Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Several cases of bug fixes in 'net' overlapping other changes in
'net-next-.

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 18 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 4e00e859e885..bfa461aaac99 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
index ba67b39939c1..71aeda1ca055 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@@ -26,13 +26,16 @@ Required properties:
 	- "sys"
 	- "legacy"
 	- "client"
-- resets: Must contain five entries for each entry in reset-names.
+- resets: Must contain seven entries for each entry in reset-names.
 	   See ../reset/reset.txt for details.
 - reset-names: Must include the following names
 	- "core"
 	- "mgmt"
 	- "mgmt-sticky"
 	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
 - pinctrl-names : The pin control state names
 - pinctrl-0: The "default" pinctrl state
 - #interrupt-cells: specifies the number of cells needed to encode an
@@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
 	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
 	reg-names = "axi-base", "apb-base";
 	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
 	phys = <&pcie_phy>;
 	phy-names = "pcie-phy";
 	pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index f9753c416974..b24583aa34c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -14,11 +14,6 @@ Required properies:
  - #size-cells	: The value of this property must be 1
  - ranges	: defines mapping between pin controller node (parent) to
    gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
  - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.
 
@@ -37,6 +32,11 @@ Required properties:
 
 Optional properties:
  - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.
 
 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>