Merge tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

Merge "Samsung exynos-cpuidle updates for v3.16" from Kukjin Kim:

- From Daniel Lezcano:
 This patchset relies on the cpm_pm notifier to initiate the
 powerdown sequence operations from pm.c instead cpuidle.c.
 Thus the cpuidle driver is no longer dependent from arch
 specific code as everything is called from the pm.c file.

* tag 'exynos-cpuidle' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (94 commits)
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ARM: EXYNOS: Fix S5P_WAKEUP_STAT call for cpuidle
  ARM: EXYNOS: Move some code inside the idle_finisher for cpuidle
  ARM: EXYNOS: Encapsulate register access inside a function for pm
  ARM: EXYNOS: Change function name prefix for cpuidle
  ARM: EXYNOS: Use cpuidle_register
  ARM: EXYNOS: Prevent forward declaration for cpuidle
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

12 files changed, 452 insertions, 30 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 377b7c364033..b20c46233bd9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 2f8bcd068d17..58ff8e28c74f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -129,12 +129,10 @@
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		#clock-cells = <1>;
+		clock-output-names = "cam_a_clkout", "cam_b_clkout";
 		ranges;
 
-		clock_cam: clock-controller {
-			 #clock-cells = <1>;
-		};
-
 		fimc_0: fimc@11800000 {
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
@@ -371,6 +369,8 @@
 		interrupts = <0 60 0>;
 		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
 		status = "disabled";
 	};
 
@@ -382,6 +382,8 @@
 		interrupts = <0 61 0>;
 		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
 		status = "disabled";
 	};
 
@@ -393,6 +395,8 @@
 		interrupts = <0 62 0>;
 		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
 		status = "disabled";
 	};
 
@@ -404,6 +408,8 @@
 		interrupts = <0 63 0>;
 		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
 		status = "disabled";
 	};
 
@@ -415,6 +421,8 @@
 		interrupts = <0 64 0>;
 		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
 		status = "disabled";
 	};
 
@@ -426,6 +434,8 @@
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 63e34b24b04f..9296dee10e26 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -28,6 +28,21 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 	};
 
+	sysram@02020000 {
+		smp-sysram@0 {
+			status = "disabled";
+		};
+
+		smp-sysram@5000 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x5000 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			status = "disabled";
+		};
+	};
+
 	mct@10050000 {
 		compatible = "none";
 	};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cacf6140dd2f..ee3001f38821 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,24 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x20000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x1f000 0x1000>;
+		};
+	};
+
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 9583563dd0ef..f621fd976815 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -20,7 +20,7 @@
 	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
 
 	aliases {
-		i2c8 = &i2c_ak8975;
+		i2c9 = &i2c_ak8975;
 	};
 
 	memory {
@@ -80,7 +80,24 @@
 			enable-active-high;
 		};
 
-		/* More to come */
+		cam_af_reg: voltage-regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_AF";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 4 0>;
+			enable-active-high;
+		};
+
+		cam_isp_core_reg: voltage-regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_ISP_CORE_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpm0 3 0>;
+			enable-active-high;
+			regulator-always-on;
+		};
 	};
 
 	gpio-keys {
@@ -140,6 +157,38 @@
 		};
 	};
 
+	i2c_0: i2c@13860000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5c73m3@3c {
+			compatible = "samsung,s5c73m3";
+			reg = <0x3c>;
+			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+			vdd-int-supply = <&buck9_reg>;
+			vddio-cis-supply = <&ldo9_reg>;
+			vdda-supply = <&ldo17_reg>;
+			vddio-host-supply = <&ldo18_reg>;
+			vdd-af-supply = <&cam_af_reg>;
+			vdd-reg-supply = <&cam_io_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_A_CLKOUT */
+			clocks = <&camera 0>;
+			clock-names = "cis_extclk";
+			port {
+				s5c73m3_ep: endpoint {
+					remote-endpoint = <&csis0_ep>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+
 	i2c@138D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -586,8 +635,8 @@
 		status = "okay";
 	};
 
-	camera {
-		pinctrl-0 = <&cam_port_b_clk_active>;
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 		pinctrl-names = "default";
 		status = "okay";
 
@@ -607,6 +656,23 @@
 			status = "okay";
 		};
 
+		csis_0: csis@11880000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <176000000>;
+
+			/* Camera C (3) MIPI CSI-2 (CSIS0) */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+
 		csis_1: csis@11890000 {
 			vddcore-supply = <&ldo8_reg>;
 			vddio-supply = <&ldo10_reg>;
@@ -647,10 +713,11 @@
 					reg = <0x10>;
 					svdda-supply = <&cam_io_reg>;
 					svddio-supply = <&ldo19_reg>;
+					afvdd-supply = <&ldo19_reg>;
 					clock-frequency = <24000000>;
 					/* CAM_B_CLKOUT */
-					clocks = <&clock_cam 1>;
-					clock-names = "mclk";
+					clocks = <&camera 1>;
+					clock-names = "extclk";
 					samsung,camclk-out = <1>;
 					gpios = <&gpm1 6 0>;
 
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c4a9306f8529..70e3765b51ee 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,6 +37,24 @@
 		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x40000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 37423314a028..e44693e2cfda 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -72,6 +72,24 @@
 		};
 	};
 
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x30000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x30000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
 	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
new file mode 100644
index 000000000000..fae33dddac39
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,147 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+};
+
+&pinctrl_0 {
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb57438..ba686e40eac7 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -624,6 +624,34 @@
 			samsung,pin-drv = <0>;
 		};
 
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		i2c7_hs_bus: i2c7-hs-bus {
 			samsung,pins = "gpb2-2", "gpb2-3";
 			samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c3a9a66c5767..3c530722e8dc 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -58,6 +58,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
@@ -65,6 +66,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
@@ -72,6 +74,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu3: cpu@3 {
@@ -79,6 +82,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
 			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu4: cpu@100 {
@@ -86,6 +90,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +98,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu6: cpu@102 {
@@ -100,6 +106,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
 		};
 
 		cpu7: cpu@103 {
@@ -107,6 +114,44 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cci@10d20000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10d20000 0x1000>;
+		ranges = <0x0 0x10d20000 0x6000>;
+
+		cci_control0: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+		cci_control1: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
 		};
 	};
 
@@ -125,7 +170,7 @@
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
 
-	codec@11000000 {
+	mfc: codec@11000000 {
 		compatible = "samsung,mfc-v7";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
@@ -169,7 +214,7 @@
 		status = "disabled";
 	};
 
-	mct@101C0000 {
+	mct: mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-controller;
@@ -270,7 +315,7 @@
 		interrupts = <0 47 0>;
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
@@ -430,22 +475,22 @@
 		status = "disabled";
 	};
 
-	serial@12C00000 {
+	uart_0: serial@12C00000 {
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C10000 {
+	uart_1: serial@12C10000 {
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C20000 {
+	uart_2: serial@12C20000 {
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	serial@12C30000 {
+	uart_3: serial@12C30000 {
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -465,14 +510,14 @@
 		#phy-cells = <0>;
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		clocks = <&clock CLK_DP1>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		samsung,power-domain = <&disp_pd>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
@@ -549,7 +594,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_I2C4>;
+		clocks = <&clock CLK_USI0>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -562,7 +607,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_I2C5>;
+		clocks = <&clock CLK_USI1>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -575,7 +620,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_I2C6>;
+		clocks = <&clock CLK_USI2>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -588,7 +633,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_I2C7>;
+		clocks = <&clock CLK_USI3>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -601,7 +646,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_I2C8>;
+		clocks = <&clock CLK_USI4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -614,7 +659,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_I2C9>;
+		clocks = <&clock CLK_USI5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -627,12 +672,12 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_I2C10>;
+		clocks = <&clock CLK_USI6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
 
-	hdmi@14530000 {
+	hdmi: hdmi@14530000 {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
@@ -644,7 +689,7 @@
 		status = "disabled";
 	};
 
-	mixer@14450000 {
+	mixer: mixer@14450000 {
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
@@ -715,7 +760,7 @@
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
 	};
 
-        watchdog@101D0000 {
+        watchdog: watchdog@101D0000 {
 		compatible = "samsung,exynos5420-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
@@ -724,7 +769,7 @@
 		samsung,syscon-phandle = <&pmu_system_controller>;
         };
 
-	sss@10830000 {
+	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x10000>;
 		interrupts = <0 112 0>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 59594cf15998..ea92fd69529a 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,6 +19,19 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial@50000000 {
 		status = "okay";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index e6555bdd81b8..955e4a4f8c31 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/s3c2443.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,53 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl@56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +83,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +94,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog@53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c@54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };