OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c

These CM_AUTOIDLE bits are now set by the clock code via the common PM
code in mach-omap2/pm.c.

N.B.: The pm24xx.c code that this patch removes didn't ensure that the
CM_AUTOIDLE bits were set for several 2430-only modules, such as
GPIO5, MDM_INTC, MMCHS1/2, the modem oscillator clock, and USBHS.
Similarly, the pm34xx.c code that this patch removes didn't ensure
that the CM_AUTOIDLE bits were set for USIM and the AM3517 UART4.
Those cases should now be handled.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

2 files changed, 5 insertions, 163 deletions

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index abe08f49b2ec..96907da1910a 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -379,7 +379,10 @@ static void __init prcm_setup_regs(void)
 	int i, num_mem_banks;
 	struct powerdomain *pwrdm;
 
-	/* Enable autoidle */
+	/*
+	 * Enable autoidle
+	 * XXX This should be handled by hwmod code or PRCM init code
+	 */
 	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
 			  OMAP2_PRCM_SYSCONFIG_OFFSET);
 
@@ -418,64 +421,6 @@ static void __init prcm_setup_regs(void)
 	clkdm_for_each(clkdms_setup, NULL);
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
-	/* Enable clock autoidle for all domains */
-	omap2_cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
-			       OMAP24XX_AUTO_MAILBOXES_MASK |
-			       OMAP24XX_AUTO_WDT4_MASK |
-			       OMAP2420_AUTO_WDT3_MASK |
-			       OMAP24XX_AUTO_MSPRO_MASK |
-			       OMAP2420_AUTO_MMC_MASK |
-			       OMAP24XX_AUTO_FAC_MASK |
-			       OMAP2420_AUTO_EAC_MASK |
-			       OMAP24XX_AUTO_HDQ_MASK |
-			       OMAP24XX_AUTO_UART2_MASK |
-			       OMAP24XX_AUTO_UART1_MASK |
-			       OMAP24XX_AUTO_I2C2_MASK |
-			       OMAP24XX_AUTO_I2C1_MASK |
-			       OMAP24XX_AUTO_MCSPI2_MASK |
-			       OMAP24XX_AUTO_MCSPI1_MASK |
-			       OMAP24XX_AUTO_MCBSP2_MASK |
-			       OMAP24XX_AUTO_MCBSP1_MASK |
-			       OMAP24XX_AUTO_GPT12_MASK |
-			       OMAP24XX_AUTO_GPT11_MASK |
-			       OMAP24XX_AUTO_GPT10_MASK |
-			       OMAP24XX_AUTO_GPT9_MASK |
-			       OMAP24XX_AUTO_GPT8_MASK |
-			       OMAP24XX_AUTO_GPT7_MASK |
-			       OMAP24XX_AUTO_GPT6_MASK |
-			       OMAP24XX_AUTO_GPT5_MASK |
-			       OMAP24XX_AUTO_GPT4_MASK |
-			       OMAP24XX_AUTO_GPT3_MASK |
-			       OMAP24XX_AUTO_GPT2_MASK |
-			       OMAP2420_AUTO_VLYNQ_MASK |
-			       OMAP24XX_AUTO_DSS_MASK,
-			       CORE_MOD, CM_AUTOIDLE1);
-	omap2_cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
-			       OMAP24XX_AUTO_SSI_MASK |
-			       OMAP24XX_AUTO_USB_MASK,
-			       CORE_MOD, CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
-			       OMAP24XX_AUTO_GPMC_MASK |
-			       OMAP24XX_AUTO_SDMA_MASK,
-			       CORE_MOD, CM_AUTOIDLE3);
-	omap2_cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
-			       OMAP24XX_AUTO_AES_MASK |
-			       OMAP24XX_AUTO_RNG_MASK |
-			       OMAP24XX_AUTO_SHA_MASK |
-			       OMAP24XX_AUTO_DES_MASK,
-			       CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
-
-	omap2_cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
-			       CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
-			       OMAP24XX_AUTO_WDT1_MASK |
-			       OMAP24XX_AUTO_MPU_WDT_MASK |
-			       OMAP24XX_AUTO_GPIOS_MASK |
-			       OMAP24XX_AUTO_32KSYNC_MASK |
-			       OMAP24XX_AUTO_GPT1_MASK,
-			       WKUP_MOD, CM_AUTOIDLE);
-
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
 	 * stabilisation */
 	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a99f296bdbfd..3d6a00e07a5b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -688,14 +688,11 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
-	u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_AUTO_UART4_MASK : 0;
 	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
 					OMAP3630_EN_UART4_MASK : 0;
 	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
 					OMAP3630_GRPSEL_UART4_MASK : 0;
 
-
 	/* XXX Reset all wkdeps. This should be done when initializing
 	 * powerdomains */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@@ -710,107 +707,7 @@ static void __init prcm_setup_regs(void)
 	} else
 		omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
 
-	/*
-	 * Enable interface clock autoidle for all modules.
-	 * Note that in the long run this should be done by clockfw
-	 */
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_MODEM_MASK |
-		OMAP3430ES2_AUTO_MMC3_MASK |
-		OMAP3430ES2_AUTO_ICR_MASK |
-		OMAP3430_AUTO_AES2_MASK |
-		OMAP3430_AUTO_SHA12_MASK |
-		OMAP3430_AUTO_DES2_MASK |
-		OMAP3430_AUTO_MMC2_MASK |
-		OMAP3430_AUTO_MMC1_MASK |
-		OMAP3430_AUTO_MSPRO_MASK |
-		OMAP3430_AUTO_HDQ_MASK |
-		OMAP3430_AUTO_MCSPI4_MASK |
-		OMAP3430_AUTO_MCSPI3_MASK |
-		OMAP3430_AUTO_MCSPI2_MASK |
-		OMAP3430_AUTO_MCSPI1_MASK |
-		OMAP3430_AUTO_I2C3_MASK |
-		OMAP3430_AUTO_I2C2_MASK |
-		OMAP3430_AUTO_I2C1_MASK |
-		OMAP3430_AUTO_UART2_MASK |
-		OMAP3430_AUTO_UART1_MASK |
-		OMAP3430_AUTO_GPT11_MASK |
-		OMAP3430_AUTO_GPT10_MASK |
-		OMAP3430_AUTO_MCBSP5_MASK |
-		OMAP3430_AUTO_MCBSP1_MASK |
-		OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
-		OMAP3430_AUTO_MAILBOXES_MASK |
-		OMAP3430_AUTO_OMAPCTRL_MASK |
-		OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
-		OMAP3430_AUTO_HSOTGUSB_MASK |
-		OMAP3430_AUTO_SAD2D_MASK |
-		OMAP3430_AUTO_SSI_MASK,
-		CORE_MOD, CM_AUTOIDLE1);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_PKA_MASK |
-		OMAP3430_AUTO_AES1_MASK |
-		OMAP3430_AUTO_RNG_MASK |
-		OMAP3430_AUTO_SHA11_MASK |
-		OMAP3430_AUTO_DES1_MASK,
-		CORE_MOD, CM_AUTOIDLE2);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		omap2_cm_write_mod_reg(
-			OMAP3430_AUTO_MAD2D_MASK |
-			OMAP3430ES2_AUTO_USBTLL_MASK,
-			CORE_MOD, CM_AUTOIDLE3);
-	}
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_WDT2_MASK |
-		OMAP3430_AUTO_WDT1_MASK |
-		OMAP3430_AUTO_GPIO1_MASK |
-		OMAP3430_AUTO_32KSYNC_MASK |
-		OMAP3430_AUTO_GPT12_MASK |
-		OMAP3430_AUTO_GPT1_MASK,
-		WKUP_MOD, CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_DSS_MASK,
-		OMAP3430_DSS_MOD,
-		CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		OMAP3430_AUTO_CAM_MASK,
-		OMAP3430_CAM_MOD,
-		CM_AUTOIDLE);
-
-	omap2_cm_write_mod_reg(
-		omap3630_auto_uart4_mask |
-		OMAP3430_AUTO_GPIO6_MASK |
-		OMAP3430_AUTO_GPIO5_MASK |
-		OMAP3430_AUTO_GPIO4_MASK |
-		OMAP3430_AUTO_GPIO3_MASK |
-		OMAP3430_AUTO_GPIO2_MASK |
-		OMAP3430_AUTO_WDT3_MASK |
-		OMAP3430_AUTO_UART3_MASK |
-		OMAP3430_AUTO_GPT9_MASK |
-		OMAP3430_AUTO_GPT8_MASK |
-		OMAP3430_AUTO_GPT7_MASK |
-		OMAP3430_AUTO_GPT6_MASK |
-		OMAP3430_AUTO_GPT5_MASK |
-		OMAP3430_AUTO_GPT4_MASK |
-		OMAP3430_AUTO_GPT3_MASK |
-		OMAP3430_AUTO_GPT2_MASK |
-		OMAP3430_AUTO_MCBSP4_MASK |
-		OMAP3430_AUTO_MCBSP3_MASK |
-		OMAP3430_AUTO_MCBSP2_MASK,
-		OMAP3430_PER_MOD,
-		CM_AUTOIDLE);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		omap2_cm_write_mod_reg(
-			OMAP3430ES2_AUTO_USBHOST_MASK,
-			OMAP3430ES2_USBHOST_MOD,
-			CM_AUTOIDLE);
-	}
-
+	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	/*