/*
* Universal Host Controller Interface driver for USB.
*
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
* (C) Copyright 1999 Linus Torvalds
* (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
* (C) Copyright 1999 Randy Dunlap
* (C) Copyright 1999 Georg Acher, acher@in.tum.de
* (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
* (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
* (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
* (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
*
* Intel documents this fairly well, and as far as I know there
* are no royalties or anything like that, but even so there are
* people who decided that they want to do the same thing in a
* completely different way.
*
* WARNING! The USB documentation is downright evil. Most of it
* is just crap, written by a committee. You're better off ignoring
* most of it, the important stuff is:
* - the low-level protocol (fairly simple but lots of small details)
* - working around the horridness of the rest
*/
#include <linux/config.h>
#ifdef CONFIG_USB_DEBUG
#define DEBUG
#else
#undef DEBUG
#endif
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/pm.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
#include <linux/bitops.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include "../core/hcd.h"
#include "uhci-hcd.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v2.2"
#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
/*
* debug = 0, no debugging messages
* debug = 1, dump failed URB's except for stalls
* debug = 2, dump all failed URB's (including stalls)
* show all queues in /debug/uhci/[pci_addr]
* debug = 3, show all TD's in URB's when dumping
*/
#ifdef DEBUG
static int debug = 1;
#else
static int debug = 0;
#endif
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug level");
static char *errbuf;
#define ERRBUF_LEN (32 * 1024)
static kmem_cache_t *uhci_up_cachep; /* urb_priv */
static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
/* If a transfer is still active after this much time, turn off FSBR */
#define IDLE_TIMEOUT msecs_to_jiffies(50)
#define FSBR_DELAY msecs_to_jiffies(50)
/* When we timeout an idle transfer for FSBR, we'll switch it over to */
/* depth first traversal. We'll do it in groups of this number of TD's */
/* to make sure it doesn't hog all of the bandwidth */
#define DEPTH_INTERVAL 5
#include "uhci-hub.c"
#include "uhci-debug.c"
#include "uhci-q.c"
static int ports_active(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
int connection = 0;
int i;
for (i = 0; i < uhci->rh_numports; i++)
connection |= (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_CCS);
return connection;
}
static int suspend_allowed(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
int i;
if (to_pci_dev(uhci_dev(uhci))->vendor != PCI_VENDOR_ID_INTEL)
return 1;
/* Some of Intel's USB controllers have a bug that causes false
* resume indications if any port has an over current condition.
* To prevent problems, we will not allow a global suspend if
* any ports are OC.
*
* Some motherboards using Intel's chipsets (but not using all
* the USB ports) appear to hardwire the over current inputs active
* to disable the USB ports.
*/
/* check for over current condition on any port */
for (i = 0; i < uhci->rh_numports; i++) {
if (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_OC)
return 0;
}
return 1;
}
static void reset_hc(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
/* Turn off PIRQ, SMI, and all interrupts. This also turns off
* the BIOS's USB Legacy Support.
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
outw(0, uhci->io_addr + USBINTR);
/* Global reset for 50ms */
uhci->state = UHCI_RESET;
outw(USBCMD_GRESET, io_addr + USBCMD);
msleep(50);
outw(0, io_addr + USBCMD);
/* Another 10ms delay */
msleep(10);
uhci->resume_detect = 0;
uhci->is_stopped = UHCI_IS_STOPPED;
}
static void suspend_hc(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
uhci->state = UHCI_SUSPENDED;
uhci->resume_detect = 0;
outw(USBCMD_EGSM, io_addr + USBCMD);
/* FIXME: Wait for the controller to actually stop */
uhci_get_current_frame_number(uhci);
uhci->is_stopped = UHCI_IS_STOPPED;
uhci_scan_schedule(uhci, NULL);
}
static void wakeup_hc(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
switch (uhci->state) {
case UHCI_SUSPENDED: /* Start the resume */
dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
/* Global resume for >= 20ms */
outw(USBCMD_FGR | USBCMD_EGSM, io_addr + USBCMD);
uhci->state = UHCI_RESUMING_1;
uhci->state_end = jiffies + msecs_to_jiffies(20);
uhci->is_stopped = 0;
break;
case UHCI_RESUMING_1: /* End global resume */
uhci->state = UHCI_RESUMING_2;
outw(0, io_addr + USBCMD);
/* Falls through */
case UHCI_RESUMING_2: /* Wait for EOP to be sent */
if (inw(io_addr + USBCMD) & USBCMD_FGR)
break;
/* Run for at least 1 second, and
* mark it configured with a 64-byte max packet */
uhci->state = UHCI_RUNNING_GRACE;
uhci->state_end = jiffies + HZ;
outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP,
io_addr + USBCMD);
break;
case UHCI_RUNNING_GRACE: /* Now allowed to suspend */
uhci->state = UHCI_RUNNING;
break;
default:
break;
}
}
static int start_hc(struct uhci_hcd *uhci)
{
unsigned long io_addr = uhci->io_addr;
int timeout = 10;
/*
* Reset the HC - this will force us to get a
* new notification of any already connected
* ports due to the virtual disconnect that it
* implies.
*/
outw(USBCMD_HCRESET, io_addr + USBCMD);
while (inw(io_addr + USBCMD) & USBCMD_HCRESET) {
if (--timeout < 0) {
dev_err(uhci_dev(uhci), "USBCMD_HCRESET timed out!\n");
return -ETIMEDOUT;
}
msleep(1);
}
/* Mark controller as running before we enable interrupts */
uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
/* Turn on PIRQ and all interrupts */
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
USBLEGSUP_DEFAULT);
outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
io_addr + USBINTR);
/* Start at frame 0 */
outw(0, io_addr + USBFRNUM);
outl(uhci->fl->dma_handle, io_addr + USBFLBASEADD);
/* Run and mark it configured with a 64-byte max packet */
uhci->state = UHCI_RUNNING_GRACE;
uhci->state_end = jiffies + HZ;
outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, io_addr + USBCMD);
uhci->is_stopped = 0;
return 0;
}
static void hc_state_transitions(struct uhci_hcd *uhci)
{
switch (uhci->state) {
case UHCI_RUNNING:
/* global suspend if nothing connected for 1 second */
if (!ports_active(uhci) && suspend_allowed(uhci)) {
uhci->state = UHCI_SUSPENDING_GRACE;
uhci->state_end = jiffies + HZ;
}
break;
case UHCI_SUSPENDING_GRACE:
if (ports_active(uhci))
uhci->state = UHCI_RUNNING;
else if (time_after_eq(jiffies, uhci->state_end))
suspend_hc(uhci);
break;
case UHCI_SUSPENDED:
/* wakeup if requested by a device */
if (uhci->resume_detect)
wakeup_hc(uhci);
break;
case UHCI_RESUMING_1:
case UHCI_RESUMING_2:
case UHCI_RUNNING_GRACE:
if (time_after_eq(jiffies, uhci->state_end))
wakeup_hc(uhci);
break;
default:
break;
}
}
static int init_stall_timer(struct usb_hcd *hcd);
static void stall_callback(unsigned long ptr)
{
struct usb_hcd *hcd = (struct usb_hcd *)ptr;
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
struct urb_priv *up;
unsigned long flags;
spin_lock_irqsave(&uhci->lock, flags);
uhci_scan_schedule(uhci, NULL);
list_for_each_entry(up, &uhci->urb_list, urb_list) {
struct urb *u = up->urb;
spin_lock(&u->lock);
/* Check if the FSBR timed out */
if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
uhci_fsbr_timeout(uhci, u);
spin_unlock(&u->lock);
}
/* Really disable FSBR */
if (!uhci->fsbr && uhci->fsbrtimeout && time_after_eq(jiffies, uhci->fsbrtimeout)) {
uhci->fsbrtimeout = 0;
uhci->skel_term_qh->link = UHCI_PTR_TERM;
}
/* Poll for and perform state transitions */
hc_state_transitions(uhci);
if (unlikely(uhci->suspended_ports && uhci->state != UHCI_SUSPENDED))
uhci_check_ports(uhci);
init_stall_timer(hcd);
spin_unlock_irqrestore(&uhci->lock, flags);
}
static int init_stall_timer(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
init_timer(&uhci->stall_timer);
uhci->stall_timer.function = stall_callback;
uhci->stall_timer.data = (unsigned long)hcd;
uhci->stall_timer.expires = jiffies + msecs_to_jiffies(100);
add_timer(&uhci->stall_timer);
return 0;
}
static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned long io_addr = uhci->io_addr;
unsigned short status;
/*
* Read the interrupt status, and write it back to clear the
* interrupt cause. Contrary to the UHCI specification, the
* "HC Halted" status bit is persistent: it is RO, not R/WC.
*/
status = inw(io_addr + USBSTS);
if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */
return IRQ_NONE;
outw(status, io_addr + USBSTS); /* Clear it */
if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
if (status & USBSTS_HSE)
dev_err(uhci_dev(uhci), "host system error, "
"PCI problems?\n");
if (status & USBSTS_HCPE)
dev_err(uhci_dev(uhci), "host controller process "
"error, something bad happened!\n");
if ((status & USBSTS_HCH) && uhci->state > 0) {
dev_err(uhci_dev(uhci), "host controller halted, "
"very bad!\n");
/* FIXME: Reset the controller, fix the offending TD */
}
}
if (status & USBSTS_RD)
uhci->resume_detect = 1;
spin_lock(&uhci->lock);
uhci_scan_schedule(uhci, regs);
spin_unlock(&uhci->lock);
return IRQ_HANDLED;
}
/*
* Store the current frame number in uhci->frame_number if the controller
* is runnning
*/
static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
{
if (!uhci->is_stopped)
uhci->frame_number = inw(uhci->io_addr + USBFRNUM);
}
/*
* De-allocate all resources
*/
static void release_uhci(struct uhci_hcd *uhci)
{
int i;
for (i = 0; i < UHCI_NUM_SKELQH; i++)
if (uhci->skelqh[i]) {
uhci_free_qh(uhci, uhci->skelqh[i]);
uhci->skelqh[i] = NULL;
}
if (uhci->term_td) {
uhci_free_td(uhci, uhci->term_td);
uhci->term_td = NULL;
}
if (uhci->qh_pool) {
dma_pool_destroy(uhci->qh_pool);
uhci->qh_pool = NULL;
}
if (uhci->td_pool) {
dma_pool_destroy(uhci->td_pool);
uhci->td_pool = NULL;
}
if (uhci->fl) {
dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
uhci->fl, uhci->fl->dma_handle);
uhci->fl = NULL;
}
if (uhci->dentry) {
debugfs_remove(uhci->dentry);
uhci->dentry = NULL;
}
}
static int uhci_reset(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
uhci->io_addr = (unsigned long) hcd->rsrc_start;
/* Kick BIOS off this hardware and reset, so we won't get
* interrupts from any previous setup.
*/
reset_hc(uhci);
return 0;
}
/*
* Allocate a frame list, and then setup the skeleton
*
* The hardware doesn't really know any difference
* in the queues, but the order does matter for the
* protocols higher up. The order is:
*
* - any isochronous events handled before any
* of the queues. We don't do that here, because
* we'll create the actual TD entries on demand.
* - The first queue is the interrupt queue.
* - The second queue is the control queue, split into low- and full-speed
* - The third queue is bulk queue.
* - The fourth queue is the bandwidth reclamation queue, which loops back
* to the full-speed control queue.
*/
static int uhci_start(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
int i, port;
unsigned io_size;
dma_addr_t dma_handle;
struct usb_device *udev;
struct dentry *dentry;
io_size = (unsigned) hcd->rsrc_len;
dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_debug_operations);
if (!dentry) {
dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
retval = -ENOMEM;
goto err_create_debug_entry;
}
uhci->dentry = dentry;
uhci->fsbr = 0;
uhci->fsbrtimeout = 0;
spin_lock_init(&uhci->lock);
INIT_LIST_HEAD(&uhci->qh_remove_list);
INIT_LIST_HEAD(&uhci->td_remove_list);
INIT_LIST_HEAD(&uhci->urb_remove_list);
INIT_LIST_HEAD(&uhci->urb_list);
INIT_LIST_HEAD(&uhci->complete_list);
init_waitqueue_head(&uhci->waitqh);
uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
&dma_handle, 0);
if (!uhci->fl) {
dev_err(uhci_dev(uhci), "unable to allocate "
"consistent memory for frame list\n");
goto err_alloc_fl;
}
memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
uhci->fl->dma_handle = dma_handle;
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
if (!uhci->td_pool) {
dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
goto err_create_td_pool;
}
uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
sizeof(struct uhci_qh), 16, 0);
if (!uhci->qh_pool) {
dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
goto err_create_qh_pool;
}
/* Initialize the root hub */
/* UHCI specs says devices must have 2 ports, but goes on to say */
/* they may have more but give no way to determine how many they */
/* have. However, according to the UHCI spec, Bit 7 is always set */
/* to 1. So we try to use this to our advantage */
for (port = 0; port < (io_size - 0x10) / 2; port++) {
unsigned int portstatus;
portstatus = inw(uhci->io_addr + 0x10 + (port * 2));
if (!(portstatus & 0x0080))
break;
}
if (debug)
dev_info(uhci_dev(uhci), "detected %d ports\n", port);
/* This is experimental so anything less than 2 or greater than 8 is */
/* something weird and we'll ignore it */
if (port < 2 || port > UHCI_RH_MAXCHILD) {
dev_info(uhci_dev(uhci), "port count misdetected? "
"forcing to 2 ports\n");
port = 2;
}
uhci->rh_numports = port;
udev = usb_alloc_dev(NULL, &hcd->self, 0);
if (!udev) {
dev_err(uhci_dev(uhci), "unable to allocate root hub\n");
goto err_alloc_root_hub;
}
uhci->term_td = uhci_alloc_td(uhci, udev);
if (!uhci->term_td) {
dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
goto err_alloc_term_td;
}
for (i = 0; i < UHCI_NUM_SKELQH; i++) {
uhci->skelqh[i] = uhci_alloc_qh(uhci, udev);
if (!uhci->skelqh[i]) {
dev_err(uhci_dev(uhci), "unable to allocate QH\n");
goto err_alloc_skelqh;
}
}
/*
* 8 Interrupt queues; link all higher int queues to int1,
* then link int1 to control and control to bulk
*/
uhci->skel_int128_qh->link =
uhci->skel_int64_qh->link =
uhci->skel_int32_qh->link =
uhci->skel_int16_qh->link =
uhci->skel_int8_qh->link =
uhci->skel_int4_qh->link =
uhci->skel_int2_qh->link =
cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
uhci->skel_term_qh->link = UHCI_PTR_TERM;
uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
/*
* Fill the frame list: make all entries point to the proper
* interrupt queue.
*
* The interrupt queues will be interleaved as evenly as possible.
* There's not much to be done about period-1 interrupts; they have
* to occur in every frame. But we can schedule period-2 interrupts
* in odd-numbered frames, period-4 interrupts in frames congruent
* to 2 (mod 4), and so on. This way each frame only has two
* interrupt QHs, which will help spread out bandwidth utilization.
*/
for (i = 0; i < UHCI_NUMFRAMES; i++) {
int irq;
/*
* ffs (Find First bit Set) does exactly what we need:
* 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[6],
* 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
* ffs > 6 => not on any high-period queue, so use
* skel_int1_qh = skelqh[7].
* Add UHCI_NUMFRAMES to insure at least one bit is set.
*/
irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
if (irq < 0)
irq = 7;
/* Only place we don't use the frame list routines */
uhci->fl->frame[i] = UHCI_PTR_QH |
cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
/*
* Some architectures require a full mb() to enforce completion of
* the memory writes above before the I/O transfers in start_hc().
*/
mb();
if ((retval = start_hc(uhci)) != 0)
goto err_alloc_skelqh;
init_stall_timer(hcd);
udev->speed = USB_SPEED_FULL;
if (usb_hcd_register_root_hub(udev, hcd) != 0) {
dev_err(uhci_dev(uhci), "unable to start root hub\n");
retval = -ENOMEM;
goto err_start_root_hub;
}
return 0;
/*
* error exits:
*/
err_start_root_hub:
reset_hc(uhci);
del_timer_sync(&uhci->stall_timer);
err_alloc_skelqh:
for (i = 0; i < UHCI_NUM_SKELQH; i++)
if (uhci->skelqh[i]) {
uhci_free_qh(uhci, uhci->skelqh[i]);
uhci->skelqh[i] = NULL;
}
uhci_free_td(uhci, uhci->term_td);
uhci->term_td = NULL;
err_alloc_term_td:
usb_put_dev(udev);
err_alloc_root_hub:
dma_pool_destroy(uhci->qh_pool);
uhci->qh_pool = NULL;
err_create_qh_pool:
dma_pool_destroy(uhci->td_pool);
uhci->td_pool = NULL;
err_create_td_pool:
dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
uhci->fl, uhci->fl->dma_handle);
uhci->fl = NULL;
err_alloc_fl:
debugfs_remove(uhci->dentry);
uhci->dentry = NULL;
err_create_debug_entry:
return retval;
}
static void uhci_stop(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
del_timer_sync(&uhci->stall_timer);
reset_hc(uhci);
spin_lock_irq(&uhci->lock);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);
release_uhci(uhci);
}
#ifdef CONFIG_PM
static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
spin_lock_irq(&uhci->lock);
/* Don't try to suspend broken motherboards, reset instead */
if (suspend_allowed(uhci))
suspend_hc(uhci);
else {
spin_unlock_irq(&uhci->lock);
reset_hc(uhci);
spin_lock_irq(&uhci->lock);
uhci_scan_schedule(uhci, NULL);
}
spin_unlock_irq(&uhci->lock);
return 0;
}
static int uhci_resume(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc;
pci_set_master(to_pci_dev(uhci_dev(uhci)));
spin_lock_irq(&uhci->lock);
if (uhci->state == UHCI_SUSPENDED) {
/*
* Some systems don't maintain the UHCI register values
* during a PM suspend/resume cycle, so reinitialize
* the Frame Number, Framelist Base Address, Interrupt
* Enable, and Legacy Support registers.
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
0);
outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC |
USBINTR_SP, uhci->io_addr + USBINTR);
uhci->resume_detect = 1;
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
USBLEGSUP_DEFAULT);
} else {
spin_unlock_irq(&uhci->lock);
reset_hc(uhci);
if ((rc = start_hc(uhci)) != 0)
return rc;
spin_lock_irq(&uhci->lock);
}
hcd->state = HC_STATE_RUNNING;
spin_unlock_irq(&uhci->lock);
return 0;
}
#endif
/* Wait until all the URBs for a particular device/endpoint are gone */
static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
struct usb_host_endpoint *ep)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
}
static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int frame_number;
unsigned long flags;
/* Minimize latency by avoiding the spinlock */
local_irq_save(flags);
rmb();
frame_number = (uhci->is_stopped ? uhci->frame_number :
inw(uhci->io_addr + USBFRNUM));
local_irq_restore(flags);
return frame_number;
}
static const char hcd_name[] = "uhci_hcd";
static const struct hc_driver uhci_driver = {
.description = hcd_name,
.product_desc = "UHCI Host Controller",
.hcd_priv_size = sizeof(struct uhci_hcd),
/* Generic hardware linkage */
.irq = uhci_irq,
.flags = HCD_USB11,
/* Basic lifecycle operations */
.reset = uhci_reset,
.start = uhci_start,
#ifdef CONFIG_PM
.suspend = uhci_suspend,
.resume = uhci_resume,
#endif
.stop = uhci_stop,
.urb_enqueue = uhci_urb_enqueue,
.urb_dequeue = uhci_urb_dequeue,
.endpoint_disable = uhci_hcd_endpoint_disable,
.get_frame_number = uhci_hcd_get_frame_number,
.hub_status_data = uhci_hub_status_data,
.hub_control = uhci_hub_control,
};
static const struct pci_device_id uhci_pci_ids[] = { {
/* handle any USB UHCI controller */
PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
.driver_data = (unsigned long) &uhci_driver,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
static struct pci_driver uhci_pci_driver = {
.name = (char *)hcd_name,
.id_table = uhci_pci_ids,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
.resume = usb_hcd_pci_resume,
#endif /* PM */
};
static int __init uhci_hcd_init(void)
{
int retval = -ENOMEM;
printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
if (usb_disabled())
return -ENODEV;
if (debug) {
errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
if (!errbuf)
goto errbuf_failed;
}
uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
if (!uhci_debugfs_root)
goto debug_failed;
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
sizeof(struct urb_priv), 0, 0, NULL, NULL);
if (!uhci_up_cachep)
goto up_failed;
retval = pci_register_driver(&uhci_pci_driver);
if (retval)
goto init_failed;
return 0;
init_failed:
if (kmem_cache_destroy(uhci_up_cachep))
warn("not all urb_priv's were freed!");
up_failed:
debugfs_remove(uhci_debugfs_root);
debug_failed:
kfree(errbuf);
errbuf_failed:
return retval;
}
static void __exit uhci_hcd_cleanup(void)
{
pci_unregister_driver(&uhci_pci_driver);
if (kmem_cache_destroy(uhci_up_cachep))
warn("not all urb_priv's were freed!");
debugfs_remove(uhci_debugfs_root);
kfree(errbuf);
}
module_init(uhci_hcd_init);
module_exit(uhci_hcd_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
