diff options
author | Rob Herring | 2018-05-15 01:42:37 +0200 |
---|---|---|
committer | Rob Herring | 2018-12-13 16:41:50 +0100 |
commit | 4d2bb3e65035954dce7c666616906004f2c049f8 (patch) | |
tree | d8312a9db531deb3dabbeef6856628ed73cbd734 /Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml | |
parent | dt-bindings: i2c: Convert i2c-gpio binding to json-schema (diff) | |
download | kernel-qcow2-linux-4d2bb3e65035954dce7c666616906004f2c049f8.tar.gz kernel-qcow2-linux-4d2bb3e65035954dce7c666616906004f2c049f8.tar.xz kernel-qcow2-linux-4d2bb3e65035954dce7c666616906004f2c049f8.zip |
dt-bindings: timer: Convert ARM timer bindings to json-schema
Convert ARM timers to DT schema format using json-schema.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml new file mode 100644 index 000000000000..c4ab59550fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM memory mapped architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> + +description: |+ + ARM cores may have a memory mapped architected timer, which provides up to 8 + frames with a physical and optional virtual timer per frame. + + The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs. + +properties: + compatible: + items: + - enum: + - arm,armv7-timer-mem + + reg: + maxItems: 1 + description: The control frame base address + + '#address-cells': + enum: [1, 2] + + '#size-cells': + const: 1 + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +patternProperties: + '^frame@[0-9a-z]*$': + description: A timer node has up to 8 frame sub-nodes, each with the following properties. + properties: + frame-number: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 7 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: physical timer irq + - description: virtual timer irq + + reg : + minItems: 1 + maxItems: 2 + items: + - description: 1st view base address + - description: 2nd optional view base address + + required: + - frame-number + - interrupts + - reg + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0>; + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1>; + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + }; + }; + +... |