Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 0 insertions, 255 deletions

diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
deleted file mode 100644
index ce1aad3eeeb9..000000000000
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-ahci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - AHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/ahci_platform.h>
-
-#include <plat/cpu.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-pmu.h>
-
-/* PHY Control Register */
-#define SATA_CTRL0		0x0
-/* PHY Link Control Register */
-#define SATA_CTRL1		0x4
-/* PHY Status Register */
-#define SATA_PHY_STATUS		0x8
-
-#define SATA_CTRL0_RX_DATA_VALID(x)	(x << 27)
-#define SATA_CTRL0_SPEED_MODE		(1 << 26)
-#define SATA_CTRL0_M_PHY_CAL		(1 << 19)
-#define SATA_CTRL0_PHY_CMU_RST_N	(1 << 10)
-#define SATA_CTRL0_M_PHY_LN_RST_N	(1 << 9)
-#define SATA_CTRL0_PHY_POR_N		(1 << 8)
-
-#define SATA_CTRL1_RST_PMALIVE_N	(1 << 8)
-#define SATA_CTRL1_RST_RXOOB_N		(1 << 7)
-#define SATA_CTRL1_RST_RX_N		(1 << 6)
-#define SATA_CTRL1_RST_TX_N		(1 << 5)
-
-#define SATA_PHY_STATUS_CMU_OK		(1 << 18)
-#define SATA_PHY_STATUS_LANE_OK		(1 << 16)
-
-#define LANE0		0x200
-#define COM_LANE	0xA00
-
-#define HOST_PORTS_IMPL	0xC
-#define SCLK_SATA_FREQ	(67 * MHZ)
-
-static void __iomem *phy_base, *phy_ctrl;
-
-struct phy_reg {
-	u8	reg;
-	u8	val;
-};
-
-/* SATA PHY setup */
-static const struct phy_reg exynos4_sataphy_cmu[] = {
-	{ 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
-	{ 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
-	{ 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
-	{ 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
-	{ 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
-	{ 0x6b, 0xc8 }, { 0x6c, 0x06 },
-};
-
-static const struct phy_reg exynos4_sataphy_lane[] = {
-	{ 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
-	{ 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
-	{ 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
-	{ 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
-	{ 0x51, 0x0f },
-};
-
-static const struct phy_reg exynos4_sataphy_comlane[] = {
-	{ 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
-	{ 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
-	{ 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
-	{ 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
-	{ 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
-	{ 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
-	{ 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
-	{ 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
-	{ 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
-	{ 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
-	{ 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
-	{ 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
-	{ 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
-	{ 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
-};
-
-static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
-{
-	unsigned long timeout;
-
-	/* wait for maximum of 3 sec */
-	timeout = jiffies + msecs_to_jiffies(3000);
-	while (!(__raw_readl(reg) & bit)) {
-		if (time_after(jiffies, timeout))
-			return -1;
-		cpu_relax();
-	}
-	return 0;
-}
-
-static int ahci_phy_init(void __iomem *mmio)
-{
-	int i, ctrl0;
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
-		__raw_writeb(exynos4_sataphy_cmu[i].val,
-		phy_base + (exynos4_sataphy_cmu[i].reg * 4));
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
-		__raw_writeb(exynos4_sataphy_lane[i].val,
-		phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
-		__raw_writeb(exynos4_sataphy_comlane[i].val,
-		phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
-
-	__raw_writeb(0x07, phy_base);
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
-				SATA_PHY_STATUS_CMU_OK) < 0) {
-		printk(KERN_ERR "PHY CMU not ready\n");
-		return -EBUSY;
-	}
-
-	__raw_writeb(0x03, phy_base + (COM_LANE * 4));
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
-				SATA_PHY_STATUS_LANE_OK) < 0) {
-		printk(KERN_ERR "PHY LANE not ready\n");
-		return -EBUSY;
-	}
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_M_PHY_CAL;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	return 0;
-}
-
-static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
-{
-	struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
-	int val, ret;
-
-	phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
-	if (!phy_base) {
-		dev_err(dev, "failed to allocate memory for SATA PHY\n");
-		return -ENOMEM;
-	}
-
-	phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
-	if (!phy_ctrl) {
-		dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	clk_sata = clk_get(dev, "sata");
-	if (IS_ERR(clk_sata)) {
-		dev_err(dev, "failed to get sata clock\n");
-		ret = PTR_ERR(clk_sata);
-		clk_sata = NULL;
-		goto err2;
-
-	}
-	clk_enable(clk_sata);
-
-	clk_sataphy = clk_get(dev, "sataphy");
-	if (IS_ERR(clk_sataphy)) {
-		dev_err(dev, "failed to get sataphy clock\n");
-		ret = PTR_ERR(clk_sataphy);
-		clk_sataphy = NULL;
-		goto err3;
-	}
-	clk_enable(clk_sataphy);
-
-	clk_sclk_sata = clk_get(dev, "sclk_sata");
-	if (IS_ERR(clk_sclk_sata)) {
-		dev_err(dev, "failed to get sclk_sata\n");
-		ret = PTR_ERR(clk_sclk_sata);
-		clk_sclk_sata = NULL;
-		goto err4;
-	}
-	clk_enable(clk_sclk_sata);
-	clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
-
-	__raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
-
-	/* Enable PHY link control */
-	val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
-			SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
-	__raw_writel(val, phy_ctrl + SATA_CTRL1);
-
-	/* Set communication speed as 3Gbps and enable PHY power */
-	val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
-			SATA_CTRL0_PHY_POR_N;
-	__raw_writel(val, phy_ctrl + SATA_CTRL0);
-
-	/* Port0 is available */
-	__raw_writel(0x1, mmio + HOST_PORTS_IMPL);
-
-	return ahci_phy_init(mmio);
-
-err4:
-	clk_disable(clk_sataphy);
-	clk_put(clk_sataphy);
-err3:
-	clk_disable(clk_sata);
-	clk_put(clk_sata);
-err2:
-	iounmap(phy_ctrl);
-err1:
-	iounmap(phy_base);
-
-	return ret;
-}
-
-static struct ahci_platform_data exynos4_ahci_pdata = {
-	.init = exynos4_ahci_init,
-};
-
-static struct resource exynos4_ahci_resource[] = {
-	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K),
-	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA),
-};
-
-static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ahci = {
-	.name		= "ahci",
-	.id		= -1,
-	.resource	= exynos4_ahci_resource,
-	.num_resources	= ARRAY_SIZE(exynos4_ahci_resource),
-	.dev		= {
-		.platform_data		= &exynos4_ahci_pdata,
-		.dma_mask		= &exynos4_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};