Merge tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux into next/dt2

From Jason Cooper:
mvebu dt for v3.10 round 4

 - mvebu LPAE 64bit dts file changes

* tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux: (52 commits)
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  arm: mvebu: PCIe Device Tree informations for Armada XP GP
  arm: mvebu: PCIe Device Tree informations for Armada 370 DB
  arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
  arm: mvebu: PCIe Device Tree informations for Armada XP DB
  arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
  arm: mvebu: add PCIe Device Tree informations for Armada XP
  arm: mvebu: add PCIe Device Tree informations for Armada 370
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

19 files changed, 1702 insertions, 870 deletions

diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index e34b280ce6ec..2353b1f13704 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -30,68 +30,87 @@
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			/*
-			 * This device is disabled by default, because
-			 * using the SD card connector requires
-			 * changing the default CON40 connector
-			 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-			 * different connector
-			 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-			 */
-			status = "disabled";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
-		};
+			spi0: spi@10600 {
+				status = "okay";
 
-		spi0: spi@d0010600 {
-			status = "okay";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "mx25l25635e";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+				};
+			};
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l25635e";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <50000000>;
+			pcie-controller {
+				status = "okay";
+				/*
+				 * The two PCIe units are accessible through
+				 * both standard PCIe slots and mini-PCIe
+				 * slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index dd0c57dd9f30..14e36e19d515 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -25,50 +25,116 @@
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		timer@d0020300 {
-			clock-frequency = <600000000>;
-			status = "okay";
-		};
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
 			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			pinctrl {
+				pwr_led_pin: pwr-led-pin {
+					marvell,pins = "mpp63";
+					marvell,function = "gpo";
+				};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+				stat_led_pins: stat-led-pins {
+					marvell,pins = "mpp64", "mpp65";
+					marvell,function = "gpio";
+				};
 			};
-		};
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
-			pinctrl-names = "default";
-			status = "okay";
-			/*
-			 * No CD or WP GPIOs: SDIO interface used for
-			 * Wifi/Bluetooth chip
-			 */
-		};
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
 
-		usb@d0050000 {
-			status = "okay";
-		};
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 1>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 1>;
+					linux,default-trigger = "cpu0";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 1>;
+					default-state = "off";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				/* Internal mini-PCIe connector */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+
+				/* Connected on the PCB to a USB 3.0 XHCI controller */
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 070bba4f2585..130f8390a7e4 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -28,49 +28,62 @@
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
+			gpio-keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				button@1 {
+					label = "Software Button";
+					linux,code = <116>;
+					gpios = <&gpio0 6 1>;
+				};
+			};
 		};
 	};
-};
+ };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 5b708208b607..272bbc65fab0 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -16,7 +16,7 @@
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "skeleton64.dtsi"
 
 / {
 	model = "Marvell Armada 370 and XP SoC";
@@ -28,159 +28,203 @@
 		};
 	};
 
-	mpic: interrupt-controller@d0020000 {
-	      compatible = "marvell,mpic";
-	      #interrupt-cells = <1>;
-	      #size-cells = <1>;
-	      interrupt-controller;
-	};
-
-	coherency-fabric@d0020200 {
-		compatible = "marvell,coherency-fabric";
-		reg = <0xd0020200 0xb0>,
-		      <0xd0021810 0x1c>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&mpic>;
-		ranges;
+		ranges = <0 0 0xd0000000 0x100000>;
 
-		serial@d0012000 {
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+			};
+
+			coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+			};
+
+			serial@12000 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012000 0x100>;
+				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-		serial@d0012100 {
+			};
+			serial@12100 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012100 0x100>;
+				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-
-		timer@d0020300 {
-			       compatible = "marvell,armada-370-xp-timer";
-			       reg = <0xd0020300 0x30>,
-			       <0xd0021040 0x30>;
-			       interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			       clocks = <&coreclk 2>;
-		};
-
-		addr-decoding@d0020000 {
-			compatible = "marvell,armada-addr-decoding-controller";
-			reg = <0xd0020000 0x258>;
-		};
-
-		sata@d00a0000 {
-			compatible = "marvell,orion-sata";
-			reg = <0xd00a0000 0x2400>;
-			interrupts = <55>;
-			clocks = <&gateclk 15>, <&gateclk 30>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-370-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+				clocks = <&coreclk 2>;
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
 
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,orion-mdio";
-			reg = <0xd0072004 0x4>;
-		};
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+			};
 
-		ethernet@d0070000 {
+			ethernet@70000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0070000 0x2500>;
+				reg = <0x70000 0x2500>;
 				interrupts = <8>;
 				clocks = <&gateclk 4>;
 				status = "disabled";
-		};
+			};
 
-		ethernet@d0074000 {
+			ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0074000 0x2500>;
+				reg = <0x74000 0x2500>;
 				interrupts = <10>;
 				clocks = <&gateclk 3>;
 				status = "disabled";
-		};
-
-		i2c0: i2c@d0011000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0xd0011000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <31>;
-			timeout-ms = <1000>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@d0011100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0xd0011100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			timeout-ms = <1000>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		rtc@10300 {
-			compatible = "marvell,orion-rtc";
-			reg = <0xd0010300 0x20>;
-			interrupts = <50>;
-		};
-
-		mvsdio@d00d4000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0xd00d4000 0x200>;
-			interrupts = <54>;
-			clocks = <&gateclk 17>;
-			status = "disabled";
-		};
-
-		usb@d0050000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0050000 0x500>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		usb@d0051000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0051000 0x500>;
-			interrupts = <46>;
-			status = "disabled";
-		};
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				status = "disabled";
+			};
 
-		spi0: spi@d0010600 {
-			compatible = "marvell,orion-spi";
-			reg = <0xd0010600 0x28>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <30>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
 
-		spi1: spi@d0010680 {
-			compatible = "marvell,orion-spi";
-			reg = <0xd0010680 0x28>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <92>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
+			usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <30>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <92>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-bootcs@10400 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10400 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs0@10408 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10408 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs1@10410 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10410 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs2@10418 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10418 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			devbus-cs3@10420 {
+				compatible = "marvell,mvebu-devbus";
+				reg = <0x10420 0x8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
 		};
 	};
-};
-
+ };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 8188d138020e..b2c1b5af9749 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -16,16 +16,11 @@
  */
 
 /include/ "armada-370-xp.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
-	L2: l2-cache {
-		compatible = "marvell,aurora-outer-cache";
-		reg = <0xd0008000 0x1000>;
-		cache-id-part = <0x100>;
-		wt-override;
-	};
 
 	aliases {
 		gpio0 = &gpio0;
@@ -33,125 +28,198 @@
 		gpio2 = &gpio2;
 	};
 
-	mpic: interrupt-controller@d0020000 {
-	      reg = <0xd0020a00 0x1d0>,
-		    <0xd0021870 0x58>;
-	};
-
 	soc {
-		system-controller@d0018200 {
+		ranges = <0 0xd0000000 0x100000>;
+		internal-regs {
+			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0xd0018200 0x100>;
-		};
-
-		pinctrl {
-			compatible = "marvell,mv88f6710-pinctrl";
-			reg = <0xd0018000 0x38>;
+				reg = <0x18200 0x100>;
+			};
 
-			sdio_pins1: sdio-pins1 {
-			      marvell,pins = "mpp9",  "mpp11", "mpp12",
-					     "mpp13", "mpp14", "mpp15";
-			      marvell,function = "sd0";
+			L2: l2-cache {
+				compatible = "marvell,aurora-outer-cache";
+				reg = <0xd0008000 0x1000>;
+				cache-id-part = <0x100>;
+				wt-override;
 			};
 
-			sdio_pins2: sdio-pins2 {
-			      marvell,pins = "mpp47", "mpp48", "mpp49",
-					     "mpp50", "mpp51", "mpp52";
-			      marvell,function = "sd0";
+			mpic: interrupt-controller@20000 {
+				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
 			};
-	        };
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
-		};
+			pinctrl {
+				compatible = "marvell,mv88f6710-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins1: sdio-pins1 {
+					marvell,pins = "mpp9",  "mpp11", "mpp12",
+							"mpp13", "mpp14", "mpp15";
+					marvell,function = "sd0";
+				};
+
+				sdio_pins2: sdio-pins2 {
+					marvell,pins = "mpp47", "mpp48", "mpp49",
+							"mpp50", "mpp51", "mpp52";
+					marvell,function = "sd0";
+				};
+
+				sdio_pins3: sdio-pins3 {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+							"mpp51", "mpp52", "mpp53";
+					marvell,function = "sd0";
+				};
+			};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
 
-		coreclk: mvebu-sar@d0018230 {
-			compatible = "marvell,armada-370-core-clock";
-			reg = <0xd0018230 0x08>;
-			#clock-cells = <1>;
-		};
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
 
-		gateclk: clock-gating-control@d0018220 {
-			compatible = "marvell,armada-370-gating-clock";
-			reg = <0xd0018220 0x4>;
-			clocks = <&coreclk 0>;
-			#clock-cells = <1>;
-		};
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
 
-		xor@d0060800 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060800 0x100
-			       0xd0060A00 0x100>;
-			status = "okay";
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-370-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
 
-			xor00 {
-				interrupts = <51>;
-				dmacap,memcpy;
-				dmacap,xor;
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
-			xor01 {
-				interrupts = <52>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
-		};
 
-		xor@d0060900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060900 0x100
-			       0xd0060b00 0x100>;
-			status = "okay";
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
 
-			xor10 {
-				interrupts = <94>;
-				dmacap,memcpy;
-				dmacap,xor;
+			usb@50000 {
+				clocks = <&coreclk 0>;
 			};
-			xor11 {
-				interrupts = <95>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			usb@51000 {
+				clocks = <&coreclk 0>;
 			};
-		};
 
-		usb@d0050000 {
-			clocks = <&coreclk 0>;
-		};
+			thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			clocks = <&coreclk 0>;
+			pcie-controller {
+				compatible = "marvell,armada-370-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				reg = <0x40000 0x2000>, <0x80000 0x2000>;
+
+				reg-names = "pcie0.0", "pcie1.0";
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 9>;
+					status = "disabled";
+				};
+			};
 		};
-
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index e83505e4c236..d6cc8bf8272e 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -26,99 +26,134 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012200 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012300 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
-			phy2: ethernet-phy@2 {
-				reg = <25>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <25>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <27>;
+				};
 			};
 
-			phy3: ethernet-phy@3 {
-				reg = <27>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "sgmii";
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+			};
 
-		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@d0050000 {
-			status = "okay";
-		};
+			usb@51000 {
+				status = "okay";
+			};
 
-		usb@d0051000 {
-			status = "okay";
-		};
+			usb@52000 {
+				status = "okay";
+			};
 
-		usb@d0052000 {
-			status = "okay";
-		};
+			spi0: spi@10600 {
+				status = "okay";
 
-		spi0: spi@d0010600 {
-			status = "okay";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p64";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+				};
+			};
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <20000000>;
+			pcie-controller {
+				status = "okay";
+
+				/*
+				 * All 6 slots are physically present as
+				 * standard PCIe slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@2,0 {
+					/* Port 0, Lane 1 */
+					status = "okay";
+				};
+				pcie@3,0 {
+					/* Port 0, Lane 2 */
+					status = "okay";
+				};
+				pcie@4,0 {
+					/* Port 0, Lane 3 */
+					status = "okay";
+				};
+				pcie@9,0 {
+					/* Port 2, Lane 0 */
+					status = "okay";
+				};
+				pcie@10,0 {
+					/* Port 3, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 1c8afe2ffebc..26ad06fc147e 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -26,87 +26,141 @@
 
 	memory {
 		device_type = "memory";
-
 		/*
-		 * 4 GB of plug-in RAM modules by default but only 3GB
-		 * are visible, the amount of memory available can be
-		 * changed by the bootloader according the size of the
-		 * module actually plugged
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. Only 7GB are usable because
+                 * addresses from 0xC0000000 to 0xffffffff are used by
+                 * the internal registers of the SoC.
 		 */
-		reg = <0x00000000 0xC0000000>;
+		reg = <0x00000000 0x00000000 0x00000000 0xC0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012200 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012300 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <16>;
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
-			phy1: ethernet-phy@1 {
-				reg = <17>;
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <16>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <17>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <18>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <19>;
+				};
 			};
 
-			phy2: ethernet-phy@2 {
-				reg = <18>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
 			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
 
-			phy3: ethernet-phy@3 {
-				reg = <19>;
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "rgmii-id";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "rgmii-id";
-		};
+			devbus-bootcs@10400 {
+				status = "okay";
+				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
+
+				/* Device Bus parameters are required */
+
+				/* Read parameters */
+				devbus,bus-width    = <8>;
+				devbus,turn-off-ps  = <60000>;
+				devbus,badr-skew-ps = <0>;
+				devbus,acc-first-ps = <124000>;
+				devbus,acc-next-ps  = <248000>;
+				devbus,rd-setup-ps  = <0>;
+				devbus,rd-hold-ps   = <0>;
+
+				/* Write parameters */
+				devbus,sync-enable = <0>;
+				devbus,wr-high-ps  = <60000>;
+				devbus,wr-low-ps   = <60000>;
+				devbus,ale-wr-ps   = <60000>;
+
+				/* NOR 16 MiB */
+				nor@0 {
+					compatible = "cfi-flash";
+					reg = <0 0x1000000>;
+					bank-width = <2>;
+				};
+			};
 
-		spi0: spi@d0010600 {
-			status = "okay";
+			pcie-controller {
+				status = "okay";
 
-			spi-flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "n25q128a13";
-				reg = <0>; /* Chip select 0 */
-				spi-max-frequency = <108000000>;
+				/*
+				 * The 3 slots are physically present as
+				 * standard PCIe slots on the board.
+				 */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+				pcie@9,0 {
+					/* Port 2, Lane 0 */
+					status = "okay";
+				};
+				pcie@10,0 {
+					/* Port 3, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f56c40599f5b..f8eaa383e07f 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -25,56 +25,162 @@
 	};
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+		};
 	};
 
 	soc {
-		pinctrl {
-			compatible = "marvell,mv78230-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78230-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
 			};
-		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+			};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>;
+			/*
+			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+			 * configured as x4 or quad x1 lanes. One unit is
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+#address-cells = <3>;
+#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index f8f2b787d2b0..f4029f015aff 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -26,75 +26,199 @@
 	};
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+		};
 	};
 
 	soc {
-		pinctrl {
-			compatible = "marvell,mv78260-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78260-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
 			};
-		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
-		};
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
-		};
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <3>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
-		};
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
 
-		ethernet@d0034000 {
+			ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
+				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
+			};
+
+			/*
+			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+			 * configured as x4 or quad x1 lanes. One unit is
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+
+				pcie@10,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+					reg = <0x5000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 103>;
+					marvell,pcie-port = <3>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 27>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 936c25dc32b0..6ab56bd35de9 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -27,89 +27,279 @@
 
 
 	cpus {
-	    #address-cells = <1>;
-	    #size-cells = <0>;
-
-	    cpu@0 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <0>;
-		clocks = <&cpuclk 0>;
-	    };
-
-	    cpu@1 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <1>;
-		clocks = <&cpuclk 1>;
-	    };
-
-	    cpu@2 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <2>;
-		clocks = <&cpuclk 2>;
-	    };
-
-	    cpu@3 {
-		device_type = "cpu";
-		compatible = "marvell,sheeva-v7";
-		reg = <3>;
-		clocks = <&cpuclk 3>;
-	    };
-	};
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	soc {
-		pinctrl {
-			compatible = "marvell,mv78460-pinctrl";
-			reg = <0xd0018000 0x38>;
-
-			sdio_pins: sdio-pins {
-				marvell,pins = "mpp30", "mpp31", "mpp32",
-					       "mpp33", "mpp34", "mpp35";
-				marvell,function = "sd0";
-			};
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
 		};
 
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
 		};
 
-		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
 		};
 
-		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
-			ngpios = <3>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupts-cells = <2>;
-			interrupts = <91>;
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
 		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv78460-pinctrl";
+				reg = <0x18000 0x38>;
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp30", "mpp31", "mpp32",
+						       "mpp33", "mpp34", "mpp35";
+					marvell,function = "sd0";
+				};
+			};
 
-		ethernet@d0034000 {
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupts-cells = <2>;
+				interrupts = <91>;
+			};
+
+			ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
+				reg = <0x34000 0x2500>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;
 				status = "disabled";
+			};
+
+			/*
+			 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+			 * configured as x4 or quad x1 lanes. Two units are
+			 * x4/x1.
+			 */
+			pcie-controller {
+				compatible = "marvell,armada-xp-pcie";
+				status = "disabled";
+				device_type = "pci";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				bus-range = <0x00 0xff>;
+
+				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
+					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
+					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
+					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
+					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
+					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
+					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
+					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
+					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+				pcie@1,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+					reg = <0x0800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 58>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 5>;
+					status = "disabled";
+				};
+
+				pcie@2,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+					reg = <0x1000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 59>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 6>;
+					status = "disabled";
+				};
+
+				pcie@3,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+					reg = <0x1800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 60>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 7>;
+					status = "disabled";
+				};
+
+				pcie@4,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+					reg = <0x2000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 61>;
+					marvell,pcie-port = <0>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 8>;
+					status = "disabled";
+				};
+
+				pcie@5,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 9>;
+					status = "disabled";
+				};
+
+				pcie@6,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+					reg = <0x3000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 63>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 10>;
+					status = "disabled";
+				};
+
+				pcie@7,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+					reg = <0x3800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 64>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 11>;
+					status = "disabled";
+				};
+
+				pcie@8,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+					reg = <0x4000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 65>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 12>;
+					status = "disabled";
+				};
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 26>;
+					status = "disabled";
+				};
+
+				pcie@10,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+					reg = <0x5000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 103>;
+					marvell,pcie-port = <3>;
+					marvell,pcie-lane = <0>;
+					clocks = <&gateclk 27>;
+					status = "disabled";
+				};
+			};
 		};
 	};
- };
+};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 3818a82176a2..f14d36c46159 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -23,121 +23,161 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0xC0000000>; /* 3 GB */
+		reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
 	};
 
 	soc {
-		serial@d0012000 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		serial@d0012100 {
-			clock-frequency = <250000000>;
-			status = "okay";
-		};
-		pinctrl {
-			led_pins: led-pins-0 {
-				marvell,pins = "mpp49", "mpp51", "mpp53";
-				marvell,function = "gpio";
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
-		};
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-names = "default";
-			pinctrl-0 = <&led_pins>;
-
-			red_led {
-				label = "red_led";
-				gpios = <&gpio1 17 1>;
-				default-state = "off";
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
 			};
-
-			yellow_led {
-				label = "yellow_led";
-				gpios = <&gpio1 19 1>;
-				default-state = "off";
+			pinctrl {
+				led_pins: led-pins-0 {
+					marvell,pins = "mpp49", "mpp51", "mpp53";
+					marvell,function = "gpio";
+				};
 			};
-
-			green_led {
-				label = "green_led";
-				gpios = <&gpio1 21 1>;
-				default-state = "off";
-				linux,default-trigger = "heartbeat";
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 1>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 1>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 1>;
+					default-state = "off";
+					linux,default-trigger = "heartbeat";
+				};
 			};
-		};
 
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			gpio_keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			button@1 {
-				label = "Init Button";
-				linux,code = <116>;
-				gpios = <&gpio1 28 0>;
+				button@1 {
+					label = "Init Button";
+					linux,code = <116>;
+					gpios = <&gpio1 28 0>;
+				};
 			};
-		};
 
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 
-			phy2: ethernet-phy@2 {
-				reg = <2>;
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
 			};
 
-			phy3: ethernet-phy@3 {
-				reg = <3>;
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+			usb@50000 {
+				status = "okay";
+			};
+			usb@51000 {
+				status = "okay";
 			};
-		};
 
-		ethernet@d0070000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0074000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0030000 {
-			status = "okay";
-			phy = <&phy2>;
-			phy-mode = "sgmii";
-		};
-		ethernet@d0034000 {
-			status = "okay";
-			phy = <&phy3>;
-			phy-mode = "sgmii";
-		};
-		i2c@d0011000 {
-			status = "okay";
-			clock-frequency = <400000>;
-		};
-		i2c@d0011100 {
-			status = "okay";
-			clock-frequency = <400000>;
+			devbus-bootcs@10400 {
+				status = "okay";
+				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
+
+				/* Device Bus parameters are required */
+
+				/* Read parameters */
+				devbus,bus-width    = <8>;
+				devbus,turn-off-ps  = <60000>;
+				devbus,badr-skew-ps = <0>;
+				devbus,acc-first-ps = <124000>;
+				devbus,acc-next-ps  = <248000>;
+				devbus,rd-setup-ps  = <0>;
+				devbus,rd-hold-ps   = <0>;
+
+				/* Write parameters */
+				devbus,sync-enable = <0>;
+				devbus,wr-high-ps  = <60000>;
+				devbus,wr-low-ps   = <60000>;
+				devbus,ale-wr-ps   = <60000>;
+
+				/* NOR 128 MiB */
+				nor@0 {
+					compatible = "cfi-flash";
+					reg = <0 0x8000000>;
+					bank-width = <2>;
+				};
+			};
 
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
+			pcie-controller {
+				status = "okay";
+				/* Internal mini-PCIe connector */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
 			};
 		};
-		sata@d00a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-		usb@d0050000 {
-			status = "okay";
-		};
-		usb@d0051000 {
-			status = "okay";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index ca00d8326c87..bacab11c10dc 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -22,134 +22,140 @@
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
-	L2: l2-cache {
-		compatible = "marvell,aurora-system-cache";
-		reg = <0xd0008000 0x1000>;
-		cache-id-part = <0x100>;
-		wt-override;
-	};
+	soc {
+		internal-regs {
+			L2: l2-cache {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				wt-override;
+			};
 
-	mpic: interrupt-controller@d0020000 {
-	      reg = <0xd0020a00 0x2d0>,
-		    <0xd0021070 0x58>;
-	};
+			mpic: interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
 
-	armada-370-xp-pmsu@d0022000 {
-		compatible = "marvell,armada-370-xp-pmsu";
-		reg = <0xd0022100 0x430>,
-		      <0xd0020800 0x20>;
-	};
+			armada-370-xp-pmsu@22000 {
+				compatible = "marvell,armada-370-xp-pmsu";
+				reg = <0x22100 0x430>, <0x20800 0x20>;
+			};
 
-	soc {
-		serial@d0012200 {
+			serial@12200 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012200 0x100>;
+				reg = <0x12200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
-		serial@d0012300 {
+			};
+			serial@12300 {
 				compatible = "snps,dw-apb-uart";
-				reg = <0xd0012300 0x100>;
+				reg = <0x12300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
 				reg-io-width = <1>;
 				status = "disabled";
-		};
+			};
 
-		timer@d0020300 {
+			timer@20300 {
 				marvell,timer-25Mhz;
-		};
+			};
 
-		coreclk: mvebu-sar@d0018230 {
-			compatible = "marvell,armada-xp-core-clock";
-			reg = <0xd0018230 0x08>;
-			#clock-cells = <1>;
-		};
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
 
-		cpuclk: clock-complex@d0018700 {
-			#clock-cells = <1>;
-			compatible = "marvell,armada-xp-cpu-clock";
-			reg = <0xd0018700 0xA0>;
-			clocks = <&coreclk 1>;
-		};
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0xA0>;
+				clocks = <&coreclk 1>;
+			};
 
-		gateclk: clock-gating-control@d0018220 {
-			compatible = "marvell,armada-xp-gating-clock";
-			reg = <0xd0018220 0x4>;
-			clocks = <&coreclk 0>;
-			#clock-cells = <1>;
-		};
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
 
-		system-controller@d0018200 {
+			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0xd0018200 0x500>;
-		};
+				reg = <0x18200 0x500>;
+			};
 
-		ethernet@d0030000 {
+			ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
-				reg = <0xd0030000 0x2500>;
+				reg = <0x30000 0x2500>;
 				interrupts = <12>;
 				clocks = <&gateclk 2>;
 				status = "disabled";
-		};
-
-		xor@d0060900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd0060900 0x100
-			       0xd0060b00 0x100>;
-			clocks = <&gateclk 22>;
-			status = "okay";
-
-			xor10 {
-				interrupts = <51>;
-				dmacap,memcpy;
-				dmacap,xor;
-			};
-			xor11 {
-				interrupts = <52>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
 			};
-		};
 
-		xor@d00f0900 {
-			compatible = "marvell,orion-xor";
-			reg = <0xd00F0900 0x100
-			       0xd00F0B00 0x100>;
-			clocks = <&gateclk 28>;
-			status = "okay";
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
 
-			xor00 {
-				interrupts = <94>;
-				dmacap,memcpy;
-				dmacap,xor;
+			xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
-			xor01 {
-				interrupts = <95>;
-				dmacap,memcpy;
-				dmacap,xor;
-				dmacap,memset;
+
+			usb@50000 {
+				clocks = <&gateclk 18>;
 			};
-		};
 
-		usb@d0050000 {
-			clocks = <&gateclk 18>;
-		};
+			usb@51000 {
+				clocks = <&gateclk 19>;
+			};
 
-		usb@d0051000 {
-			clocks = <&gateclk 19>;
-		};
+			usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
 
-		usb@d0052000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xd0052000 0x500>;
-			interrupts = <47>;
-			clocks = <&gateclk 20>;
-			status = "disabled";
+			thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
 		};
-
 	};
 };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index f7509cafc377..6cab46849cdb 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -50,6 +50,11 @@
 			#clock-cells = <1>;
 		};
 
+		thermal: thermal@d001c {
+			compatible = "marvell,dove-thermal";
+			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 192cf76fbf93..23991e45bc55 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -49,6 +49,12 @@
 			};
 		};
 
+		thermal@10078 {
+			compatible = "marvell,kirkwood-thermal";
+			reg = <0x10078 0x4>;
+			status = "okay";
+		};
+
 		i2c@11100 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11100 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index bd83b8fc7c83..c3573be7b92c 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -77,6 +77,7 @@
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 9555a86297c2..44fd97dfc1f3 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -69,6 +69,10 @@
 			status = "okay";
 			nr-ports = <1>;
 		};
+
+		mvsdio@90000 {
+			status = "okay";
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 93c3afbef9ee..3694e94f6e99 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -96,11 +96,11 @@
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -157,14 +157,14 @@
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 8aad00f81ed9..892c64e3f1e1 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -69,6 +74,20 @@
 			status = "okay";
 		};
 
+		ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		ehci@a0000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xa0000 0x1000>;
+			interrupts = <12>;
+			status = "disabled";
+		};
+
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
@@ -86,12 +105,31 @@
 			status = "disabled";
 		};
 
+		xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60b00 0x100>;
+			status = "okay";
+
+			xor00 {
+			      interrupts = <30>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <31>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
 		crypto@90000 {
 			compatible = "marvell,orion-crypto";
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi
new file mode 100644
index 000000000000..15994158a998
--- /dev/null
+++ b/arch/arm/boot/dts/skeleton64.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree in the 64 bits version; the bare minimum
+ * needed to boot; just include and add a compatible value.  The
+ * bootloader will typically populate the memory node.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};