/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_SCATTERLIST_H
#define _LINUX_SCATTERLIST_H
#include <linux/string.h>
#include <linux/types.h>
#include <linux/bug.h>
#include <linux/mm.h>
#include <asm/io.h>
struct scatterlist {
unsigned long page_link;
unsigned int offset;
unsigned int length;
dma_addr_t dma_address;
#ifdef CONFIG_NEED_SG_DMA_LENGTH
unsigned int dma_length;
#endif
};
/*
* Since the above length field is an unsigned int, below we define the maximum
* length in bytes that can be stored in one scatterlist entry.
*/
#define SCATTERLIST_MAX_SEGMENT (UINT_MAX & PAGE_MASK)
/*
* These macros should be used after a dma_map_sg call has been done
* to get bus addresses of each of the SG entries and their lengths.
* You should only work with the number of sg entries dma_map_sg
* returns, or alternatively stop on the first sg_dma_len(sg) which
* is 0.
*/
#define sg_dma_address(sg) ((sg)->dma_address)
#ifdef CONFIG_NEED_SG_DMA_LENGTH
#define sg_dma_len(sg) ((sg)->dma_length)
#else
#define sg_dma_len(sg) ((sg)->length)
#endif
struct sg_table {
struct scatterlist *sgl; /* the list */
unsigned int nents; /* number of mapped entries */
unsigned int orig_nents; /* original size of list */
};
/*
* Notes on SG table design.
*
* We use the unsigned long page_link field in the scatterlist struct to place
* the page pointer AND encode information about the sg table as well. The two
* lower bits are reserved for this information.
*
* If bit 0 is set, then the page_link contains a pointer to the next sg
* table list. Otherwise the next entry is at sg + 1.
*
* If bit 1 is set, then this sg entry is the last element in a list.
*
* See sg_next().
*
*/
#define SG_CHAIN 0x01UL
#define SG_END 0x02UL
/*
* We overload the LSB of the page pointer to indicate whether it's
* a valid sg entry, or whether it points to the start of a new scatterlist.
* Those low bits are there for everyone! (thanks mason :-)
*/
#define sg_is_chain(sg) ((sg)->page_link & SG_CHAIN)
#define sg_is_last(sg) ((sg)->page_link & SG_END)
#define sg_chain_ptr(sg) \
((struct scatterlist *) ((sg)->page_link & ~(SG_CHAIN | SG_END)))
/**
* sg_assign_page - Assign a given page to an SG entry
* @sg: SG entry
* @page: The page
*
* Description:
* Assign page to sg entry. Also see sg_set_page(), the most commonly used
* variant.
*
**/
static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
{
unsigned long page_link = sg->page_link & (SG_CHAIN | SG_END);
/*
* In order for the low bit stealing approach to work, pages
* must be aligned at a 32-bit boundary as a minimum.
*/
BUG_ON((unsigned long) page & (SG_CHAIN | SG_END));
#ifdef CONFIG_DEBUG_SG
BUG_ON(sg_is_chain(sg));
#endif
sg->page_link = page_link | (unsigned long) page;
}
/**
* sg_set_page - Set sg entry to point at given page
* @sg: SG entry
* @page: The page
* @len: Length of data
* @offset: Offset into page
*
* Description:
* Use this function to set an sg entry pointing at a page, never assign
* the page directly. We encode sg table information in the lower bits
* of the page pointer. See sg_page() for looking up the page belonging
* to an sg entry.
*
**/
static inline void sg_set_page(struct scatterlist *sg, struct page *page,
unsigned int len, unsigned int offset)
{
sg_assign_page(sg, page);
sg->offset = offset;
sg->length = len;
}
static inline struct page *sg_page(struct scatterlist *sg)
{
#ifdef CONFIG_DEBUG_SG
BUG_ON(sg_is_chain(sg));
#endif
return (struct page *)((sg)->page_link & ~(SG_CHAIN | SG_END));
}
/**
* sg_set_buf - Set sg entry to point at given data
* @sg: SG entry
* @buf: Data
* @buflen: Data length
*
**/
static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
unsigned int buflen)
{
#ifdef CONFIG_DEBUG_SG
BUG_ON(!virt_addr_valid(buf));
#endif
sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
}
/*
* Loop over each sg element, following the pointer to a new list if necessary
*/
#define for_each_sg(sglist, sg, nr, __i) \
for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg))
/**
* sg_chain - Chain two sglists together
* @prv: First scatterlist
* @prv_nents: Number of entries in prv
* @sgl: Second scatterlist
*
* Description:
* Links @prv@ and @sgl@ together, to form a longer scatterlist.
*
**/
static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents,
struct scatterlist *sgl)
{
/*
* offset and length are unused for chain entry. Clear them.
*/
prv[prv_nents - 1].offset = 0;
prv[prv_nents - 1].length = 0;
/*
* Set lowest bit to indicate a link pointer, and make sure to clear
* the termination bit if it happens to be set.
*/
prv[prv_nents - 1].page_link = ((unsigned long) sgl | SG_CHAIN)
& ~SG_END;
}
/**
* sg_mark_end - Mark the end of the scatterlist
* @sg: SG entryScatterlist
*
* Description:
* Marks the passed in sg entry as the termination point for the sg
* table. A call to sg_next() on this entry will return NULL.
*
**/
static inline void sg_mark_end(struct scatterlist *sg)
{
/*
* Set termination bit, clear potential chain bit
*/
sg->page_link |= SG_END;
sg->page_link &= ~SG_CHAIN;
}
/**
* sg_unmark_end - Undo setting the end of the scatterlist
* @sg: SG entryScatterlist
*
* Description:
* Removes the termination marker from the given entry of the scatterlist.
*
**/
static inline void sg_unmark_end(struct scatterlist *sg)
{
sg->page_link &= ~SG_END;
}
/**
* sg_phys - Return physical address of an sg entry
* @sg: SG entry
*
* Description:
* This calls page_to_phys() on the page in this sg entry, and adds the
* sg offset. The caller must know that it is legal to call page_to_phys()
* on the sg page.
*
**/
static inline dma_addr_t sg_phys(struct scatterlist *sg)
{
return page_to_phys(sg_page(sg)) + sg->offset;
}
/**
* sg_virt - Return virtual address of an sg entry
* @sg: SG entry
*
* Description:
* This calls page_address() on the page in this sg entry, and adds the
* sg offset. The caller must know that the sg page has a valid virtual
* mapping.
*
**/
static inline void *sg_virt(struct scatterlist *sg)
{
return page_address(sg_page(sg)) + sg->offset;
}
/**
* sg_init_marker - Initialize markers in sg table
* @sgl: The SG table
* @nents: Number of entries in table
*
**/
static inline void sg_init_marker(struct scatterlist *sgl,
unsigned int nents)
{
sg_mark_end(&sgl[nents - 1]);
}
int sg_nents(struct scatterlist *sg);
int sg_nents_for_len(struct scatterlist *sg, u64 len);
struct scatterlist *sg_next(struct scatterlist *);
struct scatterlist *sg_last(struct scatterlist *s, unsigned int);
void sg_init_table(struct scatterlist *, unsigned int);
void sg_init_one(struct scatterlist *, const void *, unsigned int);
int sg_split(struct scatterlist *in, const int in_mapped_nents,
const off_t skip, const int nb_splits,
const size_t *split_sizes,
struct scatterlist **out, int *out_mapped_nents,
gfp_t gfp_mask);
typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t);
typedef void (sg_free_fn)(struct scatterlist *, unsigned int);
void __sg_free_table(struct sg_table *, unsigned int, unsigned int,
sg_free_fn *);
void sg_free_table(struct sg_table *);
int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int,
struct scatterlist *, unsigned int, gfp_t, sg_alloc_fn *);
int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);
int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
unsigned int n_pages, unsigned int offset,
unsigned long size, unsigned int max_segment,
gfp_t gfp_mask);
int sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
unsigned int n_pages, unsigned int offset,
unsigned long size, gfp_t gfp_mask);
#ifdef CONFIG_SGL_ALLOC
struct scatterlist *sgl_alloc_order(unsigned long long length,
unsigned int order, bool chainable,
gfp_t gfp, unsigned int *nent_p);
struct scatterlist *sgl_alloc(unsigned long long length, gfp_t gfp,
unsigned int *nent_p);
void sgl_free_n_order(struct scatterlist *sgl, int nents, int order);
void sgl_free_order(struct scatterlist *sgl, int order);
void sgl_free(struct scatterlist *sgl);
#endif /* CONFIG_SGL_ALLOC */
size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, void *buf,
size_t buflen, off_t skip, bool to_buffer);
size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
const void *buf, size_t buflen);
size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
void *buf, size_t buflen);
size_t sg_pcopy_from_buffer(struct scatterlist *sgl, unsigned int nents,
const void *buf, size_t buflen, off_t skip);
size_t sg_pcopy_to_buffer(struct scatterlist *sgl, unsigned int nents,
void *buf, size_t buflen, off_t skip);
size_t sg_zero_buffer(struct scatterlist *sgl, unsigned int nents,
size_t buflen, off_t skip);
/*
* Maximum number of entries that will be allocated in one piece, if
* a list larger than this is required then chaining will be utilized.
*/
#define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist))
/*
* The maximum number of SG segments that we will put inside a
* scatterlist (unless chaining is used). Should ideally fit inside a
* single page, to avoid a higher order allocation. We could define this
* to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The
* minimum value is 32
*/
#define SG_CHUNK_SIZE 128
/*
* Like SG_CHUNK_SIZE, but for archs that have sg chaining. This limit
* is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
*/
#ifdef CONFIG_ARCH_NO_SG_CHAIN
#define SG_MAX_SEGMENTS SG_CHUNK_SIZE
#else
#define SG_MAX_SEGMENTS 2048
#endif
#ifdef CONFIG_SG_POOL
void sg_free_table_chained(struct sg_table *table,
unsigned nents_first_chunk);
int sg_alloc_table_chained(struct sg_table *table, int nents,
struct scatterlist *first_chunk,
unsigned nents_first_chunk);
#endif
/*
* sg page iterator
*
* Iterates over sg entries page-by-page. On each successful iteration, you
* can call sg_page_iter_page(@piter) to get the current page.
* @piter->sg will point to the sg holding this page and @piter->sg_pgoffset to
* the page's page offset within the sg. The iteration will stop either when a
* maximum number of sg entries was reached or a terminating sg
* (sg_last(sg) == true) was reached.
*/
struct sg_page_iter {
struct scatterlist *sg; /* sg holding the page */
unsigned int sg_pgoffset; /* page offset within the sg */
/* these are internal states, keep away */
unsigned int __nents; /* remaining sg entries */
int __pg_advance; /* nr pages to advance at the
* next step */
};
/*
* sg page iterator for DMA addresses
*
* This is the same as sg_page_iter however you can call
* sg_page_iter_dma_address(@dma_iter) to get the page's DMA
* address. sg_page_iter_page() cannot be called on this iterator.
*/
struct sg_dma_page_iter {
struct sg_page_iter base;
};
bool __sg_page_iter_next(struct sg_page_iter *piter);
bool __sg_page_iter_dma_next(struct sg_dma_page_iter *dma_iter);
void __sg_page_iter_start(struct sg_page_iter *piter,
struct scatterlist *sglist, unsigned int nents,
unsigned long pgoffset);
/**
* sg_page_iter_page - get the current page held by the page iterator
* @piter: page iterator holding the page
*/
static inline struct page *sg_page_iter_page(struct sg_page_iter *piter)
{
return nth_page(sg_page(piter->sg), piter->sg_pgoffset);
}
/**
* sg_page_iter_dma_address - get the dma address of the current page held by
* the page iterator.
* @dma_iter: page iterator holding the page
*/
static inline dma_addr_t
sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
{
return sg_dma_address(dma_iter->base.sg) +
(dma_iter->base.sg_pgoffset << PAGE_SHIFT);
}
/**
* for_each_sg_page - iterate over the pages of the given sg list
* @sglist: sglist to iterate over
* @piter: page iterator to hold current page, sg, sg_pgoffset
* @nents: maximum number of sg entries to iterate over
* @pgoffset: starting page offset
*
* Callers may use sg_page_iter_page() to get each page pointer.
*/
#define for_each_sg_page(sglist, piter, nents, pgoffset) \
for (__sg_page_iter_start((piter), (sglist), (nents), (pgoffset)); \
__sg_page_iter_next(piter);)
/**
* for_each_sg_dma_page - iterate over the pages of the given sg list
* @sglist: sglist to iterate over
* @dma_iter: page iterator to hold current page
* @dma_nents: maximum number of sg entries to iterate over, this is the value
* returned from dma_map_sg
* @pgoffset: starting page offset
*
* Callers may use sg_page_iter_dma_address() to get each page's DMA address.
*/
#define for_each_sg_dma_page(sglist, dma_iter, dma_nents, pgoffset) \
for (__sg_page_iter_start(&(dma_iter)->base, sglist, dma_nents, \
pgoffset); \
__sg_page_iter_dma_next(dma_iter);)
/*
* Mapping sg iterator
*
* Iterates over sg entries mapping page-by-page. On each successful
* iteration, @miter->page points to the mapped page and
* @miter->length bytes of data can be accessed at @miter->addr. As
* long as an interation is enclosed between start and stop, the user
* is free to choose control structure and when to stop.
*
* @miter->consumed is set to @miter->length on each iteration. It
* can be adjusted if the user can't consume all the bytes in one go.
* Also, a stopped iteration can be resumed by calling next on it.
* This is useful when iteration needs to release all resources and
* continue later (e.g. at the next interrupt).
*/
#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */
#define SG_MITER_FROM_SG (1 << 2) /* nop */
struct sg_mapping_iter {
/* the following three fields can be accessed directly */
struct page *page; /* currently mapped page */
void *addr; /* pointer to the mapped area */
size_t length; /* length of the mapped area */
size_t consumed; /* number of consumed bytes */
struct sg_page_iter piter; /* page iterator */
/* these are internal states, keep away */
unsigned int __offset; /* offset within page */
unsigned int __remaining; /* remaining bytes on page */
unsigned int __flags;
};
void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
unsigned int nents, unsigned int flags);
bool sg_miter_skip(struct sg_mapping_iter *miter, off_t offset);
bool sg_miter_next(struct sg_mapping_iter *miter);
void sg_miter_stop(struct sg_mapping_iter *miter);
#endif /* _LINUX_SCATTERLIST_H */
