/*
* xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration
*
* NOTE: The location and contents of this file are highly subject to change.
*
* Source for configuration-independent binaries (which link in a
* configuration-specific HAL library) must NEVER include this file.
* The HAL itself has historically included this file in some instances,
* but this is not appropriate either, because the HAL is meant to be
* core-specific but system independent.
*/
/*
* Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2.1 of the GNU Lesser General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* Further, this software is distributed without any warranty that it is
* free of the rightful claim of any third person regarding infringement
* or the like. Any license provided herein, whether implied or
* otherwise, applies only to this software file. Patent licenses, if
* any, provided herein do not apply to combinations of this program with
* other software, or any other product whatsoever.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this program; if not, write the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
* USA.
*/
#ifndef XTENSA_CONFIG_SYSTEM_H
#define XTENSA_CONFIG_SYSTEM_H
/*#include <xtensa/hal.h>*/
/*----------------------------------------------------------------------
DEVICE ADDRESSES
----------------------------------------------------------------------*/
/*
* Strange place to find these, but the configuration GUI
* allows moving these around to account for various core
* configurations. Specific boards (and their BSP software)
* will have specific meanings for these components.
*/
/* I/O Block areas: */
#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000
#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000
#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000
#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000
#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000
#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000
/* System ROM: */
#define XSHAL_ROM_VADDR 0xEE000000
#define XSHAL_ROM_PADDR 0xFE000000
#define XSHAL_ROM_SIZE 0x00400000
/* Largest available area (free of vectors): */
#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C
#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4
/* System RAM: */
#define XSHAL_RAM_VADDR 0xD0000000
#define XSHAL_RAM_PADDR 0x00000000
#define XSHAL_RAM_VSIZE 0x08000000
#define XSHAL_RAM_PSIZE 0x10000000
#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE
/* Largest available area (free of vectors): */
#define XSHAL_RAM_AVAIL_VADDR 0xD0000370
#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90
/*
* Shadow system RAM (same device as system RAM, at different address).
* (Emulation boards need this for the SONIC Ethernet driver
* when data caches are configured for writeback mode.)
* NOTE: on full MMU configs, this points to the BYPASS virtual address
* of system RAM, ie. is the same as XSHAL_RAM_* except that virtual
* addresses are viewed through the BYPASS static map rather than
* the CACHED static map.
*/
#define XSHAL_RAM_BYPASS_VADDR 0xD8000000
#define XSHAL_RAM_BYPASS_PADDR 0x00000000
#define XSHAL_RAM_BYPASS_PSIZE 0x08000000
/* Alternate system RAM (different device than system RAM): */
#define XSHAL_ALTRAM_VADDR 0xCEE00000
#define XSHAL_ALTRAM_PADDR 0xC0000000
#define XSHAL_ALTRAM_SIZE 0x00200000
/*----------------------------------------------------------------------
* DEVICE-ADDRESS DEPENDENT...
*
* Values written to CACHEATTR special register (or its equivalent)
* to enable and disable caches in various modes.
*----------------------------------------------------------------------*/
/*----------------------------------------------------------------------
BACKWARD COMPATIBILITY ...
----------------------------------------------------------------------*/
/*
* NOTE: the following two macros are DEPRECATED. Use the latter
* board-specific macros instead, which are specially tuned for the
* particular target environments' memory maps.
*/
#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */
#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */
/*----------------------------------------------------------------------
ISS (Instruction Set Simulator) SPECIFIC ...
----------------------------------------------------------------------*/
#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */
#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */
#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */
#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */
#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */
/* For Coware only: */
#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */
#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */
#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */
#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */
#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */
/* For BFM and other purposes: */
#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */
#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */
#define XSHAL_ISS_PIPE_REGIONS 0
#define XSHAL_ISS_SDRAM_REGIONS 0
/*----------------------------------------------------------------------
XT2000 BOARD SPECIFIC ...
----------------------------------------------------------------------*/
#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */
#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */
#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */
#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */
#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */
#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */
#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */
/*----------------------------------------------------------------------
VECTOR SIZES
----------------------------------------------------------------------*/
/*
* Sizes allocated to vectors by the system (memory map) configuration.
* These sizes are constrained by core configuration (eg. one vector's
* code cannot overflow into another vector) but are dependent on the
* system or board (or LSP) memory map configuration.
*
* Whether or not each vector happens to be in a system ROM is also
* a system configuration matter, sometimes useful, included here also:
*/
#define XSHAL_RESET_VECTOR_SIZE 0x000004E0
#define XSHAL_RESET_VECTOR_ISROM 1
#define XSHAL_USER_VECTOR_SIZE 0x0000001C
#define XSHAL_USER_VECTOR_ISROM 0
#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */
#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */
#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C
#define XSHAL_KERNEL_VECTOR_ISROM 0
#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */
#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */
#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0
#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0
#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180
#define XSHAL_WINDOW_VECTORS_ISROM 0
#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C
#define XSHAL_INTLEVEL2_VECTOR_ISROM 0
#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C
#define XSHAL_INTLEVEL3_VECTOR_ISROM 0
#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C
#define XSHAL_INTLEVEL4_VECTOR_ISROM 1
#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE
#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM
#endif /*XTENSA_CONFIG_SYSTEM_H*/
