ARM: qcom: Split Qualcomm support into legacy and multiplatform

Introduce a new mach-qcom that will support SoCs that intend to be
multiplatform compatible while keeping mach-msm to legacy SoC/board
support that will not transition over to multiplatform.

As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
to mach-qcom.

Signed-off-by: Kumar Gala <galak@codeaurora.org>

1 files changed, 0 insertions, 137 deletions

diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index 251a91eb102a..000000000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref msm_cpu_die(unsigned int cpu)
-{
-	wfi();
-}
-#endif
-
-static inline int get_core_count(void)
-{
-	/* 1 + the PART[1:0] field of MIDR */
-	return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
-	int ret;
-	ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
-				SCM_FLAG_COLDBOOT_CPU1);
-	if (ret == 0) {
-		void __iomem *sc1_base_ptr;
-		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
-		if (sc1_base_ptr) {
-			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
-			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
-			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
-			iounmap(sc1_base_ptr);
-		}
-	} else
-		printk(KERN_DEBUG "Failed to set secondary core boot "
-				  "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	static int cold_boot_done;
-
-	/* Only need to bring cpu out of reset this way once */
-	if (cold_boot_done == false) {
-		prepare_cold_cpu(cpu);
-		cold_boot_done = true;
-	}
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
-	unsigned int i, ncores = get_core_count();
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
-	.smp_init_cpus		= msm_smp_init_cpus,
-	.smp_prepare_cpus	= msm_smp_prepare_cpus,
-	.smp_secondary_init	= msm_secondary_init,
-	.smp_boot_secondary	= msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= msm_cpu_die,
-#endif
-};