/*
* (C) Copyright David Brownell 2000-2002
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <asm/io.h>
#include <asm/irq.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
#include "usb.h"
#include "hcd.h"
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
/*-------------------------------------------------------------------------*/
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_pci_probe - initialize PCI-based HCDs
* @dev: USB Host Controller being probed
* @id: pci hotplug id connecting controller to HCD framework
* Context: !in_interrupt()
*
* Allocates basic PCI resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
* Store this function in the HCD's struct pci_driver as probe().
*/
int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
if (usb_disabled())
return -ENODEV;
if (!id)
return -EINVAL;
driver = (struct hc_driver *)id->driver_data;
if (!driver)
return -EINVAL;
if (pci_enable_device(dev) < 0)
return -ENODEV;
dev->current_state = PCI_D0;
if (!dev->irq) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
retval = -ENODEV;
goto err1;
}
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
if (!hcd) {
retval = -ENOMEM;
goto err1;
}
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
hcd->rsrc_start = pci_resource_start(dev, 0);
hcd->rsrc_len = pci_resource_len(dev, 0);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&dev->dev, "controller already in use\n");
retval = -EBUSY;
goto err2;
}
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&dev->dev, "error mapping memory\n");
retval = -EFAULT;
goto err3;
}
} else {
/* UHCI */
int region;
for (region = 0; region < PCI_ROM_RESOURCE; region++) {
if (!(pci_resource_flags(dev, region) &
IORESOURCE_IO))
continue;
hcd->rsrc_start = pci_resource_start(dev, region);
hcd->rsrc_len = pci_resource_len(dev, region);
if (request_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description))
break;
}
if (region == PCI_ROM_RESOURCE) {
dev_dbg(&dev->dev, "no i/o regions available\n");
retval = -EBUSY;
goto err1;
}
}
pci_set_master(dev);
retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
err4:
if (driver->flags & HCD_MEMORY) {
iounmap(hcd->regs);
err3:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
} else
release_region(hcd->rsrc_start, hcd->rsrc_len);
err2:
usb_put_hcd(hcd);
err1:
pci_disable_device(dev);
dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_pci_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
* Store this function in the HCD's struct pci_driver as remove().
*/
void usb_hcd_pci_remove(struct pci_dev *dev)
{
struct usb_hcd *hcd;
hcd = pci_get_drvdata(dev);
if (!hcd)
return;
usb_remove_hcd(hcd);
if (hcd->driver->flags & HCD_MEMORY) {
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
} else {
release_region(hcd->rsrc_start, hcd->rsrc_len);
}
usb_put_hcd(hcd);
pci_disable_device(dev);
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
#ifdef CONFIG_PM
/**
* usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
* @dev: USB Host Controller being suspended
* @message: Power Management message describing this state transition
*
* Store this function in the HCD's struct pci_driver as .suspend.
*/
int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
{
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
int has_pci_pm;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
* and the stub usb_device (which we check here). But maybe it
* didn't; writing sysfs power/state files ignores such rules...
*
* We must ignore the FREEZE vs SUSPEND distinction here, because
* otherwise the swsusp will save (and restore) garbage state.
*/
if (!(hcd->state == HC_STATE_SUSPENDED ||
hcd->state == HC_STATE_HALT)) {
dev_warn(&dev->dev, "Root hub is not suspended\n");
retval = -EBUSY;
goto done;
}
/* We might already be suspended (runtime PM -- not yet written) */
if (dev->current_state != PCI_D0)
goto done;
if (hcd->driver->pci_suspend) {
retval = hcd->driver->pci_suspend(hcd, message);
suspend_report_result(hcd->driver->pci_suspend, retval);
if (retval)
goto done;
}
synchronize_irq(dev->irq);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
* link (except maybe for PME# resume signaling) and enter some PCI
* low power state, if the hardware allows.
*/
pci_disable_device(dev);
pci_save_state(dev);
/* Don't fail on error to enable wakeup. We rely on pci code
* to reject requests the hardware can't implement, rather
* than coding the same thing.
*/
wake = (hcd->state == HC_STATE_SUSPENDED &&
device_may_wakeup(&dev->dev));
w = pci_wake_from_d3(dev, wake);
if (w < 0)
wake = w;
dev_dbg(&dev->dev, "wakeup: %d\n", wake);
/* Don't change state if we don't need to */
if (message.event == PM_EVENT_FREEZE ||
message.event == PM_EVENT_PRETHAW) {
dev_dbg(&dev->dev, "--> no state change\n");
goto done;
}
has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
if (!has_pci_pm) {
dev_dbg(&dev->dev, "--> PCI D0 legacy\n");
} else {
/* NOTE: dev->current_state becomes nonzero only here, and
* only for devices that support PCI PM. Also, exiting
* PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset
* some device state (e.g. as part of clock reinit).
*/
retval = pci_set_power_state(dev, PCI_D3hot);
suspend_report_result(pci_set_power_state, retval);
if (retval == 0) {
dev_dbg(&dev->dev, "--> PCI D3\n");
} else {
dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
pci_restore_state(dev);
}
}
#ifdef CONFIG_PPC_PMAC
if (retval == 0) {
/* Disable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node(dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 0);
}
}
#endif
done:
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
* usb_hcd_pci_resume - power management resume of a PCI-based HCD
* @dev: USB Host Controller being resumed
*
* Store this function in the HCD's struct pci_driver as .resume.
*/
int usb_hcd_pci_resume(struct pci_dev *dev)
{
struct usb_hcd *hcd;
int retval;
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node(dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
pci_restore_state(dev);
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
"can't resume, not suspended!\n");
return 0;
}
pci_enable_wake(dev, PCI_D0, false);
retval = pci_enable_device(dev);
if (retval < 0) {
dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
retval);
return retval;
}
pci_set_master(dev);
/* yes, ignore this result too... */
(void) pci_wake_from_d3(dev, 0);
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
if (hcd->driver->pci_resume) {
retval = hcd->driver->pci_resume(hcd);
if (retval) {
dev_err(hcd->self.controller,
"PCI post-resume error %d!\n", retval);
usb_hc_died(hcd);
}
}
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
#endif /* CONFIG_PM */
/**
* usb_hcd_pci_shutdown - shutdown host controller
* @dev: USB Host Controller being shutdown
*/
void usb_hcd_pci_shutdown(struct pci_dev *dev)
{
struct usb_hcd *hcd;
hcd = pci_get_drvdata(dev);
if (!hcd)
return;
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
