Merge commit 'v2.6.37-rc2' into sched/core

Merge reason: Move to a .37-rc base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

48 files changed, 1281 insertions, 1481 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 07b35ca2f644..2018c7ea4c93 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION
@@ -155,6 +148,8 @@ config SH_SDK7786
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
 	select NO_IOPORT if !PCI
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_SRAM_POOL
 	help
 	  Select SDK7786 if configuring for a Renesas Technology Europe
 	  SH7786-65nm board.
@@ -165,6 +160,11 @@ config SH_HIGHLANDER
 	select SYS_SUPPORTS_PCI
 	select IO_TRAPPED if MMU
 
+config SH_SH7757LCR
+	bool "SH7757LCR"
+	depends on CPU_SUBTYPE_SH7757
+	select ARCH_REQUIRE_GPIOLIB
+
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
@@ -309,6 +309,17 @@ config SH_POLARIS
 	help
 	  Select if configuring for an SMSC Polaris development board
 
+config SH_SH2007
+	bool "SH-2007 board"
+	select NO_IOPORT
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  SH-2007 is a single-board computer based around SH7780 chip
+	  intended for embedded applications.
+	  It has an Ethernet interface (SMC9118), direct connected
+	  Compact Flash socket, two serial ports and PC-104 bus.
+	  More information at <http://sh2000.sh-linux.org>.
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 4f90f9b7a922..be7d11d04b26 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -2,10 +2,14 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
+obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
 obj-$(CONFIG_SH_TITAN)		+= board-titan.o
+obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c
new file mode 100644
index 000000000000..4cb3bb74c36f
--- /dev/null
+++ b/arch/sh/boards/board-edosk7705.c
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	0x09
+
+static void __init sh_edosk7705_init_irq(void)
+{
+	make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+	&smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+	return platform_add_devices(edosk7705_devices,
+				    ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
+	.mv_nr_irqs		= 80,
+	.mv_init_irq		= sh_edosk7705_init_irq,
+};
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/board-secureedge5410.c
index 331745dee379..32f875e8493d 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/sh/boards/snapgear/setup.c
- *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
  *
@@ -19,18 +17,19 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <asm/machvec.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <cpu/timer.h>
 
+unsigned short secureedge5410_ioport;
+
 /*
  * EraseConfig handling functions
  */
-
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	(void)__raw_readb(0xb8000000);	/* dummy read */
+	ctrl_delay();	/* dummy read */
 
 	printk("SnapGear: erase switch interrupt!\n");
 
@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 
 static int __init eraseconfig_init(void)
 {
+	unsigned int irq = evt2irq(0x240);
+
 	printk("SnapGear: EraseConfig init\n");
+
 	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
 				"Erase Config", NULL))
 		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
+				irq);
 	else
 		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
+				irq);
+	return 0;
 }
-
 module_init(eraseconfig_init);
 
-/****************************************************************************/
 /*
  * Initialize IRQ setting
  *
@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
  * IRL2 = eth1
  * IRL3 = crypto
  */
-
 static void __init init_snapgear_IRQ(void)
 {
 	printk("Setup SnapGear IRQ/IPR ...\n");
@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
 static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
 	.mv_init_irq		= init_snapgear_IRQ,
 };
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
new file mode 100644
index 000000000000..b90b78f6a829
--- /dev/null
+++ b/arch/sh/boards/board-sh2007.c
@@ -0,0 +1,133 @@
+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004  SUGIOKA Toshinobu
+ * Copyright (C) 2010  Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+struct smsc911x_platform_config smc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+	[0] = {
+		.start	= SMC0_BASE,
+		.end	= SMC0_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource smsc9118_1_resources[] = {
+	[0] = {
+		.start	= SMC1_BASE,
+		.end	= SMC1_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x280),
+		.end	= evt2irq(0x280),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_0_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc9118_0_resources),
+	.resource	= smsc9118_0_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platform_device smsc9118_1_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(smsc9118_1_resources),
+	.resource	= smsc9118_1_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE + CF_OFFSET,
+		.end	= CF_BASE + CF_OFFSET + 0x0f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CF_BASE + CF_OFFSET + 0x206,
+		.end	= CF_BASE + CF_OFFSET + 0x20f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= evt2irq(0x2c0),
+		.end	= evt2irq(0x2c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_device  = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+	.resource	= cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+	&smsc9118_0_device,
+	&smsc9118_1_device,
+	&cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+	platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+	return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "SH-2007 Setup...");
+
+	/* setup wait control registers for area 5 */
+	__raw_writel(CS5BCR_D, CS5BCR);
+	__raw_writel(CS5WCR_D, CS5WCR);
+	__raw_writel(CS5PCR_D, CS5PCR);
+
+	printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+	.mv_setup		= sh2007_setup,
+	.mv_name		= "sh2007",
+	.mv_init_irq		= sh2007_init_irq,
+};
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
new file mode 100644
index 000000000000..c475f1056ab4
--- /dev/null
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -0,0 +1,374 @@
+/*
+ * Renesas R0P7757LC0012RL Support.
+ *
+ * Copyright (C) 2009 - 2010  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/io.h>
+#include <cpu/sh7757.h>
+#include <asm/sh_eth.h>
+#include <asm/heartbeat.h>
+
+static struct resource heartbeat_resource = {
+	.start	= 0xffec005c,	/* PUDR */
+	.end	= 0xffec005c,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Fast Ethernet */
+static struct resource sh_eth0_resources[] = {
+	{
+		.start  = 0xfef00000,
+		.end    = 0xfef001ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 84,
+		.end    = 84,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth0_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7757_eth0_device = {
+	.name		= "sh-eth",
+	.resource	= sh_eth0_resources,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sh_eth0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth0_pdata,
+	},
+};
+
+static struct resource sh_eth1_resources[] = {
+	{
+		.start  = 0xfef00800,
+		.end    = 0xfef009ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 84,
+		.end    = 84,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth1_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7757_eth1_device = {
+	.name		= "sh-eth",
+	.resource	= sh_eth1_resources,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sh_eth1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth1_pdata,
+	},
+};
+
+static struct platform_device *sh7757lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&sh7757_eth0_device,
+	&sh7757_eth1_device,
+};
+
+static int __init sh7757lcr_devices_setup(void)
+{
+	/* RGMII (PTA) */
+	gpio_request(GPIO_FN_ET0_MDC, NULL);
+	gpio_request(GPIO_FN_ET0_MDIO, NULL);
+	gpio_request(GPIO_FN_ET1_MDC, NULL);
+	gpio_request(GPIO_FN_ET1_MDIO, NULL);
+
+	/* ONFI (PTB, PTZ) */
+	gpio_request(GPIO_FN_ON_NRE, NULL);
+	gpio_request(GPIO_FN_ON_NWE, NULL);
+	gpio_request(GPIO_FN_ON_NWP, NULL);
+	gpio_request(GPIO_FN_ON_NCE0, NULL);
+	gpio_request(GPIO_FN_ON_R_B0, NULL);
+	gpio_request(GPIO_FN_ON_ALE, NULL);
+	gpio_request(GPIO_FN_ON_CLE, NULL);
+
+	gpio_request(GPIO_FN_ON_DQ7, NULL);
+	gpio_request(GPIO_FN_ON_DQ6, NULL);
+	gpio_request(GPIO_FN_ON_DQ5, NULL);
+	gpio_request(GPIO_FN_ON_DQ4, NULL);
+	gpio_request(GPIO_FN_ON_DQ3, NULL);
+	gpio_request(GPIO_FN_ON_DQ2, NULL);
+	gpio_request(GPIO_FN_ON_DQ1, NULL);
+	gpio_request(GPIO_FN_ON_DQ0, NULL);
+
+	/* IRQ8 to 0 (PTB, PTC) */
+	gpio_request(GPIO_FN_IRQ8, NULL);
+	gpio_request(GPIO_FN_IRQ7, NULL);
+	gpio_request(GPIO_FN_IRQ6, NULL);
+	gpio_request(GPIO_FN_IRQ5, NULL);
+	gpio_request(GPIO_FN_IRQ4, NULL);
+	gpio_request(GPIO_FN_IRQ3, NULL);
+	gpio_request(GPIO_FN_IRQ2, NULL);
+	gpio_request(GPIO_FN_IRQ1, NULL);
+	gpio_request(GPIO_FN_IRQ0, NULL);
+
+	/* SPI0 (PTD) */
+	gpio_request(GPIO_FN_SP0_MOSI, NULL);
+	gpio_request(GPIO_FN_SP0_MISO, NULL);
+	gpio_request(GPIO_FN_SP0_SCK, NULL);
+	gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP0_SS0, NULL);
+	gpio_request(GPIO_FN_SP0_SS1, NULL);
+	gpio_request(GPIO_FN_SP0_SS2, NULL);
+	gpio_request(GPIO_FN_SP0_SS3, NULL);
+
+	/* RMII 0/1 (PTE, PTF) */
+	gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
+	gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
+
+	/* eMMC (PTG) */
+	gpio_request(GPIO_FN_MMCCLK, NULL);
+	gpio_request(GPIO_FN_MMCCMD, NULL);
+	gpio_request(GPIO_FN_MMCDAT7, NULL);
+	gpio_request(GPIO_FN_MMCDAT6, NULL);
+	gpio_request(GPIO_FN_MMCDAT5, NULL);
+	gpio_request(GPIO_FN_MMCDAT4, NULL);
+	gpio_request(GPIO_FN_MMCDAT3, NULL);
+	gpio_request(GPIO_FN_MMCDAT2, NULL);
+	gpio_request(GPIO_FN_MMCDAT1, NULL);
+	gpio_request(GPIO_FN_MMCDAT0, NULL);
+
+	/* LPC (PTG, PTH, PTQ, PTU) */
+	gpio_request(GPIO_FN_SERIRQ, NULL);
+	gpio_request(GPIO_FN_LPCPD, NULL);
+	gpio_request(GPIO_FN_LDRQ, NULL);
+	gpio_request(GPIO_FN_WP, NULL);
+	gpio_request(GPIO_FN_FMS0, NULL);
+	gpio_request(GPIO_FN_LAD3, NULL);
+	gpio_request(GPIO_FN_LAD2, NULL);
+	gpio_request(GPIO_FN_LAD1, NULL);
+	gpio_request(GPIO_FN_LAD0, NULL);
+	gpio_request(GPIO_FN_LFRAME, NULL);
+	gpio_request(GPIO_FN_LRESET, NULL);
+	gpio_request(GPIO_FN_LCLK, NULL);
+	gpio_request(GPIO_FN_LGPIO7, NULL);
+	gpio_request(GPIO_FN_LGPIO6, NULL);
+	gpio_request(GPIO_FN_LGPIO5, NULL);
+	gpio_request(GPIO_FN_LGPIO4, NULL);
+
+	/* SPI1 (PTH) */
+	gpio_request(GPIO_FN_SP1_MOSI, NULL);
+	gpio_request(GPIO_FN_SP1_MISO, NULL);
+	gpio_request(GPIO_FN_SP1_SCK, NULL);
+	gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP1_SS0, NULL);
+	gpio_request(GPIO_FN_SP1_SS1, NULL);
+
+	/* SDHI (PTI) */
+	gpio_request(GPIO_FN_SD_WP, NULL);
+	gpio_request(GPIO_FN_SD_CD, NULL);
+	gpio_request(GPIO_FN_SD_CLK, NULL);
+	gpio_request(GPIO_FN_SD_CMD, NULL);
+	gpio_request(GPIO_FN_SD_D3, NULL);
+	gpio_request(GPIO_FN_SD_D2, NULL);
+	gpio_request(GPIO_FN_SD_D1, NULL);
+	gpio_request(GPIO_FN_SD_D0, NULL);
+
+	/* SCIF3/4 (PTJ, PTW) */
+	gpio_request(GPIO_FN_RTS3, NULL);
+	gpio_request(GPIO_FN_CTS3, NULL);
+	gpio_request(GPIO_FN_TXD3, NULL);
+	gpio_request(GPIO_FN_RXD3, NULL);
+	gpio_request(GPIO_FN_RTS4, NULL);
+	gpio_request(GPIO_FN_RXD4, NULL);
+	gpio_request(GPIO_FN_TXD4, NULL);
+	gpio_request(GPIO_FN_CTS4, NULL);
+
+	/* SERMUX (PTK, PTL, PTO, PTV) */
+	gpio_request(GPIO_FN_COM2_TXD, NULL);
+	gpio_request(GPIO_FN_COM2_RXD, NULL);
+	gpio_request(GPIO_FN_COM2_RTS, NULL);
+	gpio_request(GPIO_FN_COM2_CTS, NULL);
+	gpio_request(GPIO_FN_COM2_DTR, NULL);
+	gpio_request(GPIO_FN_COM2_DSR, NULL);
+	gpio_request(GPIO_FN_COM2_DCD, NULL);
+	gpio_request(GPIO_FN_COM2_RI, NULL);
+	gpio_request(GPIO_FN_RAC_RXD, NULL);
+	gpio_request(GPIO_FN_RAC_RTS, NULL);
+	gpio_request(GPIO_FN_RAC_CTS, NULL);
+	gpio_request(GPIO_FN_RAC_DTR, NULL);
+	gpio_request(GPIO_FN_RAC_DSR, NULL);
+	gpio_request(GPIO_FN_RAC_DCD, NULL);
+	gpio_request(GPIO_FN_RAC_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_RXD, NULL);
+	gpio_request(GPIO_FN_COM1_RTS, NULL);
+	gpio_request(GPIO_FN_COM1_CTS, NULL);
+
+	writeb(0x10, 0xfe470000);	/* SMR0: SerMux mode 0 */
+
+	/* IIC (PTM, PTR, PTS) */
+	gpio_request(GPIO_FN_SDA7, NULL);
+	gpio_request(GPIO_FN_SCL7, NULL);
+	gpio_request(GPIO_FN_SDA6, NULL);
+	gpio_request(GPIO_FN_SCL6, NULL);
+	gpio_request(GPIO_FN_SDA5, NULL);
+	gpio_request(GPIO_FN_SCL5, NULL);
+	gpio_request(GPIO_FN_SDA4, NULL);
+	gpio_request(GPIO_FN_SCL4, NULL);
+	gpio_request(GPIO_FN_SDA3, NULL);
+	gpio_request(GPIO_FN_SCL3, NULL);
+	gpio_request(GPIO_FN_SDA2, NULL);
+	gpio_request(GPIO_FN_SCL2, NULL);
+	gpio_request(GPIO_FN_SDA1, NULL);
+	gpio_request(GPIO_FN_SCL1, NULL);
+	gpio_request(GPIO_FN_SDA0, NULL);
+	gpio_request(GPIO_FN_SCL0, NULL);
+
+	/* USB (PTN) */
+	gpio_request(GPIO_FN_VBUS_EN, NULL);
+	gpio_request(GPIO_FN_VBUS_OC, NULL);
+
+	/* SGPIO1/0 (PTN, PTO) */
+	gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DO, NULL);
+	gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DO, NULL);
+
+	/* WDT (PTN) */
+	gpio_request(GPIO_FN_SUB_CLKIN, NULL);
+
+	/* System (PTT) */
+	gpio_request(GPIO_FN_STATUS1, NULL);
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* PWMX (PTT) */
+	gpio_request(GPIO_FN_PWMX1, NULL);
+	gpio_request(GPIO_FN_PWMX0, NULL);
+
+	/* R-SPI (PTV) */
+	gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
+	gpio_request(GPIO_FN_R_SPI_MISO, NULL);
+	gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
+
+	/* EVC (PTV, PTW) */
+	gpio_request(GPIO_FN_EVENT7, NULL);
+	gpio_request(GPIO_FN_EVENT6, NULL);
+	gpio_request(GPIO_FN_EVENT5, NULL);
+	gpio_request(GPIO_FN_EVENT4, NULL);
+	gpio_request(GPIO_FN_EVENT3, NULL);
+	gpio_request(GPIO_FN_EVENT2, NULL);
+	gpio_request(GPIO_FN_EVENT1, NULL);
+	gpio_request(GPIO_FN_EVENT0, NULL);
+
+	/* LED for heartbeat */
+	gpio_request(GPIO_PTU3, NULL);
+	gpio_direction_output(GPIO_PTU3, 1);
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_direction_output(GPIO_PTU1, 1);
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* control for MDIO of Gigabit Ethernet */
+	gpio_request(GPIO_PTT4, NULL);
+	gpio_direction_output(GPIO_PTT4, 1);
+
+	/* control for eMMC */
+	gpio_request(GPIO_PTT7, NULL);		/* eMMC_RST# */
+	gpio_direction_output(GPIO_PTT7, 0);
+	gpio_request(GPIO_PTT6, NULL);		/* eMMC_INDEX# */
+	gpio_direction_output(GPIO_PTT6, 0);
+	gpio_request(GPIO_PTT5, NULL);		/* eMMC_PRST# */
+	gpio_direction_output(GPIO_PTT5, 1);
+
+	/* General platform */
+	return platform_add_devices(sh7757lcr_devices,
+				    ARRAY_SIZE(sh7757lcr_devices));
+}
+arch_initcall(sh7757lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7757lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/* Initialize the board */
+static void __init sh7757lcr_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
+}
+
+static int sh7757lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S3 (Low active).
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN0;	/* Clock Mode: 1 */
+
+	return value;
+}
+
+/* The Machine Vector */
+static struct sh_machine_vector mv_sh7757lcr __initmv = {
+	.mv_name		= "SH7757LCR",
+	.mv_setup		= sh7757lcr_setup,
+	.mv_init_irq		= init_sh7757lcr_IRQ,
+	.mv_mode_pins		= sh7757lcr_mode_pins,
+};
+
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 3da116f47f01..07ea908c510d 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -176,6 +176,21 @@ static void ap320_wvga_power_off(void *board_data)
 	__raw_writew(0, FPGA_LCDREG);
 }
 
+const static struct fb_videomode ap325rxa_lcdc_modes[] = {
+	{
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 32,
+		.right_margin = 160,
+		.hsync_len = 8,
+		.upper_margin = 63,
+		.lower_margin = 80,
+		.vsync_len = 1,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
@@ -183,18 +198,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.bpp = 16,
 		.interface_type = RGB18,
 		.clock_divider = 1,
-		.lcd_cfg = {
-			.name = "LB070WV1",
-			.xres = 800,
-			.yres = 480,
-			.left_margin = 32,
-			.right_margin = 160,
-			.hsync_len = 8,
-			.upper_margin = 63,
-			.lower_margin = 80,
-			.vsync_len = 1,
-			.sync = 0, /* hsync and vsync are active low */
-		},
+		.lcd_cfg = ap325rxa_lcdc_modes,
+		.num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
@@ -481,7 +486,6 @@ static struct soc_camera_link ov7725_link = {
 	.power		= ov7725_power,
 	.board_info	= &ap325rxa_i2c_camera[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "ov772x",
 	.priv		= &ov7725_info,
 };
 
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 1394b078db36..d7ac5af9d102 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -55,8 +55,9 @@ static struct irqaction cayman_action_pci2 = {
 	.flags		= IRQF_DISABLED,
 };
 
-static void enable_cayman_irq(unsigned int irq)
+static void enable_cayman_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned long flags;
 	unsigned long mask;
 	unsigned int reg;
@@ -72,8 +73,9 @@ static void enable_cayman_irq(unsigned int irq)
 	local_irq_restore(flags);
 }
 
-void disable_cayman_irq(unsigned int irq)
+static void disable_cayman_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned long flags;
 	unsigned long mask;
 	unsigned int reg;
@@ -89,16 +91,10 @@ void disable_cayman_irq(unsigned int irq)
 	local_irq_restore(flags);
 }
 
-static void ack_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
 struct irq_chip cayman_irq_type = {
 	.name		= "Cayman-IRQ",
-	.unmask 	= enable_cayman_irq,
-	.mask		= disable_cayman_irq,
-	.mask_ack	= ack_cayman_irq,
+	.irq_unmask	= enable_cayman_irq,
+	.irq_mask	= disable_cayman_irq,
 };
 
 int cayman_irq_demux(int evt)
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index d932667410ab..72e7ac9549da 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -60,8 +60,9 @@
  */
 
 /* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(unsigned int irq)
+static inline void disable_systemasic_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
 	__u32 mask;
 
@@ -71,8 +72,9 @@ static inline void disable_systemasic_irq(unsigned int irq)
 }
 
 /* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(unsigned int irq)
+static inline void enable_systemasic_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
 	__u32 mask;
 
@@ -82,18 +84,19 @@ static inline void enable_systemasic_irq(unsigned int irq)
 }
 
 /* Acknowledge a hardware event by writing its bit back to its ESR */
-static void mask_ack_systemasic_irq(unsigned int irq)
+static void mask_ack_systemasic_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	__u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-	disable_systemasic_irq(irq);
+	disable_systemasic_irq(data);
 	outl((1 << EVENT_BIT(irq)), esr);
 }
 
 struct irq_chip systemasic_int = {
 	.name		= "System ASIC",
-	.mask		= disable_systemasic_irq,
-	.mask_ack	= mask_ack_systemasic_irq,
-	.unmask		= enable_systemasic_irq,
+	.irq_mask	= disable_systemasic_irq,
+	.irq_mask_ack	= mask_ack_systemasic_irq,
+	.irq_unmask	= enable_systemasic_irq,
 };
 
 /*
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 1d7b495a7db4..2eaeb9e59585 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -231,14 +231,41 @@ static struct platform_device usb1_common_device = {
 };
 
 /* LCDC */
+const static struct fb_videomode ecovec_lcd_modes[] = {
+	{
+		.name		= "Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0, /* hsync and vsync are active low */
+	},
+};
+
+const static struct fb_videomode ecovec_dvi_modes[] = {
+	{
+		.name		= "DVI",
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
 		.chan = LCDC_CHAN_MAINLCD,
 		.bpp = 16,
-		.lcd_cfg = {
-			.sync = 0, /* hsync and vsync are active low */
-		},
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
@@ -620,7 +647,6 @@ static struct soc_camera_link tw9910_link = {
 	.bus_id		= 1,
 	.power		= tw9910_power,
 	.board_info	= &i2c_camera[0],
-	.module_name	= "tw9910",
 	.priv		= &tw9910_info,
 };
 
@@ -644,7 +670,6 @@ static struct soc_camera_link mt9t112_link1 = {
 	.power		= mt9t112_power1,
 	.bus_id		= 0,
 	.board_info	= &i2c_camera[1],
-	.module_name	= "mt9t112",
 	.priv		= &mt9t112_info1,
 };
 
@@ -667,7 +692,6 @@ static struct soc_camera_link mt9t112_link2 = {
 	.power		= mt9t112_power2,
 	.bus_id		= 1,
 	.board_info	= &i2c_camera[2],
-	.module_name	= "mt9t112",
 	.priv		= &mt9t112_info2,
 };
 
@@ -793,7 +817,6 @@ static struct sh_vou_pdata sh_vou_pdata = {
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
 	.i2c_adap	= 0,
-	.module_name	= "ak881x",
 };
 
 static struct resource sh_vou_resources[] = {
@@ -1079,33 +1102,18 @@ static int __init arch_setup(void)
 	if (gpio_get_value(GPIO_PTE6)) {
 		/* DVI */
 		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
-		lcdc_info.ch[0].clock_divider		= 1,
-		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
-		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
-		lcdc_info.ch[0].lcd_cfg.yres		= 720;
-		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
-		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
-		lcdc_info.ch[0].lcd_cfg.hsync_len	= 40;
-		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
-		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
-		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+		lcdc_info.ch[0].clock_divider		= 1;
+		lcdc_info.ch[0].lcd_cfg			= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_dvi_modes);
 
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
 	} else {
 		/* Panel */
-
 		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
-		lcdc_info.ch[0].clock_divider		= 2,
-		lcdc_info.ch[0].lcd_cfg.name		= "Panel";
-		lcdc_info.ch[0].lcd_cfg.xres		= 800;
-		lcdc_info.ch[0].lcd_cfg.yres		= 480;
-		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
-		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
-		lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
-		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
-		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
-		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+		lcdc_info.ch[0].clock_divider		= 2;
+		lcdc_info.ch[0].lcd_cfg			= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_lcd_modes);
 
 		gpio_set_value(GPIO_PTR1, 1);
 
@@ -1248,14 +1256,14 @@ static int __init arch_setup(void)
 
 	/* set SPU2 clock to 83.4 MHz */
 	clk = clk_get(NULL, "spu_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 83333333));
 		clk_put(clk);
 	}
 
 	/* change parent of FSI B */
 	clk = clk_get(NULL, "fsib_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_register(&fsimckb_clk);
 		clk_set_parent(clk, &fsimckb_clk);
 		clk_set_rate(clk, 11000);
@@ -1273,7 +1281,7 @@ static int __init arch_setup(void)
 
 	/* set VPU clock to 166 MHz */
 	clk = clk_get(NULL, "vpu_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 166000000));
 		clk_put(clk);
 	}
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
deleted file mode 100644
index cd54acb51499..000000000000
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
deleted file mode 100644
index 5b9c57c43241..000000000000
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR	0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
-	/*
-	 * SMC91C96 registers are 4 byte aligned rather than the
-	 * usual 2 byte!
-	 */
-	if (port >= 0x300 && port < 0x320)
-		return SMC_IOADDR + ((port - 0x300) * 2);
-
-	maybebadio(port);
-	return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01)
-		return __raw_readw(port - 1) >> 8;
-
-	return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		__raw_writew(((unsigned short)value << 8), port - 1);
-		return;
-	}
-
-	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *p = addr;
-
-	while (count--)
-		*p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *p = (unsigned char *)addr;
-
-	while (count--)
-		sh_edosk7705_outb(*p++, port);
-}
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
deleted file mode 100644
index d59225e26fb9..000000000000
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/edosk7705.h>
-
-static void __init sh_edosk7705_init_irq(void)
-{
-	/* This is the Ethernet interrupt */
-	make_imask_irq(0x09);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
-	.mv_name		= "EDOSK7705",
-	.mv_nr_irqs		= 80,
-
-	.mv_inb			= sh_edosk7705_inb,
-	.mv_outb		= sh_edosk7705_outb,
-
-	.mv_insb		= sh_edosk7705_insb,
-	.mv_outsb		= sh_edosk7705_outsb,
-
-	.mv_init_irq		= sh_edosk7705_init_irq,
-};
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 68994a163f6c..9b60eaabf8f3 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -126,6 +126,21 @@ static struct platform_device kfr2r09_sh_keysc_device = {
 	},
 };
 
+const static struct fb_videomode kfr2r09_lcdc_modes[] = {
+	{
+		.name = "TX07D34VM0AAA",
+		.xres = 240,
+		.yres = 400,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.upper_margin = 0,
+		.lower_margin = 1,
+		.vsync_len = 1,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
 static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 	.clock_source = LCDC_CLK_BUS,
 	.ch[0] = {
@@ -134,18 +149,8 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 		.interface_type = SYS18,
 		.clock_divider = 6,
 		.flags = LCDC_FLAGS_DWPOL,
-		.lcd_cfg = {
-			.name = "TX07D34VM0AAA",
-			.xres = 240,
-			.yres = 400,
-			.left_margin = 0,
-			.right_margin = 16,
-			.hsync_len = 8,
-			.upper_margin = 0,
-			.lower_margin = 1,
-			.vsync_len = 1,
-			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		},
+		.lcd_cfg = kfr2r09_lcdc_modes,
+		.num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
 		.lcd_size_cfg = {
 			.width = 35,
 			.height = 58,
@@ -333,7 +338,6 @@ static struct soc_camera_link rj54n1_link = {
 	.power		= camera_power,
 	.board_info	= &kfr2r09_i2c_camera,
 	.i2c_adapter_id	= 1,
-	.module_name	= "rj54n1cb0c",
 	.priv		= &rj54n1_priv,
 };
 
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 01e6abb769b9..8132dff078fb 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -128,6 +128,7 @@ static const struct file_operations gio_fops = {
 	.open = gio_open,	/* open */
 	.release = gio_close,	/* release */
 	.unlocked_ioctl = gio_ioctl,
+	.llseek = noop_llseek,
 };
 
 static int __init gio_init(void)
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 96f38a4187d0..e79412a40490 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -18,25 +18,24 @@
 #include <linux/io.h>
 #include <mach-landisk/mach/iodata_landisk.h>
 
-static void disable_landisk_irq(unsigned int irq)
+static void disable_landisk_irq(struct irq_data *data)
 {
-	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+	unsigned char mask = 0xff ^ (0x01 << (data->irq - 5));
 
 	__raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
 }
 
-static void enable_landisk_irq(unsigned int irq)
+static void enable_landisk_irq(struct irq_data *data)
 {
-	unsigned char value = (0x01 << (irq - 5));
+	unsigned char value = (0x01 << (data->irq - 5));
 
 	__raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
 }
 
 static struct irq_chip landisk_irq_chip __read_mostly = {
 	.name		= "LANDISK",
-	.mask		= disable_landisk_irq,
-	.unmask		= enable_landisk_irq,
-	.mask_ack	= disable_landisk_irq,
+	.irq_mask	= disable_landisk_irq,
+	.irq_unmask	= enable_landisk_irq,
 };
 
 /*
@@ -50,7 +49,7 @@ void __init init_landisk_IRQ(void)
 		disable_irq_nosync(i);
 		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
 					      handle_level_irq, "level");
-		enable_landisk_irq(i);
+		enable_landisk_irq(irq_get_irq_data(i));
 	}
 	__raw_writeb(0x00, PA_PWRINT_CLR);
 }
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 2960c659020e..acdafb0c6404 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -54,7 +54,7 @@
 /*
  * map I/O ports to memory-mapped addresses
  */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
 {
 	unsigned long result;
 
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 			 *	Configuration Registers
 			 */
 		result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-		   offset == KBD_STATUS_REG) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
 	} else if (((offset >= IO_IDE1_BASE) &&
 		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
 		    (offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 		result = PVR;
 	}
 
-	return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-	/* System board present, just make a dummy SRAM access.  (CS0 will be
-	   mapped to PCI memory, probably good to avoid it.) */
-	__raw_readw(0xa6800000);
-#else
-	/* CS0 will be mapped to flash, ROM etc so safe to access it. */
-	__raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inb(port);
-#endif
-	return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inw(port);
-#endif
-	return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inl(port);
-#endif
-	return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outw(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outb(b, port);
-		return;
-	}
-#endif
-
-	/*
-	 *	There is a board feature with the current SH4-202 MicroDev in
-	 *	that the 2 byte enables (nBE0 and nBE1) are tied together (and
-	 *	to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-	 *	it is not possible to safely perform 8-bit writes to the
-	 *	Ethernet registers, as 16-bits will be consumed from the Data
-	 *	lines (corrupting the other byte).  Hence, this function is
-	 *	written to implement 16-bit read/modify/write for all byte-wide
-	 *	accesses.
-	 *
-	 *	Note: there is no problem with byte READS (even or odd).
-	 *
-	 *			Sean McGoogan - 16th June 2003.
-	 */
-	if ((port >= IO_LAN91C111_BASE) &&
-	    (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 * Then are trying to perform a byte-write to the
-			 * LAN91C111.  This needs special care.
-			 */
-		if (port % 2 == 1) {	/* is the port odd ? */
-			/* unset bit-0, i.e. make even */
-			const unsigned long evenPort = port-1;
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving even byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(evenPort);
-			word = (word & 0xffu) | (b << 8);
-			microdev_outw(word, evenPort);
-		} else {
-			/* else, we are trying to do an even byte write */
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving odd byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(port);
-			word = (word & 0xff00u) | (b);
-			microdev_outw(word, port);
-		}
-	} else {
-		*(volatile unsigned char*)PORT2ADDR(port) = b;
-	}
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outl(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-	unsigned char v = microdev_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-	unsigned short v = microdev_inw(port);
-	delay();
-	return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-	unsigned int v = microdev_inl(port);
-	delay();
-	return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-	microdev_outb(b, port);
-	delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-	microdev_outw(b, port);
-	delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-	microdev_outl(b, port);
-	delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	const unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	const unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	const unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
+	return (void __iomem *)result;
 }
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index a26d16669aa2..c35001fd9032 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -65,19 +65,9 @@ static const struct {
 #  error Inconsistancy in defining the IRQ# for primary IDE!
 #endif
 
-static void enable_microdev_irq(unsigned int irq);
-static void disable_microdev_irq(unsigned int irq);
-static void mask_and_ack_microdev(unsigned int);
-
-static struct irq_chip microdev_irq_type = {
-	.name = "MicroDev-IRQ",
-	.unmask = enable_microdev_irq,
-	.mask = disable_microdev_irq,
-	.ack = mask_and_ack_microdev,
-};
-
-static void disable_microdev_irq(unsigned int irq)
+static void disable_microdev_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned int fpgaIrq;
 
 	if (irq >= NUM_EXTERNAL_IRQS)
@@ -91,8 +81,9 @@ static void disable_microdev_irq(unsigned int irq)
 	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
 }
 
-static void enable_microdev_irq(unsigned int irq)
+static void enable_microdev_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned long priorityReg, priorities, pri;
 	unsigned int fpgaIrq;
 
@@ -116,17 +107,18 @@ static void enable_microdev_irq(unsigned int irq)
 	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
 }
 
+static struct irq_chip microdev_irq_type = {
+	.name = "MicroDev-IRQ",
+	.irq_unmask = enable_microdev_irq,
+	.irq_mask = disable_microdev_irq,
+};
+
 /* This function sets the desired irq handler to be a MicroDev type */
 static void __init make_microdev_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
 	set_irq_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
-	disable_microdev_irq(irq);
-}
-
-static void mask_and_ack_microdev(unsigned int irq)
-{
-	disable_microdev_irq(irq);
+	disable_microdev_irq(irq_get_irq_data(irq));
 }
 
 extern void __init init_microdev_irq(void)
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index d1df2a4fb9b8..d8a747291e03 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup);
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= microdev_inb,
-	.mv_inw			= microdev_inw,
-	.mv_inl			= microdev_inl,
-	.mv_outb		= microdev_outb,
-	.mv_outw		= microdev_outw,
-	.mv_outl		= microdev_outl,
-
-	.mv_inb_p		= microdev_inb_p,
-	.mv_inw_p		= microdev_inw_p,
-	.mv_inl_p		= microdev_inl_p,
-	.mv_outb_p		= microdev_outb_p,
-	.mv_outw_p		= microdev_outw_p,
-	.mv_outl_p		= microdev_outl_p,
-
-	.mv_insb		= microdev_insb,
-	.mv_insw		= microdev_insw,
-	.mv_insl		= microdev_insl,
-	.mv_outsb		= microdev_outsb,
-	.mv_outsw		= microdev_outsw,
-	.mv_outsl		= microdev_outsl,
-
+	.mv_ioport_map		= microdev_ioport_map,
 	.mv_init_irq		= init_microdev_irq,
 };
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 662debe4ead2..c8acfec98695 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -213,51 +213,55 @@ static struct platform_device migor_nand_flash_device = {
 	}
 };
 
+const static struct fb_videomode migor_lcd_modes[] = {
+	{
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 64,
+		.right_margin = 16,
+		.hsync_len = 120,
+		.sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+		.name = "PH240320T",
+		.xres = 320,
+		.yres = 240,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+		.upper_margin = 1,
+		.lower_margin = 17,
+		.vsync_len = 2,
+	},
+};
+
 static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
 	.clock_source = LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.bpp = 16,
 		.interface_type = RGB16,
 		.clock_divider = 2,
-		.lcd_cfg = {
-			.name = "LB070WV1",
-			.xres = 800,
-			.yres = 480,
-			.left_margin = 64,
-			.right_margin = 16,
-			.hsync_len = 120,
-			.upper_margin = 1,
-			.lower_margin = 17,
-			.vsync_len = 2,
-			.sync = 0,
-		},
+		.lcd_cfg = migor_lcd_modes,
+		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
 		},
 	}
-#endif
-#ifdef CONFIG_SH_MIGOR_QVGA
+#elif defined(CONFIG_SH_MIGOR_QVGA)
 	.clock_source = LCDC_CLK_PERIPHERAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.bpp = 16,
 		.interface_type = SYS16A,
 		.clock_divider = 10,
-		.lcd_cfg = {
-			.name = "PH240320T",
-			.xres = 320,
-			.yres = 240,
-			.left_margin = 0,
-			.right_margin = 16,
-			.hsync_len = 8,
-			.upper_margin = 1,
-			.lower_margin = 17,
-			.vsync_len = 2,
-			.sync = FB_SYNC_HOR_HIGH_ACT,
-		},
+		.lcd_cfg = migor_lcd_modes,
+		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
 		.lcd_size_cfg = { /* 2.4 inch */
 			.width = 49,
 			.height = 37,
@@ -450,7 +454,6 @@ static struct soc_camera_link ov7725_link = {
 	.power		= ov7725_power,
 	.board_info	= &migor_i2c_camera[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "ov772x",
 	.priv		= &ov7725_info,
 };
 
@@ -463,7 +466,6 @@ static struct soc_camera_link tw9910_link = {
 	.power		= tw9910_power,
 	.board_info	= &migor_i2c_camera[1],
 	.i2c_adapter_id	= 0,
-	.module_name	= "tw9910",
 	.priv		= &tw9910_info,
 };
 
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index a29f19e85b63..23ff7d4ac491 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1 +1,4 @@
-obj-y	:= setup.o fpga.o irq.o
+obj-y	:= fpga.o irq.o setup.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c
new file mode 100644
index 000000000000..f71ce09d4e15
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * SDK7786 FPGA USRGPIR Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/fpga.h>
+
+#define NR_FPGA_GPIOS	8
+
+static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
+	"in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
+};
+
+static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	/* always in */
+	return 0;
+}
+
+static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
+}
+
+static struct gpio_chip usrgpir_gpio_chip = {
+	.label			= "sdk7786-fpga",
+	.names			= usrgpir_gpio_names,
+	.direction_input	= usrgpir_gpio_direction_input,
+	.get			= usrgpir_gpio_get,
+	.base			= -1, /* don't care */
+	.ngpio			= NR_FPGA_GPIOS,
+};
+
+static int __init usrgpir_gpio_setup(void)
+{
+	return gpiochip_add(&usrgpir_gpio_chip);
+}
+device_initcall(usrgpir_gpio_setup);
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 2ec1ea5cf8ef..7e0c4e3878e0 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -20,6 +20,8 @@
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
+#include <asm/clock.h>
+#include <asm/clkdev.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>
 
@@ -140,6 +142,45 @@ static int sdk7786_mode_pins(void)
 	return fpga_read_reg(MODSWR);
 }
 
+/*
+ * FPGA-driven PCIe clocks
+ *
+ * Historically these include the oscillator, clock B (slots 2/3/4) and
+ * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
+ * everything under a single PCIe clocks enable bit that happens to map
+ * to the same bit position as the oscillator bit for earlier FPGA
+ * versions.
+ *
+ * Given that the legacy clocks have the side-effect of shutting the CPU
+ * off through the FPGA along with the PCI slots, we simply leave them in
+ * their initial state and don't bother registering them with the clock
+ * framework.
+ */
+static int sdk7786_pcie_clk_enable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
+	return 0;
+}
+
+static void sdk7786_pcie_clk_disable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
+}
+
+static struct clk_ops sdk7786_pcie_clk_ops = {
+	.enable		= sdk7786_pcie_clk_enable,
+	.disable	= sdk7786_pcie_clk_disable,
+};
+
+static struct clk sdk7786_pcie_clk = {
+	.ops		= &sdk7786_pcie_clk_ops,
+};
+
+static struct clk_lookup sdk7786_pcie_cl = {
+	.con_id		= "pcie_plat_clk",
+	.clk		= &sdk7786_pcie_clk,
+};
+
 static int sdk7786_clk_init(void)
 {
 	struct clk *clk;
@@ -158,7 +199,18 @@ static int sdk7786_clk_init(void)
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);
 
-	return ret;
+	/*
+	 * Setup the FPGA clocks.
+	 */
+	ret = clk_register(&sdk7786_pcie_clk);
+	if (unlikely(ret)) {
+		pr_err("FPGA clock registration failed\n");
+		return ret;
+	}
+
+	clkdev_add(&sdk7786_pcie_cl);
+
+	return 0;
 }
 
 static void sdk7786_restart(char *cmd)
diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c
new file mode 100644
index 000000000000..c81c3abbe01c
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/sram.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA SRAM Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+#include <asm/sram.h>
+#include <asm/sizes.h>
+
+static int __init fpga_sram_init(void)
+{
+	unsigned long phys;
+	unsigned int area;
+	void __iomem *vaddr;
+	int ret;
+	u16 data;
+
+	/* Enable FPGA SRAM */
+	data = fpga_read_reg(LCLASR);
+	data |= LCLASR_FRAMEN;
+	fpga_write_reg(data, LCLASR);
+
+	/*
+	 * FPGA_SEL determines the area mapping
+	 */
+	area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
+	if (unlikely(area == LCLASR_AREA_MASK)) {
+		pr_err("FPGA memory unmapped.\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * The memory itself occupies a 2KiB range at the top of the area
+	 * immediately below the system registers.
+	 */
+	phys = (area << 26) + SZ_64M - SZ_4K;
+
+	/*
+	 * The FPGA SRAM resides in translatable physical space, so set
+	 * up a mapping prior to inserting it in to the pool.
+	 */
+	vaddr = ioremap(phys, SZ_2K);
+	if (unlikely(!vaddr)) {
+		pr_err("Failed remapping FPGA memory.\n");
+		return -ENXIO;
+	}
+
+	pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
+		"(area %d) to pool.\n",
+		SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
+
+	ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
+	if (unlikely(ret < 0)) {
+		pr_err("Failed adding memory\n");
+		iounmap(vaddr);
+		return ret;
+	}
+
+	return 0;
+}
+postcore_initcall(fpga_sram_init);
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..5c9eaa0535b9 100644
--- a/arch/sh/boards/mach-se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7206 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
deleted file mode 100644
index adadc77532ee..000000000000
--- a/arch/sh/boards/mach-se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
-	__raw_readw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index 8d82175d83ab..d961949600fd 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -25,8 +25,9 @@
 #define INTC_IPR01 0xfffe0818
 #define INTC_ICR1  0xfffe0802
 
-static void disable_se7206_irq(unsigned int irq)
+static void disable_se7206_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned short val;
 	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
 	unsigned short msk0,msk1;
@@ -55,8 +56,9 @@ static void disable_se7206_irq(unsigned int irq)
 	__raw_writew(msk1, INTMSK1);
 }
 
-static void enable_se7206_irq(unsigned int irq)
+static void enable_se7206_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned short val;
 	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
 	unsigned short msk0,msk1;
@@ -86,13 +88,14 @@ static void enable_se7206_irq(unsigned int irq)
 	__raw_writew(msk1, INTMSK1);
 }
 
-static void eoi_se7206_irq(unsigned int irq)
+static void eoi_se7206_irq(struct irq_data *data)
 {
 	unsigned short sts0,sts1;
+	unsigned int irq = data->irq;
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_se7206_irq(irq);
+		enable_se7206_irq(data);
 	/* FPGA isr clear */
 	sts0 = __raw_readw(INTSTS0);
 	sts1 = __raw_readw(INTSTS1);
@@ -115,10 +118,9 @@ static void eoi_se7206_irq(unsigned int irq)
 
 static struct irq_chip se7206_irq_chip __read_mostly = {
 	.name		= "SE7206-FPGA",
-	.mask		= disable_se7206_irq,
-	.unmask		= enable_se7206_irq,
-	.mask_ack	= disable_se7206_irq,
-	.eoi		= eoi_se7206_irq,
+	.irq_mask	= disable_se7206_irq,
+	.irq_unmask	= enable_se7206_irq,
+	.irq_eoi	= eoi_se7206_irq,
 };
 
 static void make_se7206_irq(unsigned int irq)
@@ -126,7 +128,7 @@ static void make_se7206_irq(unsigned int irq)
 	disable_irq_nosync(irq);
 	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
 				      handle_level_irq, "level");
-	disable_se7206_irq(irq);
+	disable_se7206_irq(irq_get_irq_data(irq));
 }
 
 /*
@@ -137,11 +139,13 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	__raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
 	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
 	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
 	__raw_writew(0x0001,INTSEL);
 }
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 8f5c65d43d1d..7f4871c71a01 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -86,20 +86,5 @@ __initcall(se7206_devices_setup);
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
 	.mv_init_irq		= init_se7206_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index d4305c26e9f7..76255a19417f 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -18,23 +18,22 @@
 
 unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
 
-static void disable_se7343_irq(unsigned int irq)
+static void disable_se7343_irq(struct irq_data *data)
 {
-	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
 	__raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
 }
 
-static void enable_se7343_irq(unsigned int irq)
+static void enable_se7343_irq(struct irq_data *data)
 {
-	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
 	__raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
 }
 
 static struct irq_chip se7343_irq_chip __read_mostly = {
-	.name           = "SE7343-FPGA",
-	.mask           = disable_se7343_irq,
-	.unmask         = enable_se7343_irq,
-	.mask_ack       = disable_se7343_irq,
+	.name		= "SE7343-FPGA",
+	.irq_mask	= disable_se7343_irq,
+	.irq_unmask	= enable_se7343_irq,
 };
 
 static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..43ea14feef51 100644
--- a/arch/sh/boards/mach-se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
deleted file mode 100644
index 28833c8786ea..000000000000
--- a/arch/sh/boards/mach-se/770x/io.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (shifted_port(port))
-		return (*port2adr(port) >> 8);
-	else
-		return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (shifted_port(port))
-		v = (*port2adr(port) >> 8);
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 66d39d1b0901..31330c65c0ce 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = {
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 	.mv_nr_irqs             = 104,
 #endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
 	.mv_init_irq		= init_se_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 61605db04ee6..c013f95628ed 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -18,23 +18,22 @@
 
 unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
 
-static void disable_se7722_irq(unsigned int irq)
+static void disable_se7722_irq(struct irq_data *data)
 {
-	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
 	__raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
 }
 
-static void enable_se7722_irq(unsigned int irq)
+static void enable_se7722_irq(struct irq_data *data)
 {
-	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
 	__raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
 }
 
 static struct irq_chip se7722_irq_chip __read_mostly = {
-	.name           = "SE7722-FPGA",
-	.mask           = disable_se7722_irq,
-	.unmask         = enable_se7722_irq,
-	.mask_ack       = disable_se7722_irq,
+	.name		= "SE7722-FPGA",
+	.irq_mask	= disable_se7722_irq,
+	.irq_unmask	= enable_se7722_irq,
 };
 
 static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index 0942be2daef6..5bd87c22b65b 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -68,25 +68,26 @@ static struct fpga_irq get_fpga_irq(unsigned int irq)
 	return set;
 }
 
-static void disable_se7724_irq(unsigned int irq)
+static void disable_se7724_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
 	unsigned int bit = irq - set.base;
 	__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
 }
 
-static void enable_se7724_irq(unsigned int irq)
+static void enable_se7724_irq(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
 	unsigned int bit = irq - set.base;
 	__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
 }
 
 static struct irq_chip se7724_irq_chip __read_mostly = {
-	.name           = "SE7724-FPGA",
-	.mask           = disable_se7724_irq,
-	.unmask         = enable_se7724_irq,
-	.mask_ack       = disable_se7724_irq,
+	.name		= "SE7724-FPGA",
+	.irq_mask	= disable_se7724_irq,
+	.irq_unmask	= enable_se7724_irq,
 };
 
 static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 552ebd9ba82b..c31d228fdfc6 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -144,16 +144,42 @@ static struct platform_device nor_flash_device = {
 };
 
 /* LCDC */
+const static struct fb_videomode lcdc_720p_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+	},
+};
+
+const static struct fb_videomode lcdc_vga_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 640,
+		.yres		= 480,
+		.left_margin	= 105,
+		.right_margin	= 50,
+		.hsync_len	= 96,
+		.upper_margin	= 33,
+		.lower_margin	= 10,
+		.vsync_len	= 2,
+	},
+};
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.bpp = 16,
 		.clock_divider = 1,
-		.lcd_cfg = {
-			.name = "LB070WV1",
-			.sync = 0, /* hsync and vsync are active low */
-		},
 		.lcd_size_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
@@ -550,7 +576,6 @@ static struct sh_vou_pdata sh_vou_pdata = {
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
 	.i2c_adap	= 0,
-	.module_name	= "ak881x",
 };
 
 static struct resource sh_vou_resources[] = {
@@ -909,24 +934,12 @@ static int __init devices_setup(void)
 
 	if (sw & SW41_B) {
 		/* 720p */
-		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
-		lcdc_info.ch[0].lcd_cfg.yres         = 720;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
+		lcdc_info.ch[0].lcd_cfg	= lcdc_720p_modes;
+		lcdc_info.ch[0].num_cfg	= ARRAY_SIZE(lcdc_720p_modes);
 	} else {
 		/* VGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 640;
-		lcdc_info.ch[0].lcd_cfg.yres         = 480;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 105;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 50;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		lcdc_info.ch[0].lcd_cfg	= lcdc_vga_modes;
+		lcdc_info.ch[0].num_cfg	= ARRAY_SIZE(lcdc_vga_modes);
 	}
 
 	if (sw & SW41_A) {
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index e6f4341bfe6e..a338fd9d5039 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
deleted file mode 100644
index 6e75bd4459e5..000000000000
--- a/arch/sh/boards/mach-se/7751/io.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index 50572512e3e8..9fbc51beb181 100644
--- a/arch/sh/boards/mach-se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -56,23 +56,5 @@ __initcall(se7751_devices_setup);
 static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
 	.mv_init_irq		= init_7751se_IRQ,
 };
diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
deleted file mode 100644
index d2d2f4b6a502..000000000000
--- a/arch/sh/boards/mach-snapgear/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
deleted file mode 100644
index 476650e42dbc..000000000000
--- a/arch/sh/boards/mach-snapgear/io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-unsigned short secureedge5410_ioport;
-#endif
-
-static inline volatile __u16 *port2adr(unsigned int port)
-{
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char snapgear_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char snapgear_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-	if (PXSEG(port))
-		v = *(volatile unsigned char *)port;
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short snapgear_inw(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int snapgear_inl(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void snapgear_outb(unsigned char value, unsigned long port)
-{
-
-	if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void snapgear_outb_p(unsigned char value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void snapgear_outw(unsigned short value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void snapgear_outl(unsigned int value, unsigned long port)
-{
-	if (PXSEG(port))
-		*(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void snapgear_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
deleted file mode 100644
index 2cc6a23d9d39..000000000000
--- a/arch/sh/boards/mach-systemh/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the SystemH specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o io.o
-
-# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more
-# importantly, with the generic sh7751_pcic_init() code. For now, we'll
-# just abuse the hell out of kbuild, because we can..
-
-obj-$(CONFIG_PCI) += pci.o
-pci-y := ../../se/7751/pci.o
-
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
deleted file mode 100644
index 15577ff1f715..000000000000
--- a/arch/sh/boards/mach-systemh/io.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 Systemh.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <mach/systemh7751.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
-                                                of smc lan chip*/
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751systemh_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (port <= 0x3F1)
-		return *(volatile unsigned char *)ETHER_IOMAP(port);
-	else
-		return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751systemh_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else if (port <= 0x3F1)
-		v = *(volatile unsigned char *)ETHER_IOMAP(port);
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751systemh_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else if (port <= 0x3F1)
-		return *(volatile unsigned int *)ETHER_IOMAP(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751systemh_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else if (port <= 0x3F1)
-		return *(volatile unsigned int *)ETHER_IOMAP(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751systemh_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751systemh_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751systemh_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else if (port <= 0x3F1)
-		*(volatile unsigned short *)ETHER_IOMAP(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751systemh_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *p = addr;
-	while (count--) *p++ = sh7751systemh_inb(port);
-}
-
-void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *p = addr;
-	while (count--) *p++ = sh7751systemh_inw(port);
-}
-
-void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *p = (unsigned char*)addr;
-	while (count--) sh7751systemh_outb(*p++, port);
-}
-
-void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *p = (unsigned short*)addr;
-	while (count--) sh7751systemh_outw(*p++, port);
-}
-
-void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
deleted file mode 100644
index 523aea5dc94e..000000000000
--- a/arch/sh/boards/mach-systemh/irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <mach/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-/* forward declaration */
-static void enable_systemh_irq(unsigned int irq);
-static void disable_systemh_irq(unsigned int irq);
-static void mask_and_ack_systemh(unsigned int);
-
-static struct irq_chip systemh_irq_type = {
-	.name = " SystemH Register",
-	.unmask = enable_systemh_irq,
-	.mask = disable_systemh_irq,
-	.ack = mask_and_ack_systemh,
-};
-
-static void disable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Clear the "irq"th bit in the mask and set it in the request */
-		val = __raw_readl((unsigned long)systemh_irq_mask_register);
-		val &= ~mask;
-		__raw_writel(val, (unsigned long)systemh_irq_mask_register);
-
-		val = __raw_readl((unsigned long)systemh_irq_request_register);
-		val |= mask;
-		__raw_writel(val, (unsigned long)systemh_irq_request_register);
-	}
-}
-
-static void enable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Set "irq"th bit in the mask register */
-		val = __raw_readl((unsigned long)systemh_irq_mask_register);
-		val |= mask;
-		__raw_writel(val, (unsigned long)systemh_irq_mask_register);
-	}
-}
-
-static void mask_and_ack_systemh(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-void make_systemh_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
-	disable_systemh_irq(irq);
-}
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
deleted file mode 100644
index 219fd800a43f..000000000000
--- a/arch/sh/boards/mach-systemh/setup.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2003  Paul Mundt
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by Jonathan Short.
- *
- * Rewritten for 2.6 by Paul Mundt.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <mach/systemh7751.h>
-
-extern void make_systemh_irq(unsigned int irq);
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7751systemh_init_irq(void)
-{
-	make_systemh_irq(0xb);	/* Ethernet interrupt */
-}
-
-static struct sh_machine_vector mv_7751systemh __initmv = {
-	.mv_name		= "7751 SystemH",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751systemh_inb,
-	.mv_inw			= sh7751systemh_inw,
-	.mv_inl			= sh7751systemh_inl,
-	.mv_outb		= sh7751systemh_outb,
-	.mv_outw		= sh7751systemh_outw,
-	.mv_outl		= sh7751systemh_outl,
-
-	.mv_inb_p		= sh7751systemh_inb_p,
-	.mv_inw_p		= sh7751systemh_inw,
-	.mv_inl_p		= sh7751systemh_inl,
-	.mv_outb_p		= sh7751systemh_outb_p,
-	.mv_outw_p		= sh7751systemh_outw,
-	.mv_outl_p		= sh7751systemh_outl,
-
-	.mv_insb		= sh7751systemh_insb,
-	.mv_insw		= sh7751systemh_insw,
-	.mv_insl		= sh7751systemh_insl,
-	.mv_outsb		= sh7751systemh_outsb,
-	.mv_outsw		= sh7751systemh_outsw,
-	.mv_outsl		= sh7751systemh_outsl,
-
-	.mv_init_irq		= sh7751systemh_init_irq,
-};
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fecf..708c21c919ff 100644
--- a/arch/sh/boards/mach-x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
@@ -1 +1,3 @@
 obj-y += setup.o ilsel.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
new file mode 100644
index 000000000000..239e74066253
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/gpio.c
@@ -0,0 +1,136 @@
+/*
+ * arch/sh/boards/mach-x3proto/gpio.c
+ *
+ * Renesas SH-X3 Prototype Baseboard GPIO Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+
+#define KEYCTLR	0xb81c0000
+#define KEYOUTR	0xb81c0002
+#define KEYDETR 0xb81c0004
+
+static DEFINE_SPINLOCK(x3proto_gpio_lock);
+static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, };
+
+static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	unsigned long flags;
+	unsigned int data;
+
+	spin_lock_irqsave(&x3proto_gpio_lock, flags);
+	data = __raw_readw(KEYCTLR);
+	data |= (1 << gpio);
+	__raw_writew(data, KEYCTLR);
+	spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+
+	return 0;
+}
+
+static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(__raw_readw(KEYDETR) & (1 << gpio));
+}
+
+static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return x3proto_gpio_irq_map[gpio];
+}
+
+static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int pin;
+
+	chip->irq_mask_ack(data);
+
+	mask = __raw_readw(KEYDETR);
+
+	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
+		generic_handle_irq(x3proto_gpio_to_irq(NULL, pin));
+
+	chip->irq_unmask(data);
+}
+
+struct gpio_chip x3proto_gpio_chip = {
+	.label			= "x3proto-gpio",
+	.direction_input	= x3proto_gpio_direction_input,
+	.get			= x3proto_gpio_get,
+	.to_irq			= x3proto_gpio_to_irq,
+	.base			= -1,
+	.ngpio			= NR_BASEBOARD_GPIOS,
+};
+
+int __init x3proto_gpio_setup(void)
+{
+	int ilsel;
+	int ret, i;
+
+	ilsel = ilsel_enable(ILSEL_KEY);
+	if (unlikely(ilsel < 0))
+		return ilsel;
+
+	ret = gpiochip_add(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		goto err_gpio;
+
+	for (i = 0; i < NR_BASEBOARD_GPIOS; i++) {
+		unsigned long flags;
+		int irq = create_irq();
+
+		if (unlikely(irq < 0)) {
+			ret = -EINVAL;
+			goto err_irq;
+		}
+
+		spin_lock_irqsave(&x3proto_gpio_lock, flags);
+		x3proto_gpio_irq_map[i] = irq;
+		set_irq_chip_and_handler_name(irq, &dummy_irq_chip,
+					handle_simple_irq, "gpio");
+		spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+	}
+
+	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
+		"bound to IRQ %u\n",
+		x3proto_gpio_chip.label, x3proto_gpio_chip.base,
+		x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
+		ilsel);
+
+	set_irq_chained_handler(ilsel, x3proto_gpio_irq_handler);
+	set_irq_wake(ilsel, 1);
+
+	return 0;
+
+err_irq:
+	for (; i >= 0; --i)
+		if (x3proto_gpio_irq_map[i])
+			destroy_irq(x3proto_gpio_irq_map[i]);
+
+	ret = gpiochip_remove(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		pr_err("Failed deregistering GPIO\n");
+
+err_gpio:
+	synchronize_irq(ilsel);
+
+	ilsel_disable(ILSEL_KEY);
+
+	return ret;
+}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index 5c9842704c60..95e346139515 100644
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
@@ -1,20 +1,22 @@
 /*
- * arch/sh/boards/renesas/x3proto/ilsel.c
+ * arch/sh/boards/mach-x3proto/ilsel.c
  *
  * Helper routines for SH-X3 proto board ILSEL.
  *
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/bitmap.h>
 #include <linux/io.h>
-#include <asm/ilsel.h>
+#include <mach/ilsel.h>
 
 /*
  * ILSEL is split across:
@@ -64,6 +66,8 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
 	unsigned int tmp, shift;
 	unsigned long addr;
 
+	pr_notice("enabling ILSEL set %d\n", set);
+
 	addr = mk_ilsel_addr(bit);
 	shift = mk_ilsel_shift(bit);
 
@@ -92,8 +96,10 @@ int ilsel_enable(ilsel_source_t set)
 {
 	unsigned int bit;
 
-	/* Aliased sources must use ilsel_enable_fixed() */
-	BUG_ON(set > ILSEL_KEY);
+	if (unlikely(set > ILSEL_KEY)) {
+		pr_err("Aliased sources must use ilsel_enable_fixed()\n");
+		return -EINVAL;
+	}
 
 	do {
 		bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
@@ -140,6 +146,8 @@ void ilsel_disable(unsigned int irq)
 	unsigned long addr;
 	unsigned int tmp;
 
+	pr_notice("disabling ILSEL set %d\n", irq);
+
 	addr = mk_ilsel_addr(irq);
 
 	tmp = __raw_readw(addr);
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 102bf56befb4..d682e2b6a856 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -1,9 +1,9 @@
 /*
- * arch/sh/boards/renesas/x3proto/setup.c
+ * arch/sh/boards/mach-x3proto/setup.c
  *
  * Renesas SH-X3 Prototype Board Support.
  *
- * Copyright (C) 2007 - 2008 Paul Mundt
+ * Copyright (C) 2007 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -16,9 +16,13 @@
 #include <linux/smc91x.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/input.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
-#include <asm/ilsel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
 #include <asm/smp-ops.h>
 
 static struct resource heartbeat_resources[] = {
@@ -122,15 +126,128 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.resource	= m66592_usb_peripheral_resources,
 };
 
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+	{
+		.desc		= "key44",
+		.code		= KEY_POWER,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key43",
+		.code		= KEY_SUSPEND,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key42",
+		.code		= KEY_KATAKANAHIRAGANA,
+		.active_low	= 1,
+	}, {
+		.desc		= "key41",
+		.code		= KEY_SWITCHVIDEOMODE,
+		.active_low	= 1,
+	}, {
+		.desc		= "key34",
+		.code		= KEY_F12,
+		.active_low	= 1,
+	}, {
+		.desc		= "key33",
+		.code		= KEY_F11,
+		.active_low	= 1,
+	}, {
+		.desc		= "key32",
+		.code		= KEY_F10,
+		.active_low	= 1,
+	}, {
+		.desc		= "key31",
+		.code		= KEY_F9,
+		.active_low	= 1,
+	}, {
+		.desc		= "key24",
+		.code		= KEY_F8,
+		.active_low	= 1,
+	}, {
+		.desc		= "key23",
+		.code		= KEY_F7,
+		.active_low	= 1,
+	}, {
+		.desc		= "key22",
+		.code		= KEY_F6,
+		.active_low	= 1,
+	}, {
+		.desc		= "key21",
+		.code		= KEY_F5,
+		.active_low	= 1,
+	}, {
+		.desc		= "key14",
+		.code		= KEY_F4,
+		.active_low	= 1,
+	}, {
+		.desc		= "key13",
+		.code		= KEY_F3,
+		.active_low	= 1,
+	}, {
+		.desc		= "key12",
+		.code		= KEY_F2,
+		.active_low	= 1,
+	}, {
+		.desc		= "key11",
+		.code		= KEY_F1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+	.buttons	= baseboard_buttons,
+	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &baseboard_buttons_data,
+	},
+};
+
 static struct platform_device *x3proto_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_device,
 	&r8a66597_usb_host_device,
 	&m66592_usb_peripheral_device,
+	&baseboard_buttons_device,
 };
 
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
 static int __init x3proto_devices_setup(void)
 {
+	int ret, i;
+
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
+	/*
+	 * Now that ILSELs are available, set up the baseboard GPIOs.
+	 */
+	ret = x3proto_gpio_setup();
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Propagate dynamic GPIOs for the baseboard button device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
 	r8a66597_usb_host_resources[1].start =
 		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
 
@@ -145,14 +262,6 @@ static int __init x3proto_devices_setup(void)
 }
 device_initcall(x3proto_devices_setup);
 
-static void __init x3proto_init_irq(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
-	/* Set ICR0.LVLMODE */
-	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
 static void __init x3proto_setup(char **cmdline_p)
 {
 	register_smp_ops(&shx3_smp_ops);
@@ -161,5 +270,4 @@ static void __init x3proto_setup(char **cmdline_p)
 static struct sh_machine_vector mv_x3proto __initmv = {
 	.mv_name		= "x3proto",
 	.mv_setup		= x3proto_setup,
-	.mv_init_irq		= x3proto_init_irq,
 };