTSIG2_GI 0x80
#define bHTSIG2_Smoothing 0x01
#define bHTSIG2_Sounding 0x02
#define bHTSIG2_Aggreaton 0x08
#define bHTSIG2_STBC 0x30
#define bHTSIG2_AdvCoding 0x40
#define bHTSIG2_NumOfHTLTF 0x300
#define bHTSIG2_CRC8 0x3fc
#define bHTSIG1_MCS 0x7f
#define bHTSIG1_BandWidth 0x80
#define bHTSIG1_HTLength 0xffff
#define bLSIG_Rate 0xf
#define bLSIG_Reserved 0x10
#define bLSIG_Length 0x1fffe
#define bLSIG_Parity 0x20
#define bCCKRxPhase 0x4
#define bLSSIReadAddress 0x7f800000 /* T65 RF */
#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
#define bLSSIReadBackData 0xfffff /* T65 RF */
#define bLSSIReadOKFlag 0x1000 /* Useless now */
#define bCCKSampleRate 0x8 /*0: 44MHz, 1:88MHz*/
#define bRegulator0Standby 0x1
#define bRegulatorPLLStandby 0x2
#define bRegulator1Standby 0x4
#define bPLLPowerUp 0x8
#define bDPLLPowerUp 0x10
#define bDA10PowerUp 0x20
#define bAD7PowerUp 0x200
#define bDA6PowerUp 0x2000
#define bXtalPowerUp 0x4000
#define b40MDClkPowerUP 0x8000
#define bDA6DebugMode 0x20000
#define bDA6Swing 0x380000
/* Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
#define bADClkPhase 0x4000000
#define b80MClkDelay 0x18000000 /* Useless */
#define bAFEWatchDogEnable 0x20000000
/* Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */
#define bXtalCap01 0xc0000000
#define bXtalCap23 0x3
#define bXtalCap92x 0x0f000000
#define bXtalCap 0x0f000000
#define bIntDifClkEnable 0x400 /* Useless */
#define bExtSigClkEnable 0x800
#define bBandgapMbiasPowerUp 0x10000
#define bAD11SHGain 0xc0000
#define bAD11InputRange 0x700000
#define bAD11OPCurrent 0x3800000
#define bIPathLoopback 0x4000000
#define bQPathLoopback 0x8000000
#define bAFELoopback 0x10000000
#define bDA10Swing 0x7e0
#define bDA10Reverse 0x800
#define bDAClkSource 0x1000
#define bAD7InputRange 0x6000
#define bAD7Gain 0x38000
#define bAD7OutputCMMode 0x40000
#define bAD7InputCMMode 0x380000
#define bAD7Current 0xc00000
#define bRegulatorAdjust 0x7000000
#define bAD11PowerUpAtTx 0x1
#define bDA10PSAtTx 0x10
#define bAD11PowerUpAtRx 0x100
#define bDA10PSAtRx 0x1000
#define bCCKRxAGCFormat 0x200
#define bPSDFFTSamplepPoint 0xc000
#define bPSDAverageNum 0x3000
#define bIQPathControl 0xc00
#define bPSDFreq 0x3ff
#define bPSDAntennaPath 0x30
#define bPSDIQSwitch 0x40
#define bPSDRxTrigger 0x400000
#define bPSDTxTrigger 0x80000000
#define bPSDSineToneScale 0x7f000000
#define bPSDReport 0xffff
/* 3. Page9(0x900) */
#define bOFDMTxSC 0x30000000 /* Useless */
#define bCCKTxOn 0x1
#define bOFDMTxOn 0x2
#define bDebugPage 0xfff /* reset debug page and HWord, LWord */
#define bDebugItem 0xff /* reset debug page and LWord */
#define bAntL 0x10
#define bAntNonHT 0x100
#define bAntHT1 0x1000
#define bAntHT2 0x10000
#define bAntHT1S1 0x100000
#define bAntNonHTS1 0x1000000
/* 4. PageA(0xA00) */
#define bCCKBBMode 0x3 /* Useless */
#define bCCKTxPowerSaving 0x80
#define bCCKRxPowerSaving 0x40
#define bCCKSideBand 0x10 /* Reg 0xa00 rCCK0_System 20/40 switch*/
#define bCCKScramble 0x8 /* Useless */
#define bCCKAntDiversity 0x8000
#define bCCKCarrierRecovery 0x4000
#define bCCKTxRate 0x3000
#define bCCKDCCancel 0x0800
#define bCCKISICancel 0x0400
#define bCCKMatchFilter 0x0200
#define bCCKEqualizer 0x0100
#define bCCKPreambleDetect 0x800000
#define bCCKFastFalseCCA 0x400000
#define bCCKChEstStart 0x300000
#define bCCKCCACount 0x080000
#define bCCKcs_lim 0x070000
#define bCCKBistMode 0x80000000
#define bCCKCCAMask 0x40000000
#define bCCKTxDACPhase 0x4
#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
#define bCCKr_cp_mode0 0x0100
#define bCCKTxDCOffset 0xf0
#define bCCKRxDCOffset 0xf
#define bCCKCCAMode 0xc000
#define bCCKFalseCS_lim 0x3f00
#define bCCKCS_ratio 0xc00000
#define bCCKCorgBit_sel 0x300000
#define bCCKPD_lim 0x0f0000
#define bCCKNewCCA 0x80000000
#define bCCKRxHPofIG 0x8000
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
#define bCCKRFExtend 0x20000000 /* CCK Rx initial gain polarity */
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
#define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
#define bCCKFixedRxAGC 0x8000
#define bCCKAntennaPolarity 0x2000
#define bCCKTxFilterType 0x0c00
#define bCCKRxAGCReportType 0x0300
#define bCCKRxDAGCEn 0x80000000
#define bCCKRxDAGCPeriod 0x20000000
#define bCCKRxDAGCSatLevel 0x1f000000
#define bCCKTimingRecovery 0x800000
#define bCCKTxC0 0x3f0000
#define bCCKTxC1 0x3f000000
#define bCCKTxC2 0x3f
#define bCCKTxC3 0x3f00
#define bCCKTxC4 0x3f0000
#define bCCKTxC5 0x3f000000
#define bCCKTxC6 0x3f
#define bCCKTxC7 0x3f00
#define bCCKDebugPort 0xff0000
#define bCCKDACDebug 0x0f000000
#define bCCKFalseAlarmEnable 0x8000
#define bCCKFalseAlarmRead 0x4000
#define bCCKTRSSI 0x7f
#define bCCKRxAGCReport 0xfe
#define bCCKRxReport_AntSel 0x80000000
#define bCCKRxReport_MFOff 0x40000000
#define bCCKRxRxReport_SQLoss 0x20000000
#define bCCKRxReport_Pktloss 0x10000000
#define bCCKRxReport_Lockedbit 0x08000000
#define bCCKRxReport_RateError 0x04000000
#define bCCKRxReport_RxRate 0x03000000
#define bCCKRxFACounterLower 0xff
#define bCCKRxFACounterUpper 0xff000000
#define bCCKRxHPAGCStart 0xe000
#define bCCKRxHPAGCFinal 0x1c00
#define bCCKRxFalseAlarmEnable 0x8000
#define bCCKFACounterFreeze 0x4000
#define bCCKTxPathSel 0x10000000
#define bCCKDefaultRxPath 0xc000000
#define bCCKOptionRxPath 0x3000000
/* 5. PageC(0xC00) */
#define bNumOfSTF 0x3 /* Useless */
#define bShift_L 0xc0
#define bGI_TH 0xc
#define bRxPathA 0x1
#define bRxPathB 0x2
#define bRxPathC 0x4
#define bRxPathD 0x8
#define bTxPathA 0x1
#define bTxPathB 0x2
#define bTxPathC 0x4
#define bTxPathD 0x8
#define bTRSSIFreq 0x200
#define bADCBackoff 0x3000
#define bDFIRBackoff 0xc000
#define bTRSSILatchPhase 0x10000
#define bRxIDCOffset 0xff
#define bRxQDCOffset 0xff00
#define bRxDFIRMode 0x1800000
#define bRxDCNFType 0xe000000
#define bRXIQImb_A 0x3ff
#define bRXIQImb_B 0xfc00
#define bRXIQImb_C 0x3f0000
#define bRXIQImb_D 0xffc00000
#define bDC_dc_Notch 0x60000
#define bRxNBINotch 0x1f000000
#define bPD_TH 0xf
#define bPD_TH_Opt2 0xc000
#define bPWED_TH 0x700
#define bIfMF_Win_L 0x800
#define bPD_Option 0x1000
#define bMF_Win_L 0xe000
#define bBW_Search_L 0x30000
#define bwin_enh_L 0xc0000
#define bBW_TH 0x700000
#define bED_TH2 0x3800000
#define bBW_option 0x4000000
#define bRatio_TH 0x18000000
#define bWindow_L 0xe0000000
#define bSBD_Option 0x1
#define bFrame_TH 0x1c
#define bFS_Option 0x60
#define bDC_Slope_check 0x80
#define bFGuard_Counter_DC_L 0xe00
#define bFrame_Weight_Short 0x7000
#define bSub_Tune 0xe00000
#define bFrame_DC_Length 0xe000000
#define bSBD_start_offset 0x30000000
#define bFrame_TH_2 0x7
#define bFrame_GI2_TH 0x38
#define bGI2_Sync_en 0x40
#define bSarch_Short_Early 0x300
#define bSarch_Short_Late 0xc00
#define bSarch_GI2_Late 0x70000
#define bCFOAntSum 0x1
#define bCFOAcc 0x2
#define bCFOStartOffset 0xc
#define bCFOLookBack 0x70
#define bCFOSumWeight 0x80
#define bDAGCEnable 0x10000
#define bTXIQImb_A 0x3ff
#define bTXIQImb_B 0xfc00
#define bTXIQImb_C 0x3f0000
#define bTXIQImb_D 0xffc00000
#define bTxIDCOffset 0xff
#define bTxQDCOffset 0xff00
#define bTxDFIRMode 0x10000
#define bTxPesudoNoiseOn 0x4000000
#define bTxPesudoNoise_A 0xff
#define bTxPesudoNoise_B 0xff00
#define bTxPesudoNoise_C 0xff0000
#define bTxPesudoNoise_D 0xff000000
#define bCCADropOption 0x20000
#define bCCADropThres 0xfff00000
#define bEDCCA_H 0xf
#define bEDCCA_L 0xf0
#define bLambda_ED 0x300
#define bRxInitialGain 0x7f
#define bRxAntDivEn 0x80
#define bRxAGCAddressForLNA 0x7f00
#define bRxHighPowerFlow 0x8000
#define bRxAGCFreezeThres 0xc0000
#define bRxFreezeStep_AGC1 0x300000
#define bRxFreezeStep_AGC2 0xc00000
#define bRxFreezeStep_AGC3 0x3000000
#define bRxFreezeStep_AGC0 0xc000000
#define bRxRssi_Cmp_En 0x10000000
#define bRxQuickAGCEn 0x20000000
#define bRxAGCFreezeThresMode 0x40000000
#define bRxOverFlowCheckType 0x80000000
#define bRxAGCShift 0x7f
#define bTRSW_Tri_Only 0x80
#define bPowerThres 0x300
#define bRxAGCEn 0x1
#define bRxAGCTogetherEn 0x2
#define bRxAGCMin 0x4
#define bRxHP_Ini 0x7
#define bRxHP_TRLNA 0x70
#define bRxHP_RSSI 0x700
#define bRxHP_BBP1 0x7000
#define bRxHP_BBP2 0x70000
#define bRxHP_BBP3 0x700000
#define bRSSI_H 0x7f0000 /* the threshold for high power */
#define bRSSI_Gen 0x7f000000 /* the threshold for ant divers */
#define bRxSettle_TRSW 0x7
#define bRxSettle_LNA 0x38
#define bRxSettle_RSSI 0x1c0
#define bRxSettle_BBP 0xe00
#define bRxSettle_RxHP 0x7000
#define bRxSettle_AntSW_RSSI 0x38000
#define bRxSettle_AntSW 0xc0000
#define bRxProcessTime_DAGC 0x300000
#define bRxSettle_HSSI 0x400000
#define bRxProcessTime_BBPPW 0x800000
#define bRxAntennaPowerShift 0x3000000
#define bRSSITableSelect 0xc000000
#define bRxHP_Final 0x7000000
#define bRxHTSettle_BBP 0x7
#define bRxHTSettle_HSSI 0x8
#define bRxHTSettle_RxHP 0x70
#define bRxHTSettle_BBPPW 0x80
#define bRxHTSettle_Idle 0x300
#define bRxHTSettle_Reserved 0x1c00
#define bRxHTRxHPEn 0x8000
#define bRxHTAGCFreezeThres 0x30000
#define bRxHTAGCTogetherEn 0x40000
#define bRxHTAGCMin 0x80000
#define bRxHTAGCEn 0x100000
#define bRxHTDAGCEn 0x200000
#define bRxHTRxHP_BBP 0x1c00000
#define bRxHTRxHP_Final 0xe0000000
#define bRxPWRatioTH 0x3
#define bRxPWRatioEn 0x4
#define bRxMFHold 0x3800
#define bRxPD_Delay_TH1 0x38
#define bRxPD_Delay_TH2 0x1c0
#define bRxPD_DC_COUNT_MAX 0x600
#define bRxPD_Delay_TH 0x8000
#define bRxProcess_Delay 0xf0000
#define bRxSearchrange_GI2_Early 0x700000
#define bRxFrame_Guard_Counter_L 0x3800000
#define bRxSGI_Guard_L 0xc000000
#define bRxSGI_Search_L 0x30000000
#define bRxSGI_TH 0xc0000000
#define bDFSCnt0 0xff
#define bDFSCnt1 0xff00
#define bDFSFlag 0xf0000
#define bMFWeightSum 0x300000
#define bMinIdxTH 0x7f000000
#define bDAFormat 0x40000
#define bTxChEmuEnable 0x01000000
#define bTRSWIsolation_A 0x7f
#define bTRSWIsolation_B 0x7f00
#define bTRSWIsolation_C 0x7f0000
#define bTRSWIsolation_D 0x7f000000
#define bExtLNAGain 0x7c00
/* 6. PageE(0xE00) */
#define bSTBCEn 0x4 /* Useless */
#define bAntennaMapping 0x10
#define bNss 0x20
#define bCFOAntSumD 0x200
#define bPHYCounterReset 0x8000000
#define bCFOReportGet 0x4000000
#define bOFDMContinueTx 0x10000000
#define bOFDMSingleCarrier 0x20000000
#define bOFDMSingleTone 0x40000000
#define bHTDetect 0x100
#define bCFOEn 0x10000
#define bCFOValue 0xfff00000
#define bSigTone_Re 0x3f
#define bSigTone_Im 0x7f00
#define bCounter_CCA 0xffff
#define bCounter_ParityFail 0xffff0000
#define bCounter_RateIllegal 0xffff
#define bCounter_CRC8Fail 0xffff0000
#define bCounter_MCSNoSupport 0xffff
#define bCounter_FastSync 0xffff
#define bShortCFO 0xfff
#define bShortCFOTLength 12 /* total */
#define bShortCFOFLength 11 /* fraction */
#define bLongCFO 0x7ff
#define bLongCFOTLength 11
#define bLongCFOFLength 11
#define bTailCFO 0x1fff
#define bTailCFOTLength 13
#define bTailCFOFLength 12
#define bmax_en_pwdB 0xffff
#define bCC_power_dB 0xffff0000
#define bnoise_pwdB 0xffff
#define bPowerMeasTLength 10
#define bPowerMeasFLength 3
#define bRx_HT_BW 0x1
#define bRxSC 0x6
#define bRx_HT 0x8
#define bNB_intf_det_on 0x1
#define bIntf_win_len_cfg 0x30
#define bNB_Intf_TH_cfg 0x1c0
#define bRFGain 0x3f
#define bTableSel 0x40
#define bTRSW 0x80
#define bRxSNR_A 0xff
#define bRxSNR_B 0xff00
#define bRxSNR_C 0xff0000
#define bRxSNR_D 0xff000000
#define bSNREVMTLength 8
#define bSNREVMFLength 1
#define bCSI1st 0xff
#define bCSI2nd 0xff00
#define bRxEVM1st 0xff0000
#define bRxEVM2nd 0xff000000
#define bSIGEVM 0xff
#define bPWDB 0xff00
#define bSGIEN 0x10000
#define bSFactorQAM1 0xf /* Useless */
#define bSFactorQAM2 0xf0
#define bSFactorQAM3 0xf00
#define bSFactorQAM4 0xf000
#define bSFactorQAM5 0xf0000
#define bSFactorQAM6 0xf0000
#define bSFactorQAM7 0xf00000
#define bSFactorQAM8 0xf000000
#define bSFactorQAM9 0xf0000000
#define bCSIScheme 0x100000
#define bNoiseLvlTopSet 0x3 /* Useless */
#define bChSmooth 0x4
#define bChSmoothCfg1 0x38
#define bChSmoothCfg2 0x1c0
#define bChSmoothCfg3 0xe00
#define bChSmoothCfg4 0x7000
#define bMRCMode 0x800000
#define bTHEVMCfg 0x7000000
#define bLoopFitType 0x1 /* Useless */
#define bUpdCFO 0x40
#define bUpdCFOOffData 0x80
#define bAdvUpdCFO 0x100
#define bAdvTimeCtrl 0x800
#define bUpdClko 0x1000
#define bFC 0x6000
#define bTrackingMode 0x8000
#define bPhCmpEnable 0x10000
#define bUpdClkoLTF 0x20000
#define bComChCFO 0x40000
#define bCSIEstiMode 0x80000
#define bAdvUpdEqz 0x100000
#define bUChCfg 0x7000000
#define bUpdEqz 0x8000000
#define bTxAGCRate18_06 0x7f7f7f7f /* Useless */
#define bTxAGCRate54_24 0x7f7f7f7f
#define bTxAGCRateMCS32 0x7f
#define bTxAGCRateCCK 0x7f00
#define bTxAGCRateMCS3_MCS0 0x7f7f7f7f
#define bTxAGCRateMCS7_MCS4 0x7f7f7f7f
#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f
#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f
/* Rx Pseduo noise */
#define bRxPesudoNoiseOn 0x20000000 /* Useless */
#define bRxPesudoNoise_A 0xff
#define bRxPesudoNoise_B 0xff00
#define bRxPesudoNoise_C 0xff0000
#define bRxPesudoNoise_D 0xff000000
#define bPesudoNoiseState_A 0xffff
#define bPesudoNoiseState_B 0xffff0000
#define bPesudoNoiseState_C 0xffff
#define bPesudoNoiseState_D 0xffff0000
/* 7. RF Register
* Zebra1
*/
#define bZebra1_HSSIEnable 0x8 /* Useless */
#define bZebra1_TRxControl 0xc00
#define bZebra1_TRxGainSetting 0x07f
#define bZebra1_RxCorner 0xc00
#define bZebra1_TxChargePump 0x38
#define bZebra1_RxChargePump 0x7
#define bZebra1_ChannelNum 0xf80
#define bZebra1_TxLPFBW 0x400
#define bZebra1_RxLPFBW 0x600
/*Zebra4 */
#define bRTL8256RegModeCtrl1 0x100 /* Useless */
#define bRTL8256RegModeCtrl0 0x40
#define bRTL8256_TxLPFBW 0x18
#define bRTL8256_RxLPFBW 0x600
/* RTL8258 */
#define bRTL8258_TxLPFBW 0xc /* Useless */
#define bRTL8258_RxLPFBW 0xc00
#define bRTL8258_RSSILPFBW 0xc0
/*
* Other Definition
*/
/* byte endable for sb_write */
#define bByte0 0x1 /* Useless */
#define bByte1 0x2
#define bByte2 0x4
#define bByte3 0x8
#define bWord0 0x3
#define bWord1 0xc
#define bDWord 0xf
/* for PutRegsetting & GetRegSetting BitMask */
#define bMaskByte0 0xff /* Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
#define bMaskByte1 0xff00
#define bMaskByte2 0xff0000
#define bMaskByte3 0xff000000
#define bMaskHWord 0xffff0000
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
/* for PutRFRegsetting & GetRFRegSetting BitMask */
#define bRFRegOffsetMask 0xfffff
#define bEnable 0x1 /* Useless */
#define bDisable 0x0
#define LeftAntenna 0x0 /* Useless */
#define RightAntenna 0x1
#define tCheckTxStatus 500 /* 500ms Useless */
#define tUpdateRxCounter 100 /* 100ms */
#define rateCCK 0 /* Useless */
#define rateOFDM 1
#define rateHT 2
/* define Register-End */
#define bPMAC_End 0x1ff /* Useless */
#define bFPGAPHY0_End 0x8ff
#define bFPGAPHY1_End 0x9ff
#define bCCKPHY0_End 0xaff
#define bOFDMPHY0_End 0xcff
#define bOFDMPHY1_End 0xdff
#define bPMACControl 0x0 /* Useless */
#define bWMACControl 0x1
#define bWNICControl 0x2
#define ANTENNA_A 0x1 /* Useless */
#define ANTENNA_B 0x2
#define ANTENNA_AB 0x3 /* ANTENNA_A |ANTENNA_B */
#define ANTENNA_C 0x4
#define ANTENNA_D 0x8
/* accept all physical address */
#define RCR_AAP BIT(0)
#define RCR_APM BIT(1) /* accept physical match */
#define RCR_AM BIT(2) /* accept multicast */
#define RCR_AB BIT(3) /* accept broadcast */
#define RCR_ACRC32 BIT(5) /* accept error packet */
#define RCR_9356SEL BIT(6)
#define RCR_AICV BIT(12) /* Accept ICV error packet */
#define RCR_RXFTH0 (BIT(13)|BIT(14)|BIT(15)) /* Rx FIFO threshold */
#define RCR_ADF BIT(18) /* Accept Data(frame type) frame */
#define RCR_ACF BIT(19) /* Accept control frame */
#define RCR_AMF BIT(20) /* Accept management frame */
#define RCR_ADD3 BIT(21)
#define RCR_APWRMGT BIT(22) /* Accept power management packet */
#define RCR_CBSSID BIT(23) /* Accept BSSID match packet */
#define RCR_ENMARP BIT(28) /* enable mac auto reset phy */
#define RCR_EnCS1 BIT(29) /* enable carrier sense method 1 */
#define RCR_EnCS2 BIT(30) /* enable carrier sense method 2 */
/* Rx Early mode is performed for packet size greater than 1536 */
#define RCR_OnlyErlPkt BIT(31)
/*--------------------------Define Parameters-------------------------------*/
#endif /*__INC_HAL8192SPHYREG_H */
|