Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...

12 files changed, 981 insertions, 72 deletions

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ce2701e37d00..48a83f882947 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,8 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
@@ -10,4 +12,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
new file mode 100644
index 000000000000..246c317f6a68
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_gpio>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x25>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cae341554486..be2bfbc6b483 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -318,7 +318,7 @@
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 2>, <&dmac 3>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 		reg-io-width = <4>;
@@ -333,7 +333,7 @@
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "sclk_uart", "pclk_uart";
 		dmas = <&dmac 4>, <&dmac 5>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
 		reg-io-width = <4>;
@@ -348,7 +348,7 @@
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 6>, <&dmac 7>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart2m1_xfer>;
 		reg-io-width = <4>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
new file mode 100644
index 000000000000..fca8e87d8f52
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368-lion.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3368-uQ7 Baseboard";
+	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2cmux2 {
+		i2c@0 {
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
+
+		sd-card-led {
+			label = "sd_card_led";
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi2 {
+	cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	/* alternate function of GPIO5/6 */
+	status = "disabled";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+				/* LID_BTN */
+				<RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BATLOW# */
+				<RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* SLP_BTN# */
+				<RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BIOS_DISABLE# */
+				<RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_sd_haikou: led-sd-gpio {
+			rockchip,pins =
+				<RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_cd_gpio: sdmmc-cd-gpio {
+			rockchip,pins =
+				<RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+				<RK_GPIO0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
new file mode 100644
index 000000000000..1315972412df
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	i2cmux1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c1>;
+		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_GPO_I2C */
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* Q7_SMB */
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux2 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_LVDS_BLC_I2C */
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fan: fan@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+
+			rtc_twi: rtc@6f {
+				compatible = "isil,isl1208";
+				reg = <0x6f>;
+			};
+		};
+
+		/* Q7_GP2_I2C */
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_module>;
+
+		module_led1 {
+			label = "module_led1";
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		module_led2 {
+			label = "module_led2";
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	clock-frequency = <150000000>;
+	disable-wp;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc33_io>;
+	vqmmc-supply = <&vcc18_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc33_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_io: DCDC_REG4 {
+				regulator-name = "vcc33_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_video: LDO_REG2 {
+				regulator-name = "vcc33_video";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_pll: LDO_REG3 {
+				regulator-name = "vdd10_pll";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18_io: LDO_REG4 {
+				regulator-name = "vcc18_io";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vdd10_video: LDO_REG6 {
+				regulator-name = "vdd10_video";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18_video: LDO_REG8 {
+				regulator-name = "vcc18_video";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_pins_module: led-module-gpio {
+			rockchip,pins =
+				<RK_GPIO2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<RK_GPIO3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <RK_GPIO0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <RK_GPIO0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 204bdb9857b9..18f546f2dfd1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -516,10 +516,15 @@
 		compatible = "rockchip,rk3399-gru-sound";
 		rockchip,cpu = <&i2s0 &i2s2>;
 		rockchip,codec = <&max98357a &headsetcodec
-				  &codec &wacky_spi_audio>;
+				  &codec &wacky_spi_audio &cdn_dp>;
 	};
 };
 
+&cdn_dp {
+	status = "okay";
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
 /*
  * Set some suspend operating points to avoid OVP in suspend
  *
@@ -582,7 +587,8 @@
 		<&cru PCLK_PERIHP>,
 		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
 		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
-		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>;
 	assigned-clock-rates =
 		<600000000>, <800000000>,
 		<1000000000>,
@@ -590,7 +596,8 @@
 		<37500000>,
 		<100000000>, <100000000>,
 		<50000000>, <800000000>,
-		<100000000>, <50000000>;
+		<100000000>, <50000000>,
+		<400000000>;
 };
 
 &emmc_phy {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 9a7486058455..7d3e8bfd51dd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -61,6 +61,30 @@
 		};
 	};
 
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;
+	};
+
 	dc_12v: dc-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
@@ -80,6 +104,16 @@
 		vin-supply = <&dc_12v>;
 	};
 
+	vcc5v0_baseboard: vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
 	vcc5v0_otg: vcc5v0-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -89,6 +123,24 @@
 		regulator-name = "vcc5v0_otg";
 		regulator-always-on;
 	};
+
+	vdda_codec: vdda-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
 };
 
 &i2c1 {
@@ -110,6 +162,17 @@
 &i2c4 {
 	status = "okay";
 	clock-frequency = <400000>;
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vdda_codec>;
+		VDDD-supply = <&vddd_codec>;
+		status = "okay";
+	};
 };
 
 &i2c6 {
@@ -117,14 +180,6 @@
 	clock-frequency = <400000>;
 };
 
-&i2s0 {
-	status = "okay";
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
 &pcie_phy {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 1fc5060d7027..4a2d06abe9c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -435,6 +435,28 @@
 	};
 };
 
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+/*
+ * As Q7 does not specify neither a global nor a RX clock for I2S these
+ * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
+ * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
+ * conflicts.
+ */
+&i2s0_2ch_bus {
+	rockchip,pins =
+		<RK_GPIO3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>,
+		<RK_GPIO3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>,
+		<RK_GPIO3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>,
+		<RK_GPIO3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -505,6 +527,12 @@
 	};
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b7bd88fb3ae3..56952d1a3fb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -41,7 +41,6 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/input/input.h>
 #include "rk3399-sapphire.dtsi"
 
 / {
@@ -95,22 +94,6 @@
 		};
 	};
 
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <KEY_POWER>;
-			linux,input-type = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_btn>;
-			wakeup-source;
-		};
-	};
-
 	rt5651-sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "realtek,rt5651-codec";
@@ -207,18 +190,7 @@
 	status = "okay";
 };
 
-&i2s2 {
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
 &pinctrl {
-	buttons {
-		pwr_btn: pwr-btn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -232,6 +204,22 @@
 	};
 };
 
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &spdif {
 	i2c-scl-rising-time-ns = <450>;
 	i2c-scl-falling-time-ns = <15>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
new file mode 100644
index 000000000000..5a58060447cf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Sapphire-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index ce592a4c0c4c..e5daed7d2026 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 
@@ -102,6 +103,22 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -143,6 +160,17 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc_sys>;
+	};
 };
 
 &cpu_l0 {
@@ -421,17 +449,6 @@
 			regulator-off-in-suspend;
 		};
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sys>;
-	};
 };
 
 &i2c3 {
@@ -440,6 +457,11 @@
 	status = "okay";
 };
 
+&i2s2 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 
@@ -470,6 +492,12 @@
 };
 
 &pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins =
@@ -513,29 +541,12 @@
 
 &sdhci {
 	bus-width = <8>;
-	keep-power-in-suspend;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
 
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	clock-frequency = <50000000>;
-	disable-wp;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 0b81ca1d07e7..4550c0f82be9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -457,6 +457,42 @@
 		};
 	};
 
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_DP_CORE>;
+		assigned-clock-rates = <100000000>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+			 <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+		reset-names = "spdif", "dptx", "apb", "core";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <1>;
+		status = "disabled";
+
+		ports {
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller@fee00000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <4>;
@@ -1286,7 +1322,8 @@
 			<&cru PCLK_PERIHP>,
 			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
 			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
-			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+			<&cru ACLK_VIO>;
 		assigned-clock-rates =
 			 <594000000>,  <800000000>,
 			<1000000000>,
@@ -1294,7 +1331,8 @@
 			  <37500000>,
 			 <100000000>,  <100000000>,
 			  <50000000>, <600000000>,
-			 <100000000>,   <50000000>;
+			 <100000000>,   <50000000>,
+			 <400000000>;
 	};
 
 	grf: syscon@ff770000 {
@@ -1547,6 +1585,11 @@
 				reg = <3>;
 				remote-endpoint = <&mipi1_in_vopl>;
 			};
+
+			vopl_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopl>;
+			};
 		};
 	};
 
@@ -1599,6 +1642,11 @@
 				reg = <3>;
 				remote-endpoint = <&mipi1_in_vopb>;
 			};
+
+			vopb_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopb>;
+			};
 		};
 	};
 
@@ -2043,6 +2091,16 @@
 		};
 
 		i2s0 {
+			i2s0_2ch_bus: i2s0-2ch-bus {
+				rockchip,pins =
+					<3 24 RK_FUNC_1 &pcfg_pull_none>,
+					<3 25 RK_FUNC_1 &pcfg_pull_none>,
+					<3 26 RK_FUNC_1 &pcfg_pull_none>,
+					<3 27 RK_FUNC_1 &pcfg_pull_none>,
+					<3 31 RK_FUNC_1 &pcfg_pull_none>,
+					<4 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
 			i2s0_8ch_bus: i2s0-8ch-bus {
 				rockchip,pins =
 					<3 24 RK_FUNC_1 &pcfg_pull_none>,
@@ -2293,6 +2351,23 @@
 			};
 		};
 
+		testclk {
+			test_clkout0: test-clkout0 {
+				rockchip,pins =
+					<0 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			test_clkout1: test-clkout1 {
+				rockchip,pins =
+					<2 25 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			test_clkout2: test-clkout2 {
+				rockchip,pins =
+					<0 8 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
 		tsadc {
 			otp_gpio: otp-gpio {
 				rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>;