/*
* intel TCO vendor specific watchdog driver support
*
* (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*/
/*
* Includes, defines, variables, module parameters, ...
*/
/* Module and version information */
#define DRV_NAME "iTCO_vendor_support"
#define DRV_VERSION "1.04"
#define PFX DRV_NAME ": "
/* Includes */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/errno.h> /* For the -ENODEV/... values */
#include <linux/kernel.h> /* For printk/panic/... */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/ioport.h> /* For io-port access */
#include <linux/io.h> /* For inb/outb/... */
#include "iTCO_vendor.h"
/* iTCO defines */
#define SMI_EN (acpibase + 0x30) /* SMI Control and Enable Register */
#define TCOBASE (acpibase + 0x60) /* TCO base address */
#define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */
/* List of vendor support modes */
/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
#define SUPERMICRO_OLD_BOARD 1
/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
#define SUPERMICRO_NEW_BOARD 2
/* Broken BIOS */
#define BROKEN_BIOS 911
static int vendorsupport;
module_param(vendorsupport, int, 0);
MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
"911=Broken SMI BIOS");
/*
* Vendor Specific Support
*/
/*
* Vendor Support: 1
* Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
* iTCO chipset: ICH2
*
* Code contributed by: R. Seretny <lkpatches@paypc.com>
* Documentation obtained by R. Seretny from SuperMicro Technical Support
*
* To enable Watchdog function:
* BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
* This setting enables SMI to clear the watchdog expired flag.
* If BIOS or CPU fail which may cause SMI hang, then system will
* reboot. When application starts to use watchdog function,
* application has to take over the control from SMI.
*
* For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
* function.
*
* Note: The system will reboot when Expire Flag is set TWICE.
* So, if the watchdog timer is 20 seconds, then the maximum hang
* time is about 40 seconds, and the minimum hang time is about
* 20.6 seconds.
*/
static void supermicro_old_pre_start(unsigned long acpibase)
{
unsigned long val32;
/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
val32 = inl(SMI_EN);
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
outl(val32, SMI_EN); /* Needed to activate watchdog */
}
static void supermicro_old_pre_stop(unsigned long acpibase)
{
unsigned long val32;
/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
val32 = inl(SMI_EN);
val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
outl(val32, SMI_EN); /* Needed to deactivate watchdog */
}
/*
* Vendor Support: 2
* Board: Super Micro Computer Inc. P4SBx, P4DPx
* iTCO chipset: ICH4
*
* Code contributed by: R. Seretny <lkpatches@paypc.com>
* Documentation obtained by R. Seretny from SuperMicro Technical Support
*
* To enable Watchdog function:
* 1. BIOS
* For P4SBx:
* BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
* For P4DPx:
* BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
* This setting enables or disables Watchdog function. When enabled, the
* default watchdog timer is set to be 5 minutes (about 4m35s). It is
* enough to load and run the OS. The application (service or driver) has
* to take over the control once OS is running up and before watchdog
* expires.
*
* 2. JUMPER
* For P4SBx: JP39
* For P4DPx: JP37
* This jumper is used for safety. Closed is enabled. This jumper
* prevents user enables watchdog in BIOS by accident.
*
* To enable Watch Dog function, both BIOS and JUMPER must be enabled.
*
* The documentation lists motherboards P4SBx and P4DPx series as of
* 20-March-2002. However, this code works flawlessly with much newer
* motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
*
* The original iTCO driver as written does not actually reset the
* watchdog timer on these machines, as a result they reboot after five
* minutes.
*
* NOTE: You may leave the Watchdog function disabled in the SuperMicro
* BIOS to avoid a "boot-race"... This driver will enable watchdog
* functionality even if it's disabled in the BIOS once the /dev/watchdog
* file is opened.
*/
/* I/O Port's */
#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */
#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */
/* Control Register's */
#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */
#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */
#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */
#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */
#define SM_ENDWATCH 0xAA /* Watchdog lock control page */
#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */
/* (Bit 3: 0 = seconds, 1 = minutes */
#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */
#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */
/* Bit 6: timer is reset by kbd interrupt */
/* Bit 7: timer is reset by mouse interrupt */
static void supermicro_new_unlock_watchdog(void)
{
/* Write 0x87 to port 0x2e twice */
outb(SM_WATCHPAGE, SM_REGINDEX);
outb(SM_WATCHPAGE, SM_REGINDEX);
/* Switch to watchdog control page */
outb(SM_CTLPAGESW, SM_REGINDEX);
outb(SM_CTLPAGE, SM_DATAIO);
}
static void supermicro_new_lock_watchdog(void)
{
outb(SM_ENDWATCH, SM_REGINDEX);
}
static void supermicro_new_pre_start(unsigned int heartbeat)
{
unsigned int val;
supermicro_new_unlock_watchdog();
/* Watchdog timer setting needs to be in seconds*/
outb(SM_COUNTMODE, SM_REGINDEX);
val = inb(SM_DATAIO);
val &= 0xF7;
outb(val, SM_DATAIO);
/* Write heartbeat interval to WDOG */
outb(SM_WATCHTIMER, SM_REGINDEX);
outb((heartbeat & 255), SM_DATAIO);
/* Make sure keyboard/mouse interrupts don't interfere */
outb(SM_RESETCONTROL, SM_REGINDEX);
val = inb(SM_DATAIO);
val &= 0x3f;
outb(val, SM_DATAIO);
/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
outb(SM_WATCHENABLE, SM_REGINDEX);
val = inb(SM_DATAIO);
val |= 0x01;
outb(val, SM_DATAIO);
supermicro_new_lock_watchdog();
}
static void supermicro_new_pre_stop(void)
{
unsigned int val;
supermicro_new_unlock_watchdog();
/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
outb(SM_WATCHENABLE, SM_REGINDEX);
val = inb(SM_DATAIO);
val &= 0xFE;
outb(val, SM_DATAIO);
supermicro_new_lock_watchdog();
}
static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
{
supermicro_new_unlock_watchdog();
/* reset watchdog timeout to heartveat value */
outb(SM_WATCHTIMER, SM_REGINDEX);
outb((heartbeat & 255), SM_DATAIO);
supermicro_new_lock_watchdog();
}
/*
* Vendor Support: 911
* Board: Some Intel ICHx based motherboards
* iTCO chipset: ICH7+
*
* Some Intel motherboards have a broken BIOS implementation: i.e.
* the SMI handler clear's the TIMEOUT bit in the TC01_STS register
* and does not reload the time. Thus the TCO watchdog does not reboot
* the system.
*
* These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
* debugging: the SMI handler is quite simple - it tests value in
* TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
* the handler goes into an infinite loop, apparently to allow the
* second timeout and reboot. Otherwise it simply clears TIMEOUT bit
* in TCO1_STS and that's it.
* So the logic seems to be reversed, because it is hard to see how
* TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
* (other than a transitional effect).
*
* The only fix found to get the motherboard(s) to reboot is to put
* the glb_smi_en bit to 0. This is a dirty hack that bypasses the
* broken code by disabling Global SMI.
*
* WARNING: globally disabling SMI could possibly lead to dramatic
* problems, especially on laptops! I.e. various ACPI things where
* SMI is used for communication between OS and firmware.
*
* Don't use this fix if you don't need to!!!
*/
static void broken_bios_start(unsigned long acpibase)
{
unsigned long val32;
val32 = inl(SMI_EN);
/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI#
Bit 0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
val32 &= 0xffffdffe;
outl(val32, SMI_EN);
}
static void broken_bios_stop(unsigned long acpibase)
{
unsigned long val32;
val32 = inl(SMI_EN);
/* Bit 13: TCO_EN -> 1 = Enables TCO logic generating an SMI#
Bit 0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
val32 |= 0x00002001;
outl(val32, SMI_EN);
}
/*
* Generic Support Functions
*/
void iTCO_vendor_pre_start(unsigned long acpibase,
unsigned int heartbeat)
{
switch (vendorsupport) {
case SUPERMICRO_OLD_BOARD:
supermicro_old_pre_start(acpibase);
break;
case SUPERMICRO_NEW_BOARD:
supermicro_new_pre_start(heartbeat);
break;
case BROKEN_BIOS:
broken_bios_start(acpibase);
break;
}
}
EXPORT_SYMBOL(iTCO_vendor_pre_start);
void iTCO_vendor_pre_stop(unsigned long acpibase)
{
switch (vendorsupport) {
case SUPERMICRO_OLD_BOARD:
supermicro_old_pre_stop(acpibase);
break;
case SUPERMICRO_NEW_BOARD:
supermicro_new_pre_stop();
break;
case BROKEN_BIOS:
broken_bios_stop(acpibase);
break;
}
}
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
{
if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_set_heartbeat(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
{
if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_set_heartbeat(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
int iTCO_vendor_check_noreboot_on(void)
{
switch (vendorsupport) {
case SUPERMICRO_OLD_BOARD:
return 0;
default:
return 1;
}
}
EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
static int __init iTCO_vendor_init_module(void)
{
printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
return 0;
}
static void __exit iTCO_vendor_exit_module(void)
{
printk(KERN_INFO PFX "Module Unloaded\n");
}
module_init(iTCO_vendor_init_module);
module_exit(iTCO_vendor_exit_module);
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
"R. Seretny <lkpatches@paypc.com>");
MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
