Merge tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next

- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over

* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
  drm/i915: Update DRIVER_DATE to 20150117
  i915: reuse %ph to dump small buffers
  drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
  drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
  drm/i915: PSR link standby at debugfs
  drm/i915: group link_standby setup and let this info visible everywhere.
  drm/i915: Add missing vbt check.
  drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
  drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
  drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
  drm/i915: Fix kerneldoc for i915 atomic plane code
  drm/i915: Don't pretend SDVO hotplug works on 915
  drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
  drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
  drm/i915: Make hpd arrays big enough to avoid out of bounds access
  Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
  drm/i915: Improve HiZ throughput on Cherryview.
  drm/i915: Reset CSB read pointer in ring init
  drm/i915: Drop unused position fields (v2)
  drm/i915: Move to atomic plane helpers (v9)
  ...

1 files changed, 26 insertions, 28 deletions

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 818ab4e9dabc..8fe5a87705f7 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -45,7 +45,7 @@
  * and related files, but that will be described in separate chapters.
  */
 
-static const u32 hpd_ibx[] = {
+static const u32 hpd_ibx[HPD_NUM_PINS] = {
 	[HPD_CRT] = SDE_CRT_HOTPLUG,
 	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
 	[HPD_PORT_B] = SDE_PORTB_HOTPLUG,
@@ -53,7 +53,7 @@ static const u32 hpd_ibx[] = {
 	[HPD_PORT_D] = SDE_PORTD_HOTPLUG
 };
 
-static const u32 hpd_cpt[] = {
+static const u32 hpd_cpt[HPD_NUM_PINS] = {
 	[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
 	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT,
 	[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
@@ -61,7 +61,7 @@ static const u32 hpd_cpt[] = {
 	[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
 };
 
-static const u32 hpd_mask_i915[] = {
+static const u32 hpd_mask_i915[HPD_NUM_PINS] = {
 	[HPD_CRT] = CRT_HOTPLUG_INT_EN,
 	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
 	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
@@ -70,7 +70,7 @@ static const u32 hpd_mask_i915[] = {
 	[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
 };
 
-static const u32 hpd_status_g4x[] = {
+static const u32 hpd_status_g4x[HPD_NUM_PINS] = {
 	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
 	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
 	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
@@ -79,7 +79,7 @@ static const u32 hpd_status_g4x[] = {
 	[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
 };
 
-static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
+static const u32 hpd_status_i915[HPD_NUM_PINS] = { /* i915 and valleyview are the same */
 	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
 	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
 	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
@@ -1522,7 +1522,7 @@ static inline enum port get_port_from_pin(enum hpd_pin pin)
 static inline void intel_hpd_irq_handler(struct drm_device *dev,
 					 u32 hotplug_trigger,
 					 u32 dig_hotplug_reg,
-					 const u32 *hpd)
+					 const u32 hpd[HPD_NUM_PINS])
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int i;
@@ -4145,26 +4145,24 @@ static void i915_hpd_irq_setup(struct drm_device *dev)
 
 	assert_spin_locked(&dev_priv->irq_lock);
 
-	if (I915_HAS_HOTPLUG(dev)) {
-		hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-		hotplug_en &= ~HOTPLUG_INT_EN_MASK;
-		/* Note HDMI and DP share hotplug bits */
-		/* enable bits are the same for all generations */
-		for_each_intel_encoder(dev, intel_encoder)
-			if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
-				hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
-		/* Programming the CRT detection parameters tends
-		   to generate a spurious hotplug event about three
-		   seconds later.  So just do it once.
-		*/
-		if (IS_G4X(dev))
-			hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-		hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
-		hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
-		/* Ignore TV since it's buggy */
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-	}
+	hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+	hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+	/* Note HDMI and DP share hotplug bits */
+	/* enable bits are the same for all generations */
+	for_each_intel_encoder(dev, intel_encoder)
+		if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
+			hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin];
+	/* Programming the CRT detection parameters tends
+	   to generate a spurious hotplug event about three
+	   seconds later.  So just do it once.
+	*/
+	if (IS_G4X(dev))
+		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+	hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK;
+	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+
+	/* Ignore TV since it's buggy */
+	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 }
 
 static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -4428,14 +4426,14 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
 			dev->driver->irq_postinstall = i915_irq_postinstall;
 			dev->driver->irq_uninstall = i915_irq_uninstall;
 			dev->driver->irq_handler = i915_irq_handler;
-			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		} else {
 			dev->driver->irq_preinstall = i965_irq_preinstall;
 			dev->driver->irq_postinstall = i965_irq_postinstall;
 			dev->driver->irq_uninstall = i965_irq_uninstall;
 			dev->driver->irq_handler = i965_irq_handler;
-			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		}
+		if (I915_HAS_HOTPLUG(dev_priv))
+			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		dev->driver->enable_vblank = i915_enable_vblank;
 		dev->driver->disable_vblank = i915_disable_vblank;
 	}