diff options
author | Vincent Cuissard | 2015-10-26 10:27:41 +0100 |
---|---|---|
committer | Samuel Ortiz | 2015-10-27 04:21:14 +0100 |
commit | b5b3e23e4cace008e1a30e8614a484d14dfd07a1 (patch) | |
tree | 451bd798e76313fb43dc654530374d4b3c6e3d5c /Documentation/devicetree/bindings/net/nfc | |
parent | NFC: nfcmrvl: configure head/tail room values per low level drivers (diff) | |
download | kernel-qcow2-linux-b5b3e23e4cace008e1a30e8614a484d14dfd07a1.tar.gz kernel-qcow2-linux-b5b3e23e4cace008e1a30e8614a484d14dfd07a1.tar.xz kernel-qcow2-linux-b5b3e23e4cace008e1a30e8614a484d14dfd07a1.zip |
NFC: nfcmrvl: add i2c driver
This driver adds the support of I2C-based Marvell NFC controller.
Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc')
-rw-r--r-- | Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt | 34 |
1 files changed, 33 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 7c4a0cc370cf..0fa20cc2c33c 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -1,7 +1,9 @@ * Marvell International Ltd. NCI NFC Controller Required properties: -- compatible: Should be "mrvl,nfc-uart". +- compatible: Should be: + - "mrvl,nfc-uart" for UART devices + - "mrvl,nfc-i2c" for I2C devices Optional SoC specific properties: - pinctrl-names: Contains only one value - "default". @@ -13,6 +15,12 @@ Optional UART-based chip specific properties: - flow-control: Specifies that the chip is using RTS/CTS. - break-control: Specifies that the chip needs specific break management. +Optional I2C-based chip specific properties: +- i2c-int-falling: Specifies that the chip read event shall be trigged on + falling edge. +- i2c-int-rising: Specifies that the chip read event shall be trigged on + rising edge. + Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { @@ -27,3 +35,27 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): flow-control; } }; + + +Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + nfcmrvli2c0: i2c@1 { + compatible = "mrvl,nfc-i2c"; + + reg = <0x8>; + + /* I2C INT configuration */ + interrupt-parent = <&gpio3>; + interrupts = <21 0>; + + /* I2C INT trigger configuration */ + i2c-int-rising; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; |