clk: meson: meson8b: register the built-in reset controller

The clock controller also includes some reset lines. This patch
implements a reset controller to assert and de-assert these resets.
The reset controller itself is registered early (through
CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot
process (to start the secondary CPU cores).

According to the public S805 datasheet there are two more reset bits
in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by
this patch (as these seem to be unused in Amlogic's vendor Linux kernel
sources and their u-boot tree):
- bit 15: GEN_DIV_SOFT_RESET
- bit 14: SOFT_RESET

All information was taken from the public S805 Datasheet and Amlogic's
vendor GPL kernel sources. This patch is based on an earlier version
submitted by Carlo Caione.

Suggested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

1 files changed, 147 insertions, 12 deletions

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 7629aa09472a..469ee8a84898 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -25,6 +25,8 @@
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 
 #include "clkc.h"
@@ -32,6 +34,13 @@
 
 static DEFINE_SPINLOCK(clk_lock);
 
+static void __iomem *clk_base;
+
+struct meson8b_clk_reset {
+	struct reset_controller_dev reset;
+	void __iomem *base;
+};
+
 static const struct pll_rate_table sys_pll_rate_table[] = {
 	PLL_RATE(312000000, 52, 1, 2),
 	PLL_RATE(336000000, 56, 1, 2),
@@ -691,20 +700,114 @@ static struct clk_divider *const meson8b_clk_dividers[] = {
 	&meson8b_mpeg_clk_div,
 };
 
+static const struct meson8b_clk_reset_line {
+	u32 reg;
+	u8 bit_idx;
+} meson8b_clk_reset_bits[] = {
+	[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+	},
+	[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+	},
+	[CLKC_RESET_SCU_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+	},
+	[CLKC_RESET_CPU3_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+	},
+	[CLKC_RESET_CPU2_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+	},
+	[CLKC_RESET_CPU1_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+	},
+	[CLKC_RESET_CPU0_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+	},
+	[CLKC_RESET_A5_GLOBAL_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+	},
+	[CLKC_RESET_A5_AXI_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+	},
+	[CLKC_RESET_A5_ABP_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+	},
+	[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+	},
+	[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
+		.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+	},
+};
+
+static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
+				    unsigned long id, bool assert)
+{
+	struct meson8b_clk_reset *meson8b_clk_reset =
+		container_of(rcdev, struct meson8b_clk_reset, reset);
+	unsigned long flags;
+	const struct meson8b_clk_reset_line *reset;
+	u32 val;
+
+	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
+		return -EINVAL;
+
+	reset = &meson8b_clk_reset_bits[id];
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	val = readl(meson8b_clk_reset->base + reset->reg);
+	if (assert)
+		val |= BIT(reset->bit_idx);
+	else
+		val &= ~BIT(reset->bit_idx);
+	writel(val, meson8b_clk_reset->base + reset->reg);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+
+static int meson8b_clk_reset_assert(struct reset_controller_dev *rcdev,
+				     unsigned long id)
+{
+	return meson8b_clk_reset_update(rcdev, id, true);
+}
+
+static int meson8b_clk_reset_deassert(struct reset_controller_dev *rcdev,
+				       unsigned long id)
+{
+	return meson8b_clk_reset_update(rcdev, id, false);
+}
+
+static const struct reset_control_ops meson8b_clk_reset_ops = {
+	.assert = meson8b_clk_reset_assert,
+	.deassert = meson8b_clk_reset_deassert,
+};
+
 static int meson8b_clkc_probe(struct platform_device *pdev)
 {
-	void __iomem *clk_base;
 	int ret, clkid, i;
 	struct clk_hw *parent_hw;
 	struct clk *parent_clk;
 	struct device *dev = &pdev->dev;
 
-	/*  Generic clocks and PLLs */
-	clk_base = of_iomap(dev->of_node, 1);
-	if (!clk_base) {
-		pr_err("%s: Unable to map clk base\n", __func__);
+	if (!clk_base)
 		return -ENXIO;
-	}
 
 	/* Populate base address for PLLs */
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
@@ -744,7 +847,7 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 		/* FIXME convert to devm_clk_register */
 		ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[clkid]);
 		if (ret)
-			goto iounmap;
+			return ret;
 	}
 
 	/*
@@ -767,15 +870,11 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 	if (ret) {
 		pr_err("%s: failed to register clock notifier for cpu_clk\n",
 				__func__);
-		goto iounmap;
+		return ret;
 	}
 
 	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
 			&meson8b_hw_onecell_data);
-
-iounmap:
-	iounmap(clk_base);
-	return ret;
 }
 
 static const struct of_device_id meson8b_clkc_match_table[] = {
@@ -794,3 +893,39 @@ static struct platform_driver meson8b_driver = {
 };
 
 builtin_platform_driver(meson8b_driver);
+
+static void __init meson8b_clkc_reset_init(struct device_node *np)
+{
+	struct meson8b_clk_reset *rstc;
+	int ret;
+
+	/* Generic clocks, PLLs and some of the reset-bits */
+	clk_base = of_iomap(np, 1);
+	if (!clk_base) {
+		pr_err("%s: Unable to map clk base\n", __func__);
+		return;
+	}
+
+	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+	if (!rstc)
+		return;
+
+	/* Reset Controller */
+	rstc->base = clk_base;
+	rstc->reset.ops = &meson8b_clk_reset_ops;
+	rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
+	rstc->reset.of_node = np;
+	ret = reset_controller_register(&rstc->reset);
+	if (ret) {
+		pr_err("%s: Failed to register clkc reset controller: %d\n",
+		       __func__, ret);
+		return;
+	}
+}
+
+CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
+		      meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
+		      meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
+		      meson8b_clkc_reset_init);