/*
* Copyright 2011-2012, Pavel Zubarev <pavel.zubarev@gmail.com>
* Copyright 2011-2012, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
* Copyright 2011-2012, cozybit Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "ieee80211_i.h"
#include "mesh.h"
#include "driver-ops.h"
/* This is not in the standard. It represents a tolerable tbtt drift below
* which we do no TSF adjustment.
*/
#define TOFFSET_MINIMUM_ADJUSTMENT 10
/* This is not in the standard. It is a margin added to the
* Toffset setpoint to mitigate TSF overcorrection
* introduced by TSF adjustment latency.
*/
#define TOFFSET_SET_MARGIN 20
/* This is not in the standard. It represents the maximum Toffset jump above
* which we'll invalidate the Toffset setpoint and choose a new setpoint. This
* could be, for instance, in case a neighbor is restarted and its TSF counter
* reset.
*/
#define TOFFSET_MAXIMUM_ADJUSTMENT 800 /* 0.8 ms */
struct sync_method {
u8 method;
struct ieee80211_mesh_sync_ops ops;
};
/**
* mesh_peer_tbtt_adjusting - check if an mp is currently adjusting its TBTT
*
* @ie: information elements of a management frame from the mesh peer
*/
static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie)
{
return (ie->mesh_config->meshconf_cap &
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
}
void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
/* sdata->vif.bss_conf.beacon_int in 1024us units, 0.04% */
u64 beacon_int_fraction = sdata->vif.bss_conf.beacon_int * 1024 / 2500;
u64 tsf;
u64 tsfdelta;
spin_lock_bh(&ifmsh->sync_offset_lock);
if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
(long long) ifmsh->sync_offset_clockdrift_max);
tsfdelta = -ifmsh->sync_offset_clockdrift_max;
ifmsh->sync_offset_clockdrift_max = 0;
} else {
msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting by %llu\n",
(long long) ifmsh->sync_offset_clockdrift_max,
(unsigned long long) beacon_int_fraction);
tsfdelta = -beacon_int_fraction;
ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
if (local->ops->offset_tsf) {
drv_offset_tsf(local, sdata, tsfdelta);
} else {
tsf = drv_get_tsf(local, sdata);
if (tsf != -1ULL)
drv_set_tsf(local, sdata, tsf + tsfdelta);
}
}
static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
u16 stype,
struct ieee80211_mgmt *mgmt,
struct ieee802_11_elems *elems,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u64 t_t, t_r;
WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
/* standard mentions only beacons */
if (stype != IEEE80211_STYPE_BEACON)
return;
/*
* Get time when timestamp field was received. If we don't
* have rx timestamps, then use current tsf as an approximation.
* drv_get_tsf() must be called before entering the rcu-read
* section.
*/
if (ieee80211_have_rx_timestamp(rx_status))
t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
24 + 12 +
elems->total_len +
FCS_LEN,
24);
else
t_r = drv_get_tsf(local, sdata);
rcu_read_lock();
sta = sta_info_get(sdata, mgmt->sa);
if (!sta)
goto no_sync;
/* check offset sync conditions (13.13.2.2.1)
*
* TODO also sync to
* dot11MeshNbrOffsetMaxNeighbor non-peer non-MBSS neighbors
*/
if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
msync_dbg(sdata, "STA %pM : is adjusting TBTT\n",
sta->sta.addr);
goto no_sync;
}
/* Timing offset calculation (see 13.13.2.2.2) */
t_t = le64_to_cpu(mgmt->u.beacon.timestamp);
sta->mesh->t_offset = t_t - t_r;
if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) {
s64 t_clockdrift = sta->mesh->t_offset_setpoint - sta->mesh->t_offset;
msync_dbg(sdata,
"STA %pM : t_offset=%lld, t_offset_setpoint=%lld, t_clockdrift=%lld\n",
sta->sta.addr, (long long) sta->mesh->t_offset,
(long long) sta->mesh->t_offset_setpoint,
(long long) t_clockdrift);
if (t_clockdrift > TOFFSET_MAXIMUM_ADJUSTMENT ||
t_clockdrift < -TOFFSET_MAXIMUM_ADJUSTMENT) {
msync_dbg(sdata,
"STA %pM : t_clockdrift=%lld too large, setpoint reset\n",
sta->sta.addr,
(long long) t_clockdrift);
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
goto no_sync;
}
spin_lock_bh(&ifmsh->sync_offset_lock);
if (t_clockdrift > ifmsh->sync_offset_clockdrift_max)
ifmsh->sync_offset_clockdrift_max = t_clockdrift;
spin_unlock_bh(&ifmsh->sync_offset_lock);
} else {
sta->mesh->t_offset_setpoint = sta->mesh->t_offset - TOFFSET_SET_MARGIN;
set_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
msync_dbg(sdata,
"STA %pM : offset was invalid, t_offset=%lld\n",
sta->sta.addr,
(long long) sta->mesh->t_offset);
}
no_sync:
rcu_read_unlock();
}
static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata,
struct beacon_data *beacon)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 cap;
WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
WARN_ON(!rcu_read_lock_held());
cap = beacon->meshconf->meshconf_cap;
spin_lock_bh(&ifmsh->sync_offset_lock);
if (ifmsh->sync_offset_clockdrift_max > TOFFSET_MINIMUM_ADJUSTMENT) {
/* Since ajusting the tsf here would
* require a possibly blocking call
* to the driver tsf setter, we punt
* the tsf adjustment to the mesh tasklet
*/
msync_dbg(sdata,
"TBTT : kicking off TBTT adjustment with clockdrift_max=%lld\n",
ifmsh->sync_offset_clockdrift_max);
set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags);
ifmsh->adjusting_tbtt = true;
} else {
msync_dbg(sdata,
"TBTT : max clockdrift=%lld; too small to adjust\n",
(long long)ifmsh->sync_offset_clockdrift_max);
ifmsh->sync_offset_clockdrift_max = 0;
ifmsh->adjusting_tbtt = false;
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
beacon->meshconf->meshconf_cap = ifmsh->adjusting_tbtt ?
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING | cap :
~IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING & cap;
}
static const struct sync_method sync_methods[] = {
{
.method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
.ops = {
.rx_bcn_presp = &mesh_sync_offset_rx_bcn_presp,
.adjust_tbtt = &mesh_sync_offset_adjust_tbtt,
}
},
};
const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method)
{
int i;
for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) {
if (sync_methods[i].method == method)
return &sync_methods[i].ops;
}
return NULL;
}
