Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits)
  Fix soc_common PCMCIA configuration
  ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request
  ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver
  ARM: 5825/1: SA1100: h3600: update defconfig
  ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100
  ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys
  ARM: 5822/1: SA1100: h3100/h3600: clean up #includes
  ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates
  ARM: 5820/1: SA1100: h3100/h3600: split h3600.c
  ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h
  ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions
  ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs
  ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions
  ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers
  ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
  ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver
  ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers
  ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib
  ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins
  ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h
  ...

1 files changed, 4 insertions, 58 deletions

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724d490d..615668986480 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
 #include <mach/cpu.h>
 
 #include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable()	do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define	AT91_SDRAMC	AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
 
 /*
  * Show the reason for the previous system reset.
@@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
+	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
@@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state)
 			 */
 			asm("b 1f; .align 5; 1:");
 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			sdram_selfrefresh_enable();
+			saved_lpr = sdram_selfrefresh_enable();
 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-			sdram_selfrefresh_disable();
+			sdram_selfrefresh_disable(saved_lpr);
 			break;
 
 		case PM_SUSPEND_ON: