#ifndef _LINUX_FTRACE_H
#define _LINUX_FTRACE_H
#include <linux/linkage.h>
#include <linux/fs.h>
#include <linux/ktime.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kallsyms.h>
#ifdef CONFIG_FUNCTION_TRACER
extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
struct file *filp, void __user *buffer, size_t *lenp,
loff_t *ppos);
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
struct ftrace_ops {
ftrace_func_t func;
struct ftrace_ops *next;
};
extern int function_trace_stop;
/*
* Type of the current tracing.
*/
enum ftrace_tracing_type_t {
FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
FTRACE_TYPE_RETURN, /* Hook the return of the function */
};
/* Current tracing type, default is FTRACE_TYPE_ENTER */
extern enum ftrace_tracing_type_t ftrace_tracing_type;
/**
* ftrace_stop - stop function tracer.
*
* A quick way to stop the function tracer. Note this an on off switch,
* it is not something that is recursive like preempt_disable.
* This does not disable the calling of mcount, it only stops the
* calling of functions from mcount.
*/
static inline void ftrace_stop(void)
{
function_trace_stop = 1;
}
/**
* ftrace_start - start the function tracer.
*
* This function is the inverse of ftrace_stop. This does not enable
* the function tracing if the function tracer is disabled. This only
* sets the function tracer flag to continue calling the functions
* from mcount.
*/
static inline void ftrace_start(void)
{
function_trace_stop = 0;
}
/*
* The ftrace_ops must be a static and should also
* be read_mostly. These functions do modify read_mostly variables
* so use them sparely. Never free an ftrace_op or modify the
* next pointer after it has been registered. Even after unregistering
* it, the next pointer may still be used internally.
*/
int register_ftrace_function(struct ftrace_ops *ops);
int unregister_ftrace_function(struct ftrace_ops *ops);
void clear_ftrace_function(void);
extern void ftrace_stub(unsigned long a0, unsigned long a1);
#else /* !CONFIG_FUNCTION_TRACER */
# define register_ftrace_function(ops) do { } while (0)
# define unregister_ftrace_function(ops) do { } while (0)
# define clear_ftrace_function(ops) do { } while (0)
static inline void ftrace_kill(void) { }
static inline void ftrace_stop(void) { }
static inline void ftrace_start(void) { }
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_DYNAMIC_FTRACE
/* asm/ftrace.h must be defined for archs supporting dynamic ftrace */
#include <asm/ftrace.h>
enum {
FTRACE_FL_FREE = (1 << 0),
FTRACE_FL_FAILED = (1 << 1),
FTRACE_FL_FILTER = (1 << 2),
FTRACE_FL_ENABLED = (1 << 3),
FTRACE_FL_NOTRACE = (1 << 4),
FTRACE_FL_CONVERTED = (1 << 5),
FTRACE_FL_FROZEN = (1 << 6),
};
struct dyn_ftrace {
struct list_head list;
unsigned long ip; /* address of mcount call-site */
unsigned long flags;
struct dyn_arch_ftrace arch;
};
int ftrace_force_update(void);
void ftrace_set_filter(unsigned char *buf, int len, int reset);
/* defined in arch */
extern int ftrace_ip_converted(unsigned long ip);
extern int ftrace_dyn_arch_init(void *data);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
extern void ftrace_call(void);
extern void mcount_call(void);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
extern int ftrace_enable_ftrace_graph_caller(void);
extern int ftrace_disable_ftrace_graph_caller(void);
#else
static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
#endif
/**
* ftrace_make_nop - convert code into top
* @mod: module structure if called by module load initialization
* @rec: the mcount call site record
* @addr: the address that the call site should be calling
*
* This is a very sensitive operation and great care needs
* to be taken by the arch. The operation should carefully
* read the location, check to see if what is read is indeed
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
* The code segment at @rec->ip should be a caller to @addr
*
* Return must be:
* 0 on success
* -EFAULT on error reading the location
* -EINVAL on a failed compare of the contents
* -EPERM on error writing to the location
* Any other value will be considered a failure.
*/
extern int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr);
/**
* ftrace_make_call - convert a nop call site into a call to addr
* @rec: the mcount call site record
* @addr: the address that the call site should call
*
* This is a very sensitive operation and great care needs
* to be taken by the arch. The operation should carefully
* read the location, check to see if what is read is indeed
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
* The code segment at @rec->ip should be a nop
*
* Return must be:
* 0 on success
* -EFAULT on error reading the location
* -EINVAL on a failed compare of the contents
* -EPERM on error writing to the location
* Any other value will be considered a failure.
*/
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
/* May be defined in arch */
extern int ftrace_arch_read_dyn_info(char *buf, int size);
extern int skip_trace(unsigned long ip);
extern void ftrace_release(void *start, unsigned long size);
extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
#else
# define skip_trace(ip) ({ 0; })
# define ftrace_force_update() ({ 0; })
# define ftrace_set_filter(buf, len, reset) do { } while (0)
# define ftrace_disable_daemon() do { } while (0)
# define ftrace_enable_daemon() do { } while (0)
static inline void ftrace_release(void *start, unsigned long size) { }
#endif /* CONFIG_DYNAMIC_FTRACE */
/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);
static inline void tracer_disable(void)
{
#ifdef CONFIG_FUNCTION_TRACER
ftrace_enabled = 0;
#endif
}
/*
* Ftrace disable/restore without lock. Some synchronization mechanism
* must be used to prevent ftrace_enabled to be changed between
* disable/restore.
*/
static inline int __ftrace_enabled_save(void)
{
#ifdef CONFIG_FUNCTION_TRACER
int saved_ftrace_enabled = ftrace_enabled;
ftrace_enabled = 0;
return saved_ftrace_enabled;
#else
return 0;
#endif
}
static inline void __ftrace_enabled_restore(int enabled)
{
#ifdef CONFIG_FUNCTION_TRACER
ftrace_enabled = enabled;
#endif
}
#ifdef CONFIG_FRAME_POINTER
/* TODO: need to fix this for ARM */
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
# define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
#else
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
# define CALLER_ADDR1 0UL
# define CALLER_ADDR2 0UL
# define CALLER_ADDR3 0UL
# define CALLER_ADDR4 0UL
# define CALLER_ADDR5 0UL
# define CALLER_ADDR6 0UL
#endif
#ifdef CONFIG_IRQSOFF_TRACER
extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
#else
# define time_hardirqs_on(a0, a1) do { } while (0)
# define time_hardirqs_off(a0, a1) do { } while (0)
#endif
#ifdef CONFIG_PREEMPT_TRACER
extern void trace_preempt_on(unsigned long a0, unsigned long a1);
extern void trace_preempt_off(unsigned long a0, unsigned long a1);
#else
# define trace_preempt_on(a0, a1) do { } while (0)
# define trace_preempt_off(a0, a1) do { } while (0)
#endif
#ifdef CONFIG_TRACING
extern int ftrace_dump_on_oops;
extern void tracing_start(void);
extern void tracing_stop(void);
extern void ftrace_off_permanent(void);
extern void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
/**
* ftrace_printk - printf formatting in the ftrace buffer
* @fmt: the printf format for printing
*
* Note: __ftrace_printk is an internal function for ftrace_printk and
* the @ip is passed in via the ftrace_printk macro.
*
* This function allows a kernel developer to debug fast path sections
* that printk is not appropriate for. By scattering in various
* printk like tracing in the code, a developer can quickly see
* where problems are occurring.
*
* This is intended as a debugging tool for the developer only.
* Please refrain from leaving ftrace_printks scattered around in
* your code.
*/
# define ftrace_printk(fmt...) __ftrace_printk(_THIS_IP_, fmt)
extern int
__ftrace_printk(unsigned long ip, const char *fmt, ...)
__attribute__ ((format (printf, 2, 3)));
extern void ftrace_dump(void);
#else
static inline void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
static inline int
ftrace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 0)));
static inline void tracing_start(void) { }
static inline void tracing_stop(void) { }
static inline void ftrace_off_permanent(void) { }
static inline int
ftrace_printk(const char *fmt, ...)
{
return 0;
}
static inline void ftrace_dump(void) { }
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
extern void ftrace_init_module(struct module *mod,
unsigned long *start, unsigned long *end);
#else
static inline void ftrace_init(void) { }
static inline void
ftrace_init_module(struct module *mod,
unsigned long *start, unsigned long *end) { }
#endif
enum {
POWER_NONE = 0,
POWER_CSTATE = 1,
POWER_PSTATE = 2,
};
struct power_trace {
#ifdef CONFIG_POWER_TRACER
ktime_t stamp;
ktime_t end;
int type;
int state;
#endif
};
#ifdef CONFIG_POWER_TRACER
extern void trace_power_start(struct power_trace *it, unsigned int type,
unsigned int state);
extern void trace_power_mark(struct power_trace *it, unsigned int type,
unsigned int state);
extern void trace_power_end(struct power_trace *it);
#else
static inline void trace_power_start(struct power_trace *it, unsigned int type,
unsigned int state) { }
static inline void trace_power_mark(struct power_trace *it, unsigned int type,
unsigned int state) { }
static inline void trace_power_end(struct power_trace *it) { }
#endif
/*
* Structure that defines an entry function trace.
*/
struct ftrace_graph_ent {
unsigned long func; /* Current function */
int depth;
};
/*
* Structure that defines a return function trace.
*/
struct ftrace_graph_ret {
unsigned long func; /* Current function */
unsigned long long calltime;
unsigned long long rettime;
/* Number of functions that overran the depth limit for current task */
unsigned long overrun;
int depth;
};
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#define FTRACE_RETFUNC_DEPTH 50
#define FTRACE_RETSTACK_ALLOC_SIZE 32
/* Type of the callback handlers for tracing function graph*/
typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc);
extern void ftrace_graph_stop(void);
/* The current handlers in use */
extern trace_func_graph_ret_t ftrace_graph_return;
extern trace_func_graph_ent_t ftrace_graph_entry;
extern void unregister_ftrace_graph(void);
extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
#else
static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
#endif
#endif /* _LINUX_FTRACE_H */
