/*
* linux/drivers/char/serial_core.h
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
#include <linux/compiler.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/mutex.h>
#include <linux/sysrq.h>
#include <uapi/linux/serial_core.h>
#ifdef CONFIG_SERIAL_CORE_CONSOLE
#define uart_console(port) \
((port)->cons && (port)->cons->index == (port)->line)
#else
#define uart_console(port) ({ (void)port; 0; })
#endif
struct uart_port;
struct serial_struct;
struct device;
/*
* This structure describes all the operations that can be done on the
* physical hardware. See Documentation/serial/driver for details.
*/
struct uart_ops {
unsigned int (*tx_empty)(struct uart_port *);
void (*set_mctrl)(struct uart_port *, unsigned int mctrl);
unsigned int (*get_mctrl)(struct uart_port *);
void (*stop_tx)(struct uart_port *);
void (*start_tx)(struct uart_port *);
void (*throttle)(struct uart_port *);
void (*unthrottle)(struct uart_port *);
void (*send_xchar)(struct uart_port *, char ch);
void (*stop_rx)(struct uart_port *);
void (*enable_ms)(struct uart_port *);
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
void (*set_ldisc)(struct uart_port *, struct ktermios *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
/*
* Return a string describing the type of the port
*/
const char *(*type)(struct uart_port *);
/*
* Release IO and memory resources used by the port.
* This includes iounmap if necessary.
*/
void (*release_port)(struct uart_port *);
/*
* Request IO and memory resources used by the port.
* This includes iomapping the port if necessary.
*/
int (*request_port)(struct uart_port *);
void (*config_port)(struct uart_port *, int);
int (*verify_port)(struct uart_port *, struct serial_struct *);
int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct uart_port *);
void (*poll_put_char)(struct uart_port *, unsigned char);
int (*poll_get_char)(struct uart_port *);
#endif
};
#define NO_POLL_CHAR 0x00ff0000
#define UART_CONFIG_TYPE (1 << 0)
#define UART_CONFIG_IRQ (1 << 1)
struct uart_icount {
__u32 cts;
__u32 dsr;
__u32 rng;
__u32 dcd;
__u32 rx;
__u32 tx;
__u32 frame;
__u32 overrun;
__u32 parity;
__u32 brk;
__u32 buf_overrun;
};
typedef unsigned int __bitwise__ upf_t;
typedef unsigned int __bitwise__ upstat_t;
struct uart_port {
spinlock_t lock; /* port lock */
unsigned long iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
unsigned int (*get_mctrl)(struct uart_port *);
void (*set_mctrl)(struct uart_port *, unsigned int);
int (*startup)(struct uart_port *port);
void (*shutdown)(struct uart_port *port);
void (*throttle)(struct uart_port *port);
void (*unthrottle)(struct uart_port *port);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
void (*handle_break)(struct uart_port *);
int (*rs485_config)(struct uart_port *,
struct serial_rs485 *rs485);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
unsigned char unused1;
#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
#define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */
#define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */
#define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */
#define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */
#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
struct uart_state *state; /* pointer to parent state */
struct uart_icount icount; /* statistics */
struct console *cons; /* struct console, if any */
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
unsigned long sysrq; /* sysrq timeout */
#endif
/* flags must be updated while holding port mutex */
upf_t flags;
/*
* These flags must be equivalent to the flags defined in
* include/uapi/linux/tty_flags.h which are the userspace definitions
* assigned from the serial_struct flags in uart_set_info()
* [for bit definitions in the UPF_CHANGE_MASK]
*
* Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable
* except bit 15 (UPF_NO_TXEN_TEST) which is masked off.
* The remaining bits are serial-core specific and not modifiable by
* userspace.
*/
#define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ )
#define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ )
#define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ )
#define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ )
#define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ )
#define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ )
#define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ )
#define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ )
#define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ )
#define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ )
#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )
#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )
#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )
#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
/* Port has hardware-assisted h/w flow control */
#define UPF_AUTO_CTS ((__force upf_t) (1 << 20))
#define UPF_AUTO_RTS ((__force upf_t) (1 << 21))
#define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))
/* Port has hardware-assisted s/w flow control */
#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
#define UPF_BUG_THRE ((__force upf_t) (1 << 26))
/* The exact UART type is known and should not be probed. */
#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
#define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
#define UPF_DEAD ((__force upf_t) (1 << 30))
#define UPF_IOREMAP ((__force upf_t) (1 << 31))
#define __UPF_CHANGE_MASK 0x17fff
#define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK)
#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
#if __UPF_CHANGE_MASK > ASYNC_FLAGS
#error Change mask not equivalent to userspace-visible bit defines
#endif
/*
* Must hold termios_rwsem, port mutex and port lock to change;
* can hold any one lock to read.
*/
upstat_t status;
#define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0))
#define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1))
#define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2))
#define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3))
#define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4))
int hw_stopped; /* sw-assisted CTS flow state */
unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */
unsigned int type; /* port type */
const struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
unsigned int minor;
resource_size_t mapbase; /* for ioremap */
resource_size_t mapsize;
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char suspended;
unsigned char irq_wake;
unsigned char unused[2];
struct attribute_group *attr_group; /* port specific attributes */
const struct attribute_group **tty_groups; /* all attributes (serial core use only) */
struct serial_rs485 rs485;
void *private_data; /* generic platform data pointer */
};
static inline int serial_port_in(struct uart_port *up, int offset)
{
return up->serial_in(up, offset);
}
static inline void serial_port_out(struct uart_port *up, int offset, int value)
{
up->serial_out(up, offset, value);
}
/**
* enum uart_pm_state - power states for UARTs
* @UART_PM_STATE_ON: UART is powered, up and operational
* @UART_PM_STATE_OFF: UART is powered off
* @UART_PM_STATE_UNDEFINED: sentinel
*/
enum uart_pm_state {
UART_PM_STATE_ON = 0,
UART_PM_STATE_OFF = 3, /* number taken from ACPI */
UART_PM_STATE_UNDEFINED,
};
/*
* This is the state information which is persistent across opens.
*/
struct uart_state {
struct tty_port port;
enum uart_pm_state pm_state;
struct circ_buf xmit;
atomic_t refcount;
wait_queue_head_t remove_wait;
struct uart_port *uart_port;
};
#define UART_XMIT_SIZE PAGE_SIZE
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
struct module;
struct tty_driver;
struct uart_driver {
struct module *owner;
const char *driver_name;
const char *dev_name;
int major;
int minor;
int nr;
struct console *cons;
/*
* these are private; the low level driver should not
* touch these; they should be initialised to NULL
*/
struct uart_state *state;
struct tty_driver *tty_driver;
};
void uart_write_wakeup(struct uart_port *port);
/*
* Baud rate helpers.
*/
void uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int baud);
unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
struct ktermios *old, unsigned int min,
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
/* Base timer interval for polling */
static inline int uart_poll_timeout(struct uart_port *port)
{
int timeout = port->timeout;
return timeout > 6 ? (timeout / 2 - 2) : 1;
}
/*
* Console helpers.
*/
struct earlycon_device {
struct console *con;
struct uart_port port;
char options[16]; /* e.g., 115200n8 */
unsigned int baud;
};
struct earlycon_id {
char name[16];
char compatible[128];
int (*setup)(struct earlycon_device *, const char *options);
} __aligned(32);
extern const struct earlycon_id __earlycon_table[];
extern const struct earlycon_id __earlycon_table_end[];
#if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)
#define EARLYCON_USED_OR_UNUSED __used
#else
#define EARLYCON_USED_OR_UNUSED __maybe_unused
#endif
#define OF_EARLYCON_DECLARE(_name, compat, fn) \
static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \
EARLYCON_USED_OR_UNUSED __section(__earlycon_table) \
= { .name = __stringify(_name), \
.compatible = compat, \
.setup = fn }
#define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn)
extern int setup_earlycon(char *buf);
extern int of_setup_earlycon(const struct earlycon_id *match,
unsigned long node,
const char *options);
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
char **options);
void uart_parse_options(char *options, int *baud, int *parity, int *bits,
int *flow);
int uart_set_options(struct uart_port *port, struct console *co, int baud,
int parity, int bits, int flow);
struct tty_driver *uart_console_device(struct console *co, int *index);
void uart_console_write(struct uart_port *port, const char *s,
unsigned int count,
void (*putchar)(struct uart_port *, int));
/*
* Port/driver registration/removal
*/
int uart_register_driver(struct uart_driver *uart);
void uart_unregister_driver(struct uart_driver *uart);
int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_match_port(struct uart_port *port1, struct uart_port *port2);
/*
* Power Management
*/
int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
#define uart_circ_chars_pending(circ) \
(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
#define uart_circ_chars_free(circ) \
(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
static inline int uart_tx_stopped(struct uart_port *port)
{
struct tty_struct *tty = port->state->port.tty;
if (tty->stopped || port->hw_stopped)
return 1;
return 0;
}
static inline bool uart_cts_enabled(struct uart_port *uport)
{
return !!(uport->status & UPSTAT_CTS_ENABLE);
}
static inline bool uart_softcts_mode(struct uart_port *uport)
{
upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS;
return ((uport->status & mask) == UPSTAT_CTS_ENABLE);
}
/*
* The following are helper functions for the low level drivers.
*/
extern void uart_handle_dcd_change(struct uart_port *uport,
unsigned int status);
extern void uart_handle_cts_change(struct uart_port *uport,
unsigned int status);
extern void uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag);
#ifdef SUPPORT_SYSRQ
static inline int
uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
{
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
handle_sysrq(ch);
port->sysrq = 0;
return 1;
}
port->sysrq = 0;
}
return 0;
}
#else
#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
#endif
/*
* We do the SysRQ and SAK checking like this...
*/
static inline int uart_handle_break(struct uart_port *port)
{
struct uart_state *state = port->state;
if (port->handle_break)
port->handle_break(port);
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
port->sysrq = jiffies + HZ*5;
return 1;
}
port->sysrq = 0;
}
#endif
if (port->flags & UPF_SAK)
do_SAK(state->port.tty);
return 0;
}
/*
* UART_ENABLE_MS - determine if port should enable modem status irqs
*/
#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
#endif /* LINUX_SERIAL_CORE_H */
