#ifndef BLKTRACE_H
#define BLKTRACE_H
#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
#endif
/*
* Trace categories
*/
enum blktrace_cat {
BLK_TC_READ = 1 << 0, /* reads */
BLK_TC_WRITE = 1 << 1, /* writes */
BLK_TC_BARRIER = 1 << 2, /* barrier */
BLK_TC_SYNC = 1 << 3, /* sync IO */
BLK_TC_SYNCIO = BLK_TC_SYNC,
BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
BLK_TC_REQUEUE = 1 << 5, /* requeueing */
BLK_TC_ISSUE = 1 << 6, /* issue */
BLK_TC_COMPLETE = 1 << 7, /* completions */
BLK_TC_FS = 1 << 8, /* fs requests */
BLK_TC_PC = 1 << 9, /* pc requests */
BLK_TC_NOTIFY = 1 << 10, /* special message */
BLK_TC_AHEAD = 1 << 11, /* readahead */
BLK_TC_META = 1 << 12, /* metadata */
BLK_TC_DISCARD = 1 << 13, /* discard requests */
BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */
BLK_TC_END = 1 << 15, /* only 16-bits, reminder */
};
#define BLK_TC_SHIFT (16)
#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT)
/*
* Basic trace actions
*/
enum blktrace_act {
__BLK_TA_QUEUE = 1, /* queued */
__BLK_TA_BACKMERGE, /* back merged to existing rq */
__BLK_TA_FRONTMERGE, /* front merge to existing rq */
__BLK_TA_GETRQ, /* allocated new request */
__BLK_TA_SLEEPRQ, /* sleeping on rq allocation */
__BLK_TA_REQUEUE, /* request requeued */
__BLK_TA_ISSUE, /* sent to driver */
__BLK_TA_COMPLETE, /* completed by driver */
__BLK_TA_PLUG, /* queue was plugged */
__BLK_TA_UNPLUG_IO, /* queue was unplugged by io */
__BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */
__BLK_TA_INSERT, /* insert request */
__BLK_TA_SPLIT, /* bio was split */
__BLK_TA_BOUNCE, /* bio was bounced */
__BLK_TA_REMAP, /* bio was remapped */
__BLK_TA_ABORT, /* request aborted */
__BLK_TA_DRV_DATA, /* driver-specific binary data */
};
/*
* Notify events.
*/
enum blktrace_notify {
__BLK_TN_PROCESS = 0, /* establish pid/name mapping */
__BLK_TN_TIMESTAMP, /* include system clock */
__BLK_TN_MESSAGE, /* Character string message */
};
/*
* Trace actions in full. Additionally, read or write is masked
*/
#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_SPLIT (__BLK_TA_SPLIT)
#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE)
#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_IO_TRACE_MAGIC 0x65617400
#define BLK_IO_TRACE_VERSION 0x07
/*
* The trace itself
*/
struct blk_io_trace {
__u32 magic; /* MAGIC << 8 | version */
__u32 sequence; /* event number */
__u64 time; /* in microseconds */
__u64 sector; /* disk offset */
__u32 bytes; /* transfer length */
__u32 action; /* what happened */
__u32 pid; /* who did it */
__u32 device; /* device number */
__u32 cpu; /* on what cpu did it happen */
__u16 error; /* completion error */
__u16 pdu_len; /* length of data after this trace */
};
/*
* The remap event
*/
struct blk_io_trace_remap {
__be32 device;
__be32 device_from;
__be64 sector;
};
enum {
Blktrace_setup = 1,
Blktrace_running,
Blktrace_stopped,
};
#define BLKTRACE_BDEV_SIZE 32
/*
* User setup structure passed with BLKTRACESTART
*/
struct blk_user_trace_setup {
char name[BLKTRACE_BDEV_SIZE]; /* output */
__u16 act_mask; /* input */
__u32 buf_size; /* input */
__u32 buf_nr; /* input */
__u64 start_lba;
__u64 end_lba;
__u32 pid;
};
#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_IO_TRACE)
#include <linux/sysfs.h>
struct blk_trace {
int trace_state;
struct rchan *rchan;
unsigned long *sequence;
unsigned char *msg_data;
u16 act_mask;
u64 start_lba;
u64 end_lba;
u32 pid;
u32 dev;
struct dentry *dir;
struct dentry *dropped_file;
struct dentry *msg_file;
atomic_t dropped;
};
extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
extern void blk_trace_shutdown(struct request_queue *);
extern int do_blk_trace_setup(struct request_queue *q,
char *name, dev_t dev, struct blk_user_trace_setup *buts);
extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
/**
* blk_add_trace_msg - Add a (simple) message to the blktrace stream
* @q: queue the io is for
* @fmt: format to print message in
* args... Variable argument list for format
*
* Description:
* Records a (simple) message onto the blktrace stream.
*
* NOTE: BLK_TN_MAX_MSG characters are output at most.
* NOTE: Can not use 'static inline' due to presence of var args...
*
**/
#define blk_add_trace_msg(q, fmt, ...) \
do { \
struct blk_trace *bt = (q)->blk_trace; \
if (unlikely(bt)) \
__trace_note_message(bt, fmt, ##__VA_ARGS__); \
} while (0)
#define BLK_TN_MAX_MSG 128
extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
void *data, size_t len);
extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
char __user *arg);
extern int blk_trace_startstop(struct request_queue *q, int start);
extern int blk_trace_remove(struct request_queue *q);
extern struct attribute_group blk_trace_attr_group;
#else /* !CONFIG_BLK_DEV_IO_TRACE */
#define blk_trace_ioctl(bdev, cmd, arg) (-ENOTTY)
#define blk_trace_shutdown(q) do { } while (0)
#define do_blk_trace_setup(q, name, dev, buts) (-ENOTTY)
#define blk_add_driver_data(q, rq, data, len) do {} while (0)
#define blk_trace_setup(q, name, dev, arg) (-ENOTTY)
#define blk_trace_startstop(q, start) (-ENOTTY)
#define blk_trace_remove(q) (-ENOTTY)
#define blk_add_trace_msg(q, fmt, ...) do { } while (0)
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#endif /* __KERNEL__ */
#endif
