diff options
| author | Icenowy Zheng | 2017-10-18 15:06:25 +0200 |
|---|---|---|
| committer | Maxime Ripard | 2017-10-20 09:51:35 +0200 |
| commit | 0ca12c1ee43ca2decd438e0c0d0550c84fa122c5 (patch) | |
| tree | 505063a66c14b4ceeac7e5cda273d99129795faf /arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | |
| parent | ARM: sun8i: r40: add USB host port nodes for R40 (diff) | |
| download | kernel-qcow2-linux-0ca12c1ee43ca2decd438e0c0d0550c84fa122c5.tar.gz kernel-qcow2-linux-0ca12c1ee43ca2decd438e0c0d0550c84fa122c5.tar.xz kernel-qcow2-linux-0ca12c1ee43ca2decd438e0c0d0550c84fa122c5.zip | |
ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra
On newer revisions of the Banana Pi M2 Ultra boards, the 5V power output
(used by HDMI, SATA and USB) is controller via a GPIO.
Add the regulator node for it.
Older revisions just have the 5V power output always on, and the GPIO is
reserved on these boards. So it won't affect the older revisions.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Diffstat (limited to 'arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 7b52608cebe6..035599d870b9 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -78,6 +78,15 @@ }; }; + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ |