drm/i915/bxt: add display initialize/uninitialize sequence (PHY)

Add PHY specific display initialization sequence as per BSpec.

Note that the PHY initialization/uninitialization are done
at their current place only for simplicity, in a future patch - when more
of the runtime PM features will be enabled - these will be moved to
power well#1 and modeset encoder enabling/disabling hooks respectively.

The call to uninitialize the PHY during system/runtime suspend will be
added later in this patchset.

v1: Added function definitions in header files
v2: Imre's review comments addressed
- Moved CDCLK related definitions to i915_reg.h
- Removed defintions for CDCLK frequency
- Split uninit_cdclk() by adding a phy_uninit function
- Calculate freq and decimal based on input frequency
- Program SSA precharge based on input frequency
- Use wait_for 1ms instead 200us udelay for DE PLL locking
- Removed initial value for divider, freq, decimal, ratio.
- Replaced polling loops with wait_for
- Parameterized latency optim setting
- Fix the parts where DE PLL has to be disabled.
- Call CDCLK selection from mode set

v3: (imre)
- add note about the plan to move the cdclk/phy init to a better place
- take rps.hw_lock around pcode access
- fix DDI PHY timeout value
- squash in Vandana's "PORT_CL2CM_DW6_A BUN fix",
  "DDI PHY programming register defn", "Do ddi_phy_init always",
- move PHY register macros next to the corresponding CHV/VLV macros
- move DE PLL register macros here from another patch since they are
  used here first
- add BXT_ prefix to CDCLK flags
- s/COMMON_RESET/COMMON_RESET_DIS/ and clarify related code comments
- fix incorrect read value for the RMW of BXT_PHY_CTL_FAMILY_DDI
- fix using GT_DISPLAY_EDP_POWER_ON vs. GT_DISPLAY_DDI_POWER_ON
  when powering on DDI ports
- fix incorrect port when setting BXT_PORT_TX_DW14_LN for DDI ports
- add missing masking when programming CDCLK_FREQ_DECIMAL
- add missing powering on for DDI-C port, rename OCL2_LDOFUSE_PWR_EN
  to OCL2_LDOFUSE_PWR_DIS to reduce confusion
- add note about mismatch with bspec in the PORT_REF_DW6 fields
- factor out PHY init code to a new function, so we can call it for
  PHY1 and PHY0, instead of open-coding the same

v4: (ville)
- split the CDCLK/PHY parts into two patches, update commit message
  accordingly
- use the existing dpio_phy enum instead of adding a new one for the
  same purpose
- flip the meaning of PHYs so that PHY_A is PHY1 and PHY_BC is PHY0 to
  better match CHV
- s/BXT_PHY/_BXT_PHY/
- use _PIPE for _BXT_PHY instead of open-coding it
- drop _0_2_0_GTTMMADR suffix from BXT_P_CR_GT_DISP_PWRON
- define GT_DISPLAY_POWER_ON in a more standard way
- make a note that the CHV ConfigDB also disagrees about GRC_CODE field
  definitions
- fix lane optimization refactoring fumble from v3
- add per PHY uninit functions to match the init counterparts

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 96 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 164350cf760c..6e0913db6e24 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1117,6 +1117,102 @@ enum skl_disp_power_wells {
 #define   DPIO_FRC_LATENCY_SHFIT	8
 #define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8)
 #define   DPIO_UPAR_SHIFT		30
+
+/* BXT PHY registers */
+#define _BXT_PHY(phy, a, b)		_PIPE((phy), (a), (b))
+
+#define BXT_P_CR_GT_DISP_PWRON		0x138090
+#define   GT_DISPLAY_POWER_ON(phy)	(1 << (phy))
+
+#define _PHY_CTL_FAMILY_EDP		0x64C80
+#define _PHY_CTL_FAMILY_DDI		0x64C90
+#define   COMMON_RESET_DIS		(1 << 31)
+#define BXT_PHY_CTL_FAMILY(phy)		_BXT_PHY((phy), _PHY_CTL_FAMILY_DDI, \
+							_PHY_CTL_FAMILY_EDP)
+
+/* BXT PHY common lane registers */
+#define _PORT_CL1CM_DW0_A		0x162000
+#define _PORT_CL1CM_DW0_BC		0x6C000
+#define   PHY_POWER_GOOD		(1 << 16)
+#define BXT_PORT_CL1CM_DW0(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW0_BC, \
+							_PORT_CL1CM_DW0_A)
+
+#define _PORT_CL1CM_DW9_A		0x162024
+#define _PORT_CL1CM_DW9_BC		0x6C024
+#define   IREF0RC_OFFSET_SHIFT		8
+#define   IREF0RC_OFFSET_MASK		(0xFF << IREF0RC_OFFSET_SHIFT)
+#define BXT_PORT_CL1CM_DW9(phy)		_BXT_PHY((phy), _PORT_CL1CM_DW9_BC, \
+							_PORT_CL1CM_DW9_A)
+
+#define _PORT_CL1CM_DW10_A		0x162028
+#define _PORT_CL1CM_DW10_BC		0x6C028
+#define   IREF1RC_OFFSET_SHIFT		8
+#define   IREF1RC_OFFSET_MASK		(0xFF << IREF1RC_OFFSET_SHIFT)
+#define BXT_PORT_CL1CM_DW10(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW10_BC, \
+							_PORT_CL1CM_DW10_A)
+
+#define _PORT_CL1CM_DW28_A		0x162070
+#define _PORT_CL1CM_DW28_BC		0x6C070
+#define   OCL1_POWER_DOWN_EN		(1 << 23)
+#define   DW28_OLDO_DYN_PWR_DOWN_EN	(1 << 22)
+#define   SUS_CLK_CONFIG		0x3
+#define BXT_PORT_CL1CM_DW28(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW28_BC, \
+							_PORT_CL1CM_DW28_A)
+
+#define _PORT_CL1CM_DW30_A		0x162078
+#define _PORT_CL1CM_DW30_BC		0x6C078
+#define   OCL2_LDOFUSE_PWR_DIS		(1 << 6)
+#define BXT_PORT_CL1CM_DW30(phy)	_BXT_PHY((phy), _PORT_CL1CM_DW30_BC, \
+							_PORT_CL1CM_DW30_A)
+
+/* Defined for PHY0 only */
+#define BXT_PORT_CL2CM_DW6_BC		0x6C358
+#define   DW6_OLDO_DYN_PWR_DOWN_EN	(1 << 28)
+
+/* BXT PHY Ref registers */
+#define _PORT_REF_DW3_A			0x16218C
+#define _PORT_REF_DW3_BC		0x6C18C
+#define   GRC_DONE			(1 << 22)
+#define BXT_PORT_REF_DW3(phy)		_BXT_PHY((phy), _PORT_REF_DW3_BC, \
+							_PORT_REF_DW3_A)
+
+#define _PORT_REF_DW6_A			0x162198
+#define _PORT_REF_DW6_BC		0x6C198
+/*
+ * FIXME: BSpec/CHV ConfigDB disagrees on the following two fields, fix them
+ * after testing.
+ */
+#define   GRC_CODE_SHIFT		23
+#define   GRC_CODE_MASK			(0x1FF << GRC_CODE_SHIFT)
+#define   GRC_CODE_FAST_SHIFT		16
+#define   GRC_CODE_FAST_MASK		(0x7F << GRC_CODE_FAST_SHIFT)
+#define   GRC_CODE_SLOW_SHIFT		8
+#define   GRC_CODE_SLOW_MASK		(0xFF << GRC_CODE_SLOW_SHIFT)
+#define   GRC_CODE_NOM_MASK		0xFF
+#define BXT_PORT_REF_DW6(phy)		_BXT_PHY((phy), _PORT_REF_DW6_BC,	\
+						      _PORT_REF_DW6_A)
+
+#define _PORT_REF_DW8_A			0x1621A0
+#define _PORT_REF_DW8_BC		0x6C1A0
+#define   GRC_DIS			(1 << 15)
+#define   GRC_RDY_OVRD			(1 << 1)
+#define BXT_PORT_REF_DW8(phy)		_BXT_PHY((phy), _PORT_REF_DW8_BC,	\
+						      _PORT_REF_DW8_A)
+
+/* BXT PHY TX registers */
+#define _BXT_LANE_OFFSET(lane)           (((lane) >> 1) * 0x200 +	\
+					  ((lane) & 1) * 0x80)
+
+#define _PORT_TX_DW14_LN0_A		0x162538
+#define _PORT_TX_DW14_LN0_B		0x6C538
+#define _PORT_TX_DW14_LN0_C		0x6C938
+#define   LATENCY_OPTIM_SHIFT		30
+#define   LATENCY_OPTIM			(1 << LATENCY_OPTIM_SHIFT)
+#define BXT_PORT_TX_DW14_LN(port, lane)	(_PORT3((port), _PORT_TX_DW14_LN0_A,   \
+							_PORT_TX_DW14_LN0_B,   \
+							_PORT_TX_DW14_LN0_C) + \
+					 _BXT_LANE_OFFSET(lane))
+
 /*
  * Fence registers
  */