diff options
author | Linus Torvalds | 2005-04-17 00:20:36 +0200 |
---|---|---|
committer | Linus Torvalds | 2005-04-17 00:20:36 +0200 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/prep_pci.c | |
download | kernel-qcow2-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel-qcow2-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz kernel-qcow2-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/ppc/platforms/prep_pci.c')
-rw-r--r-- | arch/ppc/platforms/prep_pci.c | 1336 |
1 files changed, 1336 insertions, 0 deletions
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c new file mode 100644 index 000000000000..8cd80eb447bd --- /dev/null +++ b/arch/ppc/platforms/prep_pci.c @@ -0,0 +1,1336 @@ +/* + * PReP pci functions. + * Originally by Gary Thomas + * rewritten and updated by Cort Dougan (cort@cs.nmt.edu) + * + * The motherboard routes/maps will disappear shortly. -- Cort + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/sections.h> +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/ptrace.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/residual.h> +#include <asm/irq.h> +#include <asm/machdep.h> +#include <asm/open_pic.h> + +extern void (*setup_ibm_pci)(char *irq_lo, char *irq_hi); + +/* Which PCI interrupt line does a given device [slot] use? */ +/* Note: This really should be two dimensional based in slot/pin used */ +static unsigned char *Motherboard_map; +unsigned char *Motherboard_map_name; + +/* How is the 82378 PIRQ mapping setup? */ +static unsigned char *Motherboard_routes; + +static void (*Motherboard_non0)(struct pci_dev *); + +static void Powerplus_Map_Non0(struct pci_dev *); + +/* Used for Motorola to store system config register */ +static unsigned long *ProcInfo; + +/* Tables for known hardware */ + +/* Motorola PowerStackII - Utah */ +static char Utah_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 5, /* Slot 2 - SCSI - NCR825A */ + 0, /* Slot 3 - unused */ + 3, /* Slot 4 - Ethernet - DEC2114x */ + 0, /* Slot 5 - unused */ + 2, /* Slot 6 - PCI Card slot #1 */ + 3, /* Slot 7 - PCI Card slot #2 */ + 5, /* Slot 8 - PCI Card slot #3 */ + 5, /* Slot 9 - PCI Bridge */ + /* added here in case we ever support PCI bridges */ + /* Secondary PCI bus cards are at slot-9,6 & slot-9,7 */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 5, /* Slot 12 - SCSI - NCR825A */ + 0, /* Slot 13 - unused */ + 3, /* Slot 14 - enet */ + 0, /* Slot 15 - unused */ + 2, /* Slot 16 - unused */ + 3, /* Slot 17 - unused */ + 5, /* Slot 18 - unused */ + 0, /* Slot 19 - unused */ + 0, /* Slot 20 - unused */ + 0, /* Slot 21 - unused */ + 0, /* Slot 22 - unused */ +}; + +static char Utah_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 9, /* Line 1 */ + 10, /* Line 2 */ + 11, /* Line 3 */ + 14, /* Line 4 */ + 15, /* Line 5 */ +}; + +/* Motorola PowerStackII - Omaha */ +/* no integrated SCSI or ethernet */ +static char Omaha_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 3, /* Slot 2 - Winbond EIDE */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 1, /* Slot 6 - PCI slot 1 */ + 2, /* Slot 7 - PCI slot 2 */ + 3, /* Slot 8 - PCI slot 3 */ + 4, /* Slot 9 - PCI slot 4 */ /* needs indirect access */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 0, /* Slot 12 - unused */ + 0, /* Slot 13 - unused */ + 0, /* Slot 14 - unused */ + 0, /* Slot 15 - unused */ + 1, /* Slot 16 - PCI slot 1 */ + 2, /* Slot 17 - PCI slot 2 */ + 3, /* Slot 18 - PCI slot 3 */ + 4, /* Slot 19 - PCI slot 4 */ /* needs indirect access */ + 0, + 0, + 0, +}; + +static char Omaha_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 9, /* Line 1 */ + 11, /* Line 2 */ + 14, /* Line 3 */ + 15 /* Line 4 */ +}; + +/* Motorola PowerStack */ +static char Blackhawk_pci_IRQ_map[19] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 1, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 1, /* Slot P7 */ + 2, /* Slot P6 */ + 3, /* Slot P5 */ +}; + +static char Blackhawk_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 9, /* Line 1 */ + 11, /* Line 2 */ + 15, /* Line 3 */ + 15 /* Line 4 */ +}; + +/* Motorola Mesquite */ +static char Mesquite_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 0, /* Slot 12 - unused */ + 0, /* Slot 13 - unused */ + 2, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 3, /* Slot 16 - PMC */ + 0, /* Slot 17 - unused */ + 0, /* Slot 18 - unused */ + 0, /* Slot 19 - unused */ + 0, /* Slot 20 - unused */ + 0, /* Slot 21 - unused */ + 0, /* Slot 22 - unused */ +}; + +/* Motorola Sitka */ +static char Sitka_pci_IRQ_map[21] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 0, /* Slot 12 - unused */ + 0, /* Slot 13 - unused */ + 2, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 9, /* Slot 16 - PMC 1 */ + 12, /* Slot 17 - PMC 2 */ + 0, /* Slot 18 - unused */ + 0, /* Slot 19 - unused */ + 4, /* Slot 20 - NT P2P bridge */ +}; + +/* Motorola MTX */ +static char MTX_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 2, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 9, /* Slot 16 - PCI/PMC slot 1 */ + 10, /* Slot 17 - PCI/PMC slot 2 */ + 11, /* Slot 18 - PCI slot 3 */ + 0, /* Slot 19 - unused */ + 0, /* Slot 20 - unused */ + 0, /* Slot 21 - unused */ + 0, /* Slot 22 - unused */ +}; + +/* Motorola MTX Plus */ +/* Secondary bus interrupt routing is not supported yet */ +static char MTXplus_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 2, /* Slot 14 - Ethernet 1 */ + 0, /* Slot 15 - unused */ + 9, /* Slot 16 - PCI slot 1P */ + 10, /* Slot 17 - PCI slot 2P */ + 11, /* Slot 18 - PCI slot 3P */ + 10, /* Slot 19 - Ethernet 2 */ + 0, /* Slot 20 - P2P Bridge */ + 0, /* Slot 21 - unused */ + 0, /* Slot 22 - unused */ +}; + +static char Raven_pci_IRQ_routes[] __prepdata = +{ + 0, /* This is a dummy structure */ +}; + +/* Motorola MVME16xx */ +static char Genesis_pci_IRQ_map[16] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 1, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ +}; + +static char Genesis_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 10, /* Line 1 */ + 11, /* Line 2 */ + 14, /* Line 3 */ + 15 /* Line 4 */ +}; + +static char Genesis2_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - IDE */ + 3, /* Slot 12 - SCSI */ + 5, /* Slot 13 - Universe PCI - VME Bridge */ + 2, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 9, /* Slot 16 - PMC 1 */ + 12, /* Slot 17 - pci */ + 11, /* Slot 18 - pci */ + 10, /* Slot 19 - pci */ + 0, /* Slot 20 - pci */ + 0, /* Slot 21 - unused */ + 0, /* Slot 22 - unused */ +}; + +/* Motorola Series-E */ +static char Comet_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 1, /* Slot 14 - Ethernet */ + 0, /* Slot 15 - unused */ + 1, /* Slot 16 - PCI slot 1 */ + 2, /* Slot 17 - PCI slot 2 */ + 3, /* Slot 18 - PCI slot 3 */ + 4, /* Slot 19 - PCI bridge */ + 0, + 0, + 0, +}; + +static char Comet_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 10, /* Line 1 */ + 11, /* Line 2 */ + 14, /* Line 3 */ + 15 /* Line 4 */ +}; + +/* Motorola Series-EX */ +static char Comet2_pci_IRQ_map[23] __prepdata = +{ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 3, /* Slot 2 - SCSI - NCR825A */ + 0, /* Slot 3 - unused */ + 1, /* Slot 4 - Ethernet - DEC2104X */ + 0, /* Slot 5 - unused */ + 1, /* Slot 6 - PCI slot 1 */ + 2, /* Slot 7 - PCI slot 2 */ + 3, /* Slot 8 - PCI slot 3 */ + 4, /* Slot 9 - PCI bridge */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI - NCR825A */ + 0, /* Slot 13 - unused */ + 1, /* Slot 14 - Ethernet - DEC2104X */ + 0, /* Slot 15 - unused */ + 1, /* Slot 16 - PCI slot 1 */ + 2, /* Slot 17 - PCI slot 2 */ + 3, /* Slot 18 - PCI slot 3 */ + 4, /* Slot 19 - PCI bridge */ + 0, + 0, + 0, +}; + +static char Comet2_pci_IRQ_routes[] __prepdata = +{ + 0, /* Line 0 - Unused */ + 10, /* Line 1 */ + 11, /* Line 2 */ + 14, /* Line 3 */ + 15, /* Line 4 */ +}; + +/* + * ibm 830 (and 850?). + * This is actually based on the Carolina motherboard + * -- Cort + */ +static char ibm8xx_pci_IRQ_map[23] __prepdata = { + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - FireCoral */ + 4, /* Slot 12 - Ethernet PCIINTD# */ + 2, /* Slot 13 - PCI Slot #2 */ + 2, /* Slot 14 - S3 Video PCIINTD# */ + 0, /* Slot 15 - onboard SCSI (INDI) [1] */ + 3, /* Slot 16 - NCR58C810 RS6000 Only PCIINTC# */ + 0, /* Slot 17 - unused */ + 2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */ + 0, /* Slot 19 - unused */ + 0, /* Slot 20 - unused */ + 0, /* Slot 21 - unused */ + 2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */ +}; + +static char ibm8xx_pci_IRQ_routes[] __prepdata = { + 0, /* Line 0 - unused */ + 15, /* Line 1 */ + 15, /* Line 2 */ + 15, /* Line 3 */ + 15, /* Line 4 */ +}; + +/* + * a 6015 ibm board + * -- Cort + */ +static char ibm6015_pci_IRQ_map[23] __prepdata = { + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - */ + 1, /* Slot 12 - SCSI */ + 2, /* Slot 13 - */ + 2, /* Slot 14 - */ + 1, /* Slot 15 - */ + 1, /* Slot 16 - */ + 0, /* Slot 17 - */ + 2, /* Slot 18 - */ + 0, /* Slot 19 - */ + 0, /* Slot 20 - */ + 0, /* Slot 21 - */ + 2, /* Slot 22 - */ +}; + +static char ibm6015_pci_IRQ_routes[] __prepdata = { + 0, /* Line 0 - unused */ + 13, /* Line 1 */ + 15, /* Line 2 */ + 15, /* Line 3 */ + 15, /* Line 4 */ +}; + + +/* IBM Nobis and Thinkpad 850 */ +static char Nobis_pci_IRQ_map[23] __prepdata ={ + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - unused */ + 3, /* Slot 12 - SCSI */ + 0, /* Slot 13 - unused */ + 0, /* Slot 14 - unused */ + 0, /* Slot 15 - unused */ +}; + +static char Nobis_pci_IRQ_routes[] __prepdata = { + 0, /* Line 0 - Unused */ + 13, /* Line 1 */ + 13, /* Line 2 */ + 13, /* Line 3 */ + 13 /* Line 4 */ +}; + +/* + * IBM RS/6000 43p/140 -- paulus + * XXX we should get all this from the residual data + */ +static char ibm43p_pci_IRQ_map[23] __prepdata = { + 0, /* Slot 0 - unused */ + 0, /* Slot 1 - unused */ + 0, /* Slot 2 - unused */ + 0, /* Slot 3 - unused */ + 0, /* Slot 4 - unused */ + 0, /* Slot 5 - unused */ + 0, /* Slot 6 - unused */ + 0, /* Slot 7 - unused */ + 0, /* Slot 8 - unused */ + 0, /* Slot 9 - unused */ + 0, /* Slot 10 - unused */ + 0, /* Slot 11 - FireCoral ISA bridge */ + 6, /* Slot 12 - Ethernet */ + 0, /* Slot 13 - openpic */ + 0, /* Slot 14 - unused */ + 0, /* Slot 15 - unused */ + 7, /* Slot 16 - NCR58C825a onboard scsi */ + 0, /* Slot 17 - unused */ + 2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */ + 0, /* Slot 19 - unused */ + 0, /* Slot 20 - unused */ + 0, /* Slot 21 - unused */ + 1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */ +}; + +static char ibm43p_pci_IRQ_routes[] __prepdata = { + 0, /* Line 0 - unused */ + 15, /* Line 1 */ + 15, /* Line 2 */ + 15, /* Line 3 */ + 15, /* Line 4 */ +}; + +/* Motorola PowerPlus architecture PCI IRQ tables */ +/* Interrupt line values for INTA-D on primary/secondary MPIC inputs */ + +struct powerplus_irq_list +{ + unsigned char primary[4]; /* INT A-D */ + unsigned char secondary[4]; /* INT A-D */ +}; + +/* + * For standard PowerPlus boards, bus 0 PCI INTs A-D are routed to + * OpenPIC inputs 9-12. PCI INTs A-D from the on board P2P bridge + * are routed to OpenPIC inputs 5-8. These values are offset by + * 16 in the table to reflect the Linux kernel interrupt value. + */ +struct powerplus_irq_list Powerplus_pci_IRQ_list __prepdata = +{ + {25, 26, 27, 28}, + {21, 22, 23, 24} +}; + +/* + * For the MCP750 (system slot board), cPCI INTs A-D are routed to + * OpenPIC inputs 8-11 and the PMC INTs A-D are routed to OpenPIC + * input 3. On a hot swap MCP750, the companion card PCI INTs A-D + * are routed to OpenPIC inputs 12-15. These values are offset by + * 16 in the table to reflect the Linux kernel interrupt value. + */ +struct powerplus_irq_list Mesquite_pci_IRQ_list __prepdata = +{ + {24, 25, 26, 27}, + {28, 29, 30, 31} +}; + +/* + * This table represents the standard PCI swizzle defined in the + * PCI bus specification. + */ +static unsigned char prep_pci_intpins[4][4] __prepdata = +{ + { 1, 2, 3, 4}, /* Buses 0, 4, 8, ... */ + { 2, 3, 4, 1}, /* Buses 1, 5, 9, ... */ + { 3, 4, 1, 2}, /* Buses 2, 6, 10 ... */ + { 4, 1, 2, 3}, /* Buses 3, 7, 11 ... */ +}; + +/* We have to turn on LEVEL mode for changed IRQ's */ +/* All PCI IRQ's need to be level mode, so this should be something + * other than hard-coded as well... IRQ's are individually mappable + * to either edge or level. + */ + +/* + * 8259 edge/level control definitions + */ +#define ISA8259_M_ELCR 0x4d0 +#define ISA8259_S_ELCR 0x4d1 + +#define ELCRS_INT15_LVL 0x80 +#define ELCRS_INT14_LVL 0x40 +#define ELCRS_INT12_LVL 0x10 +#define ELCRS_INT11_LVL 0x08 +#define ELCRS_INT10_LVL 0x04 +#define ELCRS_INT9_LVL 0x02 +#define ELCRS_INT8_LVL 0x01 +#define ELCRM_INT7_LVL 0x80 +#define ELCRM_INT5_LVL 0x20 + +#if 0 +/* + * PCI config space access. + */ +#define CFGADDR(dev) ((1<<(dev>>3)) | ((dev&7)<<8)) +#define DEVNO(dev) (dev>>3) + +#define MIN_DEVNR 11 +#define MAX_DEVNR 22 + +static int __prep +prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + + if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR + || DEVNO(devfn) > MAX_DEVNR) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + CFGADDR(devfn) + offset; + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int __prep +prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + + if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR + || DEVNO(devfn) > MAX_DEVNR) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + CFGADDR(devfn) + offset; + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops prep_pci_ops = +{ + prep_read_config, + prep_write_config +}; +#endif + +#define MOTOROLA_CPUTYPE_REG 0x800 +#define MOTOROLA_BASETYPE_REG 0x803 +#define MPIC_RAVEN_ID 0x48010000 +#define MPIC_HAWK_ID 0x48030000 +#define MOT_PROC2_BIT 0x800 + +static u_char prep_openpic_initsenses[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_FALCN_ECC_ERR */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_ETHERNET */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_GRAPHICS */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */ +}; + +#define MOT_RAVEN_PRESENT 0x1 +#define MOT_HAWK_PRESENT 0x2 + +int mot_entry = -1; +int prep_keybd_present = 1; +int MotMPIC; +int mot_multi; + +int __init +raven_init(void) +{ + unsigned int devid; + unsigned int pci_membase; + unsigned char base_mod; + + /* Check to see if the Raven chip exists. */ + if ( _prep_type != _PREP_Motorola) { + OpenPIC_Addr = NULL; + return 0; + } + + /* Check to see if this board is a type that might have a Raven. */ + if ((inb(MOTOROLA_CPUTYPE_REG) & 0xF0) != 0xE0) { + OpenPIC_Addr = NULL; + return 0; + } + + /* Check the first PCI device to see if it is a Raven. */ + early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &devid); + + switch (devid & 0xffff0000) { + case MPIC_RAVEN_ID: + MotMPIC = MOT_RAVEN_PRESENT; + break; + case MPIC_HAWK_ID: + MotMPIC = MOT_HAWK_PRESENT; + break; + default: + OpenPIC_Addr = NULL; + return 0; + } + + + /* Read the memory base register. */ + early_read_config_dword(NULL, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + OpenPIC_Addr = NULL; + return 0; + } + + /* Map the Raven MPIC registers to virtual memory. */ + OpenPIC_Addr = ioremap(pci_membase+0xC0000000, 0x22000); + + OpenPIC_InitSenses = prep_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses); + + ppc_md.get_irq = openpic_get_irq; + + /* If raven is present on Motorola store the system config register + * for later use. + */ + ProcInfo = (unsigned long *)ioremap(0xfef80400, 4); + + /* Indicate to system if this is a multiprocessor board */ + if (!(*ProcInfo & MOT_PROC2_BIT)) { + mot_multi = 1; + } + + /* This is a hack. If this is a 2300 or 2400 mot board then there is + * no keyboard controller and we have to indicate that. + */ + base_mod = inb(MOTOROLA_BASETYPE_REG); + if ((MotMPIC == MOT_HAWK_PRESENT) || (base_mod == 0xF9) || + (base_mod == 0xFA) || (base_mod == 0xE1)) + prep_keybd_present = 0; + + return 1; +} + +struct mot_info { + int cpu_type; /* 0x100 mask assumes for Raven and Hawk boards that the level/edge are set */ + /* 0x200 if this board has a Hawk chip. */ + int base_type; + int max_cpu; /* ored with 0x80 if this board should be checked for multi CPU */ + const char *name; + unsigned char *map; + unsigned char *routes; + void (*map_non0_bus)(struct pci_dev *); /* For boards with more than bus 0 devices. */ + struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */ + unsigned char secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */ +} mot_info[] __prepdata = { + {0x300, 0x00, 0x00, "MVME 2400", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x010, 0x00, 0x00, "Genesis", Genesis_pci_IRQ_map, Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x020, 0x00, 0x00, "Powerstack (Series E)", Comet_pci_IRQ_map, Comet_pci_IRQ_routes, NULL, NULL, 0x00}, + {0x040, 0x00, 0x00, "Blackhawk (Powerstack)", Blackhawk_pci_IRQ_map, Blackhawk_pci_IRQ_routes, NULL, NULL, 0x00}, + {0x050, 0x00, 0x00, "Omaha (PowerStack II Pro3000)", Omaha_pci_IRQ_map, Omaha_pci_IRQ_routes, NULL, NULL, 0x00}, + {0x060, 0x00, 0x00, "Utah (Powerstack II Pro4000)", Utah_pci_IRQ_map, Utah_pci_IRQ_routes, NULL, NULL, 0x00}, + {0x0A0, 0x00, 0x00, "Powerstack (Series EX)", Comet2_pci_IRQ_map, Comet2_pci_IRQ_routes, NULL, NULL, 0x00}, + {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", Mesquite_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xFF}, + {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", Sitka_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", Mesquite_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xC0}, + {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0}, + {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0}, + {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00}, + {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x1E0, 0xFF, 0x00, "MVME 1600-001 or 1600-011", Genesis2_pci_IRQ_map, Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF}, + {0x000, 0x00, 0x00, "", NULL, NULL, NULL, NULL, 0x00} +}; + +void __init +ibm_prep_init(void) +{ + if (have_residual_data) { + u32 addr, real_addr, len, offset; + PPC_DEVICE *mpic; + PnP_TAG_PACKET *pkt; + + /* Use the PReP residual data to determine if an OpenPIC is + * present. If so, get the large vendor packet which will + * tell us the base address and length in memory. + * If we are successful, ioremap the memory area and set + * OpenPIC_Addr (this indicates that the OpenPIC was found). + */ + mpic = residual_find_device(-1, NULL, SystemPeripheral, + ProgrammableInterruptController, MPIC, 0); + if (!mpic) + return; + + pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap + + mpic->AllocatedOffset, 9, 0); + + if (!pkt) + return; + +#define p pkt->L4_Pack.L4_Data.L4_PPCPack + if (p.PPCData[1] == 32) { + switch (p.PPCData[0]) { + case 1: offset = PREP_ISA_IO_BASE; break; + case 2: offset = PREP_ISA_MEM_BASE; break; + default: return; /* Not I/O or memory?? */ + } + } + else + return; /* Not a 32-bit address */ + + real_addr = ld_le32((unsigned int *) (p.PPCData + 4)); + if (real_addr == 0xffffffff) + return; + + /* Adjust address to be as seen by CPU */ + addr = real_addr + offset; + + len = ld_le32((unsigned int *) (p.PPCData + 12)); + if (!len) + return; +#undef p + OpenPIC_Addr = ioremap(addr, len); + ppc_md.get_irq = openpic_get_irq; + + OpenPIC_InitSenses = prep_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses); + + printk(KERN_INFO "MPIC at 0x%08x (0x%08x), length 0x%08x " + "mapped to 0x%p\n", addr, real_addr, len, OpenPIC_Addr); + } +} + +static void __init +ibm43p_pci_map_non0(struct pci_dev *dev) +{ + unsigned char intpin; + static unsigned char bridge_intrs[4] = { 3, 4, 5, 8 }; + + if (dev == NULL) + return; + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin); + if (intpin < 1 || intpin > 4) + return; + intpin = (PCI_SLOT(dev->devfn) + intpin - 1) & 3; + dev->irq = openpic_to_irq(bridge_intrs[intpin]); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); +} + +void __init +prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) +{ + if (have_residual_data) { + Motherboard_map_name = res->VitalProductData.PrintableModel; + Motherboard_map = NULL; + Motherboard_routes = NULL; + residual_irq_mask(irq_edge_mask_lo, irq_edge_mask_hi); + } +} + +void __init +prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) +{ + Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)"; + Motherboard_map = ibm6015_pci_IRQ_map; + Motherboard_routes = ibm6015_pci_IRQ_routes; + *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ +} + +void __init +prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) +{ + Motherboard_map_name = "IBM Thinkpad 850/860"; + Motherboard_map = Nobis_pci_IRQ_map; + Motherboard_routes = Nobis_pci_IRQ_routes; + *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ +} + +void __init +prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) +{ + Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)"; + Motherboard_map = ibm8xx_pci_IRQ_map; + Motherboard_routes = ibm8xx_pci_IRQ_routes; + *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA4; /* irq's 10, 13, 15 level-triggered */ +} + +void __init +prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) +{ + Motherboard_map_name = "IBM 43P-140 (Tiger1)"; + Motherboard_map = ibm43p_pci_IRQ_map; + Motherboard_routes = ibm43p_pci_IRQ_routes; + Motherboard_non0 = ibm43p_pci_map_non0; + *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ +} + +void __init +prep_route_pci_interrupts(void) +{ + unsigned char *ibc_pirq = (unsigned char *)0x80800860; + unsigned char *ibc_pcicon = (unsigned char *)0x80800840; + int i; + + if ( _prep_type == _PREP_Motorola) + { + unsigned short irq_mode; + unsigned char cpu_type; + unsigned char base_mod; + int entry; + + cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0; + base_mod = inb(MOTOROLA_BASETYPE_REG); + + for (entry = 0; mot_info[entry].cpu_type != 0; entry++) { + if (mot_info[entry].cpu_type & 0x200) { /* Check for Hawk chip */ + if (!(MotMPIC & MOT_HAWK_PRESENT)) + continue; + } else { /* Check non hawk boards */ + if ((mot_info[entry].cpu_type & 0xff) != cpu_type) + continue; + + if (mot_info[entry].base_type == 0) { + mot_entry = entry; + break; + } + + if (mot_info[entry].base_type != base_mod) + continue; + } + + if (!(mot_info[entry].max_cpu & 0x80)) { + mot_entry = entry; + break; + } + + /* processor 1 not present and max processor zero indicated */ + if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) { + mot_entry = entry; + break; + } + + /* processor 1 present and max processor zero indicated */ + if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) { + mot_entry = entry; + break; + } + } + + if (mot_entry == -1) /* No particular cpu type found - assume Blackhawk */ + mot_entry = 3; + + Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name; + Motherboard_map = mot_info[mot_entry].map; + Motherboard_routes = mot_info[mot_entry].routes; + Motherboard_non0 = mot_info[mot_entry].map_non0_bus; + + if (!(mot_info[entry].cpu_type & 0x100)) { + /* AJF adjust level/edge control according to routes */ + irq_mode = 0; + for (i = 1; i <= 4; i++) + irq_mode |= ( 1 << Motherboard_routes[i] ); + outb( irq_mode & 0xff, 0x4d0 ); + outb( (irq_mode >> 8) & 0xff, 0x4d1 ); + } + } else if ( _prep_type == _PREP_IBM ) { + unsigned char irq_edge_mask_lo, irq_edge_mask_hi; + unsigned short irq_edge_mask; + int i; + + setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi); + + outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */ + outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */ + + irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo; + for (i = 0; i < 16; ++i, irq_edge_mask >>= 1) + if (irq_edge_mask & 1) + irq_desc[i].status |= IRQ_LEVEL; + } else { + printk("No known machine pci routing!\n"); + return; + } + + /* Set up mapping from slots */ + if (Motherboard_routes) { + for (i = 1; i <= 4; i++) + ibc_pirq[i-1] = Motherboard_routes[i]; + + /* Enable PCI interrupts */ + *ibc_pcicon |= 0x20; + } +} + +void __init +prep_pib_init(void) +{ + unsigned char reg; + unsigned short short_reg; + + struct pci_dev *dev = NULL; + + if (( _prep_type == _PREP_Motorola) && (OpenPIC_Addr)) { + /* + * Perform specific configuration for the Via Tech or + * or Winbond PCI-ISA-Bridge part. + */ + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, dev))) { + /* + * PPCBUG does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, ®); + + reg |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, reg); + } + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, + dev)) && (dev->devfn = 0x5a)) { + /* Force correct USB interrupt */ + dev->irq = 11; + pci_write_config_byte(dev, + PCI_INTERRUPT_LINE, + dev->irq); + } + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, + PCI_DEVICE_ID_WINBOND_83C553, dev))) { + /* Clear PCI Interrupt Routing Control Register. */ + short_reg = 0x0000; + pci_write_config_word(dev, 0x44, short_reg); + if (OpenPIC_Addr){ + /* Route IDE interrupts to IRQ 14 */ + reg = 0xEE; + pci_write_config_byte(dev, 0x43, reg); + } + } + pci_dev_put(dev); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, + PCI_DEVICE_ID_WINBOND_82C105, dev))){ + if (OpenPIC_Addr){ + /* + * Disable LEGIRQ mode so PCI INTS are routed + * directly to the 8259 and enable both channels + */ + pci_write_config_dword(dev, 0x40, 0x10ff0033); + + /* Force correct IDE interrupt */ + dev->irq = 14; + pci_write_config_byte(dev, + PCI_INTERRUPT_LINE, + dev->irq); + } else { + /* Enable LEGIRQ for PCI INT -> 8259 IRQ routing */ + pci_write_config_dword(dev, 0x40, 0x10ff08a1); + } + } + pci_dev_put(dev); +} + +static void __init +Powerplus_Map_Non0(struct pci_dev *dev) +{ + struct pci_bus *pbus; /* Parent bus structure pointer */ + struct pci_dev *tdev = dev; /* Temporary device structure */ + unsigned int devnum; /* Accumulated device number */ + unsigned char intline; /* Linux interrupt value */ + unsigned char intpin; /* PCI interrupt pin */ + + /* Check for valid PCI dev pointer */ + if (dev == NULL) return; + + /* Initialize bridge IDSEL variable */ + devnum = PCI_SLOT(tdev->devfn); + + /* Read the interrupt pin of the device and adjust for indexing */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin); + + /* If device doesn't request an interrupt, return */ + if ( (intpin < 1) || (intpin > 4) ) + return; + + intpin--; + + /* + * Walk up to bus 0, adjusting the interrupt pin for the standard + * PCI bus swizzle. + */ + do { + intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1; + pbus = tdev->bus; /* up one level */ + tdev = pbus->self; + devnum = PCI_SLOT(tdev->devfn); + } while(tdev->bus->number); + + /* Use the primary interrupt inputs by default */ + intline = mot_info[mot_entry].pci_irq_list->primary[intpin]; + + /* + * If the board has secondary interrupt inputs, walk the bus and + * note the devfn of the bridge from bus 0. If it is the same as + * the devfn of the bus bridge with secondary inputs, use those. + * Otherwise, assume it's a PMC site and get the interrupt line + * value from the interrupt routing table. + */ + if (mot_info[mot_entry].secondary_bridge_devfn) { + pbus = dev->bus; + + while (pbus->primary != 0) + pbus = pbus->parent; + + if ((pbus->self)->devfn != 0xA0) { + if ((pbus->self)->devfn == mot_info[mot_entry].secondary_bridge_devfn) + intline = mot_info[mot_entry].pci_irq_list->secondary[intpin]; + else { + if ((char *)(mot_info[mot_entry].map) == (char *)Mesquite_pci_IRQ_map) + intline = mot_info[mot_entry].map[((pbus->self)->devfn)/8] + 16; + else { + int i; + for (i=0;i<3;i++) + intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1; + intline = mot_info[mot_entry].pci_irq_list->primary[intpin]; + } + } + } + } + + /* Write calculated interrupt value to header and device list */ + dev->irq = intline; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, (u8)dev->irq); +} + +void __init +prep_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + int irq; + int have_openpic = (OpenPIC_Addr != NULL); + + prep_route_pci_interrupts(); + + printk("Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name); + + /* Iterate through all the PCI devices, setting the IRQ */ + for_each_pci_dev(dev) { + /* + * If we have residual data, then this is easy: query the + * residual data for the IRQ line allocated to the device. + * This works the same whether we have an OpenPic or not. + */ + if (have_residual_data) { + irq = residual_pcidev_irq(dev); + dev->irq = have_openpic ? openpic_to_irq(irq) : irq; + } + /* + * If we don't have residual data, then we need to use + * tables to determine the IRQ. The table organisation + * is different depending on whether there is an OpenPIC + * or not. The tables are only used for bus 0, so check + * this first. + */ + else if (dev->bus->number == 0) { + irq = Motherboard_map[PCI_SLOT(dev->devfn)]; + dev->irq = have_openpic ? openpic_to_irq(irq) + : Motherboard_routes[irq]; + } + /* + * Finally, if we don't have residual data and the bus is + * non-zero, use the callback (if provided) + */ + else { + if (Motherboard_non0 != NULL) + Motherboard_non0(dev); + + continue; + } + + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* Setup the Winbond or Via PIB */ + prep_pib_init(); +} + +static void __init +prep_pcibios_after_init(void) +{ +#if 0 + struct pci_dev *dev; + + /* If there is a WD 90C, reset the IO BAR to 0x0 (it started that + * way, but the PCI layer relocated it because it thought 0x0 was + * invalid for a BAR). + * If you don't do this, the card's VGA base will be <IO BAR>+0xc0000 + * instead of 0xc0000. vgacon.c (for example) is completely unaware of + * this little quirk. + */ + dev = pci_get_device(PCI_VENDOR_ID_WD, PCI_DEVICE_ID_WD_90C, NULL); + if (dev) { + dev->resource[1].end -= dev->resource[1].start; + dev->resource[1].start = 0; + /* tell the hardware */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0x0); + pci_dev_put(dev); + } +#endif +} + +static void __init +prep_init_resource(struct resource *res, unsigned long start, + unsigned long end, int flags) +{ + res->flags = flags; + res->start = start; + res->end = end; + res->name = "PCI host bridge"; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; +} + +void __init +prep_find_bridges(void) +{ + struct pci_controller* hose; + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + hose->pci_mem_offset = PREP_ISA_MEM_BASE; + hose->io_base_phys = PREP_ISA_IO_BASE; + hose->io_base_virt = ioremap(PREP_ISA_IO_BASE, 0x800000); + prep_init_resource(&hose->io_resource, 0, 0x007fffff, IORESOURCE_IO); + prep_init_resource(&hose->mem_resources[0], 0xc0000000, 0xfeffffff, + IORESOURCE_MEM); + setup_indirect_pci(hose, PREP_ISA_IO_BASE + 0xcf8, + PREP_ISA_IO_BASE + 0xcfc); + + printk("PReP architecture\n"); + + if (have_residual_data) { + PPC_DEVICE *hostbridge; + + hostbridge = residual_find_device(PROCESSORDEVICE, NULL, + BridgeController, PCIBridge, -1, 0); + if (hostbridge && + ((hostbridge->DeviceId.Interface == PCIBridgeIndirect) || + (hostbridge->DeviceId.Interface == PCIBridgeRS6K))) { + PnP_TAG_PACKET * pkt; + pkt = PnP_find_large_vendor_packet( + res->DevicePnPHeap+hostbridge->AllocatedOffset, + 3, 0); + if(pkt) { +#define p pkt->L4_Pack.L4_Data.L4_PPCPack + setup_indirect_pci(hose, + ld_le32((unsigned *) (p.PPCData)), + ld_le32((unsigned *) (p.PPCData+8))); +#undef p + } else + setup_indirect_pci(hose, 0x80000cf8, 0x80000cfc); + } + } + + ppc_md.pcibios_fixup = prep_pcibios_fixup; + ppc_md.pcibios_after_init = prep_pcibios_after_init; +} |