/*
* Probe module for 8250/16550-type PCI serial ports.
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
#include <linux/8250_pci.h>
#include <linux/bitops.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include "8250.h"
/*
* init function returns:
* > 0 - number of ports
* = 0 - use board->num_ports
* < 0 - error
*/
struct pci_serial_quirk {
u32 vendor;
u32 device;
u32 subvendor;
u32 subdevice;
int (*probe)(struct pci_dev *dev);
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *,
const struct pciserial_board *,
struct uart_8250_port *, int);
void (*exit)(struct pci_dev *dev);
};
#define PCI_NUM_BAR_RESOURCES 6
struct serial_private {
struct pci_dev *dev;
unsigned int nr;
void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
struct pci_serial_quirk *quirk;
int line[0];
};
static int pci_default_setup(struct serial_private*,
const struct pciserial_board*, struct uart_8250_port *, int);
static void moan_device(const char *str, struct pci_dev *dev)
{
dev_err(&dev->dev,
"%s: %s\n"
"Please send the output of lspci -vv, this\n"
"message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
"manufacturer and name of serial board or\n"
"modem board to rmk+serial@arm.linux.org.uk.\n",
pci_name(dev), str, dev->vendor, dev->device,
dev->subsystem_vendor, dev->subsystem_device);
}
static int
setup_port(struct serial_private *priv, struct uart_8250_port *port,
int bar, int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
unsigned long base, len;
if (bar >= PCI_NUM_BAR_RESOURCES)
return -EINVAL;
base = pci_resource_start(dev, bar);
if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
len = pci_resource_len(dev, bar);
if (!priv->remapped_bar[bar])
priv->remapped_bar[bar] = ioremap_nocache(base, len);
if (!priv->remapped_bar[bar])
return -ENOMEM;
port->port.iotype = UPIO_MEM;
port->port.iobase = 0;
port->port.mapbase = base + offset;
port->port.membase = priv->remapped_bar[bar] + offset;
port->port.regshift = regshift;
} else {
port->port.iotype = UPIO_PORT;
port->port.iobase = base + offset;
port->port.mapbase = 0;
port->port.membase = NULL;
port->port.regshift = 0;
}
return 0;
}
/*
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
static int addidata_apci7800_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
bar = FL_GET_BASE(board->flags);
if (idx < 2) {
offset += idx * board->uart_offset;
} else if ((idx >= 2) && (idx < 4)) {
bar += 1;
offset += ((idx - 2) * board->uart_offset);
} else if ((idx >= 4) && (idx < 6)) {
bar += 2;
offset += ((idx - 4) * board->uart_offset);
} else if (idx >= 6) {
bar += 3;
offset += ((idx - 6) * board->uart_offset);
}
return setup_port(priv, port, bar, offset, board->reg_shift);
}
/*
* AFAVLAB uses a different mixture of BARs and offsets
* Not that ugly ;) -- HW
*/
static int
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
bar = FL_GET_BASE(board->flags);
if (idx < 4)
bar += idx;
else {
bar = 4;
offset += (idx - 4) * board->uart_offset;
}
return setup_port(priv, port, bar, offset, board->reg_shift);
}
/*
* HP's Remote Management Console. The Diva chip came in several
* different versions. N-class, L2000 and A500 have two Diva chips, each
* with 3 UARTs (the third UART on the second chip is unused). Superdome
* and Keystone have one Diva chip with 3 UARTs. Some later machines have
* one Diva chip, but it has been expanded to 5 UARTs.
*/
static int pci_hp_diva_init(struct pci_dev *dev)
{
int rc = 0;
switch (dev->subsystem_device) {
case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
rc = 3;
break;
case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
rc = 2;
break;
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
rc = 4;
break;
case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
rc = 1;
break;
}
return rc;
}
/*
* HP's Diva chip puts the 4th/5th serial port further out, and
* some serial ports are supposed to be hidden on certain models.
*/
static int
pci_hp_diva_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
switch (priv->dev->subsystem_device) {
case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
if (idx == 3)
idx++;
break;
case PCI_DEVICE_ID_HP_DIVA_EVEREST:
if (idx > 0)
idx++;
if (idx > 2)
idx++;
break;
}
if (idx > 2)
offset = 0x18;
offset += idx * board->uart_offset;
return setup_port(priv, port, bar, offset, board->reg_shift);
}
/*
* Added for EKF Intel i960 serial boards
*/
static int pci_inteli960ni_init(struct pci_dev *dev)
{
unsigned long oldval;
if (!(dev->subsystem_device & 0x1000))
return -ENODEV;
/* is firmware started? */
pci_read_config_dword(dev, 0x44, (void *)&oldval);
if (oldval == 0x00001000L) { /* RESET value */
dev_dbg(&dev->dev, "Local i960 firmware missing\n");
return -ENODEV;
}
return 0;
}
/*
* Some PCI serial cards using the PLX 9050 PCI interface chip require
* that the card interrupt be explicitly enabled or disabled. This
* seems to be mainly needed on card using the PLX which also use I/O
* mapped memory.
*/
static int pci_plx9050_init(struct pci_dev *dev)
{
u8 irq_config;
void __iomem *p;
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
moan_device("no memory in bar 0", dev);
return 0;
}
irq_config = 0x41;
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
irq_config = 0x43;
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
/*
* As the megawolf cards have the int pins active
* high, and have 2 UART chips, both ints must be
* enabled on the 9050. Also, the UARTS are set in
* 16450 mode by default, so we have to enable the
* 16C950 'enhanced' mode so that we can use the
* deep FIFOs
*/
irq_config = 0x5b;
/*
* enable/disable interrupts
*/
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
writel(irq_config, p + 0x4c);
/*
* Read the register back to ensure that it took effect.
*/
readl(p + 0x4c);
iounmap(p);
return 0;
}
static void pci_plx9050_exit(struct pci_dev *dev)
{
u8 __iomem *p;
if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
return;
/*
* disable interrupts
*/
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p != NULL) {
writel(0, p + 0x4c);
/*
* Read the register back to ensure that it took effect.
*/
readl(p + 0x4c);
iounmap(p);
}
}
#define NI8420_INT_ENABLE_REG 0x38
#define NI8420_INT_ENABLE_BIT 0x2000
static void pci_ni8420_exit(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
unsigned int bar = 0;
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
moan_device("no memory in bar", dev);
return;
}
base = pci_resource_start(dev, bar);
len = pci_resource_len(dev, bar);
p = ioremap_nocache(base, len);
if (p == NULL)
return;
/* Disable the CPU Interrupt */
writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT),
p + NI8420_INT_ENABLE_REG);
iounmap(p);
}
/* MITE registers */
#define MITE_IOWBSR1 0xc4
#define MITE_IOWCR1 0xf4
#define MITE_LCIMR1 0x08
#define MITE_LCIMR2 0x10
#define MITE_LCIMR2_CLR_CPU_IE (1 << 30)
static void pci_ni8430_exit(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
unsigned int bar = 0;
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
moan_device("no memory in bar", dev);
return;
}
base = pci_resource_start(dev, bar);
len = pci_resource_len(dev, bar);
p = ioremap_nocache(base, len);
if (p == NULL)
return;
/* Disable the CPU Interrupt */
writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2);
iounmap(p);
}
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
bar = 0;
if (idx < 4) {
/* first four channels map to 0, 0x100, 0x200, 0x300 */
offset += idx * board->uart_offset;
} else if (idx < 8) {
/* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
offset += idx * board->uart_offset + 0xC00;
} else /* we have only 8 ports on PMC-OCTALPRO */
return 1;
return setup_port(priv, port, bar, offset, board->reg_shift);
}
/*
* This does initialization for PMC OCTALPRO cards:
* maps the device memory, resets the UARTs (needed, bc
* if the module is removed and inserted again, the card
* is in the sleep mode) and enables global interrupt.
*/
/* global control register offset for SBS PMC-OctalPro */
#define OCT_REG_CR_OFF 0x500
static int sbs_init(struct pci_dev *dev)
{
u8 __iomem *p;
p = pci_ioremap_bar(dev, 0);
if (p == NULL)
return -ENOMEM;
/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
writeb(0x10, p + OCT_REG_CR_OFF);
udelay(50);
writeb(0x0, p + OCT_REG_CR_OFF);
/* Set bit-2 (INTENABLE) of Control Register */
writeb(0x4, p + OCT_REG_CR_OFF);
iounmap(p);
return 0;
}
/*
* Disables the global interrupt of PMC-OctalPro
*/
static void sbs_exit(struct pci_dev *dev)
{
u8 __iomem *p;
p = pci_ioremap_bar(dev, 0);
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
iounmap(p);
}
/*
* SIIG serial cards have an PCI interface chip which also controls
* the UART clocking frequency. Each UART can be clocked independently
* (except cards equipped with 4 UARTs) and initial clocking settings
* are stored in the EEPROM chip. It can cause problems because this
* version of serial driver doesn't support differently clocked UART's
* on single PCI card. To prevent this, initialization functions set
* high frequency clocking for all UART's on given card. It is safe (I
* hope) because it doesn't touch EEPROM settings to prevent conflicts
* with other OSes (like M$ DOS).
*
* SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
*
* There is two family of SIIG serial cards with different PCI
* interface chip and different configuration methods:
* - 10x cards have control registers in IO and/or memory space;
* - 20x cards have control registers in standard PCI configuration space.
*
* Note: all 10x cards have PCI device ids 0x10..
* all 20x cards have PCI device ids 0x20..
*
* There are also Quartet Serial cards which use Oxford Semiconductor
* 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
*
* Note: some SIIG cards are probed by the parport_serial object.
*/
#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
static int pci_siig10x_init(struct pci_dev *dev)
{
u16 data;
void __iomem *p;
switch (dev->device & 0xfff8) {
case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
data = 0xffdf;
break;
case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
data = 0xf7ff;
break;
default: /* 1S1P, 4S */
data = 0xfffb;
break;
}
p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
writew(readw(p + 0x28) & data, p + 0x28);
readw(p + 0x28);
iounmap(p);
return 0;
}
#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
static int pci_siig20x_init(struct pci_dev *dev)
{
u8 data;
/* Change clock frequency for the first UART. */
pci_read_config_byte(dev, 0x6f, &data);
pci_write_config_byte(dev, 0x6f, data & 0xef);
/* If this card has 2 UART, we have to do the same with second UART. */
if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
pci_read_config_byte(dev, 0x73, &data);
pci_write_config_byte(dev, 0x73, data & 0xef);
}
return 0;
}
static int pci_siig_init(struct pci_dev *dev)
{
unsigned int type = dev->device & 0xff00;
if (type == 0x1000)
return pci_siig10x_init(dev);
else if (type == 0x2000)
return pci_siig20x_init(dev);
moan_device("Unknown SIIG card", dev);
return -ENODEV;
}
static int pci_siig_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
if (idx > 3) {
bar = 4;
offset = (idx - 4) * 8;
}
return setup_port(priv, port, bar, offset, 0);
}
/*
* Timedia has an explosion of boards, and to avoid the PCI table from
* growing *huge*, we use this function to collapse some 70 entries
* in the PCI table into one, for sanity's and compactness's sake.
*/
static const unsigned short timedia_single_port[] = {
0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
};
static const unsigned short timedia_dual_port[] = {
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
0xD079, 0
};
static const unsigned short timedia_quad_port[] = {
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
0xB157, 0
};
static const unsigned short timedia_eight_port[] = {
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
};
static const struct timedia_struct {
int num;
const unsigned short *ids;
} timedia_data[] = {
{ 1, timedia_single_port },
{ 2, timedia_dual_port },
{ 4, timedia_quad_port },
{ 8, timedia_eight_port }
};
/*
* There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
* listing them individually, this driver merely grabs them all with
* PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
* and should be left free to be claimed by parport_serial instead.
*/
static int pci_timedia_probe(struct pci_dev *dev)
{
/*
* Check the third digit of the subdevice ID
* (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
*/
if ((dev->subsystem_device & 0x00f0) >= 0x70) {
dev_info(&dev->dev,
"ignoring Timedia subdevice %04x for parport_serial\n",
dev->subsystem_device);
return -ENODEV;
}
return 0;
}
static int pci_timedia_init(struct pci_dev *dev)
{
const unsigned short *ids;
int i, j;
for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
ids = timedia_data[i].ids;
for (j = 0; ids[j]; j++)
if (dev->subsystem_device == ids[j])
return timedia_data[i].num;
}
return 0;
}
/*
* Timedia/SUNIX uses a mixture of BARs and offsets
* Ugh, this is ugly as all hell --- TYT
*/
static int
pci_timedia_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
switch (idx) {
case 0:
bar = 0;
break;
case 1:
offset = board->uart_offset;
bar = 0;
break;
case 2:
bar = 1;
break;
case 3:
offset = board->uart_offset;
/* FALLTHROUGH */
case 4: /* BAR 2 */
case 5: /* BAR 3 */
case 6: /* BAR 4 */
case 7: /* BAR 5 */
bar = idx - 2;
}
return setup_port(priv, port, bar, offset, board->reg_shift);
}
/*
* Some Titan cards are also a little weird
*/
static int
titan_400l_800l_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
switch (idx) {
case 0:
bar = 1;
break;
case 1:
bar = 2;
break;
default:
bar = 4;
offset = (idx - 2) * board->uart_offset;
}
return setup_port(priv, port, bar, offset, board->reg_shift);
}
static int pci_xircom_init(struct pci_dev *dev)
{
msleep(100);
return 0;
}
static int pci_ni8420_init(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
unsigned int bar = 0;
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
moan_device("no memory in bar", dev);
return 0;
}
base = pci_resource_start(dev, bar);
len = pci_resource_len(dev, bar);
p = ioremap_nocache(base, len);
if (p == NULL)
return -ENOMEM;
/* Enable CPU Interrupt */
writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT,
p + NI8420_INT_ENABLE_REG);
iounmap(p);
return 0;
}
#define MITE_IOWBSR1_WSIZE 0xa
#define MITE_IOWBSR1_WIN_OFFSET 0x800
#define MITE_IOWBSR1_WENAB (1 << 7)
#define MITE_LCIMR1_IO_IE_0 (1 << 24)
#define MITE_LCIMR2_SET_CPU_IE (1 << 31)
#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe
static int pci_ni8430_init(struct pci_dev *dev)
{
void __iomem *p;
unsigned long base, len;
u32 device_window;
unsigned int bar = 0;
if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) {
moan_device("no memory in bar", dev);
return 0;
}
base = pci_resource_start(dev, bar);
len = pci_resource_len(dev, bar);
p = ioremap_nocache(base, len);
if (p == NULL)
return -ENOMEM;
/* Set device window address and size in BAR0 */
device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
writel(device_window, p + MITE_IOWBSR1);
/* Set window access to go to RAMSEL IO address space */
writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK),
p + MITE_IOWCR1);
/* Enable IO Bus Interrupt 0 */
writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1);
/* Enable CPU Interrupt */
writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2);
iounmap(p);
return 0;
}
/* UART Port Control Register */
#define NI8430_PORTCON 0x0f
#define NI8430_PORTCON_TXVR_ENABLE (1 << 3)
static int
pci_ni8430_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
void __iomem *p;
unsigned long base, len;
unsigned int bar, offset = board->first_offset;
if (idx >= board->num_ports)
return 1;
bar = FL_GET_BASE(board->flags);
offset += idx * board->uart_offset;
base = pci_resource_start(priv->dev, bar);
len = pci_resource_len(priv->dev, bar);
p = ioremap_nocache(base, len);
/* enable the transceiver */
writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
p + offset + NI8430_PORTCON);
iounmap(p);
return setup_port(priv, port, bar, offset, board->reg_shift);
}
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar;
if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
/* netmos apparently orders BARs by datasheet layout, so serial
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
*/
bar = 3 * idx;
return setup_port(priv, port, bar, 0, board->reg_shift);
} else {
return pci_default_setup(priv, board, port, idx);
}
}
/* the 99xx series comes with a range of device IDs and a variety
* of capabilities:
*
* 9900 has varying capabilities and can cascade to sub-controllers
* (cascading should be purely internal)
* 9904 is hardwired with 4 serial ports
* 9912 and 9922 are hardwired with 2 serial ports
*/
static int pci_netmos_9900_numports(struct pci_dev *dev)
{
unsigned int c = dev->class;
unsigned int pi;
unsigned short sub_serports;
pi = (c & 0xff);
if (pi == 2) {
return 1;
} else if ((pi == 0) &&
(dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
/* two possibilities: 0x30ps encodes number of parallel and
* serial ports, or 0x1000 indicates *something*. This is not
* immediately obvious, since the 2s1p+4s configuration seems
* to offer all functionality on functions 0..2, while still
* advertising the same function 3 as the 4s+2s1p config.
*/
sub_serports = dev->subsystem_device & 0xf;
if (sub_serports > 0) {
return sub_serports;
} else {
dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
return 0;
}
}
moan_device("unknown NetMos/Mostech program interface", dev);
return 0;
}
static int pci_netmos_init(struct pci_dev *dev)
{
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
(dev->device == PCI_DEVICE_ID_NETMOS_9865))
return 0;
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
switch (dev->device) { /* FALLTHROUGH on all */
case PCI_DEVICE_ID_NETMOS_9904:
case PCI_DEVICE_ID_NETMOS_9912:
case PCI_DEVICE_ID_NETMOS_9922:
case PCI_DEVICE_ID_NETMOS_9900:
num_serial = pci_netmos_9900_numports(dev);
break;
default:
if (num_serial == 0 ) {
moan_device("unknown NetMos/Mostech device", dev);
}
}
if (num_serial == 0)
return -ENODEV;
return num_serial;
}
/*
* These chips are available with optionally one parallel port and up to
* two serial ports. Unfortunately they all have the same product id.
*
* Basic configuration is done over a region of 32 I/O ports. The base
* ioport is called INTA or INTC, depending on docs/other drivers.
*
* The region of the 32 I/O ports is configured in POSIO0R...
*/
/* registers */
#define ITE_887x_MISCR 0x9c
#define ITE_887x_INTCBAR 0x78
#define ITE_887x_UARTBAR 0x7c
#define ITE_887x_PS0BAR 0x10
#define ITE_887x_POSIO0 0x60
/* I/O space size */
#define ITE_887x_IOSIZE 32
/* I/O space size (bits 26-24; 8 bytes = 011b) */
#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
/* I/O space size (bits 26-24; 32 bytes = 101b) */
#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
#define ITE_887x_POSIO_SPEED (3 << 29)
/* enable IO_Space bit */
#define ITE_887x_POSIO_ENABLE (1 << 31)
static int pci_ite887x_init(struct pci_dev *dev)
{
/* inta_addr are the configuration addresses of the ITE */
static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
0x200, 0x280, 0 };
int ret, i, type;
struct resource *iobase = NULL;
u32 miscr, uartbar, ioport;
/* search for the base-ioport */
i = 0;
while (inta_addr[i] && iobase == NULL) {
iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
"ite887x");
if (iobase != NULL) {
/* write POSIO0R - speed | size | ioport */
pci_write_config_dword(dev, ITE_887x_POSIO0,
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
/* write INTCBAR - ioport */
pci_write_config_dword(dev, ITE_887x_INTCBAR,
inta_addr[i]);
ret = inb(inta_addr[i]);
if (ret != 0xff) {
/* ioport connected */
break;
}
release_region(iobase->start, ITE_887x_IOSIZE);
iobase = NULL;
}
i++;
}
if (!inta_addr[i]) {
dev_err(&dev->dev, "ite887x: could not find iobase\n");
return -ENODEV;
}
/* start of undocumented type checking (see parport_pc.c) */
type = inb(iobase->start + 0x18) & 0x0f;
switch (type) {
case 0x2: /* ITE8871 (1P) */
case 0xa: /* ITE8875 (1P) */
ret = 0;
break;
case 0xe: /* ITE8872 (2S1P) */
ret = 2;
break;
case 0x6: /* ITE8873 (1S) */
ret = 1;
break;
case 0x8: /* ITE8874 (2S) */
ret = 2;
break;
default:
moan_device("Unknown ITE887x", dev);
ret = -ENODEV;
}
/* configure all serial ports */
for (i = 0; i < ret; i++) {
/* read the I/O port from the device */
pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
&ioport);
ioport &= 0x0000FF00; /* the actual base address */
pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
ITE_887x_POSIO_IOSIZE_8 | ioport);
/* write the ioport to the UARTBAR */
pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
uartbar |= (ioport << (16 * i)); /* set the ioport */
pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
/* get current config */
pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
/* disable interrupts (UARTx_Routing[3:0]) */
miscr &= ~(0xf << (12 - 4 * i));
/* activate the UART (UARTx_En) */
miscr |= 1 << (23 - i);
/* write new config with activated UART */
pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
}
if (ret <= 0) {
/* the device has no UARTs if we get here */
release_region(iobase->start, ITE_887x_IOSIZE);
}
return ret;
}
static void pci_ite887x_exit(struct pci_dev *dev)
{
u32 ioport;
/* the ioport is bit 0-15 in POSIO0R */
pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
ioport &= 0xffff;
release_region(ioport, ITE_887x_IOSIZE);
}
/*
* Oxford Semiconductor Inc.
* Check that device is part of the Tornado range of devices, then determine
* the number of ports available on the device.
*/
static int pci_oxsemi_tornado_init(struct pci_dev *dev)
{
u8 __iomem *p;
unsigned long deviceID;
unsigned int number_uarts = 0;
/* OxSemi Tornado devices are all 0xCxxx */
if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
(dev->device & 0xF000) != 0xC000)
return 0;
p = pci_iomap(dev, 0, 5);
if (p == NULL)
return -ENOMEM;
deviceID = ioread32(p);
/* Tornado device */
if (deviceID == 0x07000200) {
number_uarts = ioread8(p + 4);
dev_dbg(&dev->dev,
"%d ports detected on Oxford PCI Express device\n",
number_uarts);
}
pci_iounmap(dev, p);
return number_uarts;
}
static int pci_asix_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->bugs |= UART_BUG_PARITY;
return pci_default_setup(priv, board, port, idx);
}
/* Quatech devices have their own extra interface features */
struct quatech_feature {
u16 devid;
bool amcc;
};
#define QPCR_TEST_FOR1 0x3F
#define QPCR_TEST_GET1 0x00
#define QPCR_TEST_FOR2 0x40
#define QPCR_TEST_GET2 0x40
#define QPCR_TEST_FOR3 0x80
#define QPCR_TEST_GET3 0x40
#define QPCR_TEST_FOR4 0xC0
#define QPCR_TEST_GET4 0x80
#define QOPR_CLOCK_X1 0x0000
#define QOPR_CLOCK_X2 0x0001
#define QOPR_CLOCK_X4 0x0002
#define QOPR_CLOCK_X8 0x0003
#define QOPR_CLOCK_RATE_MASK 0x0003
static struct quatech_feature quatech_cards[] = {
{ PCI_DEVICE_ID_QUATECH_QSC100, 1 },
{ PCI_DEVICE_ID_QUATECH_DSC100, 1 },
{ PCI_DEVICE_ID_QUATECH_DSC100E, 0 },
{ PCI_DEVICE_ID_QUATECH_DSC200, 1 },
{ PCI_DEVICE_ID_QUATECH_DSC200E, 0 },
{ PCI_DEVICE_ID_QUATECH_ESC100D, 1 },
{ PCI_DEVICE_ID_QUATECH_ESC100M, 1 },
{ PCI_DEVICE_ID_QUATECH_QSCP100, 1 },
{ PCI_DEVICE_ID_QUATECH_DSCP100, 1 },
{ PCI_DEVICE_ID_QUATECH_QSCP200, 1 },
{ PCI_DEVICE_ID_QUATECH_DSCP200, 1 },
{ PCI_DEVICE_ID_QUATECH_ESCLP100, 0 },
{ PCI_DEVICE_ID_QUATECH_QSCLP100, 0 },
{ PCI_DEVICE_ID_QUATECH_DSCLP100, 0 },
{ PCI_DEVICE_ID_QUATECH_SSCLP100, 0 },
{ PCI_DEVICE_ID_QUATECH_QSCLP200, 0 },
{ PCI_DEVICE_ID_QUATECH_DSCLP200, 0 },
{ PCI_DEVICE_ID_QUATECH_SSCLP200, 0 },
{ PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 },
{ 0, }
};
static int pci_quatech_amcc(u16 devid)
{
struct quatech_feature *qf = &quatech_cards[0];
while (qf->devid) {
if (qf->devid == devid)
return qf->amcc;
qf++;
}
pr_err("quatech: unknown port type '0x%04X'.\n", devid);
return 0;
};
static int pci_quatech_rqopr(struct uart_8250_port *port)
{
unsigned long base = port->port.iobase;
u8 LCR, val;
LCR = inb(base + UART_LCR);
outb(0xBF, base + UART_LCR);
val = inb(base + UART_SCR);
outb(LCR, base + UART_LCR);
return val;
}
static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
{
unsigned long base = port->port.iobase;
u8 LCR, val;
LCR = inb(base + UART_LCR);
outb(0xBF, base + UART_LCR);
val = inb(base + UART_SCR);
outb(qopr, base + UART_SCR);
outb(LCR, base + UART_LCR);
}
static int pci_quatech_rqmcr(struct uart_8250_port *port)
{
unsigned long base = port->port.iobase;
u8 LCR, val, qmcr;
LCR = inb(base + UART_LCR);
outb(0xBF, base + UART_LCR);
val = inb(base + UART_SCR);
outb(val | 0x10, base + UART_SCR);
qmcr = inb(base + UART_MCR);
outb(val, base + UART_SCR);
outb(LCR, base + UART_LCR);
return qmcr;
}
static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr)
{
unsigned long base = port->port.iobase;
u8 LCR, val;
LCR = inb(base + UART_LCR);
outb(0xBF, base + UART_LCR);
val = inb(base + UART_SCR);
outb(val | 0x10, base + UART_SCR);
outb(qmcr, base + UART_MCR);
outb(val, base + UART_SCR);
outb(LCR, base + UART_LCR);
}
static int pci_quatech_has_qmcr(struct uart_8250_port *port)
{
unsigned long base = port->port.iobase;
u8 LCR, val;
LCR = inb(base + UART_LCR);
outb(0xBF, base + UART_LCR);
val = inb(base + UART_SCR);
if (val & 0x20) {
outb(0x80, UART_LCR);
if (!(inb(UART_SCR) & 0x20)) {
outb(LCR, base + UART_LCR);
return 1;
}
}
return 0;
}
static int pci_quatech_test(struct uart_8250_port *port)
{
u8 reg;
u8 qopr = pci_quatech_rqopr(port);
pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET1)
return -EINVAL;
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET2)
return -EINVAL;
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET3)
return -EINVAL;
pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET4)
return -EINVAL;
pci_quatech_wqopr(port, qopr);
return 0;
}
static int pci_quatech_clock(struct uart_8250_port *port)
{
u8 qopr, reg, set;
unsigned long clock;
if (pci_quatech_test(port) < 0)
return 1843200;
qopr = pci_quatech_rqopr(port);
pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8);
reg = pci_quatech_rqopr(port);
if (reg & QOPR_CLOCK_X8) {
clock = 1843200;
goto out;
}
pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8);
reg = pci_quatech_rqopr(port);
if (!(reg & QOPR_CLOCK_X8)) {
clock = 1843200;
goto out;
}
reg &= QOPR_CLOCK_X8;
if (reg == QOPR_CLOCK_X2) {
clock = 3685400;
set = QOPR_CLOCK_X2;
} else if (reg == QOPR_CLOCK_X4) {
clock = 7372800;
set = QOPR_CLOCK_X4;
} else if (reg == QOPR_CLOCK_X8) {
clock = 14745600;
set = QOPR_CLOCK_X8;
} else {
clock = 1843200;
set = QOPR_CLOCK_X1;
}
qopr &= ~QOPR_CLOCK_RATE_MASK;
qopr |= set;
out:
pci_quatech_wqopr(port, qopr);
return clock;
}
static int pci_quatech_rs422(struct uart_8250_port *port)
{
u8 qmcr;
int rs422 = 0;
if (!pci_quatech_has_qmcr(port))
return 0;
qmcr = pci_quatech_rqmcr(port);
pci_quatech_wqmcr(port, 0xFF);
if (pci_quatech_rqmcr(port))
rs422 = 1;
pci_quatech_wqmcr(port, qmcr);
return rs422;
}
static int pci_quatech_init(struct pci_dev *dev)
{
if (pci_quatech_amcc(dev->device)) {
unsigned long base = pci_resource_start(dev, 0);
if (base) {
u32 tmp;
outl(inl(base + 0x38) | 0x00002000, base + 0x38);
tmp = inl(base + 0x3c);
outl(tmp | 0x01000000, base + 0x3c);
outl(tmp &= ~0x01000000, base + 0x3c);
}
}
return 0;
}
static int pci_quatech_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
/* Needed by pci_quatech calls below */
port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags));
/* Set up the clocking */
port->port.uartclk = pci_quatech_clock(port);
/* For now just warn about RS422 */
if (pci_quatech_rs422(port))
pr_warn("quatech: software control of RS422 features not currently supported.\n");
return pci_default_setup(priv, board, port, idx);
}
static void pci_quatech_exit(struct pci_dev *dev)
{
}
static int pci_default_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
bar = FL_GET_BASE(board->flags);
if (board->flags & FL_BASE_BARS)
bar += idx;
else
offset += idx * board->uart_offset;
maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
(board->reg_shift + 3);
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
return 1;
return setup_port(priv, port, bar, offset, board->reg_shift);
}
static int pci_pericom_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
bar = FL_GET_BASE(board->flags);
if (board->flags & FL_BASE_BARS)
bar += idx;
else
offset += idx * board->uart_offset;
maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
(board->reg_shift + 3);
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
return 1;
port->port.uartclk = 14745600;
return setup_port(priv, port, bar, offset, board->reg_shift);
}
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
int ret;
ret = setup_port(priv, port, idx, 0, board->reg_shift);
port->port.iotype = UPIO_MEM32;
port->port.type = PORT_XSCALE;
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
port->port.regshift = 2;
return ret;
}
#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
#define BYT_PRV_CLK 0x800
#define BYT_PRV_CLK_EN (1 << 0)
#define BYT_PRV_CLK_M_VAL_SHIFT 1
#define BYT_PRV_CLK_N_VAL_SHIFT 16
#define BYT_PRV_CLK_UPDATE (1 << 31)
#define BYT_GENERAL_REG 0x808
#define BYT_GENERAL_DIS_RTS_N_OVERRIDE (1 << 3)
#define BYT_TX_OVF_INT 0x820
#define BYT_TX_OVF_INT_MASK (1 << 1)
static void
byt_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = tty_termios_baud_rate(termios);
unsigned int m = 6912;
unsigned int n = 15625;
u32 reg;
/* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
m = 64;
n = 100;
p->uartclk = 64000000;
} else if (baud == 3000000) {
m = 48;
n = 100;
p->uartclk = 48000000;
} else {
p->uartclk = 44236800;
}
/* Reset the clock */
reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
writel(reg, p->membase + BYT_PRV_CLK);
reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
writel(reg, p->membase + BYT_PRV_CLK);
/*
* If auto-handshake mechanism is not enabled,
* disable rts_n override
*/
reg = readl(p->membase + BYT_GENERAL_REG);
reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE;
if (termios->c_cflag & CRTSCTS)
reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE;
writel(reg, p->membase + BYT_GENERAL_REG);
serial8250_do_set_termios(p, termios, old);
}
static bool byt_dma_filter(struct dma_chan *chan, void *param)
{
return chan->chan_id == *(int *)param;
}
static int
byt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
struct uart_8250_dma *dma;
int ret;
dma = devm_kzalloc(port->port.dev, sizeof(*dma), GFP_KERNEL);
if (!dma)
return -ENOMEM;
switch (priv->dev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
dma->rx_chan_id = 3;
dma->tx_chan_id = 2;
break;
case PCI_DEVICE_ID_INTEL_BYT_UART2:
dma->rx_chan_id = 5;
dma->tx_chan_id = 4;
break;
default:
return -EINVAL;
}
dma->rxconf.slave_id = dma->rx_chan_id;
dma->rxconf.src_maxburst = 16;
dma->txconf.slave_id = dma->tx_chan_id;
dma->txconf.dst_maxburst = 16;
dma->fn = byt_dma_filter;
dma->rx_param = &dma->rx_chan_id;
dma->tx_param = &dma->tx_chan_id;
ret = pci_default_setup(priv, board, port, idx);
port->port.iotype = UPIO_MEM;
port->port.type = PORT_16550A;
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
port->port.set_termios = byt_set_termios;
port->port.fifosize = 64;
port->tx_loadsz = 64;
port->dma = dma;
port->capabilities = UART_CAP_FIFO | UART_CAP_AFE;
/* Disable Tx counter interrupts */
writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT);
return ret;
}
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
}
static int
pci_brcm_trumanage_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
int ret = pci_default_setup(priv, board, port, idx);
port->port.type = PORT_BRCM_TRUMANAGE;
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
return ret;
}
static int pci_fintek_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
struct pci_dev *pdev = priv->dev;
unsigned long base;
unsigned long iobase;
unsigned long ciobase = 0;
u8 config_base;
/*
* We are supposed to be able to read these from the PCI config space,
* but the values there don't seem to match what we need to use, so
* just use these hard-coded values for now, as they are correct.
*/
switch (idx) {
case 0: iobase = 0xe000; config_base = 0x40; break;
case 1: iobase = 0xe008; config_base = 0x48; break;
case 2: iobase = 0xe010; config_base = 0x50; break;
case 3: iobase = 0xe018; config_base = 0x58; break;
case 4: iobase = 0xe020; config_base = 0x60; break;
case 5: iobase = 0xe028; config_base = 0x68; break;
case 6: iobase = 0xe030; config_base = 0x70; break;
case 7: iobase = 0xe038; config_base = 0x78; break;
case 8: iobase = 0xe040; config_base = 0x80; break;
case 9: iobase = 0xe048; config_base = 0x88; break;
case 10: iobase = 0xe050; config_base = 0x90; break;
case 11: iobase = 0xe058; config_base = 0x98; break;
default:
/* Unknown number of ports, get out of here */
return -EINVAL;
}
if (idx < 4) {
base = pci_resource_start(priv->dev, 3);
ciobase = (int)(base + (0x8 * idx));
}
dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
__func__, idx, iobase, ciobase, config_base);
/* Enable UART I/O port */
pci_write_config_byte(pdev, config_base + 0x00, 0x01);
/* Select 128-byte FIFO and 8x FIFO threshold */
pci_write_config_byte(pdev, config_base + 0x01, 0x33);
/* LSB UART */
pci_write_config_byte(pdev, config_base + 0x04, (u8)(iobase & 0xff));
/* MSB UART */
pci_write_config_byte(pdev, config_base + 0x05, (u8)((iobase & 0xff00) >> 8));
/* irq number, this usually fails, but the spec says to do it anyway. */
pci_write_config_byte(pdev, config_base + 0x06, pdev->irq);
port->port.iotype = UPIO_PORT;
port->port.iobase = iobase;
port->port.mapbase = 0;
port->port.membase = NULL;
port->port.regshift = 0;
return 0;
}
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_NO_TXEN_TEST;
dev_dbg(&priv->dev->dev,
"serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor, priv->dev->device,
priv->dev->subsystem_vendor, priv->dev->subsystem_device);
return pci_default_setup(priv, board, port, idx);
}
static void kt_handle_break(struct uart_port *p)
{
struct uart_8250_port *up =
container_of(p, struct uart_8250_port, port);
/*
* On receipt of a BI, serial device in Intel ME (Intel
* management engine) needs to have its fifos cleared for sane
* SOL (Serial Over Lan) output.
*/
serial8250_clear_and_reinit_fifos(up);
}
static unsigned int kt_serial_in(struct uart_port *p, int offset)
{
struct uart_8250_port *up =
container_of(p, struct uart_8250_port, port);
unsigned int val;
/*
* When the Intel ME (management engine) gets reset its serial
* port registers could return 0 momentarily. Functions like
* serial8250_console_write, read and save the IER, perform
* some operation and then restore it. In order to avoid
* setting IER register inadvertently to 0, if the value read
* is 0, double check with ier value in uart_8250_port and use
* that instead. up->ier should be the same value as what is
* currently configured.
*/
val = inb(p->iobase + offset);
if (offset == UART_IER) {
if (val == 0)
val = up->ier;
}
return val;
}
static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_BUG_THRE;
port->port.serial_in = kt_serial_in;
port->port.handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}
static int pci_eg20t_init(struct pci_dev *dev)
{
#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
return -ENODEV;
#else
return 0;
#endif
}
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_EXAR_EFR;
return pci_default_setup(priv, board, port, idx);
}
static int
pci_xr17v35x_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
u8 __iomem *p;
p = pci_ioremap_bar(priv->dev, 0);
if (p == NULL)
return -ENOMEM;
port->port.flags |= UPF_EXAR_EFR;
/*
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
writeb(128, p + UART_EXAR_TXTRG);
writeb(128, p + UART_EXAR_RXTRG);
iounmap(p);
return pci_default_setup(priv, board, port, idx);
}
#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b
static int
pci_fastcom335_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
u8 __iomem *p;
p = pci_ioremap_bar(priv->dev, 0);
if (p == NULL)
return -ENOMEM;
port->port.flags |= UPF_EXAR_EFR;
/*
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
switch (priv->dev->device) {
case PCI_DEVICE_ID_COMMTECH_4222PCI335:
case PCI_DEVICE_ID_COMMTECH_4224PCI335:
writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
break;
case PCI_DEVICE_ID_COMMTECH_2324PCI335:
case PCI_DEVICE_ID_COMMTECH_2328PCI335:
writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
break;
}
writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
writeb(32, p + UART_EXAR_TXTRG);
writeb(32, p + UART_EXAR_RXTRG);
iounmap(p);
return pci_default_setup(priv, board, port, idx);
}
static int
pci_wch_ch353_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16550A;
return pci_default_setup(priv, board, port, idx);
}
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500
#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
#define PCI_DEVICE_ID_TITAN_200I 0x8028
#define PCI_DEVICE_ID_TITAN_400I 0x8048
#define PCI_DEVICE_ID_TITAN_800I 0x8088
#define PCI_DEVICE_ID_TITAN_800EH 0xA007
#define PCI_DEVICE_ID_TITAN_800EHB 0xA008
#define PCI_DEVICE_ID_TITAN_400EH 0xA009
#define PCI_DEVICE_ID_TITAN_100E 0xA010
#define PCI_DEVICE_ID_TITAN_200E 0xA012
#define PCI_DEVICE_ID_TITAN_400E 0xA013
#define PCI_DEVICE_ID_TITAN_800E 0xA014
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
#define PCI_DEVICE_ID_TITAN_200V3 0xA306
#define PCI_DEVICE_ID_TITAN_400V3 0xA310
#define PCI_DEVICE_ID_TITAN_410V3 0xA312
#define PCI_DEVICE_ID_TITAN_800V3 0xA314
#define PCI_DEVICE_ID_TITAN_800V3B 0xA315
#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
#define PCI_VENDOR_ID_ASIX 0x9710
#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
#define PCI_VENDOR_ID_SUNIX 0x1fd4
#define PCI_DEVICE_ID_SUNIX_1999 0x1999
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
* This does not describe the general nature of the port.
* (ie, baud base, number and location of ports, etc)
*
* This list is ordered alphabetically by vendor then device.
* Specific entries must come before more generic entries.
*/
static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
/*
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
{
.vendor = PCI_VENDOR_ID_AMCC,
.device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = addidata_apci7800_setup,
},
/*
* AFAVLAB cards - these may be called via parport_serial
* It is not clear whether this applies to all products.
*/
{
.vendor = PCI_VENDOR_ID_AFAVLAB,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = afavlab_setup,
},
/*
* HP Diva
*/
{
.vendor = PCI_VENDOR_ID_HP,
.device = PCI_DEVICE_ID_HP_DIVA,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_hp_diva_init,
.setup = pci_hp_diva_setup,
},
/*
* Intel
*/
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_80960_RP,
.subvendor = 0xe4bf,
.subdevice = PCI_ANY_ID,
.init = pci_inteli960ni_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_8257X_SOL,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = skip_tx_en_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82573L_SOL,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = skip_tx_en_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82573E_SOL,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = skip_tx_en_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_CE4100_UART,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = ce4100_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = kt_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_BYT_UART1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_BYT_UART2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
},
/*
* ITE
*/
{
.vendor = PCI_VENDOR_ID_ITE,
.device = PCI_DEVICE_ID_ITE_8872,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ite887x_init,
.setup = pci_default_setup,
.exit = pci_ite887x_exit,
},
/*
* National Instruments
*/
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI23216,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI2328,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI2324,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI2322,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI2324I,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PCI2322I,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8420_23216,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8420_2328,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8420_2324,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8420_2322,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8422_2324,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_DEVICE_ID_NI_PXI8422_2322,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8420_init,
.setup = pci_default_setup,
.exit = pci_ni8420_exit,
},
{
.vendor = PCI_VENDOR_ID_NI,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_ni8430_init,
.setup = pci_ni8430_setup,
.exit = pci_ni8430_exit,
},
/* Quatech */
{
.vendor = PCI_VENDOR_ID_QUATECH,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_quatech_init,
.setup = pci_quatech_setup,
.exit = pci_quatech_exit,
},
/*
* Panacom
*/
{
.vendor = PCI_VENDOR_ID_PANACOM,
.device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PANACOM,
.device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
/*
* Pericom
*/
{
.vendor = 0x12d8,
.device = 0x7952,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_pericom_setup,
},
{
.vendor = 0x12d8,
.device = 0x7954,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_pericom_setup,
},
{
.vendor = 0x12d8,
.device = 0x7958,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_pericom_setup,
},
/*
* PLX
*/
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
.subvendor = PCI_SUBVENDOR_ID_PERLE,
.subdevice = PCI_ANY_ID,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_SUBVENDOR_ID_EXSYS,
.subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
.subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
.subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
{
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
.device = PCI_DEVICE_ID_OCTPRO,
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
.subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
.init = sbs_init,
.setup = sbs_setup,
.exit = sbs_exit,
},
/*
* SBS Technologies, Inc., PMC-OCTALPRO 422
*/
{
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
.device = PCI_DEVICE_ID_OCTPRO,
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
.subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
.init = sbs_init,
.setup = sbs_setup,
.exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 232
*/
{
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
.device = PCI_DEVICE_ID_OCTPRO,
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
.subdevice = PCI_SUBDEVICE_ID_POCTAL232,
.init = sbs_init,
.setup = sbs_setup,
.exit = sbs_exit,
},
/*
* SBS Technologies, Inc., P-Octal 422
*/
{
.vendor = PCI_VENDOR_ID_SBSMODULARIO,
.device = PCI_DEVICE_ID_OCTPRO,
.subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
.subdevice = PCI_SUBDEVICE_ID_POCTAL422,
.init = sbs_init,
.setup = sbs_setup,
.exit = sbs_exit,
},
/*
* SIIG cards - these may be called via parport_serial
*/
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig_init,
.setup = pci_siig_setup,
},
/*
* Titan cards
*/
{
.vendor = PCI_VENDOR_ID_TITAN,
.device = PCI_DEVICE_ID_TITAN_400L,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = titan_400l_800l_setup,
},
{
.vendor = PCI_VENDOR_ID_TITAN,
.device = PCI_DEVICE_ID_TITAN_800L,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = titan_400l_800l_setup,
},
/*
* Timedia cards
*/
{
.vendor = PCI_VENDOR_ID_TIMEDIA,
.device = PCI_DEVICE_ID_TIMEDIA_1889,
.subvendor = PCI_VENDOR_ID_TIMEDIA,
.subdevice = PCI_ANY_ID,
.probe = pci_timedia_probe,
.init = pci_timedia_init,
.setup = pci_timedia_setup,
},
{
.vendor = PCI_VENDOR_ID_TIMEDIA,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_timedia_setup,
},
/*
* SUNIX (Timedia) cards
* Do not "probe" for these cards as there is at least one combination
* card that should be handled by parport_pc that doesn't match the
* rule in pci_timedia_probe.
* It is part number is MIO5079A but its subdevice ID is 0x0102.
* There are some boards with part number SER5037AL that report
* subdevice ID 0x0002.
*/
{
.vendor = PCI_VENDOR_ID_SUNIX,
.device = PCI_DEVICE_ID_SUNIX_1999,
.subvendor = PCI_VENDOR_ID_SUNIX,
.subdevice = PCI_ANY_ID,
.init = pci_timedia_init,
.setup = pci_timedia_setup,
},
/*
* Exar cards
*/
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17C152,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17c154_setup,
},
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17C154,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17c154_setup,
},
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17C158,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17c154_setup,
},
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17V352,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17V354,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
{
.vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17V358,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
/*
* Xircom cards
*/
{
.vendor = PCI_VENDOR_ID_XIRCOM,
.device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_xircom_init,
.setup = pci_default_setup,
},
/*
* Netmos cards - these may be called via parport_serial
*/
{
.vendor = PCI_VENDOR_ID_NETMOS,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_netmos_init,
.setup = pci_netmos_9900_setup,
},
/*
* For Oxford Semiconductor Tornado based devices
*/
{
.vendor = PCI_VENDOR_ID_OXSEMI,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_MAINPINE,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_DIGI,
.device = PCIE_DEVICE_ID_NEO_2_OX_IBM,
.subvendor = PCI_SUBVENDOR_ID_IBM,
.subdevice = PCI_ANY_ID,
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_eg20t_init,
.setup = pci_default_setup,
},
/*
* Cronyx Omega PCI (PLX-chip based)
*/
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_omegapci_setup,
},
/* WCH CH353 2S1P card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
.device = PCI_DEVICE_ID_WCH_CH353_2S1P,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
/* WCH CH353 4S card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
.device = PCI_DEVICE_ID_WCH_CH353_4S,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
/* WCH CH353 2S1PF card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
.device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
/* WCH CH352 2S card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
.device = PCI_DEVICE_ID_WCH_CH352_2S,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
/*
* ASIX devices with FIFO bug
*/
{
.vendor = PCI_VENDOR_ID_ASIX,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_asix_setup,
},
/*
* Commtech, Inc. Fastcom adapters
*
*/
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_4222PCI335,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fastcom335_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_4224PCI335,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fastcom335_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_2324PCI335,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fastcom335_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_2328PCI335,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fastcom335_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_4222PCIE,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_4224PCIE,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
{
.vendor = PCI_VENDOR_ID_COMMTECH,
.device = PCI_DEVICE_ID_COMMTECH_4228PCIE,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
/*
* Broadcom TruManage (NetXtreme)
*/
{
.vendor = PCI_VENDOR_ID_BROADCOM,
.device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_brcm_trumanage_setup,
},
{
.vendor = 0x1c29,
.device = 0x1104,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fintek_setup,
},
{
.vendor = 0x1c29,
.device = 0x1108,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fintek_setup,
},
{
.vendor = 0x1c29,
.device = 0x1112,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_fintek_setup,
},
/*
* Default "match everything" terminator entry
*/
{
.vendor = PCI_ANY_ID,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_default_setup,
}
};
static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
{
return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
}
static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
{
struct pci_serial_quirk *quirk;
for (quirk = pci_serial_quirks; ; quirk++)
if (quirk_id_matches(quirk->vendor, dev->vendor) &&
quirk_id_matches(quirk->device, dev->device) &&
quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
quirk_id_matches(quirk->subdevice, dev->subsystem_device))
break;
return quirk;
}
static inline int get_pci_irq(struct pci_dev *dev,
const struct pciserial_board *board)
{
if (board->flags & FL_NOIRQ)
return 0;
else
return dev->irq;
}
/*
* This is the configuration table for all of the PCI serial boards
* which we support. It is directly indexed by the pci_board_num_t enum
* value, which is encoded in the pci_device_id PCI probe table's
* driver_data member.
*
* The makeup of these names are:
* pbn_bn{_bt}_n_baud{_offsetinhex}
*
* bn = PCI BAR number
* bt = Index using PCI BARs
* n = number of serial ports
* baud = baud rate
* offsetinhex = offset for each sequential port (in hex)
*
* This table is sorted by (in order): bn, bt, baud, offsetindex, n.
*
* Please note: in theory if n = 1, _bt infix should make no difference.
* ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
*/
enum pci_board_num_t {
pbn_default = 0,
pbn_b0_1_115200,
pbn_b0_2_115200,
pbn_b0_4_115200,
pbn_b0_5_115200,
pbn_b0_8_115200,
pbn_b0_1_921600,
pbn_b0_2_921600,
pbn_b0_4_921600,
pbn_b0_2_1130000,
pbn_b0_4_1152000,
pbn_b0_2_1152000_200,
pbn_b0_4_1152000_200,
pbn_b0_8_1152000_200,
pbn_b0_2_1843200,
pbn_b0_4_1843200,
pbn_b0_2_1843200_200,
pbn_b0_4_1843200_200,
pbn_b0_8_1843200_200,
pbn_b0_1_4000000,
pbn_b0_bt_1_115200,
pbn_b0_bt_2_115200,
pbn_b0_bt_4_115200,
pbn_b0_bt_8_115200,
pbn_b0_bt_1_460800,
pbn_b0_bt_2_460800,
pbn_b0_bt_4_460800,
pbn_b0_bt_1_921600,
pbn_b0_bt_2_921600,
pbn_b0_bt_4_921600,
pbn_b0_bt_8_921600,
pbn_b1_1_115200,
pbn_b1_2_115200,
pbn_b1_4_115200,
pbn_b1_8_115200,
pbn_b1_16_115200,
pbn_b1_1_921600,
pbn_b1_2_921600,
pbn_b1_4_921600,
pbn_b1_8_921600,
pbn_b1_2_1250000,
pbn_b1_bt_1_115200,
pbn_b1_bt_2_115200,
pbn_b1_bt_4_115200,
pbn_b1_bt_2_921600,
pbn_b1_1_1382400,
pbn_b1_2_1382400,
pbn_b1_4_1382400,
pbn_b1_8_1382400,
pbn_b2_1_115200,
pbn_b2_2_115200,
pbn_b2_4_115200,
pbn_b2_8_115200,
pbn_b2_1_460800,
pbn_b2_4_460800,
pbn_b2_8_460800,
pbn_b2_16_460800,
pbn_b2_1_921600,
pbn_b2_4_921600,
pbn_b2_8_921600,
pbn_b2_8_1152000,
pbn_b2_bt_1_115200,
pbn_b2_bt_2_115200,
pbn_b2_bt_4_115200,
pbn_b2_bt_2_921600,
pbn_b2_bt_4_921600,
pbn_b3_2_115200,
pbn_b3_4_115200,
pbn_b3_8_115200,
pbn_b4_bt_2_921600,
pbn_b4_bt_4_921600,
pbn_b4_bt_8_921600,
/*
* Board-specific versions.
*/
pbn_panacom,
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
pbn_oxsemi_2_4000000,
pbn_oxsemi_4_4000000,
pbn_oxsemi_8_4000000,
pbn_intel_i960,
pbn_sgi_ioc3,
pbn_computone_4,
pbn_computone_6,
pbn_computone_8,
pbn_sbsxrsio,
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
pbn_exar_XR17V352,
pbn_exar_XR17V354,
pbn_exar_XR17V358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
pbn_ADDIDATA_PCIe_1_3906250,
pbn_ADDIDATA_PCIe_2_3906250,
pbn_ADDIDATA_PCIe_4_3906250,
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_byt,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
pbn_brcm_trumanage,
pbn_fintek_4,
pbn_fintek_8,
pbn_fintek_12,
};
/*
* uart_offset - the space between channels
* reg_shift - describes how the UART registers are mapped
* to PCI memory by the card.
* For example IER register on SBS, Inc. PMC-OctPro is located at
* offset 0x10 from the UART base, while UART_IER is defined as 1
* in include/linux/serial_reg.h,
* see first lines of serial_in() and serial_out() in 8250.c
*/
static struct pciserial_board pci_boards[] = {
[pbn_default] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_1_115200] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_2_115200] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_4_115200] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_5_115200] = {
.flags = FL_BASE0,
.num_ports = 5,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_8_115200] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_2_921600] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_4_921600] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_2_1130000] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 1130000,
.uart_offset = 8,
},
[pbn_b0_4_1152000] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 1152000,
.uart_offset = 8,
},
[pbn_b0_2_1152000_200] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 1152000,
.uart_offset = 0x200,
},
[pbn_b0_4_1152000_200] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 1152000,
.uart_offset = 0x200,
},
[pbn_b0_8_1152000_200] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 1152000,
.uart_offset = 0x200,
},
[pbn_b0_2_1843200] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 1843200,
.uart_offset = 8,
},
[pbn_b0_4_1843200] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 1843200,
.uart_offset = 8,
},
[pbn_b0_2_1843200_200] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 1843200,
.uart_offset = 0x200,
},
[pbn_b0_4_1843200_200] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 1843200,
.uart_offset = 0x200,
},
[pbn_b0_8_1843200_200] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 1843200,
.uart_offset = 0x200,
},
[pbn_b0_1_4000000] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 4000000,
.uart_offset = 8,
},
[pbn_b0_bt_1_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_bt_2_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_bt_4_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_bt_8_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b0_bt_1_460800] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b0_bt_2_460800] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b0_bt_4_460800] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b0_bt_1_921600] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_bt_2_921600] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_bt_4_921600] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b0_bt_8_921600] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_1_115200] = {
.flags = FL_BASE1,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_2_115200] = {
.flags = FL_BASE1,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_4_115200] = {
.flags = FL_BASE1,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_8_115200] = {
.flags = FL_BASE1,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_16_115200] = {
.flags = FL_BASE1,
.num_ports = 16,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_1_921600] = {
.flags = FL_BASE1,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_2_921600] = {
.flags = FL_BASE1,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_4_921600] = {
.flags = FL_BASE1,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_8_921600] = {
.flags = FL_BASE1,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_2_1250000] = {
.flags = FL_BASE1,
.num_ports = 2,
.base_baud = 1250000,
.uart_offset = 8,
},
[pbn_b1_bt_1_115200] = {
.flags = FL_BASE1|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_bt_2_115200] = {
.flags = FL_BASE1|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_bt_4_115200] = {
.flags = FL_BASE1|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b1_bt_2_921600] = {
.flags = FL_BASE1|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b1_1_1382400] = {
.flags = FL_BASE1,
.num_ports = 1,
.base_baud = 1382400,
.uart_offset = 8,
},
[pbn_b1_2_1382400] = {
.flags = FL_BASE1,
.num_ports = 2,
.base_baud = 1382400,
.uart_offset = 8,
},
[pbn_b1_4_1382400] = {
.flags = FL_BASE1,
.num_ports = 4,
.base_baud = 1382400,
.uart_offset = 8,
},
[pbn_b1_8_1382400] = {
.flags = FL_BASE1,
.num_ports = 8,
.base_baud = 1382400,
.uart_offset = 8,
},
[pbn_b2_1_115200] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_2_115200] = {
.flags = FL_BASE2,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_4_115200] = {
.flags = FL_BASE2,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_8_115200] = {
.flags = FL_BASE2,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_1_460800] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b2_4_460800] = {
.flags = FL_BASE2,
.num_ports = 4,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b2_8_460800] = {
.flags = FL_BASE2,
.num_ports = 8,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b2_16_460800] = {
.flags = FL_BASE2,
.num_ports = 16,
.base_baud = 460800,
.uart_offset = 8,
},
[pbn_b2_1_921600] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b2_4_921600] = {
.flags = FL_BASE2,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b2_8_921600] = {
.flags = FL_BASE2,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b2_8_1152000] = {
.flags = FL_BASE2,
.num_ports = 8,
.base_baud = 1152000,
.uart_offset = 8,
},
[pbn_b2_bt_1_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_bt_2_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_bt_4_115200] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b2_bt_2_921600] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b2_bt_4_921600] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b3_2_115200] = {
.flags = FL_BASE3,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b3_4_115200] = {
.flags = FL_BASE3,
.num_ports = 4,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b3_8_115200] = {
.flags = FL_BASE3,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_b4_bt_2_921600] = {
.flags = FL_BASE4,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b4_bt_4_921600] = {
.flags = FL_BASE4,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8,
},
[pbn_b4_bt_8_921600] = {
.flags = FL_BASE4,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 8,
},
/*
* Entries following this are board-specific.
*/
/*
* Panacom - IOMEM
*/
[pbn_panacom] = {
.flags = FL_BASE2,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 0x400,
.reg_shift = 7,
},
[pbn_panacom2] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 0x400,
.reg_shift = 7,
},
[pbn_panacom4] = {
.flags = FL_BASE2|FL_BASE_BARS,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 0x400,
.reg_shift = 7,
},
/* I think this entry is broken - the first_offset looks wrong --rmk */
[pbn_plx_romulus] = {
.flags = FL_BASE2,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 8 << 2,
.reg_shift = 2,
.first_offset = 0x03,
},
/*
* This board uses the size of PCI Base region 0 to
* signal now many ports are available
*/
[pbn_oxsemi] = {
.flags = FL_BASE0|FL_REGION_SZ_CAP,
.num_ports = 32,
.base_baud = 115200,
.uart_offset = 8,
},
[pbn_oxsemi_1_4000000] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 4000000,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_oxsemi_2_4000000] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 4000000,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_oxsemi_4_4000000] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 4000000,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_oxsemi_8_4000000] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 4000000,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
/*
* EKF addition for i960 Boards form EKF with serial port.
* Max 256 ports.
*/
[pbn_intel_i960] = {
.flags = FL_BASE0,
.num_ports = 32,
.base_baud = 921600,
.uart_offset = 8 << 2,
.reg_shift = 2,
.first_offset = 0x10000,
},
[pbn_sgi_ioc3] = {
.flags = FL_BASE0|FL_NOIRQ,
.num_ports = 1,
.base_baud = 458333,
.uart_offset = 8,
.reg_shift = 0,
.first_offset = 0x20178,
},
/*
* Computone - uses IOMEM.
*/
[pbn_computone_4] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 0x40,
.reg_shift = 2,
.first_offset = 0x200,
},
[pbn_computone_6] = {
.flags = FL_BASE0,
.num_ports = 6,
.base_baud = 921600,
.uart_offset = 0x40,
.reg_shift = 2,
.first_offset = 0x200,
},
[pbn_computone_8] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 0x40,
.reg_shift = 2,
.first_offset = 0x200,
},
[pbn_sbsxrsio] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 460800,
.uart_offset = 256,
.reg_shift = 4,
},
/*
* Exar Corp. XR17C15[248] Dual/Quad/Octal UART
* Only basic 16550A support.
* XR17C15[24] are not tested, but they should work.
*/
[pbn_exar_XR17C152] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 0x200,
},
[pbn_exar_XR17C154] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 0x200,
},
[pbn_exar_XR17C158] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 921600,
.uart_offset = 0x200,
},
[pbn_exar_XR17V352] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 7812500,
.uart_offset = 0x400,
.reg_shift = 0,
.first_offset = 0,
},
[pbn_exar_XR17V354] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 7812500,
.uart_offset = 0x400,
.reg_shift = 0,
.first_offset = 0,
},
[pbn_exar_XR17V358] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 7812500,
.uart_offset = 0x400,
.reg_shift = 0,
.first_offset = 0,
},
[pbn_exar_ibm_saturn] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 0x200,
},
/*
* PA Semi PWRficient PA6T-1682M on-chip UART
*/
[pbn_pasemi_1682M] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 8333333,
},
/*
* National Instruments 843x
*/
[pbn_ni8430_16] = {
.flags = FL_BASE0,
.num_ports = 16,
.base_baud = 3686400,
.uart_offset = 0x10,
.first_offset = 0x800,
},
[pbn_ni8430_8] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 3686400,
.uart_offset = 0x10,
.first_offset = 0x800,
},
[pbn_ni8430_4] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 3686400,
.uart_offset = 0x10,
.first_offset = 0x800,
},
[pbn_ni8430_2] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 3686400,
.uart_offset = 0x10,
.first_offset = 0x800,
},
/*
* ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
*/
[pbn_ADDIDATA_PCIe_1_3906250] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_ADDIDATA_PCIe_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_ADDIDATA_PCIe_4_3906250] = {
.flags = FL_BASE0,
.num_ports = 4,
.base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_ADDIDATA_PCIe_8_3906250] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
[pbn_ce4100_1_115200] = {
.flags = FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.reg_shift = 2,
},
[pbn_byt] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 2764800,
.uart_offset = 0x80,
.reg_shift = 2,
},
[pbn_omegapci] = {
.flags = FL_BASE0,
.num_ports = 8,
.base_baud = 115200,
.uart_offset = 0x200,
},
[pbn_NETMOS9900_2s_115200] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 115200,
},
[pbn_brcm_trumanage] = {
.flags = FL_BASE0,
.num_ports = 1,
.reg_shift = 2,
.base_baud = 115200,
},
[pbn_fintek_4] = {
.num_ports = 4,
.uart_offset = 8,
.base_baud = 115200,
.first_offset = 0x40,
},
[pbn_fintek_8] = {
.num_ports = 8,
.uart_offset = 8,
.base_baud = 115200,
.first_offset = 0x40,
},
[pbn_fintek_12] = {
.num_ports = 12,
.uart_offset = 8,
.base_baud = 115200,
.first_offset = 0x40,
},
};
static const struct pci_device_id blacklist[] = {
/* softmodems */
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
/* multi-io cards handled by parport_serial */
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
};
/*
* Given a complete unknown PCI device, try to use some heuristics to
* guess what the configuration might be, based on the pitiful PCI
* serial specs. Returns 0 on success, 1 on failure.
*/
static int
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{
const struct pci_device_id *bldev;
int num_iomem, num_port, first_port = -1, i;
/*
* If it is not a communications device or the programming
* interface is greater than 6, give up.
*
* (Should we try to make guesses for multiport serial devices
* later?)
*/
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
(dev->class & 0xff) > 6)
return -ENODEV;
/*
* Do not access blacklisted devices that are known not to
* feature serial ports or are handled by other modules.
*/
for (bldev = blacklist;
bldev < blacklist + ARRAY_SIZE(blacklist);
bldev++) {
if (dev->vendor == bldev->vendor &&
dev->device == bldev->device)
return -ENODEV;
}
num_iomem = num_port = 0;
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
num_port++;
if (first_port == -1)
first_port = i;
}
if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
num_iomem++;
}
/*
* If there is 1 or 0 iomem regions, and exactly one port,
* use it. We guess the number of ports based on the IO
* region size.
*/
if (num_iomem <= 1 && num_port == 1) {
board->flags = first_port;
board->num_ports = pci_resource_len(dev, first_port) / 8;
return 0;
}
/*
* Now guess if we've got a board which indexes by BARs.
* Each IO BAR should be 8 bytes, and they should follow
* consecutively.
*/
first_port = -1;
num_port = 0;
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
pci_resource_len(dev, i) == 8 &&
(first_port == -1 || (first_port + num_port) == i)) {
num_port++;
if (first_port == -1)
first_port = i;
}
}
if (num_port > 1) {
board->flags = first_port | FL_BASE_BARS;
board->num_ports = num_port;
return 0;
}
return -ENODEV;
}
static inline int
serial_pci_matches(const struct pciserial_board *board,
const struct pciserial_board *guessed)
{
return
board->num_ports == guessed->num_ports &&
board->base_baud == guessed->base_baud &&
board->uart_offset == guessed->uart_offset &&
board->reg_shift == guessed->reg_shift &&
board->first_offset == guessed->first_offset;
}
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
struct uart_8250_port uart;
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
nr_ports = board->num_ports;
/*
* Find an init and setup quirks.
*/
quirk = find_quirk(dev);
/*
* Run the new-style initialization function.
* The initialization function returns:
* <0 - error
* 0 - use board->num_ports
* >0 - number of ports
*/
if (quirk->init) {
rc = quirk->init(dev);
if (rc < 0) {
priv = ERR_PTR(rc);
goto err_out;
}
if (rc)
nr_ports = rc;
}
priv = kzalloc(sizeof(struct serial_private) +
sizeof(unsigned int) * nr_ports,
GFP_KERNEL);
if (!priv) {
priv = ERR_PTR(-ENOMEM);
goto err_deinit;
}
priv->dev = dev;
priv->quirk = quirk;
memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
uart.port.irq = get_pci_irq(dev, board);
uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
if (quirk->setup(priv, board, &uart, i))
break;
dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
uart.port.iobase, uart.port.irq, uart.port.iotype);
priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
dev_err(&dev->dev,
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
uart.port.iobase, uart.port.irq,
uart.port.iotype, priv->line[i]);
break;
}
}
priv->nr = i;
return priv;
err_deinit:
if (quirk->exit)
quirk->exit(dev);
err_out:
return priv;
}
EXPORT_SYMBOL_GPL(pciserial_init_ports);
void pciserial_remove_ports(struct serial_private *priv)
{
struct pci_serial_quirk *quirk;
int i;
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
if (priv->remapped_bar[i])
iounmap(priv->remapped_bar[i]);
priv->remapped_bar[i] = NULL;
}
/*
* Find the exit quirks.
*/
quirk = find_quirk(priv->dev);
if (quirk->exit)
quirk->exit(priv->dev);
kfree(priv);
}
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
void pciserial_suspend_ports(struct serial_private *priv)
{
int i;
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
/*
* Ensure that every init quirk is properly torn down
*/
if (priv->quirk->exit)
priv->quirk->exit(priv->dev);
}
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
void pciserial_resume_ports(struct serial_private *priv)
{
int i;
/*
* Ensure that the board is correctly configured.
*/
if (priv->quirk->init)
priv->quirk->init(priv->dev);
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_resume_port(priv->line[i]);
}
EXPORT_SYMBOL_GPL(pciserial_resume_ports);
/*
* Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
static int
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct pci_serial_quirk *quirk;
struct serial_private *priv;
const struct pciserial_board *board;
struct pciserial_board tmp;
int rc;
quirk = find_quirk(dev);
if (quirk->probe) {
rc = quirk->probe(dev);
if (rc)
return rc;
}
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
dev_err(&dev->dev, "invalid driver_data: %ld\n",
ent->driver_data);
return -EINVAL;
}
board = &pci_boards[ent->driver_data];
rc = pci_enable_device(dev);
pci_save_state(dev);
if (rc)
return rc;
if (ent->driver_data == pbn_default) {
/*
* Use a copy of the pci_board entry for this;
* avoid changing entries in the table.
*/
memcpy(&tmp, board, sizeof(struct pciserial_board));
board = &tmp;
/*
* We matched one of our class entries. Try to
* determine the parameters of this board.
*/
rc = serial_pci_guess_board(dev, &tmp);
if (rc)
goto disable;
} else {
/*
* We matched an explicit entry. If we are able to
* detect this boards settings with our heuristic,
* then we no longer need this entry.
*/
memcpy(&tmp, &pci_boards[pbn_default],
sizeof(struct pciserial_board));
rc = serial_pci_guess_board(dev, &tmp);
if (rc == 0 && serial_pci_matches(board, &tmp))
moan_device("Redundant entry in serial pci_table.",
dev);
}
priv = pciserial_init_ports(dev, board);
if (!IS_ERR(priv)) {
pci_set_drvdata(dev, priv);
return 0;
}
rc = PTR_ERR(priv);
disable:
pci_disable_device(dev);
return rc;
}
static void pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
pciserial_remove_ports(priv);
pci_disable_device(dev);
}
#ifdef CONFIG_PM
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
{
struct serial_private *priv = pci_get_drvdata(dev);
if (priv)
pciserial_suspend_ports(priv);
pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
static int pciserial_resume_one(struct pci_dev *dev)
{
int err;
struct serial_private *priv = pci_get_drvdata(dev);
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
if (priv) {
/*
* The device may have been disabled. Re-enable it.
*/
err = pci_enable_device(dev);
/* FIXME: We cannot simply error out here */
if (err)
dev_err(&dev->dev, "Unable to re-enable ports, trying to continue.\n");
pciserial_resume_ports(priv);
}
return 0;
}
#endif
static struct pci_device_id serial_pci_tbl[] = {
/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
pbn_b2_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
pbn_b1_8_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
pbn_b1_4_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
pbn_b1_2_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
pbn_b1_8_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
pbn_b1_4_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
pbn_b1_2_1382400 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
pbn_b1_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
pbn_b1_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
pbn_b1_4_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
pbn_b1_4_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
pbn_b1_2_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
pbn_b1_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
pbn_b1_8_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
pbn_b1_4_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
pbn_b1_2_1250000 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
pbn_b0_2_1843200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
pbn_b0_4_1843200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_VENDOR_ID_AFAVLAB,
PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
pbn_b0_4_1152000 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
pbn_b0_2_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
pbn_b0_4_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
pbn_b0_2_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
pbn_b0_4_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
pbn_b0_2_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
pbn_b0_4_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
pbn_b0_2_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
pbn_b0_4_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
0, 0, pbn_exar_ibm_saturn },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_1_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_921600 },
/*
* VScom SPCOM800, from sl@s.pl
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_921600 },
/* Unknown card - subdevice 0x1584 */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
pbn_b2_4_115200 },
/* Unknown card - subdevice 0x1588 */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
pbn_panacom },
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_panacom4 },
{ PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_panacom2 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
PCI_VENDOR_ID_ESDGMBH,
PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
pbn_b2_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS,
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
pbn_b2_4_115200 },
/*
* Megawolf Romulus PCI Serial Card, from Mike Hudson
* (Exoray@isys.ca)
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
0x10b5, 0x106a, 0, 0,
pbn_plx_romulus },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.
*
* 100 series are RS232, 200 series RS422,
*/
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_2_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_8_115200 },
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
0, 0,
pbn_b0_4_1152000 },
{ PCI_VENDOR_ID_OXSEMI, 0x9505,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
/*
* The below card is a little controversial since it is the
* subject of a PCI vendor/device ID clash. (See
* www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
* For now just used the hex ID 0x950a.
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
0, 0, pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
0, 0, pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
PCI_ANY_ID , PCI_ANY_ID, 0, 0,
pbn_b2_8_1152000 },
/*
* Oxford Semiconductor Inc. Tornado PCI express device range.
*/
{ PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_4_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_4_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_8_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_8_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
/*
* Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado
*/
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0,
pbn_oxsemi_4_4000000 },
{ PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */
PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0,
pbn_oxsemi_8_4000000 },
/*
* Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado
*/
{ PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
/*
* SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
* from skokodyn@yahoo.com
*/
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
pbn_sbsxrsio },
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
pbn_sbsxrsio },
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
pbn_sbsxrsio },
{ PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
pbn_sbsxrsio },
/*
* Digitan DS560-558, from jimd@esoft.com
*/
{ PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_115200 },
/*
* Titan Electronic cards
* The 400L and 800L have a custom setup quirk.
*/
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b4_bt_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b4_bt_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b4_bt_8_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_1_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_4_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_8_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_460800 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_460800 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_460800 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
/*
* Computone devices submitted by Doug McNash dmcnash@computone.com
*/
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
0, 0, pbn_computone_4 },
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
0, 0, pbn_computone_8 },
{ PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
0, 0, pbn_computone_6 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi },
{ PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
pbn_b0_bt_1_921600 },
/*
* SUNIX (TIMEDIA)
*/
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
pbn_b0_bt_1_921600 },
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
pbn_b0_bt_1_921600 },
/*
* AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
*/
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_115200 },
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_460800 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_460800 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_460800 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_460800 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_460800 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_1_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_1_460800 },
/*
* Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
* Cards are identified by their subsystem vendor IDs, which
* (in hex) match the model number.
*
* Note that JC140x are RS422/485 cards which require ox950
* ACR = 0x10, and as such are not currently fully supported.
*/
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
0x1204, 0x0004, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
0x1208, 0x0004, 0, 0,
pbn_b0_4_921600 },
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
0x1402, 0x0002, 0, 0,
pbn_b0_2_921600 }, */
/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
0x1404, 0x0004, 0, 0,
pbn_b0_4_921600 }, */
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
0x1208, 0x0004, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
0x1204, 0x0004, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2,
0x1208, 0x0004, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3,
0x1208, 0x0004, 0, 0,
pbn_b0_4_921600 },
/*
* Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
*/
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_1382400 },
/*
* Dell Remote Access Card III - Tim_T_Murphy@Dell.com
*/
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_1382400 },
/*
* RAStel 2 port modem, gerg@moreton.com.au
*/
{ PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
/*
* EKF addition for i960 Boards form EKF with serial port
*/
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
0xE4BF, PCI_ANY_ID, 0, 0,
pbn_intel_i960 },
/*
* Xircom Cardbus/Ethernet combos
*/
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_115200 },
/*
* Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
*/
{ PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_115200 },
/*
* Untested PCI modems, sent in from various folks...
*/
/*
* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
*/
{ PCI_VENDOR_ID_ROCKWELL, 0x1004,
0x1048, 0x1500, 0, 0,
pbn_b1_1_115200 },
{ PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
0xFF00, 0, 0, 0,
pbn_sgi_ioc3 },
/*
* HP Diva card
*/
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
pbn_b1_1_115200 },
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_5_115200 },
{ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_1_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b3_2_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b3_4_115200 },
{ PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b3_8_115200 },
/*
* Exar Corp. XR17C15[248] Dual/Quad/Octal UART
*/
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17C152 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17C154 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17C158 },
/*
* Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
*/
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V352 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V354 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_115200 },
/*
* ITE
*/
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
pbn_b1_bt_1_115200 },
/*
* IntaShield IS-200
*/
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
pbn_b2_2_115200 },
/*
* IntaShield IS-400
*/
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
0, 0, pbn_b2_4_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
0, 0, pbn_b2_8_921600 },
/*
* Mainpine series cards: Fairly standard layout but fools
* parts of the autodetect in some cases and uses otherwise
* unmatched communications subclasses in the PCI Express case
*/
{ /* RockForceDUO */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0200,
0, 0, pbn_b0_2_115200 },
{ /* RockForceQUATRO */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0300,
0, 0, pbn_b0_4_115200 },
{ /* RockForceDUO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0400,
0, 0, pbn_b0_2_115200 },
{ /* RockForceQUATRO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0500,
0, 0, pbn_b0_4_115200 },
{ /* RockForce+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0600,
0, 0, pbn_b0_2_115200 },
{ /* RockForce+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0700,
0, 0, pbn_b0_4_115200 },
{ /* RockForceOCTO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0800,
0, 0, pbn_b0_8_115200 },
{ /* RockForceDUO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0C00,
0, 0, pbn_b0_2_115200 },
{ /* RockForceQUARTRO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x0D00,
0, 0, pbn_b0_4_115200 },
{ /* RockForceOCTO+ */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x1D00,
0, 0, pbn_b0_8_115200 },
{ /* RockForceD1 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2000,
0, 0, pbn_b0_1_115200 },
{ /* RockForceF1 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2100,
0, 0, pbn_b0_1_115200 },
{ /* RockForceD2 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2200,
0, 0, pbn_b0_2_115200 },
{ /* RockForceF2 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2300,
0, 0, pbn_b0_2_115200 },
{ /* RockForceD4 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2400,
0, 0, pbn_b0_4_115200 },
{ /* RockForceF4 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2500,
0, 0, pbn_b0_4_115200 },
{ /* RockForceD8 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2600,
0, 0, pbn_b0_8_115200 },
{ /* RockForceF8 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x2700,
0, 0, pbn_b0_8_115200 },
{ /* IQ Express D1 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3000,
0, 0, pbn_b0_1_115200 },
{ /* IQ Express F1 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3100,
0, 0, pbn_b0_1_115200 },
{ /* IQ Express D2 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3200,
0, 0, pbn_b0_2_115200 },
{ /* IQ Express F2 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3300,
0, 0, pbn_b0_2_115200 },
{ /* IQ Express D4 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3400,
0, 0, pbn_b0_4_115200 },
{ /* IQ Express F4 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3500,
0, 0, pbn_b0_4_115200 },
{ /* IQ Express D8 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3C00,
0, 0, pbn_b0_8_115200 },
{ /* IQ Express F8 */
PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
PCI_VENDOR_ID_MAINPINE, 0x3D00,
0, 0, pbn_b0_8_115200 },
/*
* PA Semi PA6T-1682M on-chip UART
*/
{ PCI_VENDOR_ID_PASEMI, 0xa004,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pasemi_1682M },
/*
* National Instruments
*/
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_16_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_4_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_2_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_4_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_2_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_16_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_4_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_2_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_4_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_bt_2_115200 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_2 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_2 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_8 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_8 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_16 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_16 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_2 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_2 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
{ PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ni8430_4 },
/*
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7500,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7420,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_2_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7300,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_1_115200 },
{ PCI_VENDOR_ID_AMCC,
PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_2_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_1_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_2_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_1_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_b0_8_115200 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCIe7500,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_ADDIDATA_PCIe_4_3906250 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCIe7420,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_ADDIDATA_PCIe_2_3906250 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCIe7300,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_ADDIDATA_PCIe_1_3906250 },
{ PCI_VENDOR_ID_ADDIDATA,
PCI_DEVICE_ID_ADDIDATA_APCIe7800,
PCI_ANY_ID,
PCI_ANY_ID,
0,
0,
pbn_ADDIDATA_PCIe_8_3906250 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
/*
* other NetMos 9835 devices are most likely handled by the
* parport_serial driver, check drivers/parport/parport_serial.c
* before adding them here.
*/
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
/* the 9901 is a rebranded 9912 */
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x3002,
0, 0, pbn_NETMOS9900_2s_115200 },
/*
* Best Connectivity and Rosewill PCI Multi I/O cards
*/
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3002,
0, 0, pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3004,
0, 0, pbn_b0_bt_4_115200 },
/* Intel CE4100 */
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ce4100_1_115200 },
/* Intel BayTrail */
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
pbn_byt },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
pbn_byt },
/*
* Cronyx Omega PCI
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_omegapci },
/*
* Broadcom TruManage
*/
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_brcm_trumanage },
/*
* AgeStar as-prs2-009
*/
{ PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
/*
* WCH CH353 series devices: The 2S1P is handled by parport_serial
* so not listed here.
*/
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_4_115200 },
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
/*
* Commtech, Inc. Fastcom adapters
*/
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_b0_2_1152000_200 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_b0_4_1152000_200 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_b0_4_1152000_200 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_b0_8_1152000_200 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V352 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V354 },
{ PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
/* Fintek PCI serial cards */
{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
{ PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_SERIAL << 8,
0xffff00, pbn_default },
{ PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_MODEM << 8,
0xffff00, pbn_default },
{ PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
0xffff00, pbn_default },
{ 0, }
};
static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
pci_channel_state_t state)
{
struct serial_private *priv = pci_get_drvdata(dev);
if (state == pci_channel_io_perm_failure)
return PCI_ERS_RESULT_DISCONNECT;
if (priv)
pciserial_suspend_ports(priv);
pci_disable_device(dev);
return PCI_ERS_RESULT_NEED_RESET;
}
static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
{
int rc;
rc = pci_enable_device(dev);
if (rc)
return PCI_ERS_RESULT_DISCONNECT;
pci_restore_state(dev);
pci_save_state(dev);
return PCI_ERS_RESULT_RECOVERED;
}
static void serial8250_io_resume(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
if (priv)
pciserial_resume_ports(priv);
}
static const struct pci_error_handlers serial8250_err_handler = {
.error_detected = serial8250_io_error_detected,
.slot_reset = serial8250_io_slot_reset,
.resume = serial8250_io_resume,
};
static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
.remove = pciserial_remove_one,
#ifdef CONFIG_PM
.suspend = pciserial_suspend_one,
.resume = pciserial_resume_one,
#endif
.id_table = serial_pci_tbl,
.err_handler = &serial8250_err_handler,
};
module_pci_driver(serial_pci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
